NetBSD Problem Report #53047

From www@NetBSD.org  Thu Feb 22 00:48:50 2018
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
	(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
	(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
	by mollari.NetBSD.org (Postfix) with ESMTPS id A08A57A10E
	for <gnats-bugs@gnats.NetBSD.org>; Thu, 22 Feb 2018 00:48:50 +0000 (UTC)
Message-Id: <20180222004849.A6E407A262@mollari.NetBSD.org>
Date: Thu, 22 Feb 2018 00:48:49 +0000 (UTC)
From: andrew.cagney@gmail.com
Reply-To: andrew.cagney@gmail.com
To: gnats-bugs@NetBSD.org
Subject: run0 doesn't work with WPA base station
X-Send-Pr-Version: www-1.0

>Number:         53047
>Category:       kern
>Synopsis:       run0 doesn't work with WPA base station
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Feb 22 00:50:00 +0000 2018
>Last-Modified:  Fri Feb 23 17:30:00 +0000 2018
>Originator:     Andrew Cagney
>Release:        NetBSD 8.0_BETA
>Organization:
>Environment:
NetBSD 8.0_BETA (ODROID-C1) #3: Wed Jan 17 22:30:46 EST 2018
        netbsd-build/8/evbearmv7hf-el/sys/arch/evbarm/compile/ODROID-C1
...
run0 at uhub2 port 1
run0: Ralink (0xb05) 802.11 n WLAN (0x1784), rev 2.00/1.01, addr 3
run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
e0:cb:e0:cb:b1:32
run0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
run0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
(asus N13 USB)

>Description:
wpa_supplicant, according to wpa_cli is forever scanning.

Reproduced on amd64 and arm.

On the amd64 I was able to confirm that it was't my config.  Pointing wpa_supplicant at the built-in WIFI worked.

>How-To-Repeat:

>Fix:

>Release-Note:

>Audit-Trail:

From: Martin Husemann <martin@duskware.de>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: kern/53047: run0 doesn't work with WPA base station
Date: Thu, 22 Feb 2018 09:45:21 +0100

 On Thu, Feb 22, 2018 at 12:50:00AM +0000, andrew.cagney@gmail.com wrote:
 > >Synopsis:       tun0 doesn't work with WPA base station

 I switched that to "run0" - I guess that is what you mean?

 Does "ifconfig -v run0" show any received pkts or errors?

 Martin

From: Andrew Cagney <andrew.cagney@gmail.com>
To: gnats-bugs@netbsd.org
Cc: kern-bug-people@netbsd.org, gnats-admin@netbsd.org, netbsd-bugs@netbsd.org
Subject: Re: kern/53047: run0 doesn't work with WPA base station
Date: Fri, 23 Feb 2018 12:26:45 -0500

 Yes, run0.

 Here's abbreviated output (any missing value is 0) from the arm (amd
 looks the same):

 # ifconfig -v run0 | grep -v ': 0$'
 run0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         ssid "" -rts -frag nwkey 65536:"","","",""
         powersave off
         address: e0:cb:e0:cb:b1:32
         media: IEEE802.11 autoselect (DS1)
         status: no network
         input: 0 packets, 0 bytes
         output: 5175 packets, 0 bytes
         rx from wrong bssid: 9
         rx discard mgt frames: 16
         active scans started: 347
         inet6 fe80::e2cb:e0ff:fecb:b132%run0/64 flags 0x0 scopeid 0x2

>Unformatted:

Home	PR Database Search