NetBSD Problem Report #32328
From mlelstv@henery.1st.de Sun Dec 18 15:18:20 2005
Return-Path: <mlelstv@henery.1st.de>
Received: from serpens.de (serpens.de [62.208.181.200])
by narn.netbsd.org (Postfix) with ESMTP id 0C14C63B85F
for <gnats-bugs@gnats.NetBSD.org>; Sun, 18 Dec 2005 15:18:20 +0000 (UTC)
Message-Id: <200512181518.jBIFIENo015291@henery.1st.de>
Date: Sun, 18 Dec 2005 16:18:14 +0100 (CET)
From: mlelstv@serpens.de
Reply-To: mlelstv@serpens.de
To: gnats-bugs@netbsd.org
Subject: PCMCIA port doesn't work on Thinkpad T43p
X-Send-Pr-Version: 3.95
>Number: 32328
>Category: kern
>Synopsis: PCMCIA port doesn't work on Thinkpad T43p
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sun Dec 18 15:20:01 +0000 2005
>Last-Modified: Wed Dec 28 21:28:21 +0000 2005
>Originator: mlelstv@serpens.de
>Release: NetBSD 3.0_RC6
>Organization:
>Environment:
System: NetBSD henery 3.0_RC6 NetBSD 3.0_RC6 (HENERY) #7: Sun Dec 18 01:17:56 CET 2005 src@henery:/usr/obj/home/src/sys/arch/i386/compile/HENERY i386
Architecture: i386
Machine: i386
>Description:
Inserting a Lucent WaveLAN PCMCIA card into a Thinkpad T43p yields:
cbb0: wait took 0.076133s
wi0 at pcmcia0 function 0: <Lucent Technologies, WaveLAN/IEEE, Version 01.01, >
wi0:wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: init failed
wi0: failed to attach controller
>How-To-Repeat:
see above
>Fix:
>Audit-Trail:
From: Havard Eidnes <he@NetBSD.org>
To: gnats-bugs@netbsd.org, mlelstv@serpens.de
Cc: kern-bug-people@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org
Subject: Re: kern/32328: PCMCIA port doesn't work on Thinkpad T43p
Date: Sun, 18 Dec 2005 17:02:40 +0100 (CET)
> Inserting a Lucent WaveLAN PCMCIA card into a Thinkpad T43p yields:
>
> cbb0: wait took 0.076133s
> wi0 at pcmcia0 function 0: <Lucent Technologies, WaveLAN/IEEE, Versio=
n 01.01, >
> wi0:wi0: wi_cmd: busy bit won't clear.
> wi0: wi_cmd: busy bit won't clear.
> wi0: wi_cmd: busy bit won't clear.
> wi0: wi_cmd: busy bit won't clear.
> wi0: wi_cmd: busy bit won't clear.
> wi0: init failed
> wi0: failed to attach controller
Please attach a complete dmesg to the PR by replying to this
message, so that the one who is going to look closer at the
problem may see e.g. what cardbus controller you have.
Regards,
- H=E5vard
From: Michael van Elst <mlelstv@serpens.de>
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: kern/32328: PCMCIA port doesn't work on Thinkpad T43p
Date: Sun, 18 Dec 2005 17:11:38 +0100
On Sun, Dec 18, 2005 at 04:05:05PM +0000, Havard Eidnes wrote:
> Please attach a complete dmesg to the PR by replying to this
> message, so that the one who is going to look closer at the
> problem may see e.g. what cardbus controller you have.
Here it is:
NetBSD 3.0_RC6 (HENERY) #9: Sun Dec 18 16:51:20 CET 2005
src@henery:/usr/obj/home/src/sys/arch/i386/compile/HENERY
total memory = 1022 MB
avail memory = 995 MB
BIOS32 rev. 0 found at 0xfd760
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 2261.19 MHz, id 0x6d8
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 2.26GHz"
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep running at 1700 MHz (1388 mV)
cpu0: Enhanced SpeedStep frequencies available (MHz): 1700 600
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <IBM ,TP-1Y ,00001220>, AslId < LTP,00000000>
acpi0: found ECDT, GPE 28
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C01 at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A08 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0800 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0 irq 13
npx1: using exception 16
PNP0B00 at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (IBM0057): aux port
pckbc2: irq 12
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com0 at acpi0 (PNP0501)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
lpt0 at acpi0 (PNP0400)
lpt0: io 0x3bc-0x3be irq 7
com1 at acpi0 (IBM0071)
com1: io 0x2f8-0x2ff irq 3 drq 3
com1: ns16550a, working fifo
acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
IBM0068 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 99.0C passive 65.0C
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2590 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel product 0x2591 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x3154 (rev. 0x80)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5751M Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5751 A1 (0x4101), Ethernet address 00:01:6c:cb:bc:94
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 2: Intel product 0x2664 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci3: interrupting at irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xd3)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0x8d) (chipflags 2)
cbb0: socket base address 0xa8400000
cbb0: intrpin A, intrtag 11
iwi0 at pci4 dev 2 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI Adapter (rev. 0x05)
iwi0: interrupting at irq 11
iwi0: 802.11 address 00:13:ce:76:9c:20
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
CardBus latency timer 0xb0 (b0070504)
PCI latency timer 0x40 (824000)
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [0x44]
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0
pcmcia0 at cardslot0
pccbb_pcmcia_card_detect
pccbbattach: found cardslot
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801FB/FR AC'97 Modem Controller (modem communications, revision 0x03) at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2641 (rev. 0x03)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801FB/FR SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
WARNING: Callback scheduled before sysmon task queue thread present.
auich0: measured ac97 link rate at 48004 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
IPsec: Initialized Security Association Processing.
pccbb_pcmcia_socket_enable: 3V card
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [0x44]
pccbb_power: CARDBUS_VCC_3V and CARDBUS_VPP_VCC [0x11]
cbb0: wait took too long 0.191650s
pccbb_pcmcia_delay: "pccen1" 0x0, sleep 1 ms
pccbb_pcmcia_delay: "pccen2" 0x0, sleep 20 ms
pccbb_pcmcia_alloc_mem: addr 0x40000000 size 0x400, realsize 0x1000
pccbb_pcmcia_mem_map window 0 bus 40000000+0+400 at card addr 0
pccbb_pcmcia_do_mem_map: start 0x40000000 end 0x400003ff off 0xc0000000
pccbb_pcmcia_do_mem_map window 0: 0000 0080 0040 40
wdc0 at pcmcia0 function 0: <SanDisk, SDP, 5/3 0.6>
pccbb_pcmcia_io_alloc alloc port 0x4000+0x10
pccbb_pcmcia_io_map window 0 dynamic port 4000+10
pccbb_pcmcia_do_io_map win 0 addr 0x4000 size 0x10 width 0
start 00 40, stop 0f 40, ioctl 02 enable 60
wdc0: i/o mapped mode
pccbb_intr_establish start. 0x0
pccbb_intr_establish add pil. 0xc194f820
cbb0: pccbb_pcmcia_socket_settype 00 type io 70
pccbb_pcmcia_alloc_mem: addr 0x40000000 size 0x14, realsize 0x1000
pccbb_pcmcia_mem_map window 0 bus 40000000+200+14 at card addr 0
pccbb_pcmcia_do_mem_map: start 0x40000000 end 0x40000213 off 0xc0000000
pccbb_pcmcia_do_mem_map window 0: 0000 0080 0040 40
atabus2 at wdc0 channel 0
ehci0: handing over full speed device on port 5 to uhci2
uhub4: port 5, device disappeared after reset
ehci0: handing over full speed device on port 6 to uhci2
uhub4: port 6, device disappeared after reset
ugen0 at uhub2 port 1
ugen0: Broadcom IBM Bluetooth Module, rev 1.10/0.09, addr 2
wd0 at atabus0 drive 0: <HTS721080G9AT00>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-822S, , 1.61> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
pccbb_pcmcia_socket_disable
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [0x44]
pccbb_pcmcia_delay: "pccwr1" 0x0, sleep 300 ms
ugen1 at uhub2 port 2
ugen1: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 3
pccbb_intr_disestablish start. 0xc194f820
pccbb_intr_disestablish: pil 0xc194f820
pccbb_intr_disestablish frees one pil
pccbb_intr_disestablish frees one pil
pccbb_intr_disestablish: no interrupt handler
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
XFree86 aperture driver version 2.0
Pentium Pro MTRR support enabled
irframe0: SIR
irframe0 attached at tty01
acpibat0: battery info: SANYO, LION, IBM-92P1077, 1385
Here is again the attach messages with CBB_DEBUG enabled:
cbb0: 0x00000000 card inserted, 0x30000410
pccbb_pcmcia_socket_enable: 5V card
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [0x44]
pccbb_power: CARDBUS_VCC_5V and CARDBUS_VPP_VCC [0x15]
cbb0: wait took 0.019580s
pccbb_pcmcia_delay: "pccen1" 0x0, sleep 1 ms
pccbb_pcmcia_delay: "pccen2" 0x0, sleep 20 ms
pccbb_pcmcia_delay: "pccwr0" 0x0, sleep 10 ms
pccbb_pcmcia_delay: "pccwr1" 0x0, sleep 100 ms
pccbb_pcmcia_alloc_mem: addr 0x40000000 size 0x400, realsize 0x1000
pccbb_pcmcia_mem_map window 0 bus 40000000+0+400 at card addr 0
pccbb_pcmcia_do_mem_map: start 0x40000000 end 0x400003ff off 0xc0000000
pccbb_pcmcia_do_mem_map window 0: 0000 0080 0040 40
pccbb_pcmcia_mem_map window 0 bus 40000000+0+400 at card addr 0
pccbb_pcmcia_do_mem_map: start 0x40000000 end 0x400003ff off 0xc0000000
pccbb_pcmcia_do_mem_map window 0: 0000 0080 0000 40
wi0 at pcmcia0 function 0: <Lucent Technologies, WaveLAN/IEEE, Version
01.01, >
pccbb_pcmcia_io_alloc alloc port 0x4000+0x40
pccbb_pcmcia_io_map window 0 dynamic port 4000+40
pccbb_pcmcia_do_io_map win 0 addr 0x4000 size 0x40 width 0
start 00 40, stop 3f 40, ioctl 02 enable 60
pccbb_intr_establish start. 0x0
pccbb_intr_establish add pil. 0xc1b7ca40
cbb0: pccbb_pcmcia_socket_settype 00 type io 70
pccbb_pcmcia_alloc_mem: addr 0x40000000 size 0x14, realsize 0x1000
pccbb_pcmcia_mem_map window 0 bus 40000000+3e0+14 at card addr 0
pccbb_pcmcia_do_mem_map: start 0x40000000 end 0x400003f3 off 0xc0000000
pccbb_pcmcia_do_mem_map window 0: 0000 0080 0040 40
wi0:wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: init failed
wi0: failed to attach controller
pccbb_intr_disestablish start. 0xc1b7ca40
pccbb_intr_disestablish: pil 0xc1b7ca40
pccbb_intr_disestablish frees one pil
pccbb_intr_disestablish frees one pil
pccbb_intr_disestablish: no interrupt handler
pccbb_pcmcia_socket_disable
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [0x44]
pccbb_pcmcia_delay: "pccwr1" 0x0, sleep 300 ms
Please see also kern/32327. Same machine, same PCMCIA, but
this time with a simple CF card adapter.
Greetings,
--
Michael van Elst
Internet: mlelstv@serpens.de
"A potential Snark may lurk in every tree."
From: Hauke Fath <hauke@Espresso.Rhein-Neckar.DE>
To: gnats-bugs@NetBSD.org
Cc: kern-bug-people@NetBSD.org, gnats-admin@NetBSD.org
Subject: Re: kern/32328: PCMCIA port doesn't work on Thinkpad T43p
Date: Sun, 18 Dec 2005 17:37:07 +0100
At 15:20 Uhr +0000 18.12.2005, mlelstv@serpens.de wrote:
>wi0 at pcmcia0 function 0: <Lucent Technologies, WaveLAN/IEEE, Version
>01.01, >
>wi0:wi0: wi_cmd: busy bit won't clear.
>wi0: wi_cmd: busy bit won't clear.
>wi0: wi_cmd: busy bit won't clear.
>wi0: wi_cmd: busy bit won't clear.
>wi0: wi_cmd: busy bit won't clear.
>wi0: init failed
>wi0: failed to attach controller
That's about what I see on sparc with a nell(4) pcmcia-sbus bridge -- see
PR 30549. "This used to work."
hauke
--
"It's never straight up and down" (DEVO)
From: David Brownlee <abs@NetBSD.org>
To: gnats-bugs@netbsd.org
Cc: kern-bug-people@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org
Subject: Re: kern/32328: PCMCIA port doesn't work on Thinkpad T43p
Date: Mon, 19 Dec 2005 11:41:29 +0000 (GMT)
You _may_ have more luck with an ACPI based kernel - (if you do
not already have one). For reference the below is an ACPI based
kernel in a thinkpad T41p, with wi card:
NetBSD 3.0_RC5 (_ACPI_) #22: Thu Dec 8 00:26:55 GMT 2005
root@tll.i:/var/obj/i386/files/netbsd/3/sys/arch/i386/compile/_ACPI_
total memory = 1022 MB
avail memory = 993 MB
BIOS32 rev. 0 found at 0xfd750
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Banias) (686-class), 1698.66 MHz, id 0x695
cpu0: features a7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features a7e9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features a7e9f9bf<FXSR,SSE,SSE2,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1700MHz"
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep running at 1700 MHz (1484 mV)
cpu0: Enhanced SpeedStep frequencies available (MHz): 1700 1400 1200 1000 800 600
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <IBM ,TP-1R ,00003190>, AslId < LTP,00000000>
acpi0: found ECDT, GPE 28
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C01 at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0800 at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0 irq 13
npx0: using exception 16
PNP0B00 at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (IBM0057): aux port
pckbc1: irq 12
acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
IBM0068 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 93.0C passive 61.0C
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility T2 (M10) NT (rev. 0x80)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
cbb1 at pci2 dev 0 function 1: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0d:60:fe:fd:cd
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ath0 at pci2 dev 2 function 0
ath0: interrupting at irq 11
ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 5
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801DB ISA Bridge (rev. 0x01)
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
WARNING: Callback scheduled before sysmon task queue thread present.
auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <TOSHIBA MK1031GAS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <UJDA745 DVD/CDRW, , 1.05> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
[...added card...]
cbb1: wait took 0.016477s
wi0 at pcmcia1 function 0: <MELCO, WLI-PCM-L11, Version 01.01, >
wi0: 802.11 address 00:02:2d:0c:26:b1
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.4.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
--
David/absolute -- www.NetBSD.org: No hype required --
From: Michael van Elst <mlelstv@serpens.de>
To: gnats-bugs@netbsd.org
Cc: kern-bug-people@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org
Subject: Re: kern/32328: PCMCIA port doesn't work on Thinkpad T43p
Date: Mon, 19 Dec 2005 13:09:48 +0100
On Mon, Dec 19, 2005 at 11:45:02AM +0000, David Brownlee wrote:
> You _may_ have more luck with an ACPI based kernel - (if you do
> not already have one). For reference the below is an ACPI based
> kernel in a thinkpad T41p, with wi card:
I do use an ACPI based kernel. However the T41 uses a TI cardbus bridge:
> cbb0 at pci2 dev 0 function 0: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
> cbb1 at pci2 dev 0 function 1: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
The T43 uses:
cbb0 at pci4 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0x8d) (chipflags 2)
the T43 has one Cardbus/PCMCIA slot and one Express-Card slot. I don't
know how the latter is attached.
Greetings,
--
Michael van Elst
Internet: mlelstv@serpens.de
"A potential Snark may lurk in every tree."
From: Michael van Elst <mlelstv@serpens.de>
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: kern/32328 PCMCIA port doesn't work on Thinkpad T43p
Date: Wed, 28 Dec 2005 12:32:39 +0100
The cardbus bridge works fine with Knoppix, but the linux
kernel choses only some "free" 12bit address ranges instead
of a 16bit address at 0x4000.
Forcing our code to chose a 12bit address with
options RBUS_IO_BASE=0xa00
options RBUS_IO_SIZE=0x0ff
makes PCMCIA cards work again.
--
Michael van Elst
Internet: mlelstv@serpens.de
"A potential Snark may lurk in every tree."
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.