NetBSD Problem Report #44896

From jmmv+mini.jmmv@julipedia.org  Fri Apr 22 14:59:40 2011
Return-Path: <jmmv+mini.jmmv@julipedia.org>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
	by www.NetBSD.org (Postfix) with ESMTP id C8EC263B842
	for <gnats-bugs@gnats.netbsd.org>; Fri, 22 Apr 2011 14:59:39 +0000 (UTC)
Message-Id: <20110422145931.A8B8562F33C@mini.julipedia.org>
Date: Fri, 22 Apr 2011 15:59:31 +0100 (IST)
From: jmmv+mini.jmmv@julipedia.org
Reply-To: jmmv+mini.jmmv@julipedia.org
To: gnats-bugs@gnats.NetBSD.org
Subject: Kernel seems unable to initialize screen on boot
X-Send-Pr-Version: 3.95

>Number:         44896
>Category:       port-macppc
>Synopsis:       Kernel seems unable to initialize screen on boot
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-macppc-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Fri Apr 22 15:00:00 +0000 2011
>Last-Modified:  Thu Jul 21 03:35:31 +0000 2011
>Originator:     Julio Merino
>Release:        NetBSD 5.99.49
>Organization:

>Environment:


System: NetBSD mini.julipedia.org 5.99.49 NetBSD 5.99.49 (GENERIC) #1: Sun Apr 17 08:45:23 IST 2011 builder@mini.julipedia.org:/home/builder/obj/usr/src/sys/arch/macppc/compile/GENERIC macppc
Architecture: powerpc
Machine: macppc
>Description:
	After installing NetBSD on a Mac Mini G4 1.2GHz, the system can
	boot correctly iff I manually drop into the OF prompt first and
	type "boot" from there.

	The auto-boot functionality does not work correctly: it seems as
	if the kernel starts but it fails to initialize the screen.  The
	screen remains blank and the system is unresponsive.

	Defining the following in OF lets auto-boot work, but this workaround
	should not be necessary (it's not for Linux):

	boot-command=." hello" cr " screen" output boot

	Please note that the fact that the screen remains blank may be
	unrelated to this problem.  It is possible that the problem happens
	much earlier in the kernel boot process, but I can't debug this.

	I'm attaching the kernel log below after the Fix section.
>How-To-Repeat:
	1) Install NetBSD onto the hard disk of a Mac Mini G4.
	2) Set the following OF properties (or similar):
	   boot-device=hd:,\ofwboot.xcf
	   boot-file=netbsd
	3) Type 'reset-all' and drop into the OF prompt again.
	4) Type 'boot' and see that the system boots fine.
	5) Reboot and let auto-boot start NetBSD.
	6) See a white screen and an unresponsive machine.

	7) ... define the boot-command mentioned above and see how auto-boot
	   starts working.
>Fix:
	Unknown.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.49 (GENERIC) #1: Sun Apr 17 08:45:23 IST 2011
	builder@mini.julipedia.org:/home/builder/obj/usr/src/sys/arch/macppc/compile/GENERIC
total memory = 1024 MB
avail memory = 984 MB
timecounter: Timecounters tick every 10.000 msec
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
bootpath: /pci@f4000000/ata-6@d/disk@0:0/netbsd
mainbus0 (root)
cpu0 at mainbus0: 7447A (Revision 1.2), ID 0 (primary)
cpu0: HID0 0x84d0c1bc<EMCP,EICE,DOZE,NAP,DPM,ICE,DCE,IFEM,SGE,BTIC,FBIOB,ABE,BHT>, powersave: 1
cpu0: 1250.00 MHz, 512KB L2 cache no parity parity enabled
memory0 at mainbus0: len=128
spdmem0 at memory0
spdmem0: DDR SDRAM, no parity or ECC, 1GB, 333MHz (PC-2700)
spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
uni_n0 at mainbus0 address 0xf8000000
hw-clock at uni_n0 not configured
ki2c0 at uni_n0 address 0xf8001000
iic1 at ki2c0: I2C bus
cereal at ki2c0 address 0x1c0 not configured
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 9200 5962
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 350000
radeonfb0: using static EDID
max_dotclock according to supported modes: 78750
radeonfb0: using static EDID
max_dotclock according to supported modes: 78750
radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000
radeonfb0: display 0: initial virtual resolution 1280x768 at 8 bpp
radeonfb0: port 0: physical 1280x768 60Hz
radeonfb0: port 1: physical 1280x768 60Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at radeonfb0 not configured
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
bwi0 at pci1 dev 18 function 0: Broadcom Wireless
bwi0: interrupting at irq 52
bwi0: BBP id 0x4306, BBP rev 0x3, BBP pkg 0
bwi0: MAC: rev 5
bwi0: PHY type 2, rev 2, ver 2
bwi0: RF manu 0x17f, type 0x2050, rev 2
bwi0: invalid antenna gain in sprom
bwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
bwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at obio0 offset 0x10000: irq 30,1,2
pmu0 at obio0 offset 0x16000 irq 47:  rev. 85
pmu0: initializing IIC bus
pmu0: initializing RTC
pmu0: power-mgt not configured
pmu0: pmu-pwm-fans not configured
ki2c1 at obio0
iic2 at ki2c1: I2C bus
cereal at ki2c1 address 0x1c0 not configured
wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer
atabus0 at wdc0 channel 0
snapper0: software codec
audio0 at snapper0: full duplex, playback, capture
ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
ehci0 at pci1 dev 27 function 2: NEC USB Host Controller (rev. 0x04)
ehci0: interrupting at irq 63
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci3 ohci4
usb3 at ehci0: USB revision 2.0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
fwohci0: interrupting at irq 40
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:24:ff:fe:76:e8:3e
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
gem0: interrupting at irq 41
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: Ethernet address 00:11:24:76:e8:3e, 10KB RX fifo, 4KB TX fifo
biomask 8003ffe netmask 8003ffe ttymask 8003ffe
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 41620907 Hz quality 100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
uhub0 at usb0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <MATSHITADVD-R   UJ-835F, , GGND> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0 at atabus1 drive 0
wd0: <ST9808210A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA)
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Apple Computer Bluetooth HCI (HID-proxy mode), rev 2.00/15.86, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Apple Computer Bluetooth HCI (HID-proxy mode), rev 2.00/15.86, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
ugen0 at uhub1 port 1
ugen0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
root file system type: ffs
uhidev2 at uhub2 port 1 configuration 1 interface 0
uhidev2: Dell Dell USB Keyboard, rev 1.10/3.06, addr 2, iclass 3/1
ukbd1 at uhidev2
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0

>Release-Note:

>Audit-Trail:

>Unformatted:

Home	PR Database Search