NetBSD Problem Report #37972
From woods@once.weird.com Wed Feb 6 23:30:43 2008
Return-Path: <woods@once.weird.com>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
by narn.NetBSD.org (Postfix) with ESMTP id B02A463B853
for <gnats-bugs@gnats.NetBSD.org>; Wed, 6 Feb 2008 23:30:43 +0000 (UTC)
Message-Id: <m1JMsiG-0018KsC@once.weird.com>
Date: Wed, 6 Feb 2008 17:25:52 -0500 (EST)
From: "Greg A. Woods" <woods@planix.ca>
Sender: "Greg A. Woods" <woods@once.weird.com>
Reply-To: "Greg A. Woods" <woods@planix.ca>
To: gnats-bugs@gnats.NetBSD.org
Subject: problems with envstat on Asus PSCH-SR motherboard
X-Send-Pr-Version: 3.95
>Number: 37972
>Category: kern
>Synopsis: problems with envstat on Asus PSCH-SR motherboard
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Wed Feb 06 23:35:00 +0000 2008
>Last-Modified: Tue Mar 25 17:35:01 +0000 2008
>Originator: Greg A. Woods
>Release: NetBSD 4.0_STABLE (2008/02/02)
>Organization:
Planix, Inc.; Toronto, Ontario; Canada
>Environment:
System: NetBSD 4.0_STABLE (GENERIC.MP) i386
Architecture: i386
Machine: i386
>Description:
envstat reports mostly incorrect and incomplete data for my Asus
PSCH-SR based system.
the acpitz(4) driver also complains regularly
Here's the system's dmesg output from a GENERIC.MP kernel with
some additional "verbose" options turned on:
NetBSD 4.0_STABLE (GENERIC.MP) #2: Sat Feb 2 15:29:20 EST 2008
woods@once:/rest/build/woods/once/netbsd-4-i386-i386-ppro-obj/rest/work/woods/m-NetBSD-4/sys/arch/i386/compile/GENERIC.MP
total memory = 2046 MB
rbus: rbus_min_start set to 0x80000000
avail memory = 2000 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfb7a0
SMBIOS rev. 2.3 @ 0xf0000 (42 entries)
PCI BIOS rev. 2.1 found at 0xfb7d0
pcibios: config mechanism [1][x], special cycles [1][x], last bus 3
PCI IRQ Routing Table rev. 1.0 found at 0xfdbb0, size 272 bytes (15 entries)
PCI Interrupt Router at 000:31:0 (Intel 6300ESB LPC Interface Bridge compatible)
PCI Exclusive IRQs: 5 9 10 11
mainbus0 (root)
mainbus0: scanning 0x9a400 to 0x9a7f0 for MP signature
mainbus0: scanning 0x9a000 to 0x9a3f0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf5540
mainbus0: MP config table at 0xf1400, 312 bytes long
tbxface-0196 [01] LoadTables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 546 Objects with 54 Devices 148 Methods 31 Regions
ACPI Namespace successfully loaded at root 0xc0a5e804
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 2992.63 MHz, id 0xf34
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 441d<SSE3,MONITOR,DS-CPL,CID,xTPR>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: enabling thermal monitor 1 ... enabled.
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 32 page colors
cpu0: kstack at 0xccaf7000 for 12288 bytes
cpu0: idle pcb at 0xccaf7000, idle sp at 0xccaf9f98
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel (686-class), 2992.51 MHz, id 0xf34
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 441d<SSE3,MONITOR,DS-CPL,CID,xTPR>
cpu1: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu1: I-cache 12K uOp cache 8-way
cpu1: L2 cache 1 MB 64B/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: using thermal monitor 1
cpu1: kstack at 0xccb00000 for 12288 bytes
cpu1: idle pcb at 0xccb00000, idle sp at 0xccb02f98
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec10000, virtual wire mode, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <IntelR,AWRDACPI,42302e31>, AslId <AWRD,00000000>
evxfevnt-0177 [02] Enable : Transition to ACPI mode successful
evgpeblk-1111 [08] EvCreateGpeBlock : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1211 [07] EvInitializeGpeBlock : Found 7 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:.......................................................................
Initialized 31/31 Regions 9/9 Fields 19/19 Buffers 12/15 Packages (555 nodes)
Executing all Device _STA and_INI methods:...........................................................
59 Devices found - executed 1 _STA, 3 _INI methods
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 3 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: 3 PCI busses
mpacpi: ISA interrupt override 0 -> 2
mpacpi: ISA interrupt override 9 -> 9
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 2 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act Hi,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 31 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 31 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 31 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 29 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 29 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 29 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 29 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 3 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 3 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 3 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 3 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci3 device 8 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci3 device 8 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci3 device 8 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci3 device 8 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci3 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci3 device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci3 device 2 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci3 device 2 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci3 device 3 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci3 device 3 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci3 device 3 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci3 device 3 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci3 device 9 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci3 device 9 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci3 device 9 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci3 device 9 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci3 device 7 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci3 device 7 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci3 device 7 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci3 device 7 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 0 attached to pci2 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci2 device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 2 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 2 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 8 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 8 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 8 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 8 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 7 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 7 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 7 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 7 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci2 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 4 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 4 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci2 device 4 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 5 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci2 device 5 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci2 device 5 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 5 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi_activate_device: PNP0C0F, old status=9
acpi: activated PNP0C0F
acpi_activate_device: PNP0C0F, new status=b
acpi_activate_device: PNP0C0F, old status=9
acpi: activated PNP0C0F
acpi_activate_device: PNP0C0F, new status=b
acpi_activate_device: PNP0C0F, old status=9
acpi: activated PNP0C0F
acpi_activate_device: PNP0C0F, new status=b
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0401 [ECP printer port] at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
INT0800 [Intel FWH Random Number Generator] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 99.0C
acpitz0: failed to evaluate _AC1: AE_NOT_FOUND
acpitz0: failed to evaluate _AC2: AE_NOT_FOUND
acpitz0: failed to evaluate _AC3: AE_NOT_FOUND
acpitz0: failed to evaluate _AC4: AE_NOT_FOUND
acpitz0: failed to evaluate _AC5: AE_NOT_FOUND
acpitz0: failed to evaluate _AC6: AE_NOT_FOUND
acpitz0: failed to evaluate _AC7: AE_NOT_FOUND
acpitz0: failed to evaluate _AC8: AE_NOT_FOUND
acpitz0: failed to evaluate _AC9: AE_NOT_FOUND
acpitz0: failed to evaluate _HOT: AE_NOT_FOUND
acpitz0: critical 99.0C passive 66.0C
apm0 at acpi0: Power Management spec V1.2
apm0: A/C state: unknown
apm0: battery charge state: low
pcppi1: attached to attimer1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1mainbus0: added to list as bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82875P Host (rev. 0x02)
ppb0 at pci0 dev 3 function 0: Intel 82875P PCI-CSA Bridge (rev. 0x02)
pci1 at ppb0 bus 1ppb0: added to list as bus 1
pci1: i/o space, memory space enabled
wm0 at pci1 dev 1 function 0: Intel i82547GI 1000BASE-T Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 18 (irq 10)
wm0: Communication Streaming Architecture
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:11:2f:0c:bb:08
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 0: Intel 6300ESB PCI-X Bridge (rev. 0x02)
pci2 at ppb1 bus 2ppb1: added to list as bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Marvell 88SX5041 SATA (SCSI mass storage, revision 0x03) at pci2 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0: Intel 6300ESB USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 6300ESB USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 9)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
Intel 6300ESB Watchdog Timer (miscellaneous system, revision 0x02) at pci0 dev 29 function 4 not configured
Intel 6300ESB Advanced Interrupt Controller (interrupt system, interface 0x20, revision 0x02) at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7: Intel 6300ESB USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x0a)
pci3 at ppb2 bus 3ppb2: added to list as bus 3
pci3: i/o space, memory space enabled
wm1 at pci3 dev 8 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 0
wm1: interrupting at ioapic0 pin 18 (irq 10)
wm1: 32-bit 33MHz PCI bus
wm1: 64 word (6 address bits) MicroWire EEPROM
wm1: Ethernet address 00:11:2f:0c:bb:09
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vga1 at pci3 dev 9 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 6300ESB LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 6300ESB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 6300ESB Serial ATA/RAID Controller (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 18 (irq 10) for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
Intel 6300ESB SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lm0 at isa0 port 0x290-0x297: Winbond W83627THF Hardware monitor
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int1 90<vector=90,delmode=0,dest=0> 0<target=0>
ioapic0: int3 d1<vector=d1,delmode=0,dest=0> 0<target=0>
ioapic0: int4 d0<vector=d0,delmode=0,dest=0> 0<target=0>
ioapic0: int6 66<vector=66,delmode=0,dest=0> 0<target=0>
ioapic0: int7 92<vector=92,delmode=0,dest=0> 0<target=0>
ioapic0: int9 80a0<vector=a0,delmode=0,level,dest=0> 0<target=0>
ioapic0: int12 91<vector=91,delmode=0,dest=0> 0<target=0>
ioapic0: int14 63<vector=63,delmode=0,dest=0> 0<target=0>
ioapic0: int15 64<vector=64,delmode=0,dest=0> 0<target=0>
ioapic0: int16 a060<vector=60,delmode=0,actlo,level,dest=0> 0<target=0>
ioapic0: int18 a065<vector=65,delmode=0,actlo,level,dest=0> 0<target=0>
ioapic0: int19 a061<vector=61,delmode=0,actlo,level,dest=0> 0<target=0>
ioapic0: int23 a062<vector=62,delmode=0,actlo,level,dest=0> 0<target=0>
ioapic1: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <GCR-8523B, , 1.03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wd0 at atabus1 drive 0: <IBM-DTLA-307030>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29314 MB, 59560 cyl, 16 head, 63 sec, 512 bytes/sect x 60036480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus2 drive 0: <WDC WD2000JD-00HBB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1: mbr partition exceeds disk size
wd2 at atabus3 drive 0: <WDC WD2000JD-00HBB0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2: mbr partition exceeds disk size
ataraid0: found 1 RAID volume
ld0 at ataraid0 vendtype 1 unit 0: Adaptec ATA RAID-1 array
ld0: 186 GB, 24321 cyl, 255 head, 63 sec, 512 bytes/sect x 390721536 sectors
ld0: mbr partition exceeds disk size
ld0: mbr partition exceeds disk size
ld0: mbr partition exceeds disk size
ld0: mbr partition exceeds disk size
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 200c0<vector=c0,delmode=0,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
>How-To-Repeat:
Here are the kernel messages from acpitz(4). They repeat every
15 minutes exactly:
acpitz0: failed to evaluate _AC1: AE_NOT_FOUND
acpitz0: failed to evaluate _AC2: AE_NOT_FOUND
acpitz0: failed to evaluate _AC3: AE_NOT_FOUND
acpitz0: failed to evaluate _AC4: AE_NOT_FOUND
acpitz0: failed to evaluate _AC5: AE_NOT_FOUND
acpitz0: failed to evaluate _AC6: AE_NOT_FOUND
acpitz0: failed to evaluate _AC7: AE_NOT_FOUND
acpitz0: failed to evaluate _AC8: AE_NOT_FOUND
acpitz0: failed to evaluate _AC9: AE_NOT_FOUND
acpitz0: failed to evaluate _HOT: AE_NOT_FOUND
Here's the envstat output. It's pretty much all bogus -- I
think the nearly-correct values are just a coincidence. The
BIOS setup screens show valid values for everything that should
be there. I'll see if I can get a serial console set up and see
if the setup screens redirect properly. The Asus manual shows
more or less the same screens I see.
17:04 [19] $ /usr/sbin/envstat -r
acpitz0 temperature: 55.500 degC
VCore: 4.080 V
+12V: 6.566 V
+3.3V: 1.216 V
+5V: 4.986 V
-12V: 0.473 V
5VSB: 5.040 V
VBAT: 0.000 V
Temp0: -48.000 degC
Temp1: *
Temp2: *
Fan0: *
Fan1: *
Fan2: *
>Fix:
Unknown.
>Audit-Trail:
From: "Greg A. Woods" <woods@planix.ca>
To: NetBSD GNATS <gnats-bugs@NetBSD.org>
Cc:
Subject: Re: kern/37972: problems with envstat on Asus PSCH-SR motherboard (with Winbond W83627THF)
Date: Fri, 22 Feb 2008 16:35:27 -0500
At Wed, 6 Feb 2008 23:35:00 +0000 (UTC), I wrote:
Subject: kern/37972: problems with envstat on Asus PSCH-SR motherboard
>
A -current kernel shows the same problems (once the lm(4) device is
added to the config, that is):
(note all values, including the fans, show up fine in the BIOS screens)
16:30 [3] $ /usr/sbin/envstat -r
acpitz0 temperature: 57.500 degC
VCore: 4.080 V
+12V: 6.688 V
+3.3V: 0.912 V
+5V: 4.986 V
-12V: 0.638 V
5VSB: 5.040 V
VBAT: 0.000 V
Temp0: -48.000 degC
Temp1: *
Temp2: *
Fan0: *
Fan1: *
Fan2: *
16:30 [4] $ what /netbsd
/netbsd
Copyright (c) Cyclades Corporation, 1996, 1999
ZFIRM Cyclades-Z/PCI Firmware V_3.3.1 09/24/99
Copyright (c) Cyclades Corporation, 1996, 1999
ZFIRM Cyclades-Z/PCI Firmware V_3.3.1 09/24/99
NetBSD 4.99.54 (GENERIC) #2: Fri Feb 22 15:58:25 EST 2008
NetBSD 4.99.54 (GENERIC) #2: Fri Feb 22 15:58:25 EST 2008
woods@once:/rest/build/woods/once/current-i386-i386-ppro-obj/rest/work/woods/m-NetBSD-current/sys/arch/i386/compile/GENERIC
total memory = 2046 MB
avail memory = 1995 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUSTeK COMPUTER INC. PSCHSR-A (1.XX)
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel (686-class), 2992.63 MHz, id 0xf34
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 441d<SSE3,DTES64,MONITOR,DS-CPL,CID,xTPR>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: SMT ID 0
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 32 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel (686-class), 2992.61 MHz, id 0xf34
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 441d<SSE3,DTES64,MONITOR,DS-CPL,CID,xTPR>
cpu1: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu1: I-cache 12K uOp cache 8-way
cpu1: L2 cache 1 MB 64B/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: using thermal monitor 1
cpu1: Initial APIC ID 1
cpu1: Cluster/Package ID 0
cpu1: SMT ID 1
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xfec10000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <IntelR,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
UAR2 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
ECP1 (PNP0401) [ECP printer port] at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
PMIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
FWH (INT0800) [Intel FWH Random Number Generator] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNK1 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 99.0C critical 99.0C passive 64.5C
apm1 at acpi0: Power Management spec V1.2
pcppi1: attached to attimer1
pckbd: error setting scanset 2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: unable to establish interrupt for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82875P Host (rev. 0x02)
ppb0 at pci0 dev 3 function 0: Intel 82875P PCI-CSA Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
wm0 at pci1 dev 1 function 0: Intel i82547GI 1000BASE-T Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 18 (irq 10)
wm0: Communication Streaming Architecture
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:11:2f:0c:bb:08
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 0: Intel 6300ESB PCI-X Bridge (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Marvell 88SX5041 SATA (SCSI mass storage, revision 0x03) at pci2 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0: Intel 6300ESB USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 6300ESB USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 9)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
Intel 6300ESB Watchdog Timer (miscellaneous system, revision 0x02) at pci0 dev 29 function 4 not configured
Intel 6300ESB Advanced Interrupt Controller (interrupt system, interface 0x20, revision 0x02) at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7: Intel 6300ESB USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x0a)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
wm1 at pci3 dev 8 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 0
wm1: interrupting at ioapic0 pin 18 (irq 10)
wm1: 32-bit 33MHz PCI bus
wm1: 64 word (6 address bits) MicroWire EEPROM
wm1: Ethernet address 00:11:2f:0c:bb:09
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vga1 at pci3 dev 9 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
pcib0 at pci0 dev 31 function 0
pcib0: Intel 6300ESB LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 6300ESB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 6300ESB Serial ATA/RAID Controller (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 18 (irq 10) for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 6300ESB SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17 (irq 11)
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR SDRAM memory, data ECC, 1024MB, 400MHz, PC-3200
spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lm0 at isa0 port 0x290-0x297
lm0: Winbond W83627THF Hardware monitor
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <GCR-8523B, , 1.03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wd0 at atabus1 drive 0: <IBM-DTLA-307030>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29314 MB, 59560 cyl, 16 head, 63 sec, 512 bytes/sect x 60036480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus2 drive 0: <WDC WD2000JD-00HBB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus3 drive 0: <WDC WD2000JD-00HBB0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Too many symbols for tree, skipping 2220 symbols
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
ataraid0: found 1 RAID volume
ld0 at ataraid0 vendtype 1 unit 0: Adaptec ATA RAID-1 array
ld0: 186 GB, 24321 cyl, 255 head, 63 sec, 512 bytes/sect x 390721536 sectors
RAIDframe: Searching for RAID components...
RAIDframe: wd1d: failed to open raw device: 16
RAIDframe: wd2d: failed to open raw device: 16
RAIDframe: NOTICE: no RAID sets found, no root RAID possible...
opendisk: can't open dev wd1 (16)
opendisk: can't open dev wd2 (16)
opendisk: can't open dev wd1 (16)
opendisk: can't open dev wd2 (16)
opendisk: can't open dev wd1 (16)
opendisk: can't open dev wd2 (16)
boot device: wd0
root on wd0a dumps on wd0b
dump_misc_init: max_paddr = 0x7fee0000
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
Index: sys/arch/i386/conf/GENERIC
===================================================================
RCS file: /cvs/master/m-NetBSD/main/src/sys/arch/i386/conf/GENERIC,v
retrieving revision 1.881
diff -u -r1.881 GENERIC
--- sys/arch/i386/conf/GENERIC 30 Jan 2008 19:58:19 -0000 1.881
+++ sys/arch/i386/conf/GENERIC 20 Feb 2008 03:35:56 -0000
@@ -1,3 +1,5 @@
+# -*-sh-*-
+#
# $NetBSD: GENERIC,v 1.881 2008/01/30 19:58:19 ad Exp $
#
# GENERIC machine description file
@@ -120,13 +122,13 @@
#options BUFQ_PRIOCSCAN
# Diagnostic/debugging support options
-#options DIAGNOSTIC # expensive kernel consistency checks
-#options DEBUG # expensive debugging checks/support
-#options KMEMSTATS # kernel memory statistics (vmstat -m)
+options DIAGNOSTIC # expensive kernel consistency checks
+options DEBUG # expensive debugging checks/support
+options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
-#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
+options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
-#options DDB_VERBOSE_HELP
+options DDB_VERBOSE_HELP
#options KGDB # remote debugger
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
@@ -321,7 +323,7 @@
# Doesn't do anything yet.
#p64h2apic* at pci? dev? function? # P64H2 IOxAPIC
-#apm0 at mainbus0 # Advanced power management
+apm0 at mainbus0 # Advanced power management
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle function
@@ -334,7 +336,7 @@
# Basic Bus Support
#IPMI support
-#ipmi0 at mainbus?
+ipmi0 at mainbus?
# Advanced Configuration and Power Interface
@@ -642,29 +644,29 @@
#aps0 at isa? port 0x1600
# iTE IT87xxF Super I/O with watchdog and sensors support
-#itesio0 at isa? port 0x2e
+itesio0 at isa? port 0x2e
# LM7[89] and compatible hardware monitors
-#lm0 at isa? port 0x290 # other common: 0x280, 0x310
+lm0 at isa? port 0x290 # other common: 0x280, 0x310
# SMSC LPC47B397 hardware monitor functions
-#smsc0 at isa? port 0x02e
+smsc0 at isa? port 0x02e
# PC87366 hardware monitor
-#nsclpcsio* at isa?
-#gpio* at nsclpcsio?
+nsclpcsio* at isa?
+gpio* at nsclpcsio?
# Abit uGuru Hardware system monitor
-#ug0 at isa? port 0xe0
+ug0 at isa? port 0xe0
# VIA VT82C686A/VT8231 Hardware Monitor and Power Management Timer
-#viaenv* at pci? dev ? function ?
+viaenv* at pci? dev ? function ?
# Serial Presence Detect capable memory modules
-#spdmem* at iic? addr 0x50
-#spdmem* at iic? addr 0x51
-#spdmem* at iic? addr 0x52
-#spdmem* at iic? addr 0x53
+spdmem* at iic? addr 0x50
+spdmem* at iic? addr 0x51
+spdmem* at iic? addr 0x52
+spdmem* at iic? addr 0x53
# I2O devices
iop* at pci? dev ? function ? # I/O processor
@@ -676,11 +678,11 @@
#gpio* at gscpcib?
# 1-Wire support
-#gpioow* at gpio? offset 6 mask 0x1 # 1-wire bitbanging via gpio
-#onewire* at gpioow?
+gpioow* at gpio? offset 6 mask 0x1 # 1-wire bitbanging via gpio
+onewire* at gpioow?
# 1-Wire devices
-#owtemp* at onewire? # Temperature sensors
+owtemp* at onewire? # Temperature sensors
# SCSI Controllers and Devices
--
Greg A. Woods
Planix, Inc.
<woods@planix.com> +1 416 489-5852 x122 http://www.planix.com/
From: "Greg A. Woods" <woods@planix.com>
To: NetBSD GNATS <gnats-bugs@NetBSD.org>
Cc:
Subject: Re: kern/37972: problems with envstat on Asus PSCH-SR motherboard
Date: Tue, 25 Mar 2008 13:16:06 -0400
--pgp-sign-Multipart_Tue_Mar_25_13:16:06_2008-1
Content-Type: text/plain; charset=US-ASCII
For the record, now with a serial console attached, and with the BIOS
serial console redirection enabled, and with a whole lot of banging on
keys to somehow get into setup mode on the serial console, I can finally
show the Hardware Monitor screens that display the correct values for
all the hardware sensors:
Phoenix - Award BIOS CMOS Setup Utility
Power
+-----------------------------------------------------+------------------------+
| Hardware Monitor | Select Menu |
|-----------------------------------------------------+------------------------|
| * Voltage Monitor | Item Specific Help** |
| * Smart Q-Fan Configuration | |
| CPU Temperature 64 C/147 F | Press Enter to view |
| M/B Front Temperature 46 C/114 F | |
| M/B Rear Temperature 51 C/123 F | |
| CPU Fan1 speed 5201 RPM | |
| CPU Fan2 speed 0 RPM | |
| Front Fan1 speed 4398 RPM | |
| Front Fan2 speed 4398 RPM | |
| Rear Fan1 speed 4648 RPM | |
| Rear Fan2 speed 0 RPM | |
| | |
| | |
| | |
| | |
| | |
| | |
+-----------------------------------------------------+------------------------+
F1:Help ^V:Select Item -/+: Change Value F5:Setup Defaults
ESC:Exit ><:Select Menu Enter: Select SubMenu F10:Save and Exit
Phoenix - Award BIOS CMOS Setup Utility
Power
+-----------------------------------------------------+------------------------+
| Voltage Monitor | Select Menu |
|-----------------------------------------------------+------------------------|
| CPU VCORE A (V) 1.33 V | Item Specific Help*****|
| +3.3V Voltage 3.34 V | |
| +12V Voltage 11.73 V | |
| +1.5V Voltage 1.45 V | |
| +2.5V Voltage 2.60 V | |
| +5VCC Voltage 4.96 V | |
| +5VSB Voltage 4.94 V | |
| VBAT Voltage 3.10 V | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
+-----------------------------------------------------+------------------------+
F1:Help ^V:Select Item -/+: Change Value F5:Setup Defaults
ESC:Exit ><:Select Menu Enter: Select SubMenu F10:Save and Exit
Phoenix - Award BIOS CMOS Setup Utility
Power
+-----------------------------------------------------+------------------------+
| Smart Q-Fan Configuration | Select Menu |
|-----------------------------------------------------+------------------------|
| Smart Fan Temperature [60 C/140 F] | Item Specific Help*****|
| | |
| | Automatically adjusts |
| | CPU fan speeds |
| | according to system |
| | temperature. |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
+-----------------------------------------------------+------------------------+
F1:Help ^V:Select Item -/+: Change Value F5:Setup Defaults
ESC:Exit ><:Select Menu Enter: Select SubMenu F10:Save and Exit
--
Greg A. Woods
Planix, Inc.
<woods@planix.com> +1 416 489-5852 x122 http://www.planix.com/
--pgp-sign-Multipart_Tue_Mar_25_13:16:06_2008-1
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0i for non-commercial use
MessageID: FgGcf/Ry+jMRWc9lm5+cmn46eX+i7fT/
iQA/AwUBR+kzVmZ9cbd4v/R/EQJOTwCeI3LFNy3n8ycJBKsCfYvEtrbHSk0AoNrt
YnIA8HTP3+zRK586mFJPCdms
=Fyue
-----END PGP SIGNATURE-----
--pgp-sign-Multipart_Tue_Mar_25_13:16:06_2008-1--
From: Juan RP <xtraeme@gmail.com>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: kern/37972: problems with envstat on Asus PSCH-SR motherboard
Date: Tue, 25 Mar 2008 18:25:25 +0100
On Tue, 25 Mar 2008 17:20:02 +0000 (UTC)
"Greg A. Woods" <woods@planix.com> wrote:
> For the record, now with a serial console attached, and with the BIOS
> serial console redirection enabled, and with a whole lot of banging
> on keys to somehow get into setup mode on the serial console, I can
> finally show the Hardware Monitor screens that display the correct
> values for all the hardware sensors:
So have you tried the aiboost(4) driver? if you have an ACPI device named
ATK0110, it should report the correct data.
--
Juan Romero Pardines - xtraeme at gmail|netbsd dot org
The NetBSD Project
Make your own NetBSD/x86 Live CD:
http://www.netbsd.org/~xtraeme/mklivecd/
From: Juan RP <xtraeme@gmail.com>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: kern/37972: problems with envstat on Asus PSCH-SR motherboard
Date: Tue, 25 Mar 2008 18:33:09 +0100
On Tue, 25 Mar 2008 17:30:02 +0000 (UTC)
Juan RP <xtraeme@gmail.com> wrote:
> So have you tried the aiboost(4) driver? if you have an ACPI device
> named ATK0110, it should report the correct data.
I see that you don't have this in the DSDT, too bad, this driver is so nice...
--
Juan Romero Pardines - xtraeme at gmail|netbsd dot org
The NetBSD Project
Make your own NetBSD/x86 Live CD:
http://www.netbsd.org/~xtraeme/mklivecd/
(Contact us)
$NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.
Home