NetBSD Problem Report #42445

From www@NetBSD.org  Sat Dec 12 20:37:18 2009
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
	by www.NetBSD.org (Postfix) with ESMTP id 3528163C423
	for <gnats-bugs@gnats.NetBSD.org>; Sat, 12 Dec 2009 20:37:18 +0000 (UTC)
Message-Id: <20091212203717.AAAB163C421@www.NetBSD.org>
Date: Sat, 12 Dec 2009 20:37:17 +0000 (UTC)
From: timetraveler@epenguin.zzn.com
Reply-To: timetraveler@epenguin.zzn.com
To: gnats-bugs@NetBSD.org
Subject: 3c575 network card problems, device timeout, very slow ping times
X-Send-Pr-Version: www-1.0

>Number:         42445
>Category:       kern
>Synopsis:       3c575 network card problems, device timeout, very slow ping times
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Dec 12 20:40:00 +0000 2009
>Originator:     T. Traveler
>Release:        NetBSD 5.0.1
>Organization:
Time Patrol
>Environment:
NetBSD l27 5.0.1 NetBSD 5.0.1 (CARDBUS) #3: Sat Dec  5 23:31:46 PST 2009  root@l27:/usr/src/sys/arch/i386/compile/CARDBUS i386
>Description:
I had to build my own kernel but that didn't help. Searching around I found that building a kernel without ACPI might help. But was unable to do that, apparently it is not possible to build a kernel without ACPI. Found the boot -2 flag and got that to work but pinging a host through the card gives me 10 second ping times and ex0: device timeout.

Also have found that unplugging the card causes the laptop to reboot.
This card works under a winxp laptop and in this laptop when running linux.

PCI BIOS rev. 2.1 found at 0xfd8bc
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xfdf10, size 208 bytes (11 entries)
PCI Interrupt Router at 000:01:0
PIR Entry 0:
	Bus: 0  Device: 1
		INTA: link 0x06 bitmap 0xde00
		INTB: link 0x00 bitmap 0xdef8
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 1:
	Bus: 0  Device: 2
		INTA: link 0x09 bitmap 0x1e00
		INTB: link 0x0a bitmap 0x1e00
		INTC: link 0x07 bitmap 0x1e00
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 2:
	Bus: 0  Device: 6
		INTA: link 0x0c bitmap 0xde00
		INTB: link 0x0d bitmap 0xde00
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 3:
	Bus: 0  Device: 9
		INTA: link 0x08 bitmap 0xde00
		INTB: link 0x00 bitmap 0xdef8
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 4:
	Bus: 0  Device: 10
		INTA: link 0x01 bitmap 0xde00
		INTB: link 0x02 bitmap 0xde00
		INTC: link 0x03 bitmap 0xde00
		INTD: link 0x04 bitmap 0xde00
PIR Entry 5:
	Bus: 2  Device: 0
		INTA: link 0x01 bitmap 0xde00
		INTB: link 0x00 bitmap 0xdef8
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 6:
	Bus: 2  Device: 1
		INTA: link 0x02 bitmap 0xde00
		INTB: link 0x00 bitmap 0xdef8
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 7:
	Bus: 2  Device: 4
		INTA: link 0x01 bitmap 0xde00
		INTB: link 0x02 bitmap 0xde00
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 8:
	Bus: 2  Device: 2
		INTA: link 0x03 bitmap 0xde00
		INTB: link 0x00 bitmap 0xdef8
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 9:
	Bus: 0  Device: 0
		INTA: link 0x00 bitmap 0xdef8
		INTB: link 0x00 bitmap 0xdef8
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
PIR Entry 10:
	Bus: 0  Device: 11
		INTA: link 0x05 bitmap 0xde00
		INTB: link 0x00 bitmap 0xdef8
		INTC: link 0x00 bitmap 0xdef8
		INTD: link 0x00 bitmap 0xdef8
pci_intr_fixup: no compatible PCI ICU found
Warning: unable to fix up PCI interrupt routing
mainbus0 (root)
cpu0 at mainbus0: AMD 686-class, 1595MHz, id 0xf48

pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x10de product 0x00d1 (rev. 0xa4)
agp0 at pchb0: 1 Miscellaneous Control unit(s) found.
agp0: aperture at 0xf0000000, size 0x8000000
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x10de product 0x00d0 (rev. 0xa6)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x00d4 (rev. 0xa4)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x00d7 (rev. 0xa5)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 2 function 1: vendor 0x10de product 0x00d7 (rev. 0xa5)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 2 function 2: vendor 0x10de product 0x00d8 (rev. 0xa2)
ehci0: interrupting at irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
auich0 at pci0 dev 6 function 0: nForce3 MCP-T AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
vendor 0x10de product 0x00d9 (modem communications, revision 0xa2) at pci0 dev 6 function 1 not configured
viaide0 at pci0 dev 8 function 0
viaide0: NVIDIA nForce3 IDE Controller (rev. 0xa5)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
ppb0 at pci0 dev 10 function 0: vendor 0x10de product 0x00dd (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
rtk0 at pci1 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 11

rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x14e4 product 0x4320 (miscellaneous network, revision 0x03) at pci1 dev 2 function 0 not configured
cbb0 at pci1 dev 4 function 0: vendor 0x104c product 0xac54 (rev. 0x01)
cbb1 at pci1 dev 4 function 1: vendor 0x104c product 0xac54 (rev. 0x01)
vendor 0x104c product 0x8201 (miscellaneous system, revision 0x01) at pci1 dev 4 function 2 not configured
cbb0: cacheline 0x8 lattimer 0x40
cbb0: bhlc 0x824008
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 2 cacheline 0x8, lattimer 0x40
pcmcia0 at cardslot0
cbb1: cacheline 0x8 lattimer 0x40
cbb1: bhlc 0x824008
cbb1: interrupting at irq 11
cardslot1 at cbb1
cardbus1 at cardslot1: bus 3 cacheline 0x8, lattimer 0x40
pcmcia1 at cardslot1
ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x00d2 (rev. 0xa4)
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled
vga1 at pci2 dev 0 function 0: vendor 0x10de product 0x0176 (rev. 0xa3)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
pchb1 at pci0 dev 24 function 0
pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1595942520 Hz quality -100
auich0: measured ac97 link rate at 47996 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
ex0 at cardbus0 function 0: 3Com 3c575CT Ethernet
tqphy0 at ex0 phy 0: 78Q2120 10/100 media interface, rev. 11
tqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

>How-To-Repeat:

>Fix:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.