NetBSD Problem Report #43935

From www@NetBSD.org  Mon Oct  4 08:26:34 2010
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
	by www.NetBSD.org (Postfix) with ESMTP id 6C1B563B9F9
	for <gnats-bugs@gnats.NetBSD.org>; Mon,  4 Oct 2010 08:26:34 +0000 (UTC)
Message-Id: <20101004082634.3334A63B8F3@www.NetBSD.org>
Date: Mon,  4 Oct 2010 08:26:34 +0000 (UTC)
From: wkx9dragon@126.com
Reply-To: wkx9dragon@126.com
To: gnats-bugs@NetBSD.org
Subject: Can't boot with acpi
X-Send-Pr-Version: www-1.0

>Number:         43935
>Category:       port-amd64
>Synopsis:       Can't boot with acpi
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    port-amd64-maintainer
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Oct 04 08:30:00 +0000 2010
>Closed-Date:    Mon Feb 12 07:06:07 +0000 2018
>Last-Modified:  Mon Feb 12 07:06:07 +0000 2018
>Originator:     wkx9dragon
>Release:        netbsd 5.1RC4
>Organization:
cnooc
>Environment:
NetBSD 5.99.39 (wkx_kernel_test) #0: Mon Oct  4 14:54:24 CST 2010
	wkx@NetBSD:/tmp/sys/arch/amd64/compile/wkx_kernel_test
>Description:
My computer have been running without "no acpi" and it do cannot install with "acpi" from netbsd 4 to netbsd 5.99.39.
I  boot my computer with debugging. It stopped. result:init_x86_64() at netbsd:init_x86_64+0xb37.
Reboot, I have a result with dmesg.


::dmesg
NetBSD 5.99.39 (wkx_kernel_test) #0: Mon Oct  4 14:54:24 CST 2010
    wkx@NetBSD:/tmp/sys/arch/amd64/compile/wkx_kernel_test
total memory = 8190 MB
avail memory = 7924 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MICRO-STAR INTERNATIONAL CO.,LTD MS-7550 (1.0)
mainbus0 (root)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100528/tbfadt-655)
cpu0 at mainbus0 apid 0: AMD 686-class, 2800MHz, id 0x100f42
cpu1 at mainbus0 apid 1: AMD 686-class, 2800MHz, id 0x100f42
cpu2 at mainbus0 apid 2: AMD 686-class, 2800MHz, id 0x100f42
cpu3 at mainbus0 apid 3: AMD 686-class, 2800MHz, id 0x100f42
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20100528
acpi0: X/RSDT: OemId <7550MS,A7550100,20091215>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
P001 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
P002 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
P003 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
P004 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
P005 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
P006 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
BROD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
OMSC (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9600 (rev. 0x00)
ppb0 at pci0 dev 2 function 0: vendor 0x1022 product 0x9603 (rev. 0x00)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x9442 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon 4800 Series
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI RS600 HDMI
hdafg0: DAC00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz 16/16
audio0 at hdafg0: half duplex, playback
ppb1 at pci0 dev 5 function 0: vendor 0x1022 product 0x9605 (rev. 0x00)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 9 function 0: vendor 0x1022 product 0x9608 (rev. 0x00)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x02)
re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:21:85:9d:f0:98
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.1, 6 ports, 32 command slots, features 0xf722e080
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: applying AMD SB600/SB700 USB freeze workaround
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: applying AMD SB600/SB700 USB freeze workaround
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0
piixpm0: vendor 0x1002 product 0x4385 (rev. 0x3a)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus6 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus7 at ixpide0 channel 1
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Realtek ALC888
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DAC02 2ch: SPDIF Out [Jack]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz 16/16 20/32 24/32
audio1 at hdafg1: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)
ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space enabled
ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2800318660 Hz quality 3000
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
uhub6 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
ahcisata0 port 4: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <WDC WD10EARS-00Y5B1>
wd0: drive supports 16-sector PIO transfers, LBA4s/sect x 1953525168 sectors

>How-To-Repeat:

>Fix:

>Release-Note:

>Audit-Trail:

State-Changed-From-To: open->feedback
State-Changed-By: jruoho@NetBSD.org
State-Changed-When: Sun, 12 Jun 2011 13:12:30 +0000
State-Changed-Why:

Can you clarify this a little? What does it mean that "it do cannot install
with acpi from netbsd 4 to netbsd 5.99.39"? The dmesg you appended appears
to be from 5.99.39 and ACPI is enabled. Additionally, can you try a kernel
from the most recent -current, and if the problem still occurs, post the
exact message where the boot stops.



From: wkx9dragon <wkx9dragon@126.com>
To: NetBSD Problem Report DB Administrator <gnats@NetBSD.org>
Subject: Re:Reminder of 1 NetBSD Problem Report awaiting feedback
Date: Wed, 31 Aug 2011 10:27:50 +0800 (CST)

 Sorry, I do not use it really! My problem have been . I update my PC bios, it has been here.


State-Changed-From-To: feedback->closed
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Sun, 13 Nov 2011 20:24:30 +0000
State-Changed-Why:
I am not sure I'm reading it correctly but I think that feedback means
"I updated the BIOS and now it works"


From: wkx9dragon <wkx9dragon@126.com>
To: gnats-bugs@NetBSD.org
Cc: port-amd64-maintainer@netbsd.org, netbsd-bugs@netbsd.org, 
	gnats-admin@netbsd.org, dholland@NetBSD.org
Subject: Re:Re: port-amd64/43935 (Can't boot with acpi)
Date: Tue, 15 Nov 2011 14:24:19 +0800 (CST)

 Sorry,I do not know how I reply email about the problem. I updated the BIOS and now it do not can works if I use ACPI." Now I wait for netbsd 6.0 that I hope it can resolve the problem.


State-Changed-From-To: closed->open
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Thu, 17 Nov 2011 01:55:50 +0000
State-Changed-Why:
ok, I misunderstood: it is *not* fixed.

(you can reply by sending mail to gnats-bugs@netbsd.org; make sure the
Subject: line begins with "Re: port-amd64/43935".)


From: wkx9dragon <wkx9dragon@126.com>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: port-amd64/43935 (Can't boot with acpi)
Date: Tue, 22 Nov 2011 22:02:20 +0800

 I can boot without acpi, it do work very good. But I can't boot with
 acpi, if I select ACPI , my computer do die!. I see that my computer
 boot with ACPI that netbsd 5.9.x sometime, but it don't each time. Now I
 hope 6.0 version resolve the problem.


From: Paul Goyette <paul@whooppee.com>
To: gnats-bugs@netbsd.org
Cc: wkx9dragon <wkx9dragon@126.com>
Subject: Re: port-amd64/43935 (Can't boot with acpi)
Date: Sat, 20 May 2017 12:13:48 +0800 (+08)

 > Now I hope 6.0 version resolve the problem.

 Have you been able to test this on either 6.x or 7.x release?  Is it
 still a problem?

 If yes, please provide complete start-up messages that show the actual 
 failure (ie, boot with acpi enabled and send us the complete log).



 +------------------+--------------------------+----------------------------+
 | Paul Goyette     | PGP Key fingerprint:     | E-mail addresses:          |
 | (Retired)        | FA29 0E3B 35AF E8AE 6651 | paul at whooppee dot com   |
 | Kernel Developer | 0786 F758 55DE 53BA 7731 | pgoyette at netbsd dot org |
 +------------------+--------------------------+----------------------------+

From: wkx9dragon <wkx9dragon@126.com>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: port-amd64/43935 (Can't boot with acpi)
Date: Thu, 15 Jun 2017 19:12:06 +0800

 Thank you, I can't use it any more. My computer is so old that I have to 
 upgrade my computer.
 >   



State-Changed-From-To: open->closed
State-Changed-By: maxv@NetBSD.org
State-Changed-When: Mon, 12 Feb 2018 07:06:07 +0000
State-Changed-Why:
If you ever come back to your previous machine, and are still having
this issue, please re-submit a new PR with more information. I'm closing
this PR.


>Unformatted:

Home	PR Database Search