NetBSD Problem Report #21914

Received: (qmail 14855 invoked by uid 605); 17 Jun 2003 05:26:31 -0000
Message-Id: <200306170033.08830.vugdeox@freeshell.org>
Date: Tue, 17 Jun 2003 00:33:08 -0500
From: Nate Hill <vugdeox@freeshell.org>
Sender: gnats-bugs-owner@netbsd.org
Reply-To: vugdeox@freeshell.org
To: gnats-bugs@gnats.netbsd.org
Subject: uslattach_timeout shutdown hang

>Number:         21914
>Category:       kern
>Synopsis:       uslattach_timeout shutdown hang
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Jun 17 05:27:00 +0000 2003
>Closed-Date:    
>Last-Modified:  Wed Jun 18 03:59:51 +0000 2003
>Originator:     
>Release:        NetBSD 1.6U
>Organization:
>Environment:
 System: NetBSD dork 1.6U NetBSD 1.6U (DORK2) #0: Mon Jun 16 21:47:46 CDT 2003 vugdeox@dork:/sys/arch/i386/compile/DORK2 i386
 Architecture: i386
 Machine: i386

 NetBSD 1.6U (DORK2) #0: Mon Jun 16 21:47:46 CDT 2003
         vugdeox@dork:/sys/arch/i386/compile/DORK2
 total memory = 255 MB
 avail memory = 234 MB
 using 3297 buffers containing 13188 KB of memory
 BIOS32 rev. 0 found at 0xf1200
 PCI BIOS rev. 2.1 found at 0xf1400
 PCI IRQ Routing Table rev. 1.0 found at 0xf1970, size 144 bytes (7 entries)
 PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
 mainbus0 (root)
 cpu0 at mainbus0: apid 0 (boot processor)
 cpu0: Intel Pentium 4 (686-class), 1494.59 MHz, id 0xf12
 cpu0: features 3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features 3febfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
 cpu0: features 3febfbff<FXSR,SSE,SSE2,SS,HTT,TM>
 cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
 cpu0: L2 cache 256 KB 64b/line 8-way
 cpu0: ITLB 4K/4M: 64 entries
 cpu0: DTLB 4K/4M: 64 entries
 cpu0: calibrating local timer
 cpu0: apic clock running at 99 MHz
 cpu0: 8 page colors
 ioapic0 at mainbus0 apid 2 (I/O APIC)
 ioapic0: pa 0xfec00000, version 20, 24 pins
 acpi0 at mainbus0
 acpi0: X/RSDT: OemId <ASUS  ,P4B_LX  ,42302e31>, AslId <MSFT,31313031>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
 PNP0C01 [System Board] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0A03 [PCI Bus] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0000 [AT Interrupt Controller] at acpi0 not configured
 PNP0200 [AT DMA Controller] at acpi0 not configured
 PNP0100 [AT Timer] at acpi0 not configured
 PNP0B00 [AT Real-Time Clock] at acpi0 not configured
 PNP0800 [AT-style speaker sound] at acpi0 not configured
 npx1 at acpi0 (PNP0C04)
 npx1: io 0xf0-0xff irq 13
 npx1: using exception 16
 fdc1 at acpi0 (PNP0700)
 fdc1: io 0x3f2-0x3f5,0x3f7 irq 6 drq 2
 lpt3 at acpi0 (PNP0400)
 lpt3: io 0x278-0x27f irq 5
 com3 at acpi0 (PNP0501-1)
 com3: io 0x3f8-0x3ff irq 4
 com3: ns16550a, working fifo
 pckbc1 at acpi0 (PNP0303): kbd port
 pckbc1: io 0x60,0x64 irq 1
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 configuring bus 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Intel 82845 Host (rev. 0x03)
 agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
 ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x03)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT2 Model 64 (rev. 
 0x15)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x12)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 rtk0 at pci2 dev 13 function 0: RealTek 8139 10/100BaseTX
 rtk0: interrupting at apic 2 int 21 (irq 9)
 rtk0: Ethernet address 00:e0:18:50:8a:76
 ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
 ukphy0: OUI 0x000000, model 0x0000, rev. 0
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 Texas Instruments TSB12LV26 OHCI IEEE 1394 Host Controller (Firewire serial 
 bus, interface 0x10) at pci2 dev 14 function 0 not configured
 pcib0 at pci0 dev 31 function 0
 pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x12)
 pciide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (ICH2) (rev. 
 0x12)
 pciide0: bus-master DMA support present
 pciide0: primary channel wired to compatibility mode
 wd0 at pciide0 channel 0 drive 0: <Maxtor 4D060H3>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 58627 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 120069936 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd1 at pciide0 channel 0 drive 1: <IBM-DTTA-350640>
 wd1: drive supports 16-sector PIO transfers, LBA addressing
 wd1: 6197 MB, 12592 cyl, 16 head, 63 sec, 512 bytes/sect x 12692736 sectors
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 pciide0: primary channel interrupting at irq 14
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA 
 data transfers)
 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA 
 data transfers)
 pciide0: secondary channel wired to compatibility mode
 atapibus0 at pciide0 channel 1: 2 targets
 cd0 at atapibus0 drive 0: <SONY    CD-RW  CRX175E, , 1.1a> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2
 cd1 at atapibus0 drive 1: <Pioneer DVD-ROM ATAPIModel DVD-117  010, , E1.04> 
 cdrom removable
 cd1: 32-bit data port
 cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
 pciide0: secondary channel interrupting at irq 15
 cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
 cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA 
 data transfers)
 uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x12)
 uhci0: interrupting at apic 2 int 19 (irq 7)
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x12)
 uhci1: interrupting at apic 2 int 23 (irq 9)
 usb1 at uhci1: USB revision 1.0
 uhub1 at usb1
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio
 auich0: interrupting at apic 2 int 17 (irq 10)
 auich0: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
 auich0: variable rate audio
 audio0 at auich0: full duplex, mmap, independent
 isa0 at pcib0
 pcppi0 at isa0 port 0x61
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 isapnp0: no ISA Plug 'n Play devices found
 ioapic0: enabling
 auich0: measured ac97 link rate at 51952 Hz
 uhidev0 at uhub0 port 1 configuration 1 interface 0
 uhidev0: A4Tech USB Optical Mouse, rev 2.00/1.00, addr 2, iclass 3/1
 ums0 at uhidev0: 7 buttons and Z dir.
 wsmouse0 at ums0 mux 0
 wd1: no disk label
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wd1: no disk label
 IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 wd1: no disk label

>Description:
	If I press the front power button on my shiny new -current
	machine (acpi, of course) it spits out this nice message:

	acpi0: power button pressed, shutting down!

	and then tells me:

	syncing...

	then about 15 seconds later I get two uslattach_timeout
	kernel messages.  The machine is entirely dead at this
	point, I can switch between vt's but nothing is running
	(no echo).  I'm forced to do a hard reboot.

	I've also got some other aesthetic issues with acpi mainly
	just strange boot messages.  I'm willing to spend some time
	testing code on my box so, if you notice anything you would
	like to work on just send me a message...

>How-To-Repeat:
         Press my power button!

>Fix:
>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: gnats-admin->kern-bug-people 
Responsible-Changed-By: fair 
Responsible-Changed-When: Wed Jun 18 03:39:12 UTC 2003 
Responsible-Changed-Why:  
malformed PR manually reformatted, and reassigned to default. 
>Unformatted:

Home	PR Database Search