NetBSD Problem Report #57144
From www@netbsd.org Thu Dec 29 05:03:22 2022
Return-Path: <www@netbsd.org>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
by mollari.NetBSD.org (Postfix) with ESMTPS id 62AE31A9239
for <gnats-bugs@gnats.NetBSD.org>; Thu, 29 Dec 2022 05:03:22 +0000 (UTC)
Message-Id: <20221229050318.08B4B1A923A@mollari.NetBSD.org>
Date: Thu, 29 Dec 2022 05:03:17 +0000 (UTC)
From: mayuresh@acm.org
Reply-To: mayuresh@acm.org
To: gnats-bugs@NetBSD.org
Subject: No HDMI output, no touchpad recognized on AMD Radeon based laptop
X-Send-Pr-Version: www-1.0
>Number: 57144
>Category: port-amd64
>Synopsis: No HDMI output, no touchpad recognized on AMD Radeon based laptop
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-amd64-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Thu Dec 29 05:05:00 +0000 2022
>Last-Modified: Sun Jan 01 08:15:02 +0000 2023
>Originator: Mayuresh
>Release: 10.0_BETA (GENERIC) #0: Mon Dec 26 11:25:01 UTC 2022
>Organization:
>Environment:
NetBSD lenovon 10.0_BETA NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 19 14:00:35 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
>Description:
Possibly these are two separate issues, though logging together so that all logs don't need to be replicated.
1. The touchpad on this device is not recognized on NetBSD.
On Ubuntu it is recognized as
[ 14.087338] elan_i2c i2c-ELAN0621:00: Elan Touchpad: Module ID: 0x005b, Firmware: 0x0001, Sample: 0x0002, IAP: 0x000d
[ 14.087503] input: Elan Touchpad as /devices/platform/AMD0010:00/i2c-0/i2c-ELAN0621:00/input/input10
2. There is no output on HDMI monitor during boot and so on startx well.
dmesg says:
[ 1.047474] drm at genfb0 not configured
[ 1.026354] drm at genfb0 not configured
Complete dmesg -vx log on NetBSD
--------------------------------
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020, 2021, 2022
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 19 14:00:35 UTC 2022
[ 1.000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 7647 MB
[ 1.000000] avail memory = 7369 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000004] efi: systbl at pa df4be018
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000DFBFE014 000024 (v02 LENOVO)
[ 1.000004] ACPI: XSDT 0x00000000DFBD9188 0000C4 (v01 LENOVO CB-01 00000001 01000013)
[ 1.000004] ACPI: FACP 0x00000000DFBF9000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: DSDT 0x00000000DFBEB000 008D37 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: FACS 0x00000000DFB85000 000040
[ 1.000004] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: ASF! 0x00000000DFBFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: BOOT 0x00000000DFBFA000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: HPET 0x00000000DFBF8000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: APIC 0x00000000DFBF7000 000090 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: MCFG 0x00000000DFBF6000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SPCR 0x00000000DFBF5000 000050 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: UEFI 0x00000000DFBF4000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBEA000 0006B2 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE5000 004B5B (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: IVRS 0x00000000DFBE4000 0000D0 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: CRAT 0x00000000DFBE3000 0002E8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE2000 000482 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: TPM2 0x00000000DFBE1000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE0000 000174 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBDE000 0015B7 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBDC000 00165E (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: FPDT 0x00000000DFBDB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: BGRT 0x00000000DFBDA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
[ 1.000004] ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 0x21, 32 pins
[ 1.000004] cpu0 at mainbus0 apid 16
[ 1.000004] cpu0: Use mfence to serialize rdtsc
[ 1.000004] cpu0: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G , id 0x670f00
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 17
[ 1.000004] cpu1: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G , id 0x670f00
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <LENOVO,CB-01 ,00000001>, AslId < ,01000013>
[ 1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.045984] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.045984] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.047474] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[ 1.047474] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[ 1.047474] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
[ 1.047474] acpiout0: brightness levels: [2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72,74,76,78,80,82,84,86,88,90,92,94,96,98,100]
[ 1.047474] I2SC at acpivga0 not configured
[ 1.047474] acpivga0: connected output devices:
[ 1.047474] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.047474] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.047474] acpivga0: 0x0200: TV, head 0
[ 1.047474] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.047474] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.047474] RTKC (RTK0000) at acpi0 not configured
[ 1.047474] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.047474] spkr0 at pcppi1: PC Speaker
[ 1.047474] wsbell at spkr0 not configured
[ 1.047474] midi0 at pcppi1: PC speaker
[ 1.047474] sysbeep0 at pcppi1
[ 1.047474] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
[ 1.047474] pckbc1 at acpi0 (KBC0, FUJ7401) (kbd port): io 0x60,0x64 irq 1
[ 1.047474] MEM (PNP0C01) at acpi0 not configured
[ 1.047474] VPC0 (VPC2004) at acpi0 not configured
[ 1.047474] acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery
[ 1.047474] acpibat0: ACPI 4.0 functionality present
[ 1.047474] acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
[ 1.047474] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1.047474] acpilid1 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.047474] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.047474] GPIO (AMD0030) at acpi0 not configured
[ 1.047474] GPS0 (BCM4752) at acpi0 not configured
[ 1.047474] dwiic0 at acpi0 (I2CA, AMD0010-0): mem 0xfedc2000-0xfedc2fff irq 3
[ 1.047474] resource type 0x11 ignored
[ 1.047474] iic0 at dwiic0: I2C bus
[ 1.047474] ihidev0 at iic0 addr 0x15: vendor 0x4f3 product 0x400, TPD1
[ 1.047474] ihidev0: 11 report ids
[ 1.047474] ihidev0: autoconfiguration error: no IRQ resource
[ 1.047474] NFC1 (BCM2F25) at acpi0 not configured
[ 1.047474] acpiwmi0 at acpi0 (WMI4, PNP0C14-WBAT): ACPI WMI Interface
[ 1.047474] acpiwmibus at acpiwmi0 not configured
[ 1.047474] TPM (MSFT0101) at acpi0 not configured
[ 1.047474] attimer1: attached to pcppi1
[ 1.047474] pckbd0 at pckbc1 (kbd slot)
[ 1.047474] pckbc1: using irq 1 for kbd slot
[ 1.047474] wskbd0 at pckbd0: console keyboard
[ 1.047474] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.047474] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.047474] amdsmn0 at pci0 dev 0 function 0: AMD System Management Network
[ 1.047474] amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family15h)
[ 1.047474] AMD 15h/6xh IOMMU (IOMMU system) at pci0 dev 0 function 2 not configured
[ 1.047474] genfb0 at pci0 dev 1 function 0: ATI Technologies Radeon R2/R3/R4/R5 Graphics (rev. 0xea)
[ 1.047474] genfb0: framebuffer at 0xe0000000, size 1024x768, depth 32, stride 4096
[ 1.047474] genfb0: shadow framebuffer enabled, size 3072 KB
[ 1.047474] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[ 1.047474] wsmux1: connecting to wsdisplay0
[ 1.047474] drm at genfb0 not configured
[ 1.047474] hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
[ 1.047474] hdaudio0: interrupting at msi0 vec 0
[ 1.047474] hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
[ 1.047474] hdafg0 at hdaudio0: ATI R6xx HDMI
[ 1.047474] hdafg0: HDMI00 2ch: Digital Out [Jack]
[ 1.047474] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
[ 1.047474] audio0 at hdafg0: playback
[ 1.047474] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.047474] spkr1 at audio0: PC Speaker (synthesized)
[ 1.047474] wsbell at spkr1 not configured
[ 1.047474] pchb0 at pci0 dev 2 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.047474] ppb0 at pci0 dev 2 function 2: AMD 15h/6xh Root Port (rev. 0x00)
[ 1.047474] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.047474] ppb0: link is x1 @ 2.5GT/s
[ 1.047474] pci1 at ppb0 bus 1
[ 1.047474] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.047474] re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x15)
[ 1.047474] re0: interrupting at msix1 vec 0
[ 1.047474] re0: RTL8168H/8111H (0x5400)
[ 1.047474] re0: Ethernet address 9c:5a:44:79:91:8d
[ 1.047474] re0: using 256 tx descriptors
[ 1.047474] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
[ 1.047474] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[ 1.047474] ppb1 at pci0 dev 2 function 4: AMD 15h/6xh Root Port (rev. 0x00)
[ 1.047474] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.047474] ppb1: link is x1 @ 2.5GT/s
[ 1.047474] pci2 at ppb1 bus 2
[ 1.047474] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.047474] Realtek Semiconductor RTL8821CE 802.11ac PCIe NIC (miscellaneous network) at pci2 dev 0 function 0 not configured
[ 1.047474] pchb1 at pci0 dev 3 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.047474] AMD 15h/6xh PSP (miscellaneous crypto) at pci0 dev 8 function 0 not configured
[ 1.047474] pchb2 at pci0 dev 9 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.047474] hdaudio1 at pci0 dev 9 function 2: HD Audio Controller
[ 1.047474] hdaudio1: interrupting at ioapic1 pin 22
[ 1.047474] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.047474] hdafg1 at hdaudio1: Realtek product 0236
[ 1.047474] hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[ 1.047474] hdafg1: ADC01 2ch: Mic In [Built-In]
[ 1.047474] hdafg1: ADC02 2ch: Mic In [Jack]
[ 1.047474] hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[ 1.047474] audio1 at hdafg1: playback, capture, full duplex, independent
[ 1.047474] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.047474] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.047474] spkr2 at audio1: PC Speaker (synthesized)
[ 1.047474] wsbell at spkr2 not configured
[ 1.047474] xhci0 at pci0 dev 16 function 0: AMD FCH xHCI (rev. 0x20)
[ 1.047474] xhci0: 64-bit DMA
[ 1.047474] xhci0: interrupting at msix2 vec 0
[ 1.047474] xhci0: xHCI version 1.0
[ 1.047474] usb0 at xhci0: USB revision 3.0
[ 1.047474] usb1 at xhci0: USB revision 2.0
[ 1.047474] ahcisata0 at pci0 dev 17 function 0: AMD FCH SATA AHCI (rev. 0x4b)
[ 1.047474] ahcisata0: 64-bit DMA
[ 1.047474] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf733ff01<PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[ 1.047474] ahcisata0: interrupting at ioapic0 pin 19
[ 1.047474] atabus0 at ahcisata0 channel 0
[ 1.047474] atabus1 at ahcisata0 channel 1
[ 1.047474] ehci0 at pci0 dev 18 function 0: AMD FCH EHCI (rev. 0x49)
[ 1.047474] ehci0: 32-bit DMA
[ 1.047474] ehci0: interrupting at ioapic0 pin 18
[ 1.047474] ehci0: BIOS has given up ownership
[ 1.047474] ehci0: EHCI version 1.0
[ 1.047474] ehci0: Using DMA subregion for control data structures
[ 1.047474] usb2 at ehci0: USB revision 2.0
[ 1.047474] piixpm0 at pci0 dev 20 function 0: AMD X370/X399 SMBus Controller (rev. 0x4b)
[ 1.047474] piixpm0: interrupting at SMI,
[ 1.047474] iic1 at piixpm0 port 0: I2C bus
[ 1.047474] iic2 at piixpm0 port 1: I2C bus
[ 1.047474] pcib0 at pci0 dev 20 function 3: AMD FCH LPC (rev. 0x11)
[ 1.047474] pchb3 at pci0 dev 24 function 0: AMD 15h/7xh HyperTransport Configuration (rev. 0x00)
[ 1.047474] pchb4 at pci0 dev 24 function 1: AMD 15h/7xh Address Map Configuration (rev. 0x00)
[ 1.047474] pchb5 at pci0 dev 24 function 2: AMD 15h/7xh DRAM Configuration (rev. 0x00)
[ 1.047474] pchb6 at pci0 dev 24 function 3: AMD 15h/7xh North Bridge Configuration (rev. 0x00)
[ 1.047474] pchb7 at pci0 dev 24 function 4: AMD 15h/7xh CPU C-state Configuration (rev. 0x00)
[ 1.047474] pchb8 at pci0 dev 24 function 5: AMD 15h/7xh Miscellaneous Configuration (rev. 0x00)
[ 1.047474] isa0 at pcib0
[ 1.047474] acpicpu0 at cpu0: ACPI CPU
[ 1.047474] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.047474] acpicpu0: C2: I/O, lat 400 us, pow 0 mW
[ 1.047474] acpicpu0: P0: FFH, lat 4 us, pow 9460 mW, 2600 MHz
[ 1.047474] acpicpu0: P1: FFH, lat 4 us, pow 7380 mW, 2400 MHz
[ 1.047474] acpicpu0: P2: FFH, lat 4 us, pow 5795 mW, 2200 MHz
[ 1.047474] acpicpu0: P3: FFH, lat 4 us, pow 4500 mW, 1900 MHz
[ 1.047474] acpicpu0: P4: FFH, lat 4 us, pow 3217 mW, 1600 MHz
[ 1.047474] acpicpu0: P5: FFH, lat 4 us, pow 2598 mW, 1300 MHz
[ 1.047474] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.047474] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.047474] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.047474] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.047474] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.047474] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.047474] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.047474] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.047474] acpicpu1 at cpu1: ACPI CPU
[ 1.047474] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.047474] timecounter: Timecounter "TSC" frequency 2595138000 Hz quality 3000
[ 1.189653] acpibat0: LENOVO Li-Ion rechargeable battery
[ 1.189653] acpibat0: granularity: low->warn 0.264 Wh, warn->full 3.780 Wh
[ 1.189653] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.199119] uhub0: 4 ports with 4 removable, self powered
[ 1.199119] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.199119] uhub1: 4 ports with 4 removable, self powered
[ 1.199119] acpiacad0: AC adapter online.
[ 1.199119] acpivga0: connected output devices:
[ 1.199119] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.199119] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.199119] acpivga0: 0x0200: TV, head 0
[ 1.199119] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.199119] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.199119] acpivga0: connected output devices:
[ 1.199119] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.199119] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.199119] acpivga0: 0x0200: TV, head 0
[ 1.199119] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.199119] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.199119] IPsec: Initialized Security Association Processing.
[ 1.219218] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.219218] uhub2: 2 ports with 2 removable, self powered
[ 1.299218] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 1.299218] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 1.329215] wd0 at atabus0 drive 0
[ 1.329215] wd0: <TOSHIBA MQ04ABF100>
[ 1.329215] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 1.329215] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 1.349217] wd0: GPT GUID: 829ca912-c411-4bf9-820e-b9ecad0d2553
[ 1.349217] dk0 at wd0: "bed6b46c-83bc-4e7f-86ef-dc4aa73b187a", 614400 blocks at 4096, type: msdos
[ 1.349217] dk1 at wd0: "80818f9f-4d94-4ffa-b29a-74c30754a155", 1258291200 blocks at 618496, type: ext2fs
[ 1.349217] dk2 at wd0: "be1e5856-4e07-2044-bf2a-0efd58efdba0", 694615439 blocks at 1258909696, type: ffs
[ 1.359217] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
[ 1.359217] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
[ 1.359217] atapibus0 at atabus1: 1 targets
[ 1.369117] cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GUE0N, KVNJ7GE0413, T.02> cdrom removable
[ 1.379215] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[ 1.379215] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
[ 1.629216] uhub3 at uhub0 port 2: Microchip Tech (0x0424) USB5744 (0x5744), class 9/0, rev 3.10/2.86, addr 1
[ 1.629216] uhub3: 2 ports with 2 removable, self powered
[ 1.689216] uhub4 at uhub1 port 2: Microchip Tech (0x0424) USB2744 (0x2744), class 9/0, rev 2.10/2.86, addr 2
[ 1.689216] uhub4: multiple transaction translators
[ 1.689216] uhub4: 4 ports with 4 removable, self powered
[ 2.209216] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 2.209216] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.209216] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.209216] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.269217] uhub5 at uhub2 port 1: vendor 0438 (0x0438) product 7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
[ 2.269217] uhub5: single transaction translator
[ 2.269217] uhub5: 4 ports with 4 removable, self powered
[ 2.449117] uhidev0 at uhub4 port 3 configuration 1 interface 0
[ 2.449117] uhidev0: SIGMACHIP (0x1c4f) USB Keyboard (0x0002), rev 1.10/1.50, addr 3, iclass 3/1
[ 2.449117] ukbd0 at uhidev0
[ 2.449117] wskbd1 at ukbd0 mux 1
[ 2.459118] wskbd1: connecting to wsdisplay0
[ 2.459118] uhidev1 at uhub4 port 3 configuration 1 interface 1
[ 2.459118] uhidev1: SIGMACHIP (0x1c4f) USB Keyboard (0x0002), rev 1.10/1.50, addr 3, iclass 3/0
[ 2.459118] uhidev1: 2 report ids
[ 2.459118] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
[ 2.459118] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
[ 2.879215] uhidev2 at uhub4 port 4 configuration 1 interface 0
[ 2.879215] uhidev2: PixArt (0x17ef) Lenovo USB Optical Mouse (0x608d), rev 2.00/1.00, addr 4, iclass 3/1
[ 2.879215] ums0 at uhidev2: 3 buttons and Z dir
[ 2.879215] wsmouse0 at ums0 mux 0
[ 2.999216] ubt0 at uhub5 port 2
[ 2.999216] ubt0: Realtek (0x0bda) Bluetooth Radio (0xc024), rev 1.10/1.10, addr 3
[ 3.209215] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 3.209215] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.209215] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.209215] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.509212] uvideo0 at uhub5 port 3 configuration 1 interface 0: Sonix Technology Co., Ltd. (0x174f) EasyCamera (0x241a), rev 2.00/0.13, addr 4
[ 3.509212] video0 at uvideo0: Sonix Technology Co., Ltd. (0x174f) EasyCamera (0x241a), rev 2.00/0.13, addr 4
[ 3.509212] swwdog0: software watchdog initialized
[ 3.589114] WARNING: 1 error while detecting hardware; check system log.
[ 3.589114] boot device: wd0
[ 3.589114] root on dk2
[ 3.599214] root file system type: ffs
[ 3.599214] kern.module.path=/stand/amd64/10.0/modules
[ 4.219213] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 4.219213] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 4.219213] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 4.219213] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 5.629212] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 5.629212] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 5.629212] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 5.629212] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 7.109212] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 7.109212] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 7.109212] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 7.109212] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 8.109207] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 8.109207] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 8.109207] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 8.109207] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 10.719106] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 10.719106] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 10.729106] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 10.729106] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 22.909411] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 22.909411] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 22.909411] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 22.909411] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 30.489566] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 30.489566] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 30.489566] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 30.489566] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 84.010652] syncing disks... done
[ 84.010652] unmounted procfs on /proc type procfs
[ 84.010652] unmounted ptyfs on /dev/pts type ptyfs
[ 84.010652] unmounted kernfs on /kern type kernfs
[ 84.090557] uhub3: detached
[ 84.090557] cd0: detached
[ 84.090557] atapibus0: detached
[ 84.090557] uhub0: detached
[ 84.090557] iic2: detached
[ 84.090557] iic1: detached
[ 84.090557] atabus1: detached
[ 84.090557] usb0: detached
[ 84.090557] pci2: detached
[ 84.090557] sysbeep0: detached
[ 84.090557] midi0: detached
[ 84.090557] pchb8: detached
[ 84.090557] pchb7: detached
[ 84.090557] pchb6: detached
[ 84.090557] pchb5: detached
[ 84.090557] pchb4: detached
[ 84.090557] pchb3: detached
[ 84.090557] pchb2: detached
[ 84.090557] pchb1: detached
[ 84.090557] ppb1: detached
[ 84.090557] pchb0: detached
[ 84.090557] dk1 at wd0 (80818f9f-4d94-4ffa-b29a-74c30754a155) deleted
[ 84.090557] dk1: detached
[ 84.090557] dk0 at wd0 (bed6b46c-83bc-4e7f-86ef-dc4aa73b187a) deleted
[ 84.090557] dk0: detached
[ 84.110654] forcefully unmounted /dev/dk2 on / type ffs
[ 84.110654] dk2 at wd0 (be1e5856-4e07-2044-bf2a-0efd58efdba0) deleted
[ 84.110654] wd0: detached
[ 84.110654] atabus0: detached
[ 84.110654] ahcisata0: detached
[ 84.110654] rebooting...
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020, 2021, 2022
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 19 14:00:35 UTC 2022
[ 1.000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 7647 MB
[ 1.000000] avail memory = 7369 MB
[ 1.000000] pool redzone disabled for 'buf2k'
[ 1.000000] pool redzone disabled for 'buf4k'
[ 1.000000] pool redzone disabled for 'buf32k'
[ 1.000000] pool redzone disabled for 'buf64k'
[ 1.000000] entropy: no seed from bootloader
[ 1.000000] pool redzone disabled for 'sigacts'
[ 1.000000] pool redzone disabled for 'mclpl'
[ 1.000000] pool redzone disabled for 'dirhashblk'
[ 1.000000] pool redzone disabled for 'dirhashblk'
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000004] efi: systbl at pa df4be018
[ 1.000004] efi: systbl mapped at va ffffd7020ca8b018
[ 1.000004] efi: signature 5453595320494249 revision 20032 crc32 35304d26
[ 1.000004] efi: firmware revision 51500023
[ 1.000004] efi: runtime services at pa 0xdf4bee98
[ 1.000004] efi: boot services at pa 0x0
[ 1.000004] efi: cfgtbl at pa df26a298
[ 1.000004] efi: cfgtbl mapped at va ffffd7020ca8d298
[ 1.000004] efi: 18 cfgtbl entries:
[ 1.000004] efi: 0xddfbee18 dba6a7e3-bb57-4be7-8af8-d578db7e5687
[ 1.000004] efi: 0xddfbef58 a31280ad-481e-41b6-95e8-127f4c984779
[ 1.000004] efi: 0xd8821ad0 05ad34ba-6f02-4214-952e-4da0398e2bb9
[ 1.000004] efi: 0xddfb1018 7739f24c-93d7-11d4-9a3a-0090273fc14d
[ 1.000004] efi: 0xd8822610 4c19049f-4137-4dd3-9c10-8b97a83ffdfa
[ 1.000004] efi: 0xd8822fb0 49152e77-1ada-4764-b7a2-7afefed95e8b
[ 1.000004] efi: 0xdf3c7ed8 92888eba-e125-4c41-bc9d-683e8f7e6118
[ 1.000004] efi: 0xdfbfe014 8868e871-e4f1-11d3-bc22-0080c73c8881 ACPI 2.0
[ 1.000004] efi: 0xdf32cdd8 fb7dddd1-b22f-4b55-ae3e-48da29f9b18b
[ 1.000004] efi: 0xdf32ce18 54dc0985-7972-416f-8ca1-3ea096fade26
[ 1.000004] efi: 0xdf32cc98 59894b3e-d150-4530-b006-7cc35d70b487
[ 1.000004] efi: 0xdf83f900 742aaece-5493-4533-9ee4-7e24c93c27e9
[ 1.000004] efi: 0xdf26f000 eb9d2d31-2d88-11d3-9a16-0090273fc14d SMBIOS
[ 1.000004] efi: 0xdf26d000 f2fd1544-9794-4a2c-992e-e5bbcf20e394 SMBIOS3
[ 1.000004] efi: 0xdf270998 b122a263-3661-4f68-9929-78f8b0d62180
[ 1.000004] efi: 0xdd01f018 dcfa911d-26eb-469f-a220-38b7dc461220
[ 1.000004] efi: 0xdf26ae18 d719b2cb-3d3a-4596-a3bc-dad00e67656f
[ 1.000004] efi: 0xdcff6000 c451ed2b-9694-45d3-baba-ed9f8988a389
[ 1.000004] efi_runtime_init: map 24 pages at 0 to 0x88000 type 6 attrs 0x800000000000000f
[ 1.000004] efi_runtime_init: map 512 pages at 0 to 0xdefbf000 type 5 attrs 0x800000000000000f
[ 1.000004] efi_runtime_init: map 768 pages at 0 to 0xdf1bf000 type 6 attrs 0x800000000000000f
[ 1.000004] efi_runtime_init: map 256 pages at 0 to 0xf0100000 type 11 attrs 0x8000000000000000
[ 1.000004] efi_runtime_init: map 16384 pages at 0 to 0xf8000000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 1 pages at 0 to 0xfec00000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 1 pages at 0 to 0xfec10000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 1 pages at 0 to 0xfed80000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 1 pages at 0 to 0xfee00000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 2048 pages at 0 to 0xff800000 type 11 attrs 0x8000000000000001
[ 1.000004] SMBIOS rev. 3.1.1 @ 0xdf26c000
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000DFBFE014 000024 (v02 LENOVO)
[ 1.000004] ACPI: XSDT 0x00000000DFBD9188 0000C4 (v01 LENOVO CB-01 00000001 01000013)
[ 1.000004] ACPI: FACP 0x00000000DFBF9000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: DSDT 0x00000000DFBEB000 008D37 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: FACS 0x00000000DFB85000 000040
[ 1.000004] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: ASF! 0x00000000DFBFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: BOOT 0x00000000DFBFA000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: HPET 0x00000000DFBF8000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: APIC 0x00000000DFBF7000 000090 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: MCFG 0x00000000DFBF6000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SPCR 0x00000000DFBF5000 000050 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: UEFI 0x00000000DFBF4000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBEA000 0006B2 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE5000 004B5B (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: IVRS 0x00000000DFBE4000 0000D0 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: CRAT 0x00000000DFBE3000 0002E8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE2000 000482 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: TPM2 0x00000000DFBE1000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE0000 000174 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBDE000 0015B7 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBDC000 00165E (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: FPDT 0x00000000DFBDB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: BGRT 0x00000000DFBDA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
[ 1.000004] ioapic0: apid is misconfigured (0 != 4)
[ 1.000004] ioapic0: remapped to apic 4
[ 1.000004] ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 0x21, 32 pins
[ 1.000004] ioapic1: apid is misconfigured (0 != 5)
[ 1.000004] ioapic1: remapped to apic 5
[ 1.000004] cpu0 at mainbus0 apid 16
[ 1.000004] cpu0: 16 page colors
[ 1.000004] cpu0: Use mfence to serialize rdtsc
[ 1.000004] cpu0: TSC freq from delay 2609051100 Hz
[ 1.000004] cpu0: [re]calibrating local timer
[ 1.000004] cpu0: apic clock running at 99 MHz
[ 1.000004] cpu0: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G , id 0x670f00
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 17
[ 1.000004] cpu1: 2 page colors
[ 1.000004] cpu1: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G , id 0x670f00
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <LENOVO,CB-01 ,00000001>, AslId < ,01000013>
[ 1.000004] allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
[ 1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[ 1.000004] MCFG: MEMMAP: 0x0000000000000000-0x0000000000087fff, size=0x0000000000088000, type=1(Memory)
[ 1.000004] MCFG: MEMMAP: 0x0000000000088000-0x00000000000bffff, size=0x0000000000038000, type=2(Reserved)
[ 1.000004] MCFG: MEMMAP: 0x0000000000100000-0x00000000defbefff, size=0x00000000deebf000, type=1(Memory)
[ 1.000004] MCFG: MEMMAP: 0x00000000defbf000-0x00000000df8befff, size=0x0000000000900000, type=2(Reserved)
[ 1.000004] MCFG: MEMMAP: 0x00000000df8bf000-0x00000000dfbbefff, size=0x0000000000300000, type=4(NVS)
[ 1.000004] MCFG: MEMMAP: 0x00000000dfbbf000-0x00000000dfbfefff, size=0x0000000000040000, type=3(ACPI)
[ 1.000004] MCFG: MEMMAP: 0x00000000dfbff000-0x00000000dfbfffff, size=0x0000000000001000, type=1(Memory)
[ 1.000004] MCFG: MEMMAP: 0x00000000dfc00000-0x00000000dfffffff, size=0x0000000000400000, type=2(Reserved)
[ 1.000004] MCFG: MEMMAP: 0x00000000f0100000-0x00000000f01fffff, size=0x0000000000100000, type=2(Reserved)
[ 1.000004] MCFG: MEMMAP: 0x00000000f8000000-0x00000000fbffffff, size=0x0000000004000000, type=2(Reserved)
[ 1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.022156] acpi0: ACPI-Fast 32-bit timer
[ 1.022156] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.022156] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.026354] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[ 1.026354] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[ 1.026354] acpivga0: capabilities: _DOS _DOD
[ 1.026354] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
[ 1.026354] acpiout0: capabilities: _BCL _BCM
[ 1.026354] acpiout0: brightness levels: [2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72,74,76,78,80,82,84,86,88,90,92,94,96,98,100]
[ 1.026354] I2SC at acpivga0 not configured
[ 1.026354] acpivga0: connected output devices:
[ 1.026354] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.026354] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.026354] acpivga0: 0x0200: TV, head 0
[ 1.026354] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.026354] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.026354] RTKC (RTK0000) at acpi0 not configured
[ 1.026354] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.026354] spkr0 at pcppi1: PC Speaker
[ 1.026354] wsbell at spkr0 not configured
[ 1.026354] midi0 at pcppi1: PC speaker
[ 1.026354] sysbeep0 at pcppi1
[ 1.026354] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
[ 1.026354] pckbc1 at acpi0 (KBC0, FUJ7401) (kbd port): io 0x60,0x64 irq 1
[ 1.026354] MEM (PNP0C01) at acpi0 not configured
[ 1.026354] VPC0 (VPC2004) at acpi0 not configured
[ 1.026354] acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery
[ 1.026354] acpibat0: ACPI 4.0 functionality present
[ 1.026354] acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
[ 1.026354] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1.026354] acpilid1 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.026354] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.026354] GPIO (AMD0030) at acpi0 not configured
[ 1.026354] GPS0 (BCM4752) at acpi0 not configured
[ 1.026354] dwiic0 at acpi0 (I2CA, AMD0010-0): mem 0xfedc2000-0xfedc2fff irq 3
[ 1.026354] allocated pic ioapic0 type edge pin 3 level 6 to cpu0 slot 1 idt entry 97
[ 1.026354] resource type 0x11 ignored
[ 1.026354] dwiic0: claiming \_SB_.I2CA.TPD0
[ 1.026354] dwiic0: claiming \_SB_.I2CA.TPD1
[ 1.026354] dwiic0: claiming \_SB_.I2CA.TPD2
[ 1.026354] iic0 at dwiic0: I2C bus
[ 1.026354] ihidev0 at iic0 addr 0x15: vendor 0x4f3 product 0x400, TPD1
[ 1.026354] ihidev0: 11 report ids
[ 1.026354] ihidev0: autoconfiguration error: no IRQ resource
[ 1.026354] ihidev0: WARNING: power management not supported
[ 1.026354] NFC1 (BCM2F25) at acpi0 not configured
[ 1.026354] acpiwmi0 at acpi0 (WMI4, PNP0C14-WBAT): ACPI WMI Interface
[ 1.026354] acpiwmi0: {C3A03776-51AC-49AA-AD0F-F2F7D62C3F3C} oid 4441 count 06 flags 05
[ 1.026354] acpiwmi0: {05901221-D566-11D1-B2F0-00A0C9062910} oid 4442 count 01 flags 00
[ 1.026354] acpiwmibus at acpiwmi0 not configured
[ 1.026354] TPM (MSFT0101) at acpi0 not configured
[ 1.026354] attimer1: attached to pcppi1
[ 1.026354] pckbd0 at pckbc1 (kbd slot)
[ 1.026354] allocated pic ioapic0 type edge pin 1 level 6 to cpu0 slot 2 idt entry 98
[ 1.026354] pckbc1: using irq 1 for kbd slot
[ 1.026354] wskbd0 at pckbd0: console keyboard
[ 1.026354] pmsprobe: reset error 5
[ 1.026354] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.026354] acpi0: MCFG: 000:00:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
[ 1.026354] acpi0: MCFG: 000:00:0: Ok (cfg[0x100]=0xffffffff extconf=N)
[ 1.026354] acpi0: MCFG: 000:00:2: invalid config space (cfg[0x100]=0xffffffff, alias=false)
[ 1.026354] acpi0: MCFG: 000:00:2: Ok (cfg[0x100]=0xffffffff extconf=N)
[ 1.026354] acpi0: MCFG: 000:01:0: Ok (cfg[0x100]=0x2701000b extconf=Y)
[ 1.026354] acpi0: MCFG: 000:01:1: Ok (cfg[0x100]=0x0001000b extconf=Y)
[ 1.026354] acpi0: MCFG: 000:02:0: invalid config space (cfg[0x100]=0x157b1022, alias=true)
[ 1.026354] acpi0: MCFG: 000:02:0: Ok (cfg[0x100]=0x157b1022 extconf=N)
[ 1.026354] acpi0: MCFG: 000:02:2: Ok (cfg[0x100]=0x2701000b extconf=Y)
[ 1.026354] acpi0: MCFG: 000:02:4: Ok (cfg[0x100]=0x2701000b extconf=Y)
[ 1.026354] acpi0: MCFG: 000:03:0: invalid config space (cfg[0x100]=0x157b1022, alias=true)
[ 1.026354] acpi0: MCFG: 000:03:0: Ok (cfg[0x100]=0x157b1022 extconf=N)
[ 1.026354] acpi0: MCFG: 000:08:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
[ 1.026354] acpi0: MCFG: 000:08:0: Ok (cfg[0x100]=0x00000000 extconf=N)
[ 1.026354] acpi0: MCFG: 000:09:0: invalid config space (cfg[0x100]=0x157d1022, alias=true)
[ 1.026354] acpi0: MCFG: 000:09:0: Ok (cfg[0x100]=0x157d1022 extconf=N)
[ 1.026354] acpi0: MCFG: 000:09:2: invalid config space (cfg[0x100]=0x00000000, alias=false)
[ 1.026354] acpi0: MCFG: 000:09:2: Ok (cfg[0x100]=0x00000000 extconf=N)
[ 1.026354] acpi0: MCFG: 000:16:0: Ok (cfg[0x100]=0x00010018 extconf=Y)
[ 1.026354] acpi0: MCFG: 000:17:0: invalid config space (cfg[0x100]=0x79011022, alias=true)
[ 1.026354] acpi0: MCFG: 000:17:0: Ok (cfg[0x100]=0x79011022 extconf=N)
[ 1.026354] acpi0: MCFG: 000:18:0: invalid config space (cfg[0x100]=0x79081022, alias=true)
[ 1.026354] acpi0: MCFG: 000:18:0: Ok (cfg[0x100]=0x79081022 extconf=N)
[ 1.026354] acpi0: MCFG: 000:20:0: invalid config space (cfg[0x100]=0x790b1022, alias=true)
[ 1.026354] acpi0: MCFG: 000:20:0: Ok (cfg[0x100]=0x790b1022 extconf=N)
[ 1.026354] acpi0: MCFG: 000:20:3: invalid config space (cfg[0x100]=0x790e1022, alias=true)
[ 1.026354] acpi0: MCFG: 000:20:3: Ok (cfg[0x100]=0x790e1022 extconf=N)
[ 1.026354] acpi0: MCFG: 000:24:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
[ 1.026354] acpi0: MCFG: 000:24:0: Ok (cfg[0x100]=0x00000000 extconf=N)
[ 1.026354] acpi0: MCFG: 000:24:1: invalid config space (cfg[0x100]=0x00000000, alias=false)
[ 1.026354] acpi0: MCFG: 000:24:1: Ok (cfg[0x100]=0x00000000 extconf=N)
[ 1.026354] acpi0: MCFG: 000:24:2: invalid config space (cfg[0x100]=0x00000000, alias=false)
[ 1.026354] acpi0: MCFG: 000:24:2: Ok (cfg[0x100]=0x00000000 extconf=N)
[ 1.026354] acpi0: MCFG: 000:24:3: invalid config space (cfg[0x100]=0x00000000, alias=false)
[ 1.026354] acpi0: MCFG: 000:24:3: Ok (cfg[0x100]=0x00000000 extconf=N)
[ 1.026354] acpi0: MCFG: 000:24:4: invalid config space (cfg[0x100]=0x00000000, alias=false)
[ 1.026354] acpi0: MCFG: 000:24:4: Ok (cfg[0x100]=0x00000000 extconf=N)
[ 1.026354] acpi0: MCFG: 000:24:5: invalid config space (cfg[0x100]=0x00000000, alias=false)
[ 1.026354] acpi0: MCFG: 000:24:5: Ok (cfg[0x100]=0x00000000 extconf=N)
[ 1.026354] acpi0: MCFG: bus 0: valid devices
[ 1.026354] acpi0: MCFG: 000:00:0
[ 1.026354] acpi0: MCFG: 000:00:2
[ 1.026354] acpi0: MCFG: 000:01:0
[ 1.026354] acpi0: MCFG: 000:01:1
[ 1.026354] acpi0: MCFG: 000:02:0
[ 1.026354] acpi0: MCFG: 000:02:2
[ 1.026354] acpi0: MCFG: 000:02:4
[ 1.026354] acpi0: MCFG: 000:03:0
[ 1.026354] acpi0: MCFG: 000:08:0
[ 1.026354] acpi0: MCFG: 000:09:0
[ 1.026354] acpi0: MCFG: 000:09:2
[ 1.026354] acpi0: MCFG: 000:16:0
[ 1.026354] acpi0: MCFG: 000:17:0
[ 1.026354] acpi0: MCFG: 000:18:0
[ 1.026354] acpi0: MCFG: 000:20:0
[ 1.026354] acpi0: MCFG: 000:20:3
[ 1.026354] acpi0: MCFG: 000:24:0
[ 1.026354] acpi0: MCFG: 000:24:1
[ 1.026354] acpi0: MCFG: 000:24:2
[ 1.026354] acpi0: MCFG: 000:24:3
[ 1.026354] acpi0: MCFG: 000:24:4
[ 1.026354] acpi0: MCFG: 000:24:5
[ 1.026354] acpi0: acpimcfg_map_bus done
[ 1.026354] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.026354] amdsmn0 at pci0 dev 0 function 0: AMD System Management Network
[ 1.026354] amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family15h)
[ 1.026354] AMD 15h/6xh IOMMU (IOMMU system) at pci0 dev 0 function 2 not configured
[ 1.026354] genfb0 at pci0 dev 1 function 0: ATI Technologies Radeon R2/R3/R4/R5 Graphics (rev. 0xea)
[ 1.026354] genfb0: recycling existing fb mapping at ffffd7020c648000
[ 1.026354] genfb0: framebuffer at 0xe0000000, size 1024x768, depth 32, stride 4096
[ 1.026354] genfb0: shadow framebuffer enabled, size 3072 KB
[ 1.026354] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[ 1.026354] wsmux1: connecting to wsdisplay0
[ 1.026354] drm at genfb0 not configured
[ 1.026354] hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
[ 1.026354] allocated pic msi0 type edge pin 0 level 7 to cpu0 slot 16 idt entry 112
[ 1.026354] hdaudio0: interrupting at msi0 vec 0
[ 1.026354] hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
[ 1.026354] hdafg0 at hdaudio0 vendor 0x1002 product 0xAA01 nid 0x01: ATI R6xx HDMI
[ 1.026354] hdafg0: HDMI00 2ch: Digital Out [Jack]
[ 1.026354] nid=03 [pin: Digital Out (Jack)]
[ 1.026354] nid=02 [audio output] [source: dac]
[ 1.026354] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
[ 1.026354] audio0 at hdafg0: playback
[ 1.026354] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.026354] spkr1 at audio0: PC Speaker (synthesized)
[ 1.026354] wsbell at spkr1 not configured
[ 1.026354] pchb0 at pci0 dev 2 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.026354] ppb0 at pci0 dev 2 function 2: AMD 15h/6xh Root Port (rev. 0x00)
[ 1.026354] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.026354] ppb0: link is x1 @ 2.5GT/s
[ 1.026354] pci1 at ppb0 bus 1
[ 1.026354] acpi0: MCFG: 001:00:0: Ok (cfg[0x100]=0x14020001 extconf=Y)
[ 1.026354] acpi0: MCFG: bus 1: valid devices
[ 1.026354] acpi0: MCFG: 001:00:0
[ 1.026354] acpi0: acpimcfg_map_bus done
[ 1.026354] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.026354] re0 at pci1 dev 0 function 0pci_mem_find: void region
[ 1.026354] : RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x15)
[ 1.026354] allocated pic msix1 type edge pin 0 level 6 to cpu0 slot 17 idt entry 99
[ 1.026354] re0: interrupting at msix1 vec 0
[ 1.026354] re0: RTL8168H/8111H (0x5400)
[ 1.026354] re0: Ethernet address 9c:5a:44:79:91:8d
[ 1.026354] re0: using 256 tx descriptors
[ 1.026354] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
[ 1.026354] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[ 1.026354] ppb1 at pci0 dev 2 function 4: AMD 15h/6xh Root Port (rev. 0x00)
[ 1.026354] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.026354] ppb1: link is x1 @ 2.5GT/s
[ 1.026354] pci2 at ppb1 bus 2
[ 1.026354] acpi0: MCFG: 002:00:0: Ok (cfg[0x100]=0x14820001 extconf=Y)
[ 1.026354] acpi0: MCFG: bus 2: valid devices
[ 1.026354] acpi0: MCFG: 002:00:0
[ 1.026354] acpi0: acpimcfg_map_bus done
[ 1.026354] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.026354] Realtek Semiconductor RTL8821CE 802.11ac PCIe NIC (miscellaneous network) at pci2 dev 0 function 0 not configured
[ 1.026354] pchb1 at pci0 dev 3 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.026354] AMD 15h/6xh PSP (miscellaneous crypto) at pci0 dev 8 function 0 not configured
[ 1.026354] pchb2 at pci0 dev 9 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.026354] hdaudio1 at pci0 dev 9 function 2: HD Audio Controller
[ 1.026354] allocated pic ioapic1 type level pin 22 level 7 to cpu0 slot 3 idt entry 113
[ 1.026354] hdaudio1: interrupting at ioapic1 pin 22
[ 1.026354] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.026354] hdafg1 at hdaudio1 vendor 0x10EC product 0x0236 nid 0x01: Realtek product 0236
[ 1.026354] hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[ 1.026354] nid=14 [pin: Speaker (Built-In)]
[ 1.026354] nid=02 [audio output] [source: dac]
[ 1.026354] nid=21 [pin: HP Out (Black Jack)]
[ 1.026354] nid=02 [audio output] [source: dac]
[ 1.026354] hdafg1: ADC01 2ch: Mic In [Built-In]
[ 1.026354] nid=12 [pin: Mic In (Built-In)]
[ 1.026354] hdafg1: ADC02 2ch: Mic In [Jack]
[ 1.026354] nid=19 [pin: Mic In (Black Jack)]
[ 1.026354] hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[ 1.026354] audio1 at hdafg1: playback, capture, full duplex, independent
[ 1.026354] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.026354] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.026354] spkr2 at audio1: PC Speaker (synthesized)
[ 1.026354] wsbell at spkr2 not configured
[ 1.026354] xhci0 at pci0 dev 16 function 0: AMD FCH xHCI (rev. 0x20)
[ 1.026354] xhci0: 64-bit DMA
[ 1.026354] allocated pic msix2 type edge pin 0 level 6 to cpu0 slot 18 idt entry 100
[ 1.026354] xhci0: interrupting at msix2 vec 0
[ 1.026354] xhci0: xHCI version 1.0
[ 1.026354] xhci0: hcs1=8000820 hcs2=44000011 hcs3=0
[ 1.026354] xhci0: hcc=0x14040c3<XECP=0x140,MAXPSA=0x4,NSS,LTC,BNC,AC64>
[ 1.026354] xhci0: xECP 500
[ 1.026354] xhci0: ECR: 0x00010401
[ 1.026354] xhci0: waiting for BIOS to give up control
[ 1.026354] xhci0: ECR: 0x03000402
[ 1.026354] xhci0: SP: 0x03000402 0x20425355 0x00000401 0x00000000
[ 1.026354] xhci0: ss ports 1 - 4
[ 1.026354] xhci0: ECR: 0x02000802
[ 1.026354] xhci0: SP: 0x02000802 0x20425355 0x00180405 0x00000000
[ 1.026354] xhci0: hs ports 5 - 8
[ 1.026354] xhci0: ECR: 0x0000000a
[ 1.026354] xhci0: PAGESIZE 0x00000001
[ 1.026354] xhci0: sc_pgsz 0x00001000
[ 1.026354] xhci0: sc_maxslots 0x00000020
[ 1.026354] xhci0: sc_maxports 8
[ 1.026354] xhci0: sc_maxspbuf 8
[ 1.026354] xhci0: eventst: 0x000000010ed6efc0 0xffffd7020cd33fc0 1000
[ 1.026354] xhci0: dcbaa: 0x000000010ed6f000 0xffffd7020cd34000 1000
[ 1.026354] xhci0: current IMOD 0
[ 1.026354] xhci0: USBCMD 0x00000005
[ 1.026354] usb0 at xhci0: USB revision 3.0
[ 1.026354] usb1 at xhci0: USB revision 2.0
[ 1.026354] ahcisata0 at pci0 dev 17 function 0: AMD FCH SATA AHCI (rev. 0x4b)
[ 1.026354] ahcisata0: 64-bit DMA
[ 1.026354] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf733ff01<PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[ 1.026354] allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 4 idt entry 101
[ 1.026354] ahcisata0: interrupting at ioapic0 pin 19
[ 1.026354] atabus0 at ahcisata0 channel 0
[ 1.026354] atabus1 at ahcisata0 channel 1
[ 1.026354] ehci0 at pci0 dev 18 function 0: AMD FCH EHCI (rev. 0x49)
[ 1.026354] ehci0: 32-bit DMA
[ 1.026354] allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 102
[ 1.026354] ehci0: interrupting at ioapic0 pin 18
[ 1.026354] ehci0: BIOS has given up ownership
[ 1.026354] ehci0: EHCI version 1.0
[ 1.026354] ehci0: Using DMA subregion for control data structures
[ 1.026354] usb2 at ehci0: USB revision 2.0
[ 1.026354] piixpm0 at pci0 dev 20 function 0: AMD X370/X399 SMBus Controller (rev. 0x4b)
[ 1.026354] piixpm0: SMBus @ 0x0b00
[ 1.026354] piixpm0: interrupting at SMI,
[ 1.026354] iic1 at piixpm0 port 0: I2C bus
[ 1.026354] iic2 at piixpm0 port 1: I2C bus
[ 1.026354] pcib0 at pci0 dev 20 function 3: AMD FCH LPC (rev. 0x11)
[ 1.026354] pchb3 at pci0 dev 24 function 0: AMD 15h/7xh HyperTransport Configuration (rev. 0x00)
[ 1.026354] pchb4 at pci0 dev 24 function 1: AMD 15h/7xh Address Map Configuration (rev. 0x00)
[ 1.026354] pchb5 at pci0 dev 24 function 2: AMD 15h/7xh DRAM Configuration (rev. 0x00)
[ 1.026354] pchb6 at pci0 dev 24 function 3: AMD 15h/7xh North Bridge Configuration (rev. 0x00)
[ 1.026354] pchb7 at pci0 dev 24 function 4: AMD 15h/7xh CPU C-state Configuration (rev. 0x00)
[ 1.026354] pchb8 at pci0 dev 24 function 5: AMD 15h/7xh Miscellaneous Configuration (rev. 0x00)
[ 1.026354] isa0 at pcib0
[ 1.026354] acpicpu0 at cpu0: ACPI CPU
[ 1.026354] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.026354] acpicpu0: C2: I/O, lat 400 us, pow 0 mW
[ 1.026354] acpicpu0: P0: FFH, lat 4 us, pow 9460 mW, 2600 MHz
[ 1.026354] acpicpu0: P1: FFH, lat 4 us, pow 7380 mW, 2400 MHz
[ 1.026354] acpicpu0: P2: FFH, lat 4 us, pow 5795 mW, 2200 MHz
[ 1.026354] acpicpu0: P3: FFH, lat 4 us, pow 4500 mW, 1900 MHz
[ 1.026354] acpicpu0: P4: FFH, lat 4 us, pow 3217 mW, 1600 MHz
[ 1.026354] acpicpu0: P5: FFH, lat 4 us, pow 2598 mW, 1300 MHz
[ 1.026354] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.026354] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.026354] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.026354] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.026354] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.026354] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.026354] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.026354] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.026354] acpicpu0: id 0, lapic id 16, cap 0x0000, flags 0x0013ea57
[ 1.026354] acpicpu0: C-state coordination: 2 CPUs, domain 0, type HW_ALL
[ 1.026354] acpicpu0: P-state coordination: 2 CPUs, domain 0, type SW_ALL
[ 1.026354] acpicpu1 at cpu1: ACPI CPU
[ 1.026354] acpicpu1: id 1, lapic id 17, cap 0x0000, flags 0x0013ea57
[ 1.026354] acpicpu1: C-state coordination: 2 CPUs, domain 0, type HW_ALL
[ 1.026354] acpicpu1: P-state coordination: 2 CPUs, domain 0, type SW_ALL
[ 1.026354] SRAT: 0 NUMA nodes
[ 1.026354] Initializing SSP: a74e34936fa19db7 344574855d79f2b0 3a4564c2b40b95b1 5dbcdb03826ad793 a3e4c17a612e430b e5508fe9534232c2 569073d8139f0e3b 900c60828db71506
[ 1.026354] cpu0: TSC freq from HPET 2595137000 Hz
[ 1.026354] cpu0: [re]calibrating local timer
[ 1.026354] cpu0: apic clock running at 99 MHz
[ 1.026354] timecounter: Timecounter "lapic" frequency 99813000 Hz quality -100
[ 1.026354] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.026354] UVM: using package allocation scheme, 1 package(s) per bucket
[ 1.026354] cpu1: TSC skew=82 drift=1
[ 1.026354] cpu1: running
[ 1.026354] timecounter: Timecounter "TSC" frequency 2595137000 Hz quality 3000
[ 1.491208] acpibat0: LENOVO Li-Ion rechargeable battery
[ 1.494667] acpibat0: model number PABAS0241231, serial number 41167
[ 1.494667] acpibat0: granularity: low->warn 0.264 Wh, warn->full 3.780 Wh
[ 1.494667] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.504664] uhub0: 4 ports with 4 removable, self powered
[ 1.504664] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.504664] uhub1: 4 ports with 4 removable, self powered
[ 1.514664] acpiacad0: AC adapter online.
[ 1.514664] acpiacad0: AC adapter connected
[ 1.514664] acpivga0: connected output devices:
[ 1.514664] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.514664] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.514664] acpivga0: 0x0200: TV, head 0
[ 1.514664] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.514664] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.514664] acpivga0: connected output devices:
[ 1.514664] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.514664] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.514664] acpivga0: 0x0200: TV, head 0
[ 1.514664] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.514664] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.514664] acpicpu1: ACPI CPUs started
[ 1.514664] IPsec: Initialized Security Association Processing.
[ 1.524665] aes: Intel AES-NI
[ 1.524665] chacha: x86 SSE2 ChaCha
[ 1.524665] adiantum: self-test passed
[ 1.524665] aes_ccm: self-test passed
[ 1.524665] blake2s: self-test passed
[ 1.524665] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.524665] uhub2: 2 ports with 2 removable, self powered
[ 1.614764] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 1.614764] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 1.644763] wd0 at atabus0 drive 0
[ 1.644763] wd0: <TOSHIBA MQ04ABF100>
[ 1.644763] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 1.644763] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 1.654764] wd0: GPT GUID: 829ca912-c411-4bf9-820e-b9ecad0d2553
[ 1.654764] dk0 at wd0: "bed6b46c-83bc-4e7f-86ef-dc4aa73b187a", 614400 blocks at 4096, type: msdos
[ 1.654764] dk1 at wd0: "80818f9f-4d94-4ffa-b29a-74c30754a155", 1258291200 blocks at 618496, type: ext2fs
[ 1.654764] dk2 at wd0: "be1e5856-4e07-2044-bf2a-0efd58efdba0", 694615439 blocks at 1258909696, type: ffs
[ 1.664670] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
[ 1.674667] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
[ 1.674667] atapibus0 at atabus1: 1 targets
[ 1.674667] cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GUE0N, KVNJ7GE0413, T.02> cdrom removable
[ 1.684763] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[ 1.684763] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
[ 1.944763] uhub3 at uhub0 port 2: Microchip Tech (0x0424) USB5744 (0x5744), class 9/0, rev 3.10/2.86, addr 1
[ 1.944763] uhub3: 2 ports with 2 removable, self powered
[ 1.944763] uhub3: setting hub depth 0
[ 2.004763] uhub4 at uhub1 port 2: Microchip Tech (0x0424) USB2744 (0x2744), class 9/0, rev 2.10/2.86, addr 2
[ 2.004763] uhub4: multiple transaction translators
[ 2.004763] uhub4: 4 ports with 4 removable, self powered
[ 2.524765] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 2.524765] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.524765] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.524765] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.574764] uhub5 at uhub2 port 1: vendor 0438 (0x0438) product 7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
[ 2.574764] uhub5: single transaction translator
[ 2.574764] uhub5: 4 ports with 4 removable, self powered
[ 2.764763] uhidev0 at uhub4 port 3 configuration 1 interface 0
[ 2.764763] uhidev0: SIGMACHIP (0x1c4f) USB Keyboard (0x0002), rev 1.10/1.50, addr 3, iclass 3/1
[ 2.764763] ukbd0 at uhidev0
[ 2.764763] wskbd1 at ukbd0 mux 1
[ 2.764763] wskbd1: connecting to wsdisplay0
[ 2.764763] uhidev1 at uhub4 port 3 configuration 1 interface 1
[ 2.764763] uhidev1: SIGMACHIP (0x1c4f) USB Keyboard (0x0002), rev 1.10/1.50, addr 3, iclass 3/0
[ 2.774711] uhidev1: 2 report ids
[ 2.774711] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
[ 2.774711] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
[ 3.194665] uhidev2 at uhub4 port 4 configuration 1 interface 0
[ 3.194665] uhidev2: PixArt (0x17ef) Lenovo USB Optical Mouse (0x608d), rev 2.00/1.00, addr 4, iclass 3/1
[ 3.194665] ums0 at uhidev2: 3 buttons and Z dir
[ 3.194665] wsmouse0 at ums0 mux 0
[ 3.304762] ubt0 at uhub5 port 2
[ 3.304762] ubt0: Realtek (0x0bda) Bluetooth Radio (0xc024), rev 1.10/1.10, addr 3
[ 3.524763] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 3.524763] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.524763] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.524763] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.814761] uvideo0 at uhub5 port 3 configuration 1 interface 0: Sonix Technology Co., Ltd. (0x174f) EasyCamera (0x241a), rev 2.00/0.13, addr 4
[ 3.814761] video0 at uvideo0pool redzone disabled for 'video'
[ 3.814761] : Sonix Technology Co., Ltd. (0x174f) EasyCamera (0x241a), rev 2.00/0.13, addr 4
[ 3.814761] crypto: assign driver 0, flags 2
[ 3.814761] crypto: driver 0 registers alg 1 flags 0 maxoplen 0
[ 3.814761] crypto: driver 0 registers alg 2 flags 0 maxoplen 0
[ 3.814761] crypto: driver 0 registers alg 3 flags 0 maxoplen 0
[ 3.814761] crypto: driver 0 registers alg 4 flags 0 maxoplen 0
[ 3.814761] crypto: driver 0 registers alg 5 flags 0 maxoplen 0
[ 3.814761] crypto: driver 0 registers alg 26 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 27 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 29 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 33 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 17 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 6 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 19 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 7 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 20 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 15 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 24 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 25 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 8 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 21 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 16 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 9 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 10 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 13 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 14 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 28 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 30 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 31 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 32 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 11 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 18 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 23 flags 0 maxoplen 0
[ 3.824675] crypto: driver 0 registers alg 22 flags 0 maxoplen 0
[ 3.824675] cgd: self-test aes-xts-256
[ 3.824675] cgd: self-test aes-xts-512
[ 3.824675] cgd: self-test aes-cbc-128
[ 3.824675] cgd: self-test aes-cbc-256
[ 3.824675] cgd: self-test 3des-cbc-192
[ 3.824675] cgd: self-test blowfish-cbc-448
[ 3.824675] cgd: self-test aes-cbc-128 (encblkno8)
[ 3.824675] cgd: self-tests passed
[ 3.824675] swwdog0: software watchdog initialized
[ 3.924762] Searching for RAID components...
[ 3.934667] WARNING: 1 error while detecting hardware; check system log.
[ 3.934667] boot device: wd0
[ 3.934667] root on dk2
[ 3.974764] root file system type: ffs
[ 3.984763] kern.module.path=/stand/amd64/10.0/modules
[ 6.634758] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 6.634758] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 6.634758] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 6.634758] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 11.224755] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 11.224755] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 11.224755] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 11.224755] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 11.634658] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 11.634658] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 11.644658] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 11.644658] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 18.844777] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 18.844777] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 18.844777] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 18.844777] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 24.945001] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 24.945001] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 24.945001] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 24.945001] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 34.105190] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 34.105190] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 34.105190] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 34.105190] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
Xorg.log on NetBSD
-----[ 36.289]
X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
[ 36.289] Current Operating System: NetBSD lenovon 10.0_BETA NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 19 14:00:35 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[ 36.289]
[ 36.289] Current version of pixman: 0.42.2
[ 36.289] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 36.289] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.290] (==) Log file: "/usr/pkg/var/log/Xorg.0.log", Time: Thu Dec 29 10:10:47 2022
[ 36.466] (==) Using system config directory "/usr/pkg/share/X11/xorg.conf.d"
[ 36.467] (==) No Layout section. Using the first Screen section.
[ 36.467] (==) No screen section available. Using defaults.
[ 36.467] (**) |-->Screen "Default Screen Section" (0)
[ 36.467] (**) | |-->Monitor "<default monitor>"
[ 36.467] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 36.467] (==) Not automatically adding devices
[ 36.467] (==) Not automatically enabling devices
[ 36.467] (==) Not automatically adding GPU devices
[ 36.467] (==) Automatically binding GPU devices
[ 36.477] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 36.626] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not exist.
[ 36.626] Entry deleted from font path.
[ 36.801] (WW) `fonts.dir' not found (or not valid) in "/usr/pkg/share/fonts/X11/cyrillic".
[ 36.801] Entry deleted from font path.
[ 36.801] (Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (==) FontPath set to:
/usr/pkg/share/fonts/X11/misc,
/usr/pkg/share/fonts/X11/TTF,
/usr/pkg/share/fonts/X11/Type1,
/usr/pkg/share/fonts/X11/100dpi,
/usr/pkg/share/fonts/X11/75dpi
[ 36.801] (==) ModulePath set to "/usr/pkg/lib/xorg/modules"
[ 36.801] (==) |-->Input Device "<default pointer>"
[ 36.801] (==) |-->Input Device "<default keyboard>"
[ 36.801] (==) No Layout section. Using the default mouse configuration.
[ 36.801] (==) No Layout section. Using the default keyboard configuration.
[ 36.801] (II) Loader magic: 0x8362dc40
[ 36.801] (II) Module ABI versions:
[ 36.801] X.Org ANSI C Emulation: 0.4
[ 36.801] X.Org Video Driver: 25.2
[ 36.801] X.Org XInput driver : 24.4
[ 36.801] X.Org Server Extension : 10.0
[ 36.805] (--) PCI:*(0@0:1:0) 1002:98e4:17aa:39f5 rev 234, Mem @ 0xe0000000/268435456, 0xf0800000/8388608, 0xf0400000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 36.805] (II) LoadModule: "glx"
[ 36.817] (II) Loading /usr/pkg/lib/xorg/modules/extensions/libglx.so
[ 37.008] (II) Module glx: vendor="X.Org Foundation"
[ 37.008] compiled for 1.21.1.6, module version = 1.0.0
[ 37.008] ABI class: X.Org Server Extension, version 10.0
[ 37.008] (==) Matched ati as autoconfigured driver 0
[ 37.008] (==) Matched fbdev as autoconfigured driver 1
[ 37.008] (==) Matched modesetting as autoconfigured driver 2
[ 37.008] (==) Matched vesa as autoconfigured driver 3
[ 37.008] (==) Matched wsfb as autoconfigured driver 4
[ 37.008] (==) Assigned the driver to the xf86ConfigLayout
[ 37.008] (II) LoadModule: "ati"
[ 37.009] (WW) Warning, couldn't open module ati
[ 37.009] (EE) Failed to load module "ati" (module does not exist, 0)
[ 37.009] (II) LoadModule: "fbdev"
[ 37.009] (WW) Warning, couldn't open module fbdev
[ 37.009] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 37.009] (II) LoadModule: "modesetting"
[ 37.009] (II) Loading /usr/pkg/lib/xorg/modules/drivers/modesetting_drv.so
[ 37.010] (II) Module modesetting: vendor="X.Org Foundation"
[ 37.010] compiled for 1.21.1.6, module version = 1.21.1
[ 37.010] Module class: X.Org Video Driver
[ 37.010] ABI class: X.Org Video Driver, version 25.2
[ 37.011] (II) LoadModule: "vesa"
[ 37.011] (II) Loading /usr/pkg/lib/xorg/modules/drivers/vesa_drv.so
[ 37.025] (II) Module vesa: vendor="X.Org Foundation"
[ 37.025] compiled for 1.21.1.4, module version = 2.5.0
[ 37.025] Module class: X.Org Video Driver
[ 37.025] ABI class: X.Org Video Driver, version 25.2
[ 37.025] (II) LoadModule: "wsfb"
[ 37.025] (II) Loading /usr/pkg/lib/xorg/modules/drivers/wsfb_drv.so
[ 37.027] (II) Module wsfb: vendor="X.Org Foundation"
[ 37.027] compiled for 1.21.1.4, module version = 0.4.0
[ 37.027] ABI class: X.Org Video Driver, version 25.2
[ 37.027] (II) LoadModule: "mouse"
[ 37.027] (II) Loading /usr/pkg/lib/xorg/modules/input/mouse_drv.so
[ 37.029] (II) Module mouse: vendor="X.Org Foundation"
[ 37.029] compiled for 1.21.1.4, module version = 1.9.4
[ 37.029] Module class: X.Org XInput Driver
[ 37.029] ABI class: X.Org XInput driver, version 24.4
[ 37.029] (II) LoadModule: "kbd"
[ 37.029] (II) Loading /usr/pkg/lib/xorg/modules/input/kbd_drv.so
[ 37.030] (II) Module kbd: vendor="X.Org Foundation"
[ 37.030] compiled for 1.21.1.4, module version = 2.0.0
[ 37.030] Module class: X.Org XInput Driver
[ 37.030] ABI class: X.Org XInput driver, version 24.4
[ 37.030] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 37.030] (II) VESA: driver for VESA chipsets: vesa
[ 37.030] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[ 37.030] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 37.036] (EE) open /dev/dri/card0: Operation not supported by device
[ 37.037] (WW) Falling back to old probe method for modesetting
[ 37.037] (EE) open /dev/dri/card0: Operation not supported by device
[ 37.037] vesa: Ignoring device with a bound kernel driver
[ 37.037] (WW) Falling back to old probe method for wsfb
[ 37.037] (II) wsfb(2): using default device
[ 37.037] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 37.037] (EE) Screen 0 deleted because of no matching config section.
[ 37.037] (II) UnloadModule: "modesetting"
[ 37.037] (EE) Screen 0 deleted because of no matching config section.
[ 37.037] (II) UnloadModule: "vesa"
[ 37.037] (II) wsfb(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 37.037] (==) wsfb(0): Depth 24, (==) framebuffer bpp 32
[ 37.037] (II) masks generated: 00ff0000 0000ff00 000000ff
[ 37.037] (==) wsfb(0): RGB weight 888
[ 37.037] (==) wsfb(0): Default visual is TrueColor
[ 37.037] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0)
[ 37.037] (II) wsfb(0): Vidmem: 3072k
[ 37.037] (II) fbi_flags: 0
[ 37.037] (==) wsfb(0): DPI set to (96, 96)
[ 37.037] (**) wsfb(0): Using "Shadow Framebuffer"
[ 37.037] (II) Loading sub module "shadow"
[ 37.037] (II) LoadModule: "shadow"
[ 37.037] (II) Loading /usr/pkg/lib/xorg/modules/libshadow.so
[ 37.052] (II) Module shadow: vendor="X.Org Foundation"
[ 37.052] compiled for 1.21.1.6, module version = 1.1.0
[ 37.052] ABI class: X.Org ANSI C Emulation, version 0.4
[ 37.052] (II) Loading sub module "fb"
[ 37.052] (II) LoadModule: "fb"
[ 37.052] (II) Module "fb" already built-in
[ 37.063] (==) wsfb(0): Backing store enabled
[ 37.074] (II) Initializing extension Generic Event Extension
[ 37.074] (II) Initializing extension SHAPE
[ 37.074] (II) Initializing extension MIT-SHM
[ 37.074] (II) Initializing extension XInputExtension
[ 37.075] (II) Initializing extension XTEST
[ 37.075] (II) Initializing extension BIG-REQUESTS
[ 37.075] (II) Initializing extension SYNC
[ 37.075] (II) Initializing extension XKEYBOARD
[ 37.076] (II) Initializing extension XC-MISC
[ 37.076] (II) Initializing extension XFIXES
[ 37.076] (II) Initializing extension RENDER
[ 37.077] (II) Initializing extension RANDR
[ 37.077] (II) Initializing extension COMPOSITE
[ 37.077] (II) Initializing extension DAMAGE
[ 37.077] (II) Initializing extension MIT-SCREEN-SAVER
[ 37.077] (II) Initializing extension DOUBLE-BUFFER
[ 37.077] (II) Initializing extension RECORD
[ 37.077] (II) Initializing extension DPMS
[ 37.077] (II) Initializing extension Present
[ 37.077] (II) Initializing extension DRI3
[ 37.078] (II) Initializing extension X-Resource
[ 37.078] (II) Initializing extension XVideo
[ 37.078] (II) Initializing extension XVideo-MotionCompensation
[ 37.078] (II) Initializing extension GLX
[ 37.078] (II) AIGLX: Screen 0 is not DRI2 capable
[ 37.386] (II) IGLX: Loaded and initialized swrast
[ 37.386] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 37.386] (II) Initializing extension XFree86-VidModeExtension
[ 37.386] (II) Initializing extension XFree86-DGA
[ 37.386] (II) Initializing extension XFree86-DRI
[ 37.386] (II) Initializing extension DRI2
[ 37.780] (II) Using input driver 'mouse' for '<default pointer>'
[ 37.780] (**) Option "CorePointer" "on"
[ 37.780] (**) <default pointer>: always reports core events
[ 37.780] (WW) <default pointer>: No Device specified, looking for one...
[ 37.784] (II) <default pointer>: found Device "/dev/wsmouse"
[ 37.787] (--) <default pointer>: Device: "/dev/wsmouse"
[ 37.787] (==) <default pointer>: Protocol: "WSMouse"
[ 37.787] (**) <default pointer>: always reports core events
[ 37.787] (**) Option "Device" "/dev/wsmouse"
[ 37.793] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 37.793] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 37.793] (**) <default pointer>: Buttons: 9
[ 37.793] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 37.793] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 37.793] (**) <default pointer>: (accel) acceleration profile 0
[ 37.793] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 37.793] (**) <default pointer>: (accel) acceleration threshold: 4
[ 37.796] (II) Using input driver 'kbd' for '<default keyboard>'
[ 37.796] (**) Option "CoreKeyboard" "on"
[ 37.796] (**) <default keyboard>: always reports core events
[ 37.797] (**) <default keyboard>: always reports core events
[ 37.797] (**) Option "Protocol" "standard"
[ 37.797] (**) Option "XkbRules" "base"
[ 37.797] (**) Option "XkbModel" "pc105"
[ 37.797] (**) Option "XkbLayout" "us"
[ 37.797] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD, id 7)
-------------
[ 36.289]
X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
[ 36.289] Current Operating System: NetBSD lenovon 10.0_BETA NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 19 14:00:35 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[ 36.289]
[ 36.289] Current version of pixman: 0.42.2
[ 36.289] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 36.289] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.290] (==) Log file: "/usr/pkg/var/log/Xorg.0.log", Time: Thu Dec 29 10:10:47 2022
[ 36.466] (==) Using system config directory "/usr/pkg/share/X11/xorg.conf.d"
[ 36.467] (==) No Layout section. Using the first Screen section.
[ 36.467] (==) No screen section available. Using defaults.
[ 36.467] (**) |-->Screen "Default Screen Section" (0)
[ 36.467] (**) | |-->Monitor "<default monitor>"
[ 36.467] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 36.467] (==) Not automatically adding devices
[ 36.467] (==) Not automatically enabling devices
[ 36.467] (==) Not automatically adding GPU devices
[ 36.467] (==) Automatically binding GPU devices
[ 36.477] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 36.626] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not exist.
[ 36.626] Entry deleted from font path.
[ 36.801] (WW) `fonts.dir' not found (or not valid) in "/usr/pkg/share/fonts/X11/cyrillic".
[ 36.801] Entry deleted from font path.
[ 36.801] (Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does not exist.
[ 36.801] Entry deleted from font path.
[ 36.801] (==) FontPath set to:
/usr/pkg/share/fonts/X11/misc,
/usr/pkg/share/fonts/X11/TTF,
/usr/pkg/share/fonts/X11/Type1,
/usr/pkg/share/fonts/X11/100dpi,
/usr/pkg/share/fonts/X11/75dpi
[ 36.801] (==) ModulePath set to "/usr/pkg/lib/xorg/modules"
[ 36.801] (==) |-->Input Device "<default pointer>"
[ 36.801] (==) |-->Input Device "<default keyboard>"
[ 36.801] (==) No Layout section. Using the default mouse configuration.
[ 36.801] (==) No Layout section. Using the default keyboard configuration.
[ 36.801] (II) Loader magic: 0x8362dc40
[ 36.801] (II) Module ABI versions:
[ 36.801] X.Org ANSI C Emulation: 0.4
[ 36.801] X.Org Video Driver: 25.2
[ 36.801] X.Org XInput driver : 24.4
[ 36.801] X.Org Server Extension : 10.0
[ 36.805] (--) PCI:*(0@0:1:0) 1002:98e4:17aa:39f5 rev 234, Mem @ 0xe0000000/268435456, 0xf0800000/8388608, 0xf0400000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 36.805] (II) LoadModule: "glx"
[ 36.817] (II) Loading /usr/pkg/lib/xorg/modules/extensions/libglx.so
[ 37.008] (II) Module glx: vendor="X.Org Foundation"
[ 37.008] compiled for 1.21.1.6, module version = 1.0.0
[ 37.008] ABI class: X.Org Server Extension, version 10.0
[ 37.008] (==) Matched ati as autoconfigured driver 0
[ 37.008] (==) Matched fbdev as autoconfigured driver 1
[ 37.008] (==) Matched modesetting as autoconfigured driver 2
[ 37.008] (==) Matched vesa as autoconfigured driver 3
[ 37.008] (==) Matched wsfb as autoconfigured driver 4
[ 37.008] (==) Assigned the driver to the xf86ConfigLayout
[ 37.008] (II) LoadModule: "ati"
[ 37.009] (WW) Warning, couldn't open module ati
[ 37.009] (EE) Failed to load module "ati" (module does not exist, 0)
[ 37.009] (II) LoadModule: "fbdev"
[ 37.009] (WW) Warning, couldn't open module fbdev
[ 37.009] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 37.009] (II) LoadModule: "modesetting"
[ 37.009] (II) Loading /usr/pkg/lib/xorg/modules/drivers/modesetting_drv.so
[ 37.010] (II) Module modesetting: vendor="X.Org Foundation"
[ 37.010] compiled for 1.21.1.6, module version = 1.21.1
[ 37.010] Module class: X.Org Video Driver
[ 37.010] ABI class: X.Org Video Driver, version 25.2
[ 37.011] (II) LoadModule: "vesa"
[ 37.011] (II) Loading /usr/pkg/lib/xorg/modules/drivers/vesa_drv.so
[ 37.025] (II) Module vesa: vendor="X.Org Foundation"
[ 37.025] compiled for 1.21.1.4, module version = 2.5.0
[ 37.025] Module class: X.Org Video Driver
[ 37.025] ABI class: X.Org Video Driver, version 25.2
[ 37.025] (II) LoadModule: "wsfb"
[ 37.025] (II) Loading /usr/pkg/lib/xorg/modules/drivers/wsfb_drv.so
[ 37.027] (II) Module wsfb: vendor="X.Org Foundation"
[ 37.027] compiled for 1.21.1.4, module version = 0.4.0
[ 37.027] ABI class: X.Org Video Driver, version 25.2
[ 37.027] (II) LoadModule: "mouse"
[ 37.027] (II) Loading /usr/pkg/lib/xorg/modules/input/mouse_drv.so
[ 37.029] (II) Module mouse: vendor="X.Org Foundation"
[ 37.029] compiled for 1.21.1.4, module version = 1.9.4
[ 37.029] Module class: X.Org XInput Driver
[ 37.029] ABI class: X.Org XInput driver, version 24.4
[ 37.029] (II) LoadModule: "kbd"
[ 37.029] (II) Loading /usr/pkg/lib/xorg/modules/input/kbd_drv.so
[ 37.030] (II) Module kbd: vendor="X.Org Foundation"
[ 37.030] compiled for 1.21.1.4, module version = 2.0.0
[ 37.030] Module class: X.Org XInput Driver
[ 37.030] ABI class: X.Org XInput driver, version 24.4
[ 37.030] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 37.030] (II) VESA: driver for VESA chipsets: vesa
[ 37.030] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[ 37.030] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 37.036] (EE) open /dev/dri/card0: Operation not supported by device
[ 37.037] (WW) Falling back to old probe method for modesetting
[ 37.037] (EE) open /dev/dri/card0: Operation not supported by device
[ 37.037] vesa: Ignoring device with a bound kernel driver
[ 37.037] (WW) Falling back to old probe method for wsfb
[ 37.037] (II) wsfb(2): using default device
[ 37.037] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 37.037] (EE) Screen 0 deleted because of no matching config section.
[ 37.037] (II) UnloadModule: "modesetting"
[ 37.037] (EE) Screen 0 deleted because of no matching config section.
[ 37.037] (II) UnloadModule: "vesa"
[ 37.037] (II) wsfb(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 37.037] (==) wsfb(0): Depth 24, (==) framebuffer bpp 32
[ 37.037] (II) masks generated: 00ff0000 0000ff00 000000ff
[ 37.037] (==) wsfb(0): RGB weight 888
[ 37.037] (==) wsfb(0): Default visual is TrueColor
[ 37.037] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0)
[ 37.037] (II) wsfb(0): Vidmem: 3072k
[ 37.037] (II) fbi_flags: 0
[ 37.037] (==) wsfb(0): DPI set to (96, 96)
[ 37.037] (**) wsfb(0): Using "Shadow Framebuffer"
[ 37.037] (II) Loading sub module "shadow"
[ 37.037] (II) LoadModule: "shadow"
[ 37.037] (II) Loading /usr/pkg/lib/xorg/modules/libshadow.so
[ 37.052] (II) Module shadow: vendor="X.Org Foundation"
[ 37.052] compiled for 1.21.1.6, module version = 1.1.0
[ 37.052] ABI class: X.Org ANSI C Emulation, version 0.4
[ 37.052] (II) Loading sub module "fb"
[ 37.052] (II) LoadModule: "fb"
[ 37.052] (II) Module "fb" already built-in
[ 37.063] (==) wsfb(0): Backing store enabled
[ 37.074] (II) Initializing extension Generic Event Extension
[ 37.074] (II) Initializing extension SHAPE
[ 37.074] (II) Initializing extension MIT-SHM
[ 37.074] (II) Initializing extension XInputExtension
[ 37.075] (II) Initializing extension XTEST
[ 37.075] (II) Initializing extension BIG-REQUESTS
[ 37.075] (II) Initializing extension SYNC
[ 37.075] (II) Initializing extension XKEYBOARD
[ 37.076] (II) Initializing extension XC-MISC
[ 37.076] (II) Initializing extension XFIXES
[ 37.076] (II) Initializing extension RENDER
[ 37.077] (II) Initializing extension RANDR
[ 37.077] (II) Initializing extension COMPOSITE
[ 37.077] (II) Initializing extension DAMAGE
[ 37.077] (II) Initializing extension MIT-SCREEN-SAVER
[ 37.077] (II) Initializing extension DOUBLE-BUFFER
[ 37.077] (II) Initializing extension RECORD
[ 37.077] (II) Initializing extension DPMS
[ 37.077] (II) Initializing extension Present
[ 37.077] (II) Initializing extension DRI3
[ 37.078] (II) Initializing extension X-Resource
[ 37.078] (II) Initializing extension XVideo
[ 37.078] (II) Initializing extension XVideo-MotionCompensation
[ 37.078] (II) Initializing extension GLX
[ 37.078] (II) AIGLX: Screen 0 is not DRI2 capable
[ 37.386] (II) IGLX: Loaded and initialized swrast
[ 37.386] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 37.386] (II) Initializing extension XFree86-VidModeExtension
[ 37.386] (II) Initializing extension XFree86-DGA
[ 37.386] (II) Initializing extension XFree86-DRI
[ 37.386] (II) Initializing extension DRI2
[ 37.780] (II) Using input driver 'mouse' for '<default pointer>'
[ 37.780] (**) Option "CorePointer" "on"
[ 37.780] (**) <default pointer>: always reports core events
[ 37.780] (WW) <default pointer>: No Device specified, looking for one...
[ 37.784] (II) <default pointer>: found Device "/dev/wsmouse"
[ 37.787] (--) <default pointer>: Device: "/dev/wsmouse"
[ 37.787] (==) <default pointer>: Protocol: "WSMouse"
[ 37.787] (**) <default pointer>: always reports core events
[ 37.787] (**) Option "Device" "/dev/wsmouse"
[ 37.793] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 37.793] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 37.793] (**) <default pointer>: Buttons: 9
[ 37.793] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 37.793] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 37.793] (**) <default pointer>: (accel) acceleration profile 0
[ 37.793] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 37.793] (**) <default pointer>: (accel) acceleration threshold: 4
[ 37.796] (II) Using input driver 'kbd' for '<default keyboard>'
[ 37.796] (**) Option "CoreKeyboard" "on"
[ 37.796] (**) <default keyboard>: always reports core events
[ 37.797] (**) <default keyboard>: always reports core events
[ 37.797] (**) Option "Protocol" "standard"
[ 37.797] (**) Option "XkbRules" "base"
[ 37.797] (**) Option "XkbModel" "pc105"
[ 37.797] (**) Option "XkbLayout" "us"
[ 37.797] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD, id 7)
dmesg on Ubuntu
---------------
[ 0.701869] efifb: probing for efifb
[ 0.701892] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.701895] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.701897] efifb: scrolling: redraw
[ 0.701900] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.702002] Console: switching to colour frame buffer device 128x48
[ 0.703569] fb0: EFI VGA frame buffer device
[ 0.703957] ACPI: AC Adapter [ACAD] (on-line)
[ 0.704034] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C0D:00/input/input0
[ 0.704085] ACPI: Lid Switch [LID0]
[ 0.704109] ACPI: More than one Lid device found!
[ 0.704129] button: probe of PNP0C0D:01 failed with error -17
[ 0.704176] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.704243] ACPI: Power Button [PWRB]
[ 0.704289] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.704338] ACPI: Power Button [PWRF]
[ 0.704828] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.705712] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 0.706814] Linux agpgart interface v0.103
[ 0.707021] tpm_crb MSFT0101:00: can't request region for resource [mem 0xdfbb6000-0xdfbb9fff]
[ 0.707054] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 0.811476] loop: module loaded
[ 0.811808] tun: Universal TUN/TAP device driver, 1.6
[ 0.811866] PPP generic driver version 2.4.2
[ 0.811944] VFIO - User Level meta-driver version: 0.3
[ 0.812048] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.812073] ehci-pci: EHCI PCI platform driver
[ 0.812286] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 0.812311] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.813089] ehci-pci 0000:00:12.0: debug port 2
[ 0.813879] ehci-pci 0000:00:12.0: irq 18, io mem 0xf046d000
[ 0.827434] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 0.828264] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.829016] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.829769] usb usb1: Product: EHCI Host Controller
[ 0.830515] usb usb1: Manufacturer: Linux 5.4.0-135-generic ehci_hcd
[ 0.831272] usb usb1: SerialNumber: 0000:00:12.0
[ 0.832167] hub 1-0:1.0: USB hub found
[ 0.832909] hub 1-0:1.0: 2 ports detected
[ 0.833881] ehci-platform: EHCI generic platform driver
[ 0.834661] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.835424] ohci-pci: OHCI PCI platform driver
[ 0.836196] ohci-platform: OHCI generic platform driver
[ 0.836964] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.837881] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.838640] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.944447] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 0.945497] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.946256] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 0.947028] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 0.951390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.952185] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952953] usb usb2: Product: xHCI Host Controller
[ 0.953715] usb usb2: Manufacturer: Linux 5.4.0-135-generic xhci-hcd
[ 0.954477] usb usb2: SerialNumber: 0000:00:10.0
[ 0.955352] hub 2-0:1.0: USB hub found
[ 0.956107] hub 2-0:1.0: 4 ports detected
[ 0.957257] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.958031] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.958790] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.959546] usb usb3: Product: xHCI Host Controller
[ 0.960280] usb usb3: Manufacturer: Linux 5.4.0-135-generic xhci-hcd
[ 0.961014] usb usb3: SerialNumber: 0000:00:10.0
[ 0.961825] hub 3-0:1.0: USB hub found
[ 0.962551] hub 3-0:1.0: 4 ports detected
[ 0.963820] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[ 0.964539] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.965675] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.966495] mousedev: PS/2 mouse device common for all mice
[ 0.967374] rtc_cmos 00:01: RTC can wake from S4
[ 0.968232] rtc_cmos 00:01: registered as rtc0
[ 0.968968] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.969707] i2c /dev entries driver
[ 0.970508] device-mapper: uevent: version 1.0.3
[ 0.971307] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.972063] platform eisa.0: Probing EISA bus 0
[ 0.972804] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.973544] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.974294] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.975034] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.975761] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.976466] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.977171] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.977849] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.978550] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.979222] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.979954] platform eisa.0: EISA: Detected 0 cards
[ 0.980668] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.981365] EFI Variables Facility v0.08 2004-May-17
[ 0.999555] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[ 1.000304] drop_monitor: Initializing network drop monitor service
[ 1.001209] NET: Registered protocol family 10
[ 1.009450] Segment Routing with IPv6
[ 1.010201] NET: Registered protocol family 17
[ 1.010944] Key type dns_resolver registered
[ 1.011853] RAS: Correctable Errors collector initialized.
[ 1.012585] microcode: CPU0: patch_level=0x06006705
[ 1.013279] microcode: CPU1: patch_level=0x06006705
[ 1.014211] microcode: Microcode Update Driver: v2.2.
[ 1.014218] IPI shorthand broadcast: enabled
[ 1.015570] sched_clock: Marking stable (1014955172, 587504)->(1021175239, -5632563)
[ 1.016323] registered taskstats version 1
[ 1.017007] Loading compiled-in X.509 certificates
[ 1.018567] Loaded X.509 cert 'Build time autogenerated kernel key: 301fa1635160c4bced76d199e96a79d009e4edcf'
[ 1.020078] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.021546] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.022255] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.022989] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.023754] zswap: loaded using pool lzo/zbud
[ 1.024553] Key type ._fscrypt registered
[ 1.025275] Key type .fscrypt registered
[ 1.033209] Key type big_key registered
[ 1.037456] Key type encrypted registered
[ 1.038186] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.040668] integrity: Loading X.509 certificate: UEFI:db
[ 1.041419] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.042135] integrity: Loading X.509 certificate: UEFI:db
[ 1.042882] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.043636] integrity: Loading X.509 certificate: UEFI:db
[ 1.044391] integrity: Loaded X.509 cert '8Z130-15AST: 334e8c773d74d1a6483ed6caab36ade7'
[ 1.047755] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 1.048890] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.050406] ima: No TPM chip found, activating TPM-bypass!
[ 1.051183] ima: Allocated hash algorithm: sha1
[ 1.051975] ima: No architecture policies found
[ 1.052763] evm: Initialising EVM extended attributes:
[ 1.053545] evm: security.selinux
[ 1.054330] evm: security.SMACK64
[ 1.055121] evm: security.SMACK64EXEC
[ 1.055915] evm: security.SMACK64TRANSMUTE
[ 1.056707] evm: security.SMACK64MMAP
[ 1.057479] evm: security.apparmor
[ 1.058233] evm: security.ima
[ 1.058980] evm: security.capability
[ 1.059718] evm: HMAC attrs: 0x1
[ 1.060858] PM: Magic number: 2:491:107
[ 1.061700] rtc_cmos 00:01: setting system clock to 2022-12-29T02:07:25 UTC (1672279645)
[ 1.062610] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.065057] Freeing unused decrypted memory: 2040K
[ 1.066659] Freeing unused kernel image memory: 2756K
[ 1.083373] Write protecting the kernel read-only data: 26624k
[ 1.084900] Freeing unused kernel image memory: 2036K
[ 1.085896] Freeing unused kernel image memory: 744K
[ 1.097438] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.098259] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.099035] Run /init as init process
[ 1.187557] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.196130] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.197516] acpi device:00: registered as cooling_device2
[ 1.198775] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.201354] i2c_hid i2c-ELAN0621:00: i2c-ELAN0621:00 supply vdd not found, using dummy regulator
[ 1.202302] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[ 1.203926] i2c_hid i2c-ELAN0621:00: i2c-ELAN0621:00 supply vddl not found, using dummy regulator
[ 1.226966] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.227934] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 1.230103] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.235461] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.238679] ahci 0000:00:11.0: version 3.0
[ 1.238914] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.239927] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 1.243219] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 1.244239] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.245997] hub 1-1:1.0: USB hub found
[ 1.247216] hub 1-1:1.0: 4 ports detected
[ 1.252496] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 9c:5a:44:79:91:8d, XID 541, IRQ 32
[ 1.253482] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.254525] scsi host0: ahci
[ 1.255717] scsi host1: ahci
[ 1.256667] ata1: SATA max UDMA/133 abar m1024@0xf046c000 port 0xf046c100 irq 19
[ 1.257620] ata2: SATA max UDMA/133 abar m1024@0xf046c000 port 0xf046c180 irq 19
[ 1.264501] cryptd: max_cpu_qlen set to 1000
[ 1.285972] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 1.349860] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 1.350627]
Initialized Local Variables for Method [APCL]:
[ 1.352127] Local0: 0000000049375afe <Obj> Integer 0000000000000000
[ 1.352728] usb 2-2: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.86
[ 1.352936] No Arguments are initialized for method [APCL]
[ 1.353850] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.353852] usb 2-2: Product: USB2744
[ 1.353853] usb 2-2: Manufacturer: Microchip Tech
[ 1.355387] hub 2-2:1.0: USB hub found
[ 1.355582] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.356851] hub 2-2:1.0: 4 ports detected
[ 1.357440] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.360989] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.478064] usb 3-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.501477] usb 3-2: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.86
[ 1.502393] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 1.503285] usb 3-2: Product: USB5744
[ 1.504162] usb 3-2: Manufacturer: Microchip Tech
[ 1.506809] hub 3-2:1.0: USB hub found
[ 1.508303] hub 3-2:1.0: 2 ports detected
[ 1.545721] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 1.649795] usb 2-2.3: new low-speed USB device number 3 using xhci_hcd
[ 1.654881] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=c024, bcdDevice= 1.10
[ 1.655781] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.656659] usb 1-1.2: Product: Bluetooth Radio
[ 1.657522] usb 1-1.2: Manufacturer: Realtek
[ 1.658374] usb 1-1.2: SerialNumber: 00e04c000001
[ 1.693731] tsc: Refined TSC clocksource calibration: 2595.129 MHz
[ 1.694647] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256842be5ab, max_idle_ns: 440795280806 ns
[ 1.695510] clocksource: Switched to clocksource tsc
[ 1.733795] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.734972] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.737727] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 1.737729] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33
[ 1.739433] ata1.00: ATA-10: TOSHIBA MQ04ABF100, JU0A0E, max UDMA/100
[ 1.740537] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.744477] ata2.00: configured for UDMA/33
[ 1.746320] ata1.00: configured for UDMA/100
[ 1.758409] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ04ABF1 0E PQ: 0 ANSI: 5
[ 1.759264] usb 2-2.3: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.50
[ 1.759451] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.760224] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.761336] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.762163] usb 2-2.3: Product: USB Keyboard
[ 1.763120] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.764093] usb 2-2.3: Manufacturer: SIGMACHIP
[ 1.765088] sd 0:0:0:0: [sda] Write Protect is off
[ 1.766183] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5
[ 1.766988] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.767008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.788496] usbcore: registered new interface driver usbhid
[ 1.789408] usbhid: USB HID core driver
[ 1.831698] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.832551] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.848492] sda: sda1 sda2 sda3
[ 1.861723] usb 2-2.4: new low-speed USB device number 4 using xhci_hcd
[ 1.865836] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.865961] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.872381] usb 1-1.3: New USB device found, idVendor=174f, idProduct=241a, bcdDevice= 0.13
[ 1.873306] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.874152] usb 1-1.3: Product: EasyCamera
[ 1.874961] usb 1-1.3: Manufacturer: Sonix Technology Co., Ltd.
[ 1.877768] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.886146] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.887184] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.888690] AVX2 version of gcm_enc/dec engaged.
[ 1.889583] AES CTR mode by8 optimization enabled
[ 1.897344] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:1C4F:0002.0001/input/input6
[ 1.946505] [drm] amdgpu kernel modesetting enabled.
[ 1.947498] Parsing CRAT table with 1 nodes
[ 1.948451] Creating topology SYSFS entries
[ 1.949304] Topology: Add APU node [0x0:0x0]
[ 1.950146] Finished initializing topology
[ 1.951027] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[ 1.951879] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0800000 -> 0xf0ffffff
[ 1.952725] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0400000 -> 0xf043ffff
[ 1.953558] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 1.953559] fb0: switching to amdgpudrmfb from EFI VGA
[ 1.954639] Console: switching to colour dummy device 80x25
[ 1.954685] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[ 1.955047] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x17AA:0x39F5 0xEA).
[ 1.955321] [drm] register mmio base: 0xF0400000
[ 1.955325] [drm] register mmio size: 262144
[ 1.955332] [drm] add ip block number 0 <vi_common>
[ 1.955334] [drm] add ip block number 1 <gmc_v8_0>
[ 1.955337] [drm] add ip block number 2 <cz_ih>
[ 1.955339] [drm] add ip block number 3 <gfx_v8_0>
[ 1.955342] [drm] add ip block number 4 <sdma_v3_0>
[ 1.955344] [drm] add ip block number 5 <powerplay>
[ 1.955347] [drm] add ip block number 6 <dm>
[ 1.955349] [drm] add ip block number 7 <uvd_v6_0>
[ 1.955351] [drm] add ip block number 8 <vce_v3_0>
[ 1.955354] [drm] add ip block number 9 <acp_ip>
[ 1.955359] amdgpu 0000:00:01.0: kfd not supported on this ASIC
[ 1.957703] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:10.0-2.3/input0
[ 1.957954] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.3/2-2.3:1.1/0003:1C4F:0002.0002/input/input7
[ 1.967499] [drm] BIOS signature incorrect 0 0
[ 1.967514] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[ 1.967523] caller pci_map_rom+0x71/0x1a0 mapping multiple BARs
[ 1.969793] ATOM BIOS: 113-C91400-007
[ 1.969817] [drm] UVD is enabled in physical mode
[ 1.969820] [drm] VCE enabled in VM mode
[ 1.969869] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 1.969878] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 1.969882] amdgpu 0000:00:01.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[ 1.969889] [drm] Detected VRAM RAM=512M, BAR=512M
[ 1.969892] [drm] RAM width 64bits UNKNOWN
[ 1.969964] [TTM] Zone kernel: Available graphics memory: 3799278 KiB
[ 1.969968] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 1.969970] [TTM] Initializing pool allocator
[ 1.969977] [TTM] Initializing DMA pool allocator
[ 1.970026] [drm] amdgpu: 512M of VRAM memory ready
[ 1.970031] [drm] amdgpu: 3072M of GTT memory ready.
[ 1.970050] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.970084] [drm] PCIE GART of 1024M enabled (table at 0x000000F400300000).
[ 1.971793] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu8_smu
[ 1.971971] [drm] Found UVD firmware Version: 1.43 Family ID: 15
[ 1.971978] [drm] UVD ENC is disabled
[ 1.972288] [drm] Found VCE firmware Version: 52.0 Binary ID: 3
[ 1.973080] smu version 26.17.00
[ 1.999244] usb 2-2.4: New USB device found, idVendor=17ef, idProduct=608d, bcdDevice= 1.00
[ 1.999250] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.999254] usb 2-2.4: Product: Lenovo USB Optical Mouse
[ 1.999257] usb 2-2.4: Manufacturer: PixArt
[ 2.001913] [drm] DM_PPLIB: values for Engine clock
[ 2.001921] [drm] DM_PPLIB: 200000
[ 2.001923] [drm] DM_PPLIB: 300000
[ 2.001925] [drm] DM_PPLIB: 400000
[ 2.001927] [drm] DM_PPLIB: 464520
[ 2.001928] [drm] DM_PPLIB: 514290
[ 2.001930] [drm] DM_PPLIB: 576000
[ 2.001932] [drm] DM_PPLIB: 654550
[ 2.001933] [drm] DM_PPLIB: 685720
[ 2.001935] [drm] DM_PPLIB: Validation clocks:
[ 2.001937] [drm] DM_PPLIB: engine_max_clock: 68572
[ 2.001939] [drm] DM_PPLIB: memory_max_clock: 106600
[ 2.001941] [drm] DM_PPLIB: level : 8
[ 2.001944] [drm] DM_PPLIB: values for Display clock
[ 2.001946] [drm] DM_PPLIB: 300000
[ 2.001948] [drm] DM_PPLIB: 400000
[ 2.001949] [drm] DM_PPLIB: 496560
[ 2.001951] [drm] DM_PPLIB: 626090
[ 2.001952] [drm] DM_PPLIB: 685720
[ 2.001954] [drm] DM_PPLIB: 757900
[ 2.001956] [drm] DM_PPLIB: 800000
[ 2.001957] [drm] DM_PPLIB: 847060
[ 2.001959] [drm] DM_PPLIB: Validation clocks:
[ 2.001961] [drm] DM_PPLIB: engine_max_clock: 68572
[ 2.001963] [drm] DM_PPLIB: memory_max_clock: 106600
[ 2.001965] [drm] DM_PPLIB: level : 8
[ 2.001967] [drm] DM_PPLIB: values for Memory clock
[ 2.001969] [drm] DM_PPLIB: 667000
[ 2.001970] [drm] DM_PPLIB: 1066000
[ 2.001972] [drm] DM_PPLIB: Validation clocks:
[ 2.001974] [drm] DM_PPLIB: engine_max_clock: 68572
[ 2.001976] [drm] DM_PPLIB: memory_max_clock: 106600
[ 2.001978] [drm] DM_PPLIB: level : 8
[ 2.010676] input: PixArt Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.4/2-2.4:1.0/0003:17EF:608D.0003/input/input9
[ 2.017985] hid-generic 0003:17EF:608D.0003: input,hidraw1: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-0000:00:10.0-2.4/input0
[ 2.018453] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.3/2-2.3:1.1/0003:1C4F:0002.0002/input/input8
[ 2.020261] hid-generic 0003:1C4F:0002.0002: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:10.0-2.3/input1
[ 2.025806] [drm] Display Core initialized with v3.2.48!
[ 2.033742] [drm] SADs count is: -2, don't need to read it
[ 2.061303] [drm] SADs count is: 0, don't need to read it
[ 2.061335] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.061337] [drm] Driver supports precise vblank timestamp query.
[ 2.087393] [drm] UVD initialized successfully.
[ 2.187637] [drm] VCE initialized successfully.
[ 2.189255] [drm] fb mappable at 0x1FF76E000
[ 2.189263] [drm] vram apper at 0x1FF000000
[ 2.189266] [drm] size 8294400
[ 2.189268] [drm] fb depth is 24
[ 2.189270] [drm] pitch is 7680
[ 2.189510] fbcon: amdgpudrmfb (fb0) is primary device
[ 2.205045] Console: switching to colour frame buffer device 170x48
[ 2.220989] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[ 2.255788] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:00:01.0 on minor 0
[ 2.561572] raid6: avx2x4 gen() 9378 MB/s
[ 2.609572] raid6: avx2x4 xor() 5374 MB/s
[ 2.657566] raid6: avx2x2 gen() 9970 MB/s
[ 2.705567] raid6: avx2x2 xor() 6665 MB/s
[ 2.753568] raid6: avx2x1 gen() 8676 MB/s
[ 2.801568] raid6: avx2x1 xor() 6011 MB/s
[ 2.849567] raid6: sse2x4 gen() 9748 MB/s
[ 2.897568] raid6: sse2x4 xor() 4621 MB/s
[ 2.945570] raid6: sse2x2 gen() 8429 MB/s
[ 2.993568] raid6: sse2x2 xor() 5907 MB/s
[ 3.041568] raid6: sse2x1 gen() 6128 MB/s
[ 3.089570] raid6: sse2x1 xor() 4349 MB/s
[ 3.089586] raid6: using algorithm avx2x2 gen() 9970 MB/s
[ 3.089604] raid6: .... xor() 6665 MB/s, rmw enabled
[ 3.089622] raid6: using avx2x2 recovery algorithm
[ 3.093200] xor: automatically using best checksumming function avx
[ 3.117846] Btrfs loaded, crc32c=crc32c-intel
[ 3.408767] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.257748] systemd[1]: Inserted module 'autofs4'
[ 5.461669] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.481900] systemd[1]: Detected architecture x86-64.
[ 5.529638] systemd[1]: Set hostname to <lenovo>.
[ 8.568372] systemd[1]: Created slice system-modprobe.slice.
[ 8.571076] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 8.573673] systemd[1]: Created slice User and Session Slice.
[ 8.576023] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.578578] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.580976] systemd[1]: Reached target Remote File Systems.
[ 8.583335] systemd[1]: Reached target Slices.
[ 8.585663] systemd[1]: Reached target Swap.
[ 8.588064] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 8.590572] systemd[1]: Listening on LVM2 poll daemon socket.
[ 8.593062] systemd[1]: Listening on Syslog Socket.
[ 8.595608] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.598194] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.600940] systemd[1]: Listening on Journal Audit Socket.
[ 8.603610] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.606319] systemd[1]: Listening on Journal Socket.
[ 8.608997] systemd[1]: Listening on udev Control Socket.
[ 8.611652] systemd[1]: Listening on udev Kernel Socket.
[ 8.615625] systemd[1]: Mounting Huge Pages File System...
[ 8.619770] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.624060] systemd[1]: Mounting Kernel Debug File System...
[ 8.628221] systemd[1]: Mounting Kernel Trace File System...
[ 8.632929] systemd[1]: Starting Journal Service...
[ 8.637819] systemd[1]: Starting Availability of block devices...
[ 8.642941] systemd[1]: Starting Set the console keyboard layout...
[ 8.649540] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 8.657710] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 8.663804] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 8.667197] systemd[1]: Started Nameserver information manager.
[ 8.674651] systemd[1]: Reached target Network (Pre).
[ 8.722880] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 8.723883] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 8.727363] systemd[1]: Starting Load Kernel Modules...
[ 8.731547] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.736080] systemd[1]: Starting udev Coldplug all Devices...
[ 8.740315] systemd[1]: Starting Uncomplicated firewall...
[ 8.745145] systemd[1]: Mounted Huge Pages File System.
[ 8.748053] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.750775] systemd[1]: Mounted Kernel Debug File System.
[ 8.753393] systemd[1]: Mounted Kernel Trace File System.
[ 8.756610] systemd[1]: Finished Availability of block devices.
[ 8.783866] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 8.802126] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 8.827499] systemd[1]: Finished Uncomplicated firewall.
[ 8.918939] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.921836] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 8.948680] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 8.949764] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 8.952064] systemd[1]: Starting Load/Save Random Seed...
[ 8.959378] systemd[1]: Starting Create System Users...
[ 9.092760] systemd[1]: Finished udev Coldplug all Devices.
[ 9.214816] systemd[1]: Finished Set the console keyboard layout.
[ 9.221148] lp: driver loaded but no devices found
[ 9.229151] ppdev: user-space parallel port driver
[ 9.235299] systemd[1]: Finished Load Kernel Modules.
[ 9.238849] systemd[1]: Started Journal Service.
[ 9.314918] systemd-journald[313]: Received client request to flush runtime journal.
[ 13.972610] elan_i2c i2c-ELAN0621:00: i2c-ELAN0621:00 supply vcc not found, using dummy regulator
[ 14.066214] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 14.066496] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.087338] elan_i2c i2c-ELAN0621:00: Elan Touchpad: Module ID: 0x005b, Firmware: 0x0001, Sample: 0x0002, IAP: 0x000d
[ 14.087503] input: Elan Touchpad as /devices/platform/AMD0010:00/i2c-0/i2c-ELAN0621:00/input/input10
[ 14.295116] rtl8821ce: loading out-of-tree module taints kernel.
[ 14.297057] rtl8821ce: module verification failed: signature and/or required key missing - tainting kernel
[ 14.733875] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input11
[ 15.242108] Bluetooth: Core ver 2.22
[ 15.242168] NET: Registered protocol family 31
[ 15.242169] Bluetooth: HCI device and connection manager initialized
[ 15.242389] Bluetooth: HCI socket layer initialized
[ 15.242392] Bluetooth: L2CAP socket layer initialized
[ 15.242399] Bluetooth: SCO socket layer initialized
[ 15.243812] mc: Linux media interface: v0.10
[ 15.331000] videodev: Linux video capture interface: v2.00
[ 15.451387] rtl8821ce 0000:02:00.0 wlp2s0: renamed from wlan0
[ 15.497321] kvm: Nested Virtualization enabled
[ 15.497329] kvm: Nested Paging enabled
[ 15.497329] SVM: Virtual VMLOAD VMSAVE supported
[ 15.855571] usbcore: registered new interface driver btusb
[ 15.859052] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
[ 15.860024] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 15.860027] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
[ 15.918992] MCE: In-kernel MCE decoding enabled.
[ 16.186394] uvcvideo: Found UVC 1.00 device EasyCamera (174f:241a)
[ 16.196628] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input12
[ 16.196720] usbcore: registered new interface driver uvcvideo
[ 16.196722] USB Video Class driver (1.1.1)
[ 16.213168] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
[ 16.234974] Bluetooth: hci0: RTL: cfg_sz 10, total sz 31298
[ 16.301861] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 16.356084] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 16.358838] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input13
[ 16.753078] Bluetooth: hci0: RTL: fw version 0x829a21e4
[ 16.900732] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 16.900736] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.900738] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 16.900739] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 16.900740] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 16.900742] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 16.900743] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 16.946715] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input14
[ 16.946787] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input15
[ 19.324472] audit: type=1400 audit(1672279663.757:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=648 comm="apparmor_parser"
[ 19.324477] audit: type=1400 audit(1672279663.757:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=648 comm="apparmor_parser"
[ 19.324480] audit: type=1400 audit(1672279663.757:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=648 comm="apparmor_parser"
[ 19.474005] audit: type=1400 audit(1672279663.909:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=650 comm="apparmor_parser"
[ 19.624651] audit: type=1400 audit(1672279664.057:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=651 comm="apparmor_parser"
[ 19.626898] audit: type=1400 audit(1672279664.061:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=652 comm="apparmor_parser"
[ 19.643652] audit: type=1400 audit(1672279664.077:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=654 comm="apparmor_parser"
[ 19.643658] audit: type=1400 audit(1672279664.077:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=654 comm="apparmor_parser"
[ 19.666039] audit: type=1400 audit(1672279664.101:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=653 comm="apparmor_parser"
[ 19.857800] audit: type=1400 audit(1672279664.293:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=655 comm="apparmor_parser"
[ 30.853683] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.853686] Bluetooth: BNEP filters: protocol multicast
[ 30.853693] Bluetooth: BNEP socket layer initialized
[ 31.051753] NET: Registered protocol family 38
[ 32.223127] Bluetooth: RFCOMM TTY layer initialized
[ 32.223136] Bluetooth: RFCOMM socket layer initialized
[ 32.223147] Bluetooth: RFCOMM ver 1.11
[ 33.538001] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-100:00, irq=IGNORE)
[ 33.652052] r8169 0000:01:00.0 enp1s0: Link is Down
[ 37.267232] kauditd_printk_skb: 44 callbacks suppressed
[ 37.267234] audit: type=1400 audit(1672279681.701:56): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=888 comm="cups-browsed" capability=23 capname="sys_nice"
[ 38.724284] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 42.060392] vboxdrv: Found 2 processor cores
[ 42.078211] vboxdrv: TSC mode is Invariant, tentative frequency 2595121400 Hz
[ 42.078214] vboxdrv: Successfully loaded version 6.1.38_Ubuntu r153438 (interface 0x00320000)
[ 42.431216] VBoxNetFlt: Successfully started.
[ 42.554863] VBoxNetAdp: Successfully started.
[ 44.928302] aufs 5.4.3-20200302
[ 52.519578] audit: type=1400 audit(1672279696.953:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1139 comm="apparmor_parser"
[ 56.574500] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 56.597766] Bridge firewalling registered
[ 56.665325] bpfilter: Loaded bpfilter_umh pid 1148
[ 56.665891] Started bpfilter
[ 57.016594] Initializing XFRM netlink socket
[ 1174.701669] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 1174.701703]
Initialized Local Variables for Method [APCL]:
[ 1174.701705] Local0: 00000000a2220777 <Obj> Integer 0000000000000000
[ 1174.701718] No Arguments are initialized for method [APCL]
[ 1174.701725] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1174.701750] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1174.701816] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1179.213707] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 1179.213738]
Initialized Local Variables for Method [APCL]:
[ 1179.213740] Local0: 000000009a9cb47b <Obj> Integer 0000000000000000
[ 1179.213752] No Arguments are initialized for method [APCL]
[ 1179.213756] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1179.213774] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1179.213787] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2081.187991] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 2081.188027]
Initialized Local Variables for Method [APCL]:
[ 2081.188029] Local0: 00000000e48ff560 <Obj> Integer 0000000000000005
[ 2081.188042] No Arguments are initialized for method [APCL]
[ 2081.188048] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2081.188074] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2081.188138] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2082.564070] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 2082.564101]
Initialized Local Variables for Method [APCL]:
[ 2082.564103] Local0: 00000000e48ff560 <Obj> Integer 0000000000000004
[ 2082.564115] No Arguments are initialized for method [APCL]
[ 2082.564122] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2082.564144] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2082.564205] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2085.540080] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 2085.540112]
Initialized Local Variables for Method [APCL]:
[ 2085.540114] Local0: 000000008c4b57fc <Obj> Integer 0000000000000003
[ 2085.540126] No Arguments are initialized for method [APCL]
[ 2085.540130] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2085.540148] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2085.540161] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2088.516205] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 2088.518308]
Initialized Local Variables for Method [APCL]:
[ 2088.518310] Local0: 0000000062f300cf <Obj> Integer 0000000000000002
[ 2088.518322] No Arguments are initialized for method [APCL]
[ 2088.518327] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2088.521081] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2088.523263] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2091.492269] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 2091.494489]
Initialized Local Variables for Method [APCL]:
[ 2091.494491] Local0: 000000008c4b57fc <Obj> Integer 0000000000000001
[ 2091.494503] No Arguments are initialized for method [APCL]
[ 2091.494507] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2091.496863] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2091.499344] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2094.468385] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 2094.470663]
Initialized Local Variables for Method [APCL]:
[ 2094.470665] Local0: 0000000062f300cf <Obj> Integer 0000000000000000
[ 2094.470677] No Arguments are initialized for method [APCL]
[ 2094.470681] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2094.473016] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2094.475551] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2097.436882] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 2097.439178]
Initialized Local Variables for Method [APCL]:
[ 2097.439180] Local0: 00000000d4192d17 <Obj> Integer 0000000000000000
[ 2097.439192] No Arguments are initialized for method [APCL]
[ 2097.439200] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2097.442416] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2097.445070] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2100.412982] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 2100.415316]
Initialized Local Variables for Method [APCL]:
[ 2100.415318] Local0: 0000000096e56765 <Obj> Integer 0000000000000000
[ 2100.415330] No Arguments are initialized for method [APCL]
[ 2100.415339] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2100.418764] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2100.420868] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 2106.758245] PM: suspend entry (deep)
[ 2107.127161] Filesystems sync: 0.368 seconds
[ 2107.127756] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 2107.131239] OOM killer disabled.
[ 2107.131240] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2107.132733] printk: Suspending console(s) (use no_console_suspend to debug)
[ 2107.156945] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2107.262768] sd 0:0:0:0: [sda] Stopping disk
[ 2108.147868] ACPI: EC: interrupt blocked
[ 2108.164689] snd_hda_intel 0000:00:09.2: Refused to change power state, currently in D0
[ 2108.165217] ACPI: Preparing to enter system sleep state S3
[ 2108.170806] ACPI: EC: event blocked
[ 2108.170807] ACPI: EC: EC stopped
[ 2108.170808] PM: Saving platform NVS memory
[ 2108.170877] Disabling non-boot CPUs ...
[ 2108.171283] IRQ 18: no longer affine to CPU1
[ 2108.171296] IRQ 36: no longer affine to CPU1
[ 2108.172413] smpboot: CPU 1 is now offline
[ 2108.177001] ACPI: Low-level resume complete
[ 2108.177020] ACPI: EC: EC started
[ 2108.177021] PM: Restoring platform NVS memory
[ 2108.177106] LVT offset 0 assigned for vector 0x400
[ 2108.177380] Enabling non-boot CPUs ...
[ 2108.177437] x86: Booting SMP configuration:
[ 2108.177438] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 2108.177607] microcode: CPU1: patch_level=0x06006705
[ 2108.180186] CPU1 is up
[ 2108.180567] ACPI: Waking up from system sleep state S3
[ 2108.210708] ACPI: EC: interrupt unblocked
[ 2108.250682] ACPI: EC: event unblocked
[ 2108.251244] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
[ 2108.251266] smu version 26.17.00
[ 2108.274542] sd 0:0:0:0: [sda] Starting disk
[ 2108.306501] [drm] SADs count is: 0, don't need to read it
[ 2108.354289] [drm] UVD initialized successfully.
[ 2108.454501] [drm] VCE initialized successfully.
[ 2108.506031] usb 2-2: reset high-speed USB device number 2 using xhci_hcd
[ 2108.537338] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[ 2108.725348] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 2108.749345] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2108.754017] ata2.00: configured for UDMA/33
[ 2108.782681] usb 3-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2109.163883] usb 2-2.4: reset low-speed USB device number 4 using xhci_hcd
[ 2109.724036] usb 2-2.3: reset low-speed USB device number 3 using xhci_hcd
[ 2110.029152] acpi LNXPOWER:05: Turning OFF
[ 2110.029277] OOM killer enabled.
[ 2110.029278] Restarting tasks ...
[ 2110.043561] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
[ 2110.044521] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 2110.044525] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
[ 2110.044551] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
[ 2110.044572] Bluetooth: hci0: RTL: cfg_sz 10, total sz 31298
[ 2110.057302] done.
[ 2110.057994] PM: suspend exit
[ 2110.553485] Bluetooth: hci0: RTL: fw version 0x829a21e4
[ 2110.789389] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2110.966978] ata1.00: configured for UDMA/100
[ 2111.063668] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-100:00, irq=IGNORE)
[ 2111.166485] r8169 0000:01:00.0 enp1s0: Link is Down
[ 2111.445490] ideapad_laptop: Unknown event: 10
[ 2114.826310] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 6634.160536] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6634.160567]
Initialized Local Variables for Method [APCL]:
[ 6634.160569] Local0: 00000000fb911e44 <Obj> Integer 0000000000000000
[ 6634.160580] No Arguments are initialized for method [APCL]
[ 6634.160587] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6634.160639] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6634.160669] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6641.719891] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6641.719925]
Initialized Local Variables for Method [APCL]:
[ 6641.719927] Local0: 0000000051792aa5 <Obj> Integer 0000000000000000
[ 6641.719939] No Arguments are initialized for method [APCL]
[ 6641.719946] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6641.720016] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6641.720046] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6979.558793] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6979.558828]
Initialized Local Variables for Method [APCL]:
[ 6979.558830] Local0: 00000000476b2572 <Obj> Integer 0000000000000005
[ 6979.558842] No Arguments are initialized for method [APCL]
[ 6979.558851] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6979.558874] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6979.558933] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6981.006488] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6981.006520]
Initialized Local Variables for Method [APCL]:
[ 6981.006522] Local0: 00000000af33df51 <Obj> Integer 0000000000000004
[ 6981.006534] No Arguments are initialized for method [APCL]
[ 6981.006538] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6981.006556] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6981.006569] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6983.982850] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6983.982886]
Initialized Local Variables for Method [APCL]:
[ 6983.982888] Local0: 00000000476b2572 <Obj> Integer 0000000000000003
[ 6983.982901] No Arguments are initialized for method [APCL]
[ 6983.982909] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6983.982978] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6983.982998] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6986.991282] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6986.991317]
Initialized Local Variables for Method [APCL]:
[ 6986.991318] Local0: 000000008f066df4 <Obj> Integer 0000000000000002
[ 6986.991331] No Arguments are initialized for method [APCL]
[ 6986.991338] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6986.991363] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6986.991428] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6989.967662] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6989.967693]
Initialized Local Variables for Method [APCL]:
[ 6989.967695] Local0: 0000000047701dad <Obj> Integer 0000000000000001
[ 6989.967707] No Arguments are initialized for method [APCL]
[ 6989.967711] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6989.967729] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6989.967742] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6992.943948] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6992.943980]
Initialized Local Variables for Method [APCL]:
[ 6992.943982] Local0: 00000000af33df51 <Obj> Integer 0000000000000000
[ 6992.943994] No Arguments are initialized for method [APCL]
[ 6992.943998] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6992.944015] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6992.944028] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6995.944722] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6995.944757]
Initialized Local Variables for Method [APCL]:
[ 6995.944759] Local0: 0000000047701dad <Obj> Integer 0000000000000000
[ 6995.944791] No Arguments are initialized for method [APCL]
[ 6995.944796] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6995.944832] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6995.944845] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6998.928725] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 6998.928752]
Initialized Local Variables for Method [APCL]:
[ 6998.928753] Local0: 00000000476b2572 <Obj> Integer 0000000000000000
[ 6998.928763] No Arguments are initialized for method [APCL]
[ 6998.928768] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6998.928809] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 6998.928827] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7822.124999] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 7822.125021]
Initialized Local Variables for Method [APCL]:
[ 7822.125023] Local0: 00000000ef7672b9 <Obj> Integer 0000000000000000
[ 7822.125031] No Arguments are initialized for method [APCL]
[ 7822.125034] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7822.125047] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7822.125055] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7852.363917] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 7852.363937]
Initialized Local Variables for Method [APCL]:
[ 7852.363938] Local0: 000000002852d731 <Obj> Integer 0000000000000001
[ 7852.363945] No Arguments are initialized for method [APCL]
[ 7852.363948] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7852.363959] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7852.363967] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7864.490842] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 7864.490884]
Initialized Local Variables for Method [APCL]:
[ 7864.490886] Local0: 000000002852d731 <Obj> Integer 0000000000000001
[ 7864.490898] No Arguments are initialized for method [APCL]
[ 7864.490901] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7864.490914] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7864.490923] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7873.578024] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20190816/psargs-330)
[ 7873.578055]
Initialized Local Variables for Method [APCL]:
[ 7873.578057] Local0: 000000002852d731 <Obj> Integer 0000000000000000
[ 7873.578069] No Arguments are initialized for method [APCL]
[ 7873.578073] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7873.578091] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 7873.578104] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
~
Xorg.log on Ubuntu
------------------
[ 276.825]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 276.825] Build Operating System: Linux 4.15.0-124-generic x86_64 Ubuntu
[ 276.825] Current Operating System: Linux lenovo 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 x86_64
[ 276.832] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=6e3a2546-613c-4ab1-bb48-eeb884a51988 ro text
[ 276.832] Build Date: 30 November 2020 05:56:33PM
[ 276.832] xorg-server 2:1.20.8-2ubuntu2.6 (For technical support please see http://www.ubuntu.com/support)
[ 276.832] Current version of pixman: 0.38.4
[ 276.832] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 276.832] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 276.832] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 16 06:55:32 2020
[ 276.910] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 276.910] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 276.990] (==) No Layout section. Using the first Screen section.
[ 276.990] (==) No screen section available. Using defaults.
[ 276.990] (**) |-->Screen "Default Screen Section" (0)
[ 276.990] (**) | |-->Monitor "<default monitor>"
[ 276.991] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 276.991] (==) Automatically adding devices
[ 276.991] (==) Automatically enabling devices
[ 276.991] (==) Automatically adding GPU devices
[ 276.991] (==) Automatically binding GPU devices
[ 276.991] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 277.080] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 277.080] Entry deleted from font path.
[ 277.080] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 277.080] Entry deleted from font path.
[ 277.080] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 277.080] Entry deleted from font path.
[ 277.081] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 277.081] Entry deleted from font path.
[ 277.081] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 277.081] Entry deleted from font path.
[ 277.081] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 277.081] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 277.081] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 277.081] (II) Loader magic: 0x5633a1407020
[ 277.081] (II) Module ABI versions:
[ 277.081] X.Org ANSI C Emulation: 0.4
[ 277.081] X.Org Video Driver: 24.1
[ 277.081] X.Org XInput driver : 24.1
[ 277.081] X.Org Server Extension : 10.0
[ 277.082] (--) using VT number 2
[ 277.082] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 277.083] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 277.095] (--) PCI:*(0@0:1:0) 1002:98e4:17aa:39f5 rev 234, Mem @ 0xe8000000/134217728, 0xf0800000/8388608, 0xf0400000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 277.095] (II) LoadModule: "glx"
[ 277.187] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 277.253] (II) Module glx: vendor="X.Org Foundation"
[ 277.253] compiled for 1.20.8, module version = 1.0.0
[ 277.253] ABI class: X.Org Server Extension, version 10.0
[ 277.253] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 277.253] loading driver: amdgpu
[ 277.253] (==) Matched amdgpu as autoconfigured driver 0
[ 277.253] (==) Matched ati as autoconfigured driver 1
[ 277.254] (==) Matched modesetting as autoconfigured driver 2
[ 277.254] (==) Matched fbdev as autoconfigured driver 3
[ 277.254] (==) Matched vesa as autoconfigured driver 4
[ 277.254] (==) Assigned the driver to the xf86ConfigLayout
[ 277.254] (II) LoadModule: "amdgpu"
[ 277.254] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 277.299] (II) Module amdgpu: vendor="X.Org Foundation"
[ 277.299] compiled for 1.20.5, module version = 19.1.0
[ 277.299] Module class: X.Org Video Driver
[ 277.299] ABI class: X.Org Video Driver, version 24.0
[ 277.299] (II) LoadModule: "ati"
[ 277.299] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 277.300] (II) Module ati: vendor="X.Org Foundation"
[ 277.300] compiled for 1.20.5, module version = 19.1.0
[ 277.300] Module class: X.Org Video Driver
[ 277.300] ABI class: X.Org Video Driver, version 24.0
[ 277.307] (II) LoadModule: "modesetting"
[ 277.307] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 277.333] (II) Module modesetting: vendor="X.Org Foundation"
[ 277.333] compiled for 1.20.8, module version = 1.20.8
[ 277.333] Module class: X.Org Video Driver
[ 277.333] ABI class: X.Org Video Driver, version 24.1
[ 277.333] (II) LoadModule: "fbdev"
[ 277.333] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 277.355] (II) Module fbdev: vendor="X.Org Foundation"
[ 277.355] compiled for 1.20.1, module version = 0.5.0
[ 277.355] Module class: X.Org Video Driver
[ 277.355] ABI class: X.Org Video Driver, version 24.0
[ 277.355] (II) LoadModule: "vesa"
[ 277.355] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 277.360] (II) Module vesa: vendor="X.Org Foundation"
[ 277.360] compiled for 1.20.4, module version = 2.4.0
[ 277.360] Module class: X.Org Video Driver
[ 277.360] ABI class: X.Org Video Driver, version 24.0
[ 277.360] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 277.360] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 277.360] (II) FBDEV: driver for framebuffer: fbdev
[ 277.360] (II) VESA: driver for VESA chipsets: vesa
[ 277.376] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 277.418] (WW) Falling back to old probe method for modesetting
[ 277.418] (WW) Falling back to old probe method for fbdev
[ 277.418] (II) Loading sub module "fbdevhw"
[ 277.418] (II) LoadModule: "fbdevhw"
[ 277.418] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 277.419] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 277.419] compiled for 1.20.8, module version = 0.0.2
[ 277.419] ABI class: X.Org Video Driver, version 24.1
[ 277.419] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 277.419] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 277.419] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 277.419] (==) AMDGPU(0): Default visual is TrueColor
[ 277.419] (==) AMDGPU(0): RGB weight 888
[ 277.419] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 277.419] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x98e4)
[ 277.419] (II) Loading sub module "fb"
[ 277.419] (II) LoadModule: "fb"
[ 277.420] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 277.430] (II) Module fb: vendor="X.Org Foundation"
[ 277.430] compiled for 1.20.8, module version = 1.0.0
[ 277.430] ABI class: X.Org ANSI C Emulation, version 0.4
[ 277.430] (II) Loading sub module "dri2"
[ 277.430] (II) LoadModule: "dri2"
[ 277.430] (II) Module "dri2" already built-in
[ 278.382] (II) Loading sub module "glamoregl"
[ 278.382] (II) LoadModule: "glamoregl"
[ 278.382] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 278.416] (II) Module glamoregl: vendor="X.Org Foundation"
[ 278.417] compiled for 1.20.8, module version = 1.0.1
[ 278.417] ABI class: X.Org ANSI C Emulation, version 0.4
[ 278.539] (II) AMDGPU(0): glamor X acceleration enabled on AMD STONEY (DRM 3.35.0, 5.4.0-58-generic, LLVM 10.0.0)
[ 278.539] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 278.539] (==) AMDGPU(0): TearFree property default: auto
[ 278.539] (==) AMDGPU(0): VariableRefresh: disabled
[ 278.539] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 278.540] (II) AMDGPU(0): Output eDP has no monitor section
[ 278.540] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 278.557] (II) AMDGPU(0): EDID for output eDP
[ 278.557] (II) AMDGPU(0): Manufacturer: AUO Model: 71ec Serial#: 0
[ 278.557] (II) AMDGPU(0): Year: 2015 Week: 24
[ 278.557] (II) AMDGPU(0): EDID Version: 1.4
[ 278.557] (II) AMDGPU(0): Digital Display Input
[ 278.557] (II) AMDGPU(0): 6 bits per channel
[ 278.557] (II) AMDGPU(0): Digital interface is DisplayPort
[ 278.557] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 278.557] (II) AMDGPU(0): Gamma: 2.20
[ 278.557] (II) AMDGPU(0): No DPMS capabilities specified
[ 278.557] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 278.557] (II) AMDGPU(0): First detailed timing is preferred mode
[ 278.557] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 278.557] (II) AMDGPU(0): redX: 0.575 redY: 0.345 greenX: 0.340 greenY: 0.570
[ 278.557] (II) AMDGPU(0): blueX: 0.160 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 278.557] (II) AMDGPU(0): Manufacturer's mask: 0
[ 278.557] (II) AMDGPU(0): Supported detailed timing:
[ 278.557] (II) AMDGPU(0): clock: 76.3 MHz Image Size: 344 x 193 mm
[ 278.557] (II) AMDGPU(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1558 h_border: 0
[ 278.557] (II) AMDGPU(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 816 v_border: 0
[ 278.557] (II) AMDGPU(0): Unknown vendor-specific block f
[ 278.557] (II) AMDGPU(0): AUO
[ 278.557] (II) AMDGPU(0): B156XTN07.1
[ 278.557] (II) AMDGPU(0): EDID (in hex):
[ 278.557] (II) AMDGPU(0): 00ffffffffffff0006afec7100000000
[ 278.557] (II) AMDGPU(0): 18190104952213780250259358579229
[ 278.557] (II) AMDGPU(0): 22505400000001010101010101010101
[ 278.557] (II) AMDGPU(0): 010101010101ce1d56c050003030080a
[ 278.557] (II) AMDGPU(0): 310058c1100000180000000f00000000
[ 278.557] (II) AMDGPU(0): 00000000000000000020000000fe0041
[ 278.557] (II) AMDGPU(0): 554f0a202020202020202020000000fe
[ 278.557] (II) AMDGPU(0): 004231353658544e30372e31200a00fb
[ 278.557] (II) AMDGPU(0): Printing probed modes for output eDP
[ 278.557] (II) AMDGPU(0): Modeline "1366x768"x60.0 76.30 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz eP)
[ 278.557] (II) AMDGPU(0): Modeline "1280x720"x60.0 76.30 1280 1374 1384 1558 720 771 772 816 -hsync -vsync (49.0 kHz e)
[ 278.557] (II) AMDGPU(0): Modeline "1024x768"x60.0 76.30 1024 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz e)
[ 278.557] (II) AMDGPU(0): Modeline "800x600"x60.0 76.30 800 1374 1384 1558 600 771 772 816 -hsync -vsync (49.0 kHz e)
[ 278.557] (II) AMDGPU(0): Modeline "640x480"x60.0 76.30 640 1374 1384 1558 480 771 772 816 -hsync -vsync (49.0 kHz e)
[ 278.557] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 278.557] (II) AMDGPU(0): Output eDP connected
[ 278.557] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 278.557] (II) AMDGPU(0): Using exact sizes for initial modes
[ 278.557] (II) AMDGPU(0): Output eDP using initial mode 1366x768 +0+0
[ 278.557] (II) AMDGPU(0): mem size init: gart size :b30a8000 vram size: s:4772000 visible:4772000
[ 278.557] (==) AMDGPU(0): DPI set to (96, 96)
[ 278.557] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 278.557] (II) Loading sub module "ramdac"
[ 278.557] (II) LoadModule: "ramdac"
[ 278.557] (II) Module "ramdac" already built-in
[ 278.557] (II) UnloadModule: "modesetting"
[ 278.557] (II) Unloading modesetting
[ 278.558] (II) UnloadModule: "fbdev"
[ 278.558] (II) Unloading fbdev
[ 278.558] (II) UnloadSubModule: "fbdevhw"
[ 278.558] (II) Unloading fbdevhw
[ 278.558] (II) UnloadModule: "vesa"
[ 278.558] (II) Unloading vesa
[ 278.559] (II) AMDGPU(0): [DRI2] Setup complete
[ 278.559] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 278.559] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 278.559] (II) AMDGPU(0): Front buffer pitch: 5504 bytes
[ 278.576] (II) AMDGPU(0): SYNC extension fences enabled
[ 278.576] (II) AMDGPU(0): Present extension enabled
[ 278.576] (==) AMDGPU(0): DRI3 enabled
[ 278.576] (==) AMDGPU(0): Backing store enabled
[ 278.576] (II) AMDGPU(0): Direct rendering enabled
[ 278.689] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 278.689] (II) AMDGPU(0): Acceleration enabled
[ 278.689] (==) AMDGPU(0): DPMS enabled
[ 278.689] (==) AMDGPU(0): Silken mouse enabled
[ 278.689] (II) AMDGPU(0): Set up textured video (glamor)
[ 278.707] (II) Initializing extension Generic Event Extension
[ 278.708] (II) Initializing extension SHAPE
[ 278.708] (II) Initializing extension MIT-SHM
[ 278.709] (II) Initializing extension XInputExtension
[ 278.709] (II) Initializing extension XTEST
[ 278.710] (II) Initializing extension BIG-REQUESTS
[ 278.710] (II) Initializing extension SYNC
[ 278.710] (II) Initializing extension XKEYBOARD
[ 278.711] (II) Initializing extension XC-MISC
[ 278.711] (II) Initializing extension SECURITY
[ 278.711] (II) Initializing extension XFIXES
[ 278.712] (II) Initializing extension RENDER
[ 278.712] (II) Initializing extension RANDR
[ 278.713] (II) Initializing extension COMPOSITE
[ 278.713] (II) Initializing extension DAMAGE
[ 278.714] (II) Initializing extension MIT-SCREEN-SAVER
[ 278.714] (II) Initializing extension DOUBLE-BUFFER
[ 278.714] (II) Initializing extension RECORD
[ 278.715] (II) Initializing extension DPMS
[ 278.715] (II) Initializing extension Present
[ 278.715] (II) Initializing extension DRI3
[ 278.716] (II) Initializing extension X-Resource
[ 278.716] (II) Initializing extension XVideo
[ 278.716] (II) Initializing extension XVideo-MotionCompensation
[ 278.716] (II) Initializing extension SELinux
[ 278.716] (II) SELinux: Disabled on system
[ 278.716] (II) Initializing extension GLX
[ 278.723] (II) AIGLX: Loaded and initialized radeonsi
[ 278.723] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 278.723] (II) Initializing extension XFree86-VidModeExtension
[ 278.724] (II) Initializing extension XFree86-DGA
[ 278.724] (II) Initializing extension XFree86-DRI
[ 278.724] (II) Initializing extension DRI2
[ 278.726] (II) AMDGPU(0): Setting screen physical size to 361 x 203
[ 279.879] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 279.879] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 279.879] (**) Power Button: Applying InputClass "system-keyboard"
[ 279.879] (II) LoadModule: "libinput"
[ 279.901] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 279.960] (II) Module libinput: vendor="X.Org Foundation"
[ 279.960] compiled for 1.20.4, module version = 0.29.0
[ 279.960] Module class: X.Org XInput Driver
[ 279.960] ABI class: X.Org XInput driver, version 24.1
[ 279.960] (II) Using input driver 'libinput' for 'Power Button'
[ 279.960] (**) Power Button: always reports core events
[ 279.960] (**) Option "Device" "/dev/input/event2"
[ 279.960] (**) Option "_source" "server/udev"
[ 279.989] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 279.989] (II) event2 - Power Button: device is a keyboard
[ 279.989] (II) event2 - Power Button: device removed
[ 280.004] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 280.005] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 280.005] (**) Option "xkb_model" "pc105"
[ 280.005] (**) Option "xkb_layout" "in"
[ 280.005] (**) Option "xkb_variant" "eng"
[ 280.005] (**) Option "xkb_options" "grp_led:scroll"
[ 280.092] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 280.092] (II) event2 - Power Button: device is a keyboard
[ 280.093] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 280.093] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 280.093] (**) Video Bus: Applying InputClass "system-keyboard"
[ 280.093] (II) Using input driver 'libinput' for 'Video Bus'
[ 280.093] (**) Video Bus: always reports core events
[ 280.093] (**) Option "Device" "/dev/input/event4"
[ 280.093] (**) Option "_source" "server/udev"
[ 280.094] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 280.094] (II) event4 - Video Bus: device is a keyboard
[ 280.094] (II) event4 - Video Bus: device removed
[ 280.108] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event4"
[ 280.108] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 280.108] (**) Option "xkb_model" "pc105"
[ 280.109] (**) Option "xkb_layout" "in"
[ 280.109] (**) Option "xkb_variant" "eng"
[ 280.109] (**) Option "xkb_options" "grp_led:scroll"
[ 280.111] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 280.112] (II) event4 - Video Bus: device is a keyboard
[ 280.113] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 280.113] (II) No input driver specified, ignoring this device.
[ 280.113] (II) This device may have been added with another device file.
[ 280.114] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 280.114] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 280.114] (**) Power Button: Applying InputClass "system-keyboard"
[ 280.114] (II) Using input driver 'libinput' for 'Power Button'
[ 280.114] (**) Power Button: always reports core events
[ 280.114] (**) Option "Device" "/dev/input/event1"
[ 280.114] (**) Option "_source" "server/udev"
[ 280.116] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 280.117] (II) event1 - Power Button: device is a keyboard
[ 280.117] (II) event1 - Power Button: device removed
[ 280.128] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[ 280.128] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 280.129] (**) Option "xkb_model" "pc105"
[ 280.129] (**) Option "xkb_layout" "in"
[ 280.129] (**) Option "xkb_variant" "eng"
[ 280.129] (**) Option "xkb_options" "grp_led:scroll"
[ 280.131] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 280.131] (II) event1 - Power Button: device is a keyboard
[ 280.133] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[ 280.133] (II) No input driver specified, ignoring this device.
[ 280.133] (II) This device may have been added with another device file.
[ 280.134] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event9)
[ 280.134] (II) No input driver specified, ignoring this device.
[ 280.134] (II) This device may have been added with another device file.
[ 280.135] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event8)
[ 280.135] (II) No input driver specified, ignoring this device.
[ 280.135] (II) This device may have been added with another device file.
[ 280.136] (II) config/udev: Adding input device EasyCamera: EasyCamera (/dev/input/event10)
[ 280.137] (**) EasyCamera: EasyCamera: Applying InputClass "libinput keyboard catchall"
[ 280.137] (**) EasyCamera: EasyCamera: Applying InputClass "system-keyboard"
[ 280.137] (II) Using input driver 'libinput' for 'EasyCamera: EasyCamera'
[ 280.137] (**) EasyCamera: EasyCamera: always reports core events
[ 280.137] (**) Option "Device" "/dev/input/event10"
[ 280.137] (**) Option "_source" "server/udev"
[ 280.140] (II) event10 - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[ 280.140] (II) event10 - EasyCamera: EasyCamera: device is a keyboard
[ 280.140] (II) event10 - EasyCamera: EasyCamera: device removed
[ 280.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11/event10"
[ 280.176] (II) XINPUT: Adding extended input device "EasyCamera: EasyCamera" (type: KEYBOARD, id 9)
[ 280.176] (**) Option "xkb_model" "pc105"
[ 280.176] (**) Option "xkb_layout" "in"
[ 280.176] (**) Option "xkb_variant" "eng"
[ 280.176] (**) Option "xkb_options" "grp_led:scroll"
[ 280.180] (II) event10 - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[ 280.181] (II) event10 - EasyCamera: EasyCamera: device is a keyboard
[ 280.182] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[ 280.182] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 280.182] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 280.182] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 280.182] (**) Ideapad extra buttons: always reports core events
[ 280.182] (**) Option "Device" "/dev/input/event5"
[ 280.182] (**) Option "_source" "server/udev"
[ 280.185] (II) event5 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 280.185] (II) event5 - Ideapad extra buttons: device is a keyboard
[ 280.185] (II) event5 - Ideapad extra buttons: device removed
[ 280.204] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input6/event5"
[ 280.204] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 10)
[ 280.204] (**) Option "xkb_model" "pc105"
[ 280.204] (**) Option "xkb_layout" "in"
[ 280.204] (**) Option "xkb_variant" "eng"
[ 280.204] (**) Option "xkb_options" "grp_led:scroll"
[ 280.207] (II) event5 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 280.207] (II) event5 - Ideapad extra buttons: device is a keyboard
[ 280.209] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event6)
[ 280.209] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[ 280.209] (II) Using input driver 'libinput' for 'Elan Touchpad'
[ 280.209] (**) Elan Touchpad: always reports core events
[ 280.209] (**) Option "Device" "/dev/input/event6"
[ 280.209] (**) Option "_source" "server/udev"
[ 280.211] (II) event6 - Elan Touchpad: is tagged by udev as: Touchpad
[ 280.214] (II) event6 - Elan Touchpad: device is a touchpad
[ 280.214] (II) event6 - Elan Touchpad: device removed
[ 280.249] (**) Option "config_info" "udev:/sys/devices/platform/AMD0010:00/i2c-0/i2c-ELAN0621:00/input/input7/event6"
[ 280.249] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 11)
[ 280.251] (**) Option "AccelerationScheme" "none"
[ 280.252] (**) Elan Touchpad: (accel) selected scheme none/0
[ 280.252] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[ 280.252] (**) Elan Touchpad: (accel) acceleration threshold: 4
[ 280.254] (II) event6 - Elan Touchpad: is tagged by udev as: Touchpad
[ 280.257] (II) event6 - Elan Touchpad: device is a touchpad
[ 280.258] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse0)
[ 280.258] (II) No input driver specified, ignoring this device.
[ 280.258] (II) This device may have been added with another device file.
[ 280.259] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 280.259] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 280.259] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 280.259] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 280.259] (**) AT Translated Set 2 keyboard: always reports core events
[ 280.259] (**) Option "Device" "/dev/input/event3"
[ 280.259] (**) Option "_source" "server/udev"
[ 280.260] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 280.260] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 280.261] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 280.280] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event3"
[ 280.281] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 280.281] (**) Option "xkb_model" "pc105"
[ 280.281] (**) Option "xkb_layout" "in"
[ 280.281] (**) Option "xkb_variant" "eng"
[ 280.281] (**) Option "xkb_options" "grp_led:scroll"
[ 280.284] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 280.284] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 328.227] (II) event2 - Power Button: device removed
[ 328.253] (II) event4 - Video Bus: device removed
[ 328.264] (II) event1 - Power Button: device removed
[ 328.281] (II) event10 - EasyCamera: EasyCamera: device removed
[ 328.325] (II) event5 - Ideapad extra buttons: device removed
[ 328.340] (II) event6 - Elan Touchpad: device removed
[ 328.388] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 328.406] (II) UnloadModule: "libinput"
[ 328.406] (II) UnloadModule: "libinput"
[ 328.406] (II) UnloadModule: "libinput"
[ 328.406] (II) UnloadModule: "libinput"
[ 328.406] (II) UnloadModule: "libinput"
[ 328.406] (II) UnloadModule: "libinput"
[ 328.407] (II) UnloadModule: "libinput"
[ 328.479] (II) Server terminated successfully (0). Closing log file.
~
>How-To-Repeat:
Specific to my hardware. Just boot to NetBSD with HDMI monitor connected. On boot, do startx and examine touchpad.
>Fix:
Not known.
>Audit-Trail:
From: Mayuresh <mayuresh@acm.org>
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: port-amd64/57144: No HDMI output, no touchpad recognized on AMD
Radeon based laptop
Date: Sat, 31 Dec 2022 07:38:53 +0530
--bzdvejfuwolmzzhv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
I tried enabling these kernel options and I do see output on HDMI now.
amdgpu* at pci? dev ? function ?
amdgpufb* at amdgpufbbus?
However there are a few problems
1. Now eDP output (laptop monitor) looks very faint, almost invisible,
immediately after the display mode switch during boot.
2. HDMI screen has a slow refresh issue.
Attaching dmesg, xorg.conf and Xorg.0.log.
EE lines from the log indicate absence of radeonsi_dri.so. Not sure if it
is in pkg. Or does base X11 provide one?
[ 505.533] (EE) AMDGPU(1): [drm] Failed to open DRM device for pci:0000:00:01.1: Operation not supported by device
[ 505.533] (EE) Screen 1 deleted because of no matching config section.
[ 505.775] (EE) AIGLX error: dlopen of /usr/pkg/lib/dri/radeonsi_dri.so failed (Cannot open "/usr/pkg/lib/dri/radeonsi_dri.so")
[ 505.775] (EE) AIGLX error: unable to load driver radeonsi
[ 506.675] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
[ 507.224] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counte
--bzdvejfuwolmzzhv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.lenovo.amdgpu"
etached
[ 580.083016] midi0: detached
[ 580.083016] pchb8: detached
[ 580.083016] pchb7: detached
[ 580.083016] pchb6: detached
[ 580.083016] pchb5: detached
[ 580.083016] pchb4: detached
[ 580.083016] pchb3: detached
[ 580.083016] pchb2: detached
[ 580.083016] pchb1: detached
[ 580.083016] ppb1: detached
[ 580.083016] pchb0: detached
[ 580.083016] dk1 at wd0 (80818f9f-4d94-4ffa-b29a-74c30754a155) deleted
[ 580.083016] dk1: detached
[ 580.083016] dk0 at wd0 (bed6b46c-83bc-4e7f-86ef-dc4aa73b187a) deleted
[ 580.083016] dk0: detached
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020, 2021, 2022
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 10.0_BETA (MYKERNEL) #0: Fri Dec 30 23:04:04 IST 2022
[ 1.000000] root@lenovon:/usr/src/sys/arch/amd64/compile/MYKERNEL
[ 1.000000] total memory = 7647 MB
[ 1.000000] avail memory = 7364 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000004] efi: systbl at pa df4be018
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000DFBFE014 000024 (v02 LENOVO)
[ 1.000004] ACPI: XSDT 0x00000000DFBD9188 0000C4 (v01 LENOVO CB-01 00000001 01000013)
[ 1.000004] ACPI: FACP 0x00000000DFBF9000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: DSDT 0x00000000DFBEB000 008D37 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: FACS 0x00000000DFB85000 000040
[ 1.000004] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: ASF! 0x00000000DFBFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: BOOT 0x00000000DFBFA000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: HPET 0x00000000DFBF8000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: APIC 0x00000000DFBF7000 000090 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: MCFG 0x00000000DFBF6000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SPCR 0x00000000DFBF5000 000050 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: UEFI 0x00000000DFBF4000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBEA000 0006B2 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE5000 004B5B (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: IVRS 0x00000000DFBE4000 0000D0 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: CRAT 0x00000000DFBE3000 0002E8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE2000 000482 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: TPM2 0x00000000DFBE1000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBE0000 000174 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBDE000 0015B7 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: SSDT 0x00000000DFBDC000 00165E (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: FPDT 0x00000000DFBDB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: BGRT 0x00000000DFBDA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 1.000004] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
[ 1.000004] ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 0x21, 32 pins
[ 1.000004] cpu0 at mainbus0 apid 16
[ 1.000004] cpu0: Use mfence to serialize rdtsc
[ 1.000004] cpu0: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G , id 0x670f00
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 17
[ 1.000004] cpu1: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G , id 0x670f00
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <LENOVO,CB-01 ,00000001>, AslId < ,01000013>
[ 1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.045352] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.045352] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.046839] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[ 1.046839] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[ 1.046839] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
[ 1.046839] acpiout0: brightness levels: [2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72,74,76,78,80,82,84,86,88,90,92,94,96,98,100]
[ 1.046839] I2SC at acpivga0 not configured
[ 1.046839] acpivga0: connected output devices:
[ 1.046839] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.046839] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.046839] acpivga0: 0x0200: TV, head 0
[ 1.046839] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.046839] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.046839] RTKC (RTK0000) at acpi0 not configured
[ 1.046839] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.046839] spkr0 at pcppi1: PC Speaker
[ 1.046839] wsbell at spkr0 not configured
[ 1.046839] midi0 at pcppi1: PC speaker
[ 1.046839] sysbeep0 at pcppi1
[ 1.046839] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
[ 1.046839] pckbc1 at acpi0 (KBC0, FUJ7401) (kbd port): io 0x60,0x64 irq 1
[ 1.046839] MEM (PNP0C01) at acpi0 not configured
[ 1.046839] VPC0 (VPC2004) at acpi0 not configured
[ 1.046839] acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery
[ 1.046839] acpibat0: ACPI 4.0 functionality present
[ 1.046839] acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
[ 1.046839] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1.046839] acpilid1 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.046839] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.046839] GPIO (AMD0030) at acpi0 not configured
[ 1.046839] GPS0 (BCM4752) at acpi0 not configured
[ 1.046839] dwiic0 at acpi0 (I2CA, AMD0010-0): mem 0xfedc2000-0xfedc2fff irq 3
[ 1.046839] resource type 0x11 ignored
[ 1.046839] iic0 at dwiic0: I2C bus
[ 1.046839] ihidev0 at iic0 addr 0x15: vendor 0x4f3 product 0x400, TPD1
[ 1.046839] ihidev0: 11 report ids
[ 1.046839] ihidev0: autoconfiguration error: no IRQ resource
[ 1.046839] NFC1 (BCM2F25) at acpi0 not configured
[ 1.046839] acpiwmi0 at acpi0 (WMI4, PNP0C14-WBAT): ACPI WMI Interface
[ 1.046839] acpiwmibus at acpiwmi0 not configured
[ 1.046839] TPM (MSFT0101) at acpi0 not configured
[ 1.046839] attimer1: attached to pcppi1
[ 1.046839] pckbd0 at pckbc1 (kbd slot)
[ 1.046839] pckbc1: using irq 1 for kbd slot
[ 1.046839] wskbd0 at pckbd0: console keyboard
[ 1.046839] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.046839] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.046839] amdsmn0 at pci0 dev 0 function 0: AMD System Management Network
[ 1.046839] amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family15h)
[ 1.046839] AMD 15h/6xh IOMMU (IOMMU system) at pci0 dev 0 function 2 not configured
[ 1.046839] amdgpu0 at pci0 dev 1 function 0: ATI Technologies Radeon R2/R3/R4/R5 Graphics (rev. 0xea)
[ 1.046839] hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
[ 1.046839] hdaudio0: interrupting at msi0 vec 0
[ 1.046839] hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
[ 1.046839] hdafg0 at hdaudio0: ATI R6xx HDMI
[ 1.046839] hdafg0: HDMI00 2ch: Digital Out [Jack]
[ 1.046839] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
[ 1.046839] audio0 at hdafg0: playback
[ 1.046839] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.046839] spkr1 at audio0: PC Speaker (synthesized)
[ 1.046839] wsbell at spkr1 not configured
[ 1.046839] pchb0 at pci0 dev 2 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.046839] ppb0 at pci0 dev 2 function 2: AMD 15h/6xh Root Port (rev. 0x00)
[ 1.046839] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.046839] ppb0: link is x1 @ 2.5GT/s
[ 1.046839] pci1 at ppb0 bus 1
[ 1.046839] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046839] re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x15)
[ 1.046839] re0: interrupting at msix1 vec 0
[ 1.046839] re0: RTL8168H/8111H (0x5400)
[ 1.046839] re0: Ethernet address 9c:5a:44:79:91:8d
[ 1.046839] re0: using 256 tx descriptors
[ 1.046839] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
[ 1.046839] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[ 1.046839] ppb1 at pci0 dev 2 function 4: AMD 15h/6xh Root Port (rev. 0x00)
[ 1.046839] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.046839] ppb1: link is x1 @ 2.5GT/s
[ 1.046839] pci2 at ppb1 bus 2
[ 1.046839] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046839] Realtek Semiconductor RTL8821CE 802.11ac PCIe NIC (miscellaneous network) at pci2 dev 0 function 0 not configured
[ 1.046839] pchb1 at pci0 dev 3 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.046839] AMD 15h/6xh PSP (miscellaneous crypto) at pci0 dev 8 function 0 not configured
[ 1.046839] pchb2 at pci0 dev 9 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
[ 1.046839] hdaudio1 at pci0 dev 9 function 2: HD Audio Controller
[ 1.046839] hdaudio1: interrupting at ioapic1 pin 22
[ 1.046839] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.046839] hdafg1 at hdaudio1: Realtek product 0236
[ 1.046839] hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[ 1.046839] hdafg1: ADC01 2ch: Mic In [Built-In]
[ 1.046839] hdafg1: ADC02 2ch: Mic In [Jack]
[ 1.046839] hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[ 1.046839] audio1 at hdafg1: playback, capture, full duplex, independent
[ 1.046839] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.046839] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.046839] spkr2 at audio1: PC Speaker (synthesized)
[ 1.046839] wsbell at spkr2 not configured
[ 1.046839] xhci0 at pci0 dev 16 function 0: AMD FCH xHCI (rev. 0x20)
[ 1.046839] xhci0: 64-bit DMA
[ 1.046839] xhci0: interrupting at msix2 vec 0
[ 1.046839] xhci0: xHCI version 1.0
[ 1.046839] usb0 at xhci0: USB revision 3.0
[ 1.046839] usb1 at xhci0: USB revision 2.0
[ 1.046839] ahcisata0 at pci0 dev 17 function 0: AMD FCH SATA AHCI (rev. 0x4b)
[ 1.046839] ahcisata0: 64-bit DMA
[ 1.046839] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf733ff01<PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[ 1.046839] ahcisata0: interrupting at ioapic0 pin 19
[ 1.046839] atabus0 at ahcisata0 channel 0
[ 1.046839] atabus1 at ahcisata0 channel 1
[ 1.046839] ehci0 at pci0 dev 18 function 0: AMD FCH EHCI (rev. 0x49)
[ 1.046839] ehci0: 32-bit DMA
[ 1.046839] ehci0: interrupting at ioapic0 pin 18
[ 1.046839] ehci0: BIOS has given up ownership
[ 1.046839] ehci0: EHCI version 1.0
[ 1.046839] ehci0: Using DMA subregion for control data structures
[ 1.046839] usb2 at ehci0: USB revision 2.0
[ 1.046839] piixpm0 at pci0 dev 20 function 0: AMD X370/X399 SMBus Controller (rev. 0x4b)
[ 1.046839] piixpm0: interrupting at SMI,
[ 1.046839] iic1 at piixpm0 port 0: I2C bus
[ 1.046839] iic2 at piixpm0 port 1: I2C bus
[ 1.046839] pcib0 at pci0 dev 20 function 3: AMD FCH LPC (rev. 0x11)
[ 1.046839] pchb3 at pci0 dev 24 function 0: AMD 15h/7xh HyperTransport Configuration (rev. 0x00)
[ 1.046839] pchb4 at pci0 dev 24 function 1: AMD 15h/7xh Address Map Configuration (rev. 0x00)
[ 1.046839] pchb5 at pci0 dev 24 function 2: AMD 15h/7xh DRAM Configuration (rev. 0x00)
[ 1.046839] pchb6 at pci0 dev 24 function 3: AMD 15h/7xh North Bridge Configuration (rev. 0x00)
[ 1.046839] pchb7 at pci0 dev 24 function 4: AMD 15h/7xh CPU C-state Configuration (rev. 0x00)
[ 1.046839] pchb8 at pci0 dev 24 function 5: AMD 15h/7xh Miscellaneous Configuration (rev. 0x00)
[ 1.046839] isa0 at pcib0
[ 1.046839] acpicpu0 at cpu0: ACPI CPU
[ 1.046839] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.046839] acpicpu0: C2: I/O, lat 400 us, pow 0 mW
[ 1.046839] acpicpu0: P0: FFH, lat 4 us, pow 9460 mW, 2600 MHz
[ 1.046839] acpicpu0: P1: FFH, lat 4 us, pow 7380 mW, 2400 MHz
[ 1.046839] acpicpu0: P2: FFH, lat 4 us, pow 5795 mW, 2200 MHz
[ 1.046839] acpicpu0: P3: FFH, lat 4 us, pow 4500 mW, 1900 MHz
[ 1.046839] acpicpu0: P4: FFH, lat 4 us, pow 3217 mW, 1600 MHz
[ 1.046839] acpicpu0: P5: FFH, lat 4 us, pow 2598 mW, 1300 MHz
[ 1.046839] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.046839] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.046839] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.046839] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.046839] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.046839] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.046839] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.046839] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.046839] acpicpu1 at cpu1: ACPI CPU
[ 1.046839] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.046839] timecounter: Timecounter "TSC" frequency 2595125000 Hz quality 3000
[ 1.619508] acpibat0: LENOVO Li-Ion rechargeable battery
[ 1.619508] acpibat0: granularity: low->warn 0.264 Wh, warn->full 3.780 Wh
[ 1.619508] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.628976] uhub0: 4 ports with 4 removable, self powered
[ 1.628976] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.638975] uhub1: 4 ports with 4 removable, self powered
[ 1.638975] acpiacad0: AC adapter online.
[ 1.638975] acpivga0: connected output devices:
[ 1.638975] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.638975] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.638975] acpivga0: 0x0200: TV, head 0
[ 1.638975] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.638975] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.638975] acpivga0: connected output devices:
[ 1.638975] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.638975] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
[ 1.638975] acpivga0: 0x0200: TV, head 0
[ 1.638975] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.638975] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.638975] IPsec: Initialized Security Association Processing.
[ 1.659076] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.659076] uhub2: 2 ports with 2 removable, self powered
[ 1.739075] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 1.739075] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 1.769075] wd0 at atabus0 drive 0
[ 1.769075] wd0: <TOSHIBA MQ04ABF100>
[ 1.769075] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 1.769075] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 1.849075] wd0: GPT GUID: 829ca912-c411-4bf9-820e-b9ecad0d2553
[ 1.849075] dk0 at wd0: "bed6b46c-83bc-4e7f-86ef-dc4aa73b187a", 614400 blocks at 4096, type: msdos
[ 1.849075] dk1 at wd0: "80818f9f-4d94-4ffa-b29a-74c30754a155", 1258291200 blocks at 618496, type: ext2fs
[ 1.849075] dk2 at wd0: "be1e5856-4e07-2044-bf2a-0efd58efdba0", 694615439 blocks at 1258909696, type: ffs
[ 1.858977] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
[ 1.858977] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
[ 1.858977] atapibus0 at atabus1: 1 targets
[ 1.868977] cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GUE0N, KVNJ7GE0413, T.02> cdrom removable
[ 1.879075] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[ 1.879075] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
[ 2.069076] uhub3 at uhub0 port 2: Microchip Tech (0x0424) USB5744 (0x5744), class 9/0, rev 3.10/2.86, addr 1
[ 2.078980] uhub3: 2 ports with 2 removable, self powered
[ 2.129078] uhub4 at uhub1 port 2: Microchip Tech (0x0424) USB2744 (0x2744), class 9/0, rev 2.10/2.86, addr 2
[ 2.129078] uhub4: multiple transaction translators
[ 2.129078] uhub4: 4 ports with 4 removable, self powered
[ 2.649081] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 2.649081] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.658980] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.668979] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 2.709080] uhub5 at uhub2 port 1: vendor 0438 (0x0438) product 7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
[ 2.709080] uhub5: single transaction translator
[ 2.709080] uhub5: 4 ports with 4 removable, self powered
[ 2.889079] uhidev0 at uhub4 port 3 configuration 1 interface 0
[ 2.889079] uhidev0: SIGMACHIP (0x1c4f) USB Keyboard (0x0002), rev 1.10/1.50, addr 3, iclass 3/1
[ 2.889079] ukbd0 at uhidev0
[ 2.899459] wskbd1 at ukbd0 mux 1
[ 2.899459] uhidev1 at uhub4 port 3 configuration 1 interface 1
[ 2.899459] uhidev1: SIGMACHIP (0x1c4f) USB Keyboard (0x0002), rev 1.10/1.50, addr 3, iclass 3/0
[ 2.899459] uhidev1: 2 report ids
[ 2.909357] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
[ 2.909357] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
[ 3.329025] uhidev2 at uhub4 port 4 configuration 1 interface 0
[ 3.329025] uhidev2: PixArt (0x17ef) Lenovo USB Optical Mouse (0x608d), rev 2.00/1.00, addr 4, iclass 3/1
[ 3.329025] ums0 at uhidev2: 3 buttons and Z dir
[ 3.339551] wsmouse0 at ums0 mux 0
[ 3.439081] ubt0 at uhub5 port 2
[ 3.448985] ubt0: Realtek (0x0bda) Bluetooth Radio (0xc024), rev 1.10/1.10, addr 3
[ 3.679082] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 3.679082] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.688985] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.698983] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 3.809084] urtwn0 at uhub1 port 3
[ 3.809084] urtwn0: Realtek (0x0bda) 802.11n NIC (0x8179), rev 2.00/0.00, addr 5
[ 3.958982] uvideo0 at uhub5 port 3 configuration 1 interface 0: Sonix Technology Co., Ltd. (0x174f) EasyCamera (0x241a), rev 2.00/0.13, addr 4
[ 3.968985] video0 at uvideo0: Sonix Technology Co., Ltd. (0x174f) EasyCamera (0x241a), rev 2.00/0.13, addr 4
[ 3.988984] urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address d0:37:45:e7:11:0f
[ 4.000082] urtwn0: 1 rx pipe, 2 tx pipes
[ 4.000082] swwdog0: software watchdog initialized
[ 4.118984] WARNING: 1 error while detecting hardware; check system log.
[ 4.118984] boot device: wd0
[ 4.118984] root on dk2
[ 4.159084] root file system type: ffs
[ 4.169818] kern.module.path=/stand/amd64/10.0/modules
[ 4.169818] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x17AA:0x39F5 0xEA).
[ 4.178988] [drm] register mmio base: 0xF0400000
[ 4.178988] [drm] register mmio size: 262144
[ 4.188984] [drm] PCI I/O BAR is not found.
[ 4.198983] [drm] add ip block number 0 <vi_common>
[ 4.198983] [drm] add ip block number 1 <gmc_v8_0>
[ 4.208983] [drm] add ip block number 2 <cz_ih>
[ 4.208983] [drm] add ip block number 3 <gfx_v8_0>
[ 4.218983] [drm] add ip block number 4 <sdma_v3_0>
[ 4.228984] [drm] add ip block number 5 <powerplay>
[ 4.228984] [drm] add ip block number 6 <dce_v11_0>
[ 4.238983] [drm] add ip block number 7 <uvd_v6_0>
[ 4.248984] [drm] add ip block number 8 <vce_v3_0>
[ 4.248984] [drm] add ip block number 9 <acp_ip>
[ 4.258984] ATOM BIOS: 113-C91400-007
[ 4.268984] [drm] UVD is enabled in physical mode
[ 4.278984] [drm] VCE enabled in VM mode
[ 4.278984] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 4.288984] amdgpu0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 4.298984] amdgpu0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[ 4.308985] [drm] Detected VRAM RAM=512M, BAR=512M
[ 4.308985] [drm] RAM width 64bits UNKNOWN
[ 4.318984] Zone kernel: Available graphics memory: 9007199254088218 KiB
[ 4.328986] Zone dma32: Available graphics memory: 2097152 KiB
[ 4.338984] [drm] amdgpu: 512M of VRAM memory ready
[ 4.338984] [drm] amdgpu: 3072M of GTT memory ready.
[ 4.348985] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.358984] [drm] PCIE GART of 1024M enabled (table at 0x000000F400300000).
[ 4.358984] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.368985] [drm] Driver supports precise vblank timestamp query.
[ 4.379542] amdgpu0: interrupting at msi3 vec 0 (amdgpu0)
[ 4.649087] hwmgr_sw_init smu backed is smu8_smu
[ 4.649087] powerplay sw init successfully
[ 4.658988] [drm] AMDGPU Display Connectors
[ 4.668987] [drm] Connector 0:
[ 4.668987] [drm] eDP-1
[ 4.678986] [drm] HPD1
[ 4.688986] [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[ 4.688986] [drm] Encoders:
[ 4.698986] [drm] LCD1: INTERNAL_UNIPHY
[ 4.708987] [drm] Connector 1:
[ 4.708987] [drm] HDMI-A-1
[ 4.718987] [drm] HPD2
[ 4.718987] [drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[ 4.728987] [drm] Encoders:
[ 4.738987] [drm] DFP1: INTERNAL_UNIPHY
[ 4.738987] [drm] Found UVD firmware Version: 1.43 Family ID: 15
[ 4.748986] [drm] UVD ENC is disabled
[ 4.789087] [drm] Found VCE firmware Version: 34.0 Binary ID: 3
[ 4.798990] smu version 26.17.00
[ 4.858985] [drm] UVD initialized successfully.
[ 4.968986] [drm] VCE initialized successfully.
[ 4.988986] min_core_set_clock not set
[ 4.988986] Setting Deep Sleep Clock: 800
[ 4.998988] enabling ALL SMU features.
[ 5.008987] enable Low Memory PState.
[ 5.008987] min_core_set_clock not set
[ 5.018988] Setting Deep Sleep Clock: 800
[ 5.028988] enable Low Memory PState.
[ 5.658988] amdgpufb0 at amdgpu0
[ 5.668995] min_core_set_clock not set
[ 5.668995] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 5.668995] Setting Deep Sleep Clock: 800
[ 5.668995] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND)enable Low Memory PState.
[ 5.684785] (20221020/psparse-580)
[ 5.684785] [drm] Initialized amdgpu 3.36.0 20150101 for amdgpu0 on minor 0
[ 5.692600] ACPI Error: amdgpufb0: framebuffer at 0x1ff76e000, size 1366x768, depth 32, stride 5632
[ 5.699343] Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 5.699343] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 6.278990] min_core_set_clock not set
[ 6.288993] Setting Deep Sleep Clock: 800
[ 6.288993] enable Low Memory PState.
[ 6.298992] min_core_set_clock not set
[ 6.308994] Setting Deep Sleep Clock: 800
[ 6.308994] enable Low Memory PState.
[ 6.928993] min_core_set_clock not set
[ 6.938993] Setting Deep Sleep Clock: 800
[ 6.938993] enable Low Memory PState.
[ 6.948994] min_core_set_clock not set
[ 6.958993] Setting Deep Sleep Clock: 800
[ 6.958993] enable Low Memory PState.
[ 7.468995] wsdisplay0 at amdgpufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[ 7.598995] wsmux1: connecting to wsdisplay0
[ 7.608997] wskbd1: connecting to wsdisplay0
[ 7.608997] min_core_set_clock not set
[ 7.608997] Setting Deep Sleep Clock: 800
[ 7.608997] enable Low Memory PState.
[ 8.609101] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 8.609101] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 8.609101] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 8.609101] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 9.609004] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 9.609004] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 9.609004] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 9.609004] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 16.629034] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 16.629034] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 16.629034] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 16.639034] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 25.439304] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 25.439304] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 25.439304] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 25.439304] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 26.279221] min_core_set_clock not set
[ 26.279221] Setting Deep Sleep Clock: 800
[ 26.279221] enable Low Memory PState.
[ 26.279221] min_core_set_clock not set
[ 26.279221] Setting Deep Sleep Clock: 800
[ 26.279221] enable Low Memory PState.
[ 32.979481] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 32.979481] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 32.979481] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 32.979481] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 63.360193] wsmouse0: detached
[ 63.360193] ums0: detached
[ 63.360193] uhidev2: detached
[ 63.360193] uhidev2: at uhub4 port 4 (addr 4) disconnected
[ 65.060230] uhidev2 at uhub4 port 4 configuration 1 interface 0
[ 65.060230] uhidev2: PixArt (0x17ef) Lenovo USB Optical Mouse (0x608d), rev 2.00/1.00, addr 4, iclass 3/1
[ 65.060230] ums0 at uhidev2: 3 buttons and Z dir
[ 65.060230] wsmouse0 at ums0 mux 0
[ 68.120199] min_core_set_clock not set
[ 68.120199] Setting Deep Sleep Clock: 800
[ 68.120199] enable Low Memory PState.
[ 68.120199] min_core_set_clock not set
[ 68.120199] Setting Deep Sleep Clock: 800
[ 68.120199] enable Low Memory PState.
[ 68.950219] min_core_set_clock not set
[ 68.950219] Setting Deep Sleep Clock: 800
[ 68.950219] enable Low Memory PState.
[ 68.960218] min_core_set_clock not set
[ 68.960218] Setting Deep Sleep Clock: 800
[ 68.960218] enable Low Memory PState.
[ 73.790434] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 73.790434] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 73.790434] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 73.790434] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 75.910382] min_core_set_clock not set
[ 75.910382] Setting Deep Sleep Clock: 800
[ 75.910382] enable Low Memory PState.
[ 75.910382] min_core_set_clock not set
[ 75.910382] Setting Deep Sleep Clock: 800
[ 75.910382] enable Low Memory PState.
[ 82.510537] min_core_set_clock not set
[ 82.510537] Setting Deep Sleep Clock: 800
[ 82.510537] enable Low Memory PState.
[ 82.520536] min_core_set_clock not set
[ 82.520536] Setting Deep Sleep Clock: 800
[ 82.520536] enable Low Memory PState.
[ 103.881036] min_core_set_clock not set
[ 103.881036] Setting Deep Sleep Clock: 800
[ 103.881036] enable Low Memory PState.
[ 103.891037] min_core_set_clock not set
[ 103.891037] Setting Deep Sleep Clock: 800
[ 103.891037] enable Low Memory PState.
[ 104.001142] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 104.001142] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 104.001142] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 104.001142] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 115.011298] min_core_set_clock not set
[ 115.011298] Setting Deep Sleep Clock: 800
[ 115.011298] enable Low Memory PState.
[ 115.011298] min_core_set_clock not set
[ 115.011298] Setting Deep Sleep Clock: 800
[ 115.011298] enable Low Memory PState.
[ 140.481895] min_core_set_clock not set
[ 140.481895] Setting Deep Sleep Clock: 800
[ 140.481895] enable Low Memory PState.
[ 140.481895] min_core_set_clock not set
[ 140.481895] Setting Deep Sleep Clock: 800
[ 140.481895] enable Low Memory PState.
[ 155.232240] min_core_set_clock not set
[ 155.232240] Setting Deep Sleep Clock: 800
[ 155.232240] enable Low Memory PState.
[ 155.242240] min_core_set_clock not set
[ 155.242240] Setting Deep Sleep Clock: 800
[ 155.242240] enable Low Memory PState.
[ 162.862522] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 162.862522] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 162.862522] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 162.862522] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 167.382627] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 167.382627] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 167.382627] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 167.382627] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 242.974296] min_core_set_clock not set
[ 242.974296] Setting Deep Sleep Clock: 800
[ 242.974296] enable Low Memory PState.
[ 242.984296] min_core_set_clock not set
[ 242.984296] Setting Deep Sleep Clock: 800
[ 242.984296] enable Low Memory PState.
[ 263.644781] min_core_set_clock not set
[ 263.644781] Setting Deep Sleep Clock: 800
[ 263.644781] enable Low Memory PState.
[ 263.654781] min_core_set_clock not set
[ 263.654781] Setting Deep Sleep Clock: 800
[ 263.654781] enable Low Memory PState.
[ 263.764784] min_core_set_clock not set
[ 263.764784] Setting Deep Sleep Clock: 800
[ 263.764784] enable Low Memory PState.
[ 263.774784] min_core_set_clock not set
[ 263.774784] Setting Deep Sleep Clock: 800
[ 263.774784] enable Low Memory PState.
[ 281.375197] min_core_set_clock not set
[ 281.375197] Setting Deep Sleep Clock: 800
[ 281.375197] enable Low Memory PState.
[ 281.375197] min_core_set_clock not set
[ 281.375197] Setting Deep Sleep Clock: 800
[ 281.375197] enable Low Memory PState.
[ 281.495199] min_core_set_clock not set
[ 281.495199] Setting Deep Sleep Clock: 800
[ 281.495199] enable Low Memory PState.
[ 281.495199] min_core_set_clock not set
[ 281.505199] Setting Deep Sleep Clock: 800
[ 281.505199] enable Low Memory PState.
[ 325.646233] min_core_set_clock not set
[ 325.656233] Setting Deep Sleep Clock: 800
[ 325.656233] enable Low Memory PState.
[ 325.656233] min_core_set_clock not set
[ 325.656233] Setting Deep Sleep Clock: 800
[ 325.656233] enable Low Memory PState.
[ 385.237629] min_core_set_clock not set
[ 385.237629] Setting Deep Sleep Clock: 800
[ 385.237629] enable Low Memory PState.
[ 385.247628] min_core_set_clock not set
[ 385.247628] Setting Deep Sleep Clock: 800
[ 385.247628] enable Low Memory PState.
[ 399.257957] min_core_set_clock not set
[ 399.267957] Setting Deep Sleep Clock: 800
[ 399.267957] enable Low Memory PState.
[ 399.267957] min_core_set_clock not set
[ 399.267957] Setting Deep Sleep Clock: 800
[ 399.267957] enable Low Memory PState.
[ 399.417961] min_core_set_clock not set
[ 399.417961] Setting Deep Sleep Clock: 800
[ 399.417961] enable Low Memory PState.
[ 399.417961] min_core_set_clock not set
[ 399.427961] Setting Deep Sleep Clock: 800
[ 399.427961] enable Low Memory PState.
[ 439.288895] min_core_set_clock not set
[ 439.288895] Setting Deep Sleep Clock: 800
[ 439.288895] enable Low Memory PState.
[ 439.299007] min_core_set_clock not set
[ 439.299007] Setting Deep Sleep Clock: 800
[ 439.299007] enable Low Memory PState.
[ 439.388898] min_core_set_clock not set
[ 439.388898] Setting Deep Sleep Clock: 800
[ 439.388898] enable Low Memory PState.
[ 439.908909] min_core_set_clock not set
[ 439.908909] Setting Deep Sleep Clock: 800
[ 439.908909] enable Low Memory PState.
[ 439.948911] min_core_set_clock not set
[ 439.948911] Setting Deep Sleep Clock: 800
[ 439.948911] enable Low Memory PState.
[ 439.948911] min_core_set_clock not set
[ 439.948911] Setting Deep Sleep Clock: 800
[ 439.948911] enable Low Memory PState.
[ 439.948911] min_core_set_clock not set
[ 439.948911] Setting Deep Sleep Clock: 800
[ 439.948911] enable Low Memory PState.
[ 439.948911] min_core_set_clock not set
[ 439.948911] Setting Deep Sleep Clock: 800
[ 439.948911] enable Low Memory PState.
[ 440.638929] min_core_set_clock not set
[ 440.638929] Setting Deep Sleep Clock: 800
[ 440.638929] enable Low Memory PState.
[ 440.638929] min_core_set_clock not set
[ 440.648930] Setting Deep Sleep Clock: 800
[ 440.648930] enable Low Memory PState.
[ 440.648930] min_core_set_clock not set
[ 440.648930] Setting Deep Sleep Clock: 800
[ 440.648930] enable Low Memory PState.
[ 440.648930] min_core_set_clock not set
[ 440.648930] Setting Deep Sleep Clock: 800
[ 440.648930] enable Low Memory PState.
[ 440.648930] min_core_set_clock not set
[ 440.648930] Setting Deep Sleep Clock: 800
[ 440.648930] enable Low Memory PState.
[ 440.758929] min_core_set_clock not set
[ 440.758929] Setting Deep Sleep Clock: 800
[ 440.758929] enable Low Memory PState.
[ 440.758929] min_core_set_clock not set
[ 440.758929] Setting Deep Sleep Clock: 800
[ 440.758929] enable Low Memory PState.
[ 441.388944] min_core_set_clock not set
[ 441.388944] Setting Deep Sleep Clock: 800
[ 441.388944] enable Low Memory PState.
[ 441.428945] min_core_set_clock not set
[ 441.428945] Setting Deep Sleep Clock: 800
[ 441.428945] enable Low Memory PState.
[ 441.428945] min_core_set_clock not set
[ 441.428945] Setting Deep Sleep Clock: 800
[ 441.428945] enable Low Memory PState.
[ 450.539263] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 450.539263] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 450.539263] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 450.539263] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 452.049297] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 452.049297] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 452.049297] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 452.049297] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 471.809658] min_core_set_clock not set
[ 471.819658] Setting Deep Sleep Clock: 800
[ 471.819658] enable Low Memory PState.
[ 471.819658] min_core_set_clock not set
[ 471.819658] Setting Deep Sleep Clock: 800
[ 471.819658] enable Low Memory PState.
[ 471.919661] min_core_set_clock not set
[ 471.919661] Setting Deep Sleep Clock: 800
[ 471.919661] enable Low Memory PState.
[ 472.439672] min_core_set_clock not set
[ 472.439672] Setting Deep Sleep Clock: 800
[ 472.439672] enable Low Memory PState.
[ 472.469673] min_core_set_clock not set
[ 472.469673] Setting Deep Sleep Clock: 800
[ 472.469673] enable Low Memory PState.
[ 472.469673] min_core_set_clock not set
[ 472.469673] Setting Deep Sleep Clock: 800
[ 472.469673] enable Low Memory PState.
[ 472.469673] min_core_set_clock not set
[ 472.469673] Setting Deep Sleep Clock: 800
[ 472.469673] enable Low Memory PState.
[ 472.469673] min_core_set_clock not set
[ 472.469673] Setting Deep Sleep Clock: 800
[ 472.469673] enable Low Memory PState.
[ 473.139692] min_core_set_clock not set
[ 473.139692] Setting Deep Sleep Clock: 800
[ 473.139692] enable Low Memory PState.
[ 473.139692] min_core_set_clock not set
[ 473.139692] Setting Deep Sleep Clock: 800
[ 473.139692] enable Low Memory PState.
[ 473.139692] min_core_set_clock not set
[ 473.139692] Setting Deep Sleep Clock: 800
[ 473.139692] enable Low Memory PState.
[ 473.139692] min_core_set_clock not set
[ 473.139692] Setting Deep Sleep Clock: 800
[ 473.139692] enable Low Memory PState.
[ 473.139692] min_core_set_clock not set
[ 473.149690] Setting Deep Sleep Clock: 800
[ 473.149690] enable Low Memory PState.
[ 480.559862] min_core_set_clock not set
[ 480.559862] Setting Deep Sleep Clock: 800
[ 480.559862] enable Low Memory PState.
[ 480.559862] min_core_set_clock not set
[ 480.559862] Setting Deep Sleep Clock: 800
[ 480.559862] enable Low Memory PState.
[ 481.189877] min_core_set_clock not set
[ 481.189877] Setting Deep Sleep Clock: 800
[ 481.189877] enable Low Memory PState.
[ 481.219878] min_core_set_clock not set
[ 481.219878] Setting Deep Sleep Clock: 800
[ 481.219878] enable Low Memory PState.
[ 481.229878] min_core_set_clock not set
[ 481.229878] Setting Deep Sleep Clock: 800
[ 481.229878] enable Low Memory PState.
[ 482.340008] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 482.340008] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 482.340008] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 482.340008] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 494.190285] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 494.190285] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 494.190285] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 494.190285] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 506.510471] min_core_set_clock not set
[ 506.510471] Setting Deep Sleep Clock: 800
[ 506.510471] enable Low Memory PState.
[ 506.520471] min_core_set_clock not set
[ 506.520471] Setting Deep Sleep Clock: 800
[ 506.520471] enable Low Memory PState.
[ 506.670475] min_core_set_clock not set
[ 506.670475] Setting Deep Sleep Clock: 800
[ 506.670475] enable Low Memory PState.
[ 507.180486] min_core_set_clock not set
[ 507.180486] Setting Deep Sleep Clock: 800
[ 507.180486] enable Low Memory PState.
[ 507.220487] min_core_set_clock not set
[ 507.220487] Setting Deep Sleep Clock: 800
[ 507.220487] enable Low Memory PState.
[ 507.220487] min_core_set_clock not set
[ 507.220487] Setting Deep Sleep Clock: 800
[ 507.220487] enable Low Memory PState.
[ 507.220487] min_core_set_clock not set
[ 507.220487] Setting Deep Sleep Clock: 800
[ 507.220487] enable Low Memory PState.
[ 507.220487] min_core_set_clock not set
[ 507.220487] Setting Deep Sleep Clock: 800
[ 507.220487] enable Low Memory PState.
[ 507.870504] min_core_set_clock not set
[ 507.870504] Setting Deep Sleep Clock: 800
[ 507.870504] enable Low Memory PState.
[ 507.870504] min_core_set_clock not set
[ 507.870504] Setting Deep Sleep Clock: 800
[ 507.870504] enable Low Memory PState.
[ 507.870504] min_core_set_clock not set
[ 507.870504] Setting Deep Sleep Clock: 800
[ 507.870504] enable Low Memory PState.
[ 507.870504] min_core_set_clock not set
[ 507.870504] Setting Deep Sleep Clock: 800
[ 507.870504] enable Low Memory PState.
[ 507.870504] min_core_set_clock not set
[ 507.880504] Setting Deep Sleep Clock: 800
[ 507.880504] enable Low Memory PState.
[ 516.770814] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 516.770814] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 516.770814] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 516.770814] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 522.790854] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 522.790854] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 522.790854] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 522.790854] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 524.290991] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 524.290991] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 524.290991] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 524.290991] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 531.821064] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 531.821064] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 531.821064] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 531.821064] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 533.321098] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 533.321098] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 533.321098] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 533.321098] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 552.891656] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 552.891656] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 552.891656] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 552.891656] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 564.961834] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 564.961834] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 564.961834] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 564.961834] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 572.492012] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 572.492012] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 572.492012] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 572.492012] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 584.552294] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 584.552294] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 584.552294] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 584.552294] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 593.612507] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 593.612507] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 593.612507] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 593.612507] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 595.132540] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 595.132540] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 595.132540] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 595.132540] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 605.692890] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 605.692890] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 605.692890] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 605.692890] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 611.733032] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 611.733032] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 611.733032] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 611.733032] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 620.783244] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 620.783244] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 620.783244] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 620.783244] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 628.343320] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 628.343320] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 628.343320] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 628.343320] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 646.473745] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 646.473745] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 646.473745] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 646.473745] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 658.564129] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 658.564129] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 658.564129] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 658.564129] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 666.114306] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 666.114306] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 666.114306] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 666.114306] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 673.674382] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 673.674382] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 673.674382] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 673.674382] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 679.714625] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 679.714625] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 679.714625] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 679.714625] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 726.535621] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 726.535621] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 726.535621] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 726.535621] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 740.116041] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 740.116041] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 740.116041] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 740.116041] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 768.796714] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 768.796714] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 768.796714] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 768.796714] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 792.937278] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 792.937278] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 792.937278] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 792.937278] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 815.597708] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 815.597708] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 815.597708] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 815.597708] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 838.238340] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 838.238340] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 838.238340] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 838.238340] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 842.768447] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 842.768447] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 842.768447] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 842.768447] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 863.918943] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 863.918943] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 863.918943] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 863.918943] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 909.189902] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 909.189902] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 909.189902] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 909.189902] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 943.900717] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 943.900717] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 943.900717] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 943.900717] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 948.430923] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 948.430923] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 948.430923] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 948.430923] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 957.481135] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 957.481135] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 957.481135] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 957.481135] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 986.191808] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 986.191808] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 986.191808] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 986.191808] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 995.262021] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 995.262021] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 995.262021] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 995.262021] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1076.763830] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1076.763830] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1076.763830] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1076.763830] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1102.424532] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1102.424532] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1102.424532] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1102.424532] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1122.064992] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1122.064992] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1122.064992] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1122.064992] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1134.145274] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1134.145274] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1134.145274] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1134.145274] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1155.275771] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1155.275771] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1155.275771] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1155.275771] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1161.305911] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1161.305911] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1161.305911] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1161.305911] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1176.406163] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1176.406163] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1176.406163] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1176.406163] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1218.707257] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1218.707257] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1218.707257] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1218.707257] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1227.777369] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1227.777369] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1227.777369] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1227.777369] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1236.847682] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1236.847682] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1236.847682] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1236.847682] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1348.630302] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
[ 1348.630302] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1348.630302] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
[ 1348.630302] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
--bzdvejfuwolmzzhv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="xorg.conf.lenovo.amdgpu"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/pkg/lib/xorg/modules"
FontPath "/usr/pkg/share/fonts/X11/misc"
FontPath "/usr/pkg/share/fonts/X11/TTF"
FontPath "/usr/pkg/share/fonts/X11/OTF"
FontPath "/usr/pkg/share/fonts/X11/Type1"
FontPath "/usr/pkg/share/fonts/X11/100dpi"
FontPath "/usr/pkg/share/fonts/X11/75dpi"
FontPath "/usr/pkg/share/fonts/X11/cyrillic"
FontPath "/usr/pkg/lib/X11/fonts/misc"
FontPath "/usr/pkg/lib/X11/fonts/TTF"
FontPath "/usr/pkg/lib/X11/fonts/OTF"
FontPath "/usr/pkg/lib/X11/fonts/Type1"
FontPath "/usr/pkg/lib/X11/fonts/100dpi"
FontPath "/usr/pkg/lib/X11/fonts/75dpi"
FontPath "/usr/pkg/lib/X11/fonts/cyrillic"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ZaphodHeads" # <str>
#Option "AccelMethod" # <str>
#Option "DRI3" # [<bool>]
#Option "DRI" #
#Option "ShadowPrimary" # [<bool>]
#Option "TearFree" # [<bool>]
#Option "DeleteUnusedDP12Displays" # [<bool>]
#Option "VariableRefresh" # [<bool>]
#Option "AsyncFlipSecondaries" # [<bool>]
Identifier "Card0"
Driver "amdgpu"
BusID "PCI:0:1:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ZaphodHeads" # <str>
#Option "AccelMethod" # <str>
#Option "DRI3" # [<bool>]
#Option "DRI" #
#Option "ShadowPrimary" # [<bool>]
#Option "TearFree" # [<bool>]
#Option "DeleteUnusedDP12Displays" # [<bool>]
#Option "VariableRefresh" # [<bool>]
#Option "AsyncFlipSecondaries" # [<bool>]
Identifier "Card1"
Driver "amdgpu"
BusID "PCI:0:1:1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
--bzdvejfuwolmzzhv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="Xorg.0.log.lenovo.amdgpu"
[ 505.495]
X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
[ 505.495] Current Operating System: NetBSD lenovon 10.0_BETA NetBSD 10.0_BETA (MYKERNEL) #0: Fri Dec 30 23:04:04 IST 2022 root@lenovon:/usr/src/sys/arch/amd64/compile/MYKERNEL amd64
[ 505.496]
[ 505.496] Current version of pixman: 0.42.2
[ 505.496] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 505.496] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 505.496] (==) Log file: "/usr/pkg/var/log/Xorg.0.log", Time: Fri Dec 30 23:42:34 2022
[ 505.496] (==) Using config file: "/usr/pkg/etc/X11/xorg.conf"
[ 505.496] (==) Using system config directory "/usr/pkg/share/X11/xorg.conf.d"
[ 505.496] (==) ServerLayout "X.org Configured"
[ 505.496] (**) |-->Screen "Screen0" (0)
[ 505.496] (**) | |-->Monitor "Monitor0"
[ 505.497] (**) | |-->Device "Card0"
[ 505.497] (**) |-->Screen "Screen1" (1)
[ 505.497] (**) | |-->Monitor "Monitor1"
[ 505.497] (**) | |-->Device "Card1"
[ 505.497] (**) |-->Input Device "Mouse0"
[ 505.497] (**) |-->Input Device "Keyboard0"
[ 505.497] (==) Not automatically adding devices
[ 505.497] (==) Not automatically enabling devices
[ 505.497] (==) Not automatically adding GPU devices
[ 505.497] (==) Automatically binding GPU devices
[ 505.497] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 505.497] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) `fonts.dir' not found (or not valid) in "/usr/pkg/share/fonts/X11/cyrillic".
[ 505.497] Entry deleted from font path.
[ 505.497] (Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) `fonts.dir' not found (or not valid) in "/usr/pkg/share/fonts/X11/cyrillic".
[ 505.497] Entry deleted from font path.
[ 505.497] (Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does not exist.
[ 505.497] Entry deleted from font path.
[ 505.497] (**) FontPath set to:
/usr/pkg/share/fonts/X11/misc,
/usr/pkg/share/fonts/X11/TTF,
/usr/pkg/share/fonts/X11/Type1,
/usr/pkg/share/fonts/X11/100dpi,
/usr/pkg/share/fonts/X11/75dpi,
/usr/pkg/share/fonts/X11/misc,
/usr/pkg/share/fonts/X11/TTF,
/usr/pkg/share/fonts/X11/Type1,
/usr/pkg/share/fonts/X11/100dpi,
/usr/pkg/share/fonts/X11/75dpi
[ 505.497] (**) ModulePath set to "/usr/pkg/lib/xorg/modules"
[ 505.497] (II) Loader magic: 0x1b842dc40
[ 505.497] (II) Module ABI versions:
[ 505.498] X.Org ANSI C Emulation: 0.4
[ 505.498] X.Org Video Driver: 25.2
[ 505.498] X.Org XInput driver : 24.4
[ 505.498] X.Org Server Extension : 10.0
[ 505.500] (--) PCI:*(0@0:1:0) 1002:98e4:17aa:39f5 rev 234, Mem @ 0xe0000000/268435456, 0xf0800000/8388608, 0xf0400000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 505.500] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 505.500] (II) LoadModule: "glx"
[ 505.501] (II) Loading /usr/pkg/lib/xorg/modules/extensions/libglx.so
[ 505.523] (II) Module glx: vendor="X.Org Foundation"
[ 505.523] compiled for 1.21.1.6, module version = 1.0.0
[ 505.523] ABI class: X.Org Server Extension, version 10.0
[ 505.523] (II) LoadModule: "amdgpu"
[ 505.523] (II) Loading /usr/pkg/lib/xorg/modules/drivers/amdgpu_drv.so
[ 505.524] (II) Module amdgpu: vendor="X.Org Foundation"
[ 505.524] compiled for 1.21.1.6, module version = 22.0.0
[ 505.524] Module class: X.Org Video Driver
[ 505.524] ABI class: X.Org Video Driver, version 25.2
[ 505.524] (II) LoadModule: "mouse"
[ 505.524] (II) Loading /usr/pkg/lib/xorg/modules/input/mouse_drv.so
[ 505.524] (II) Module mouse: vendor="X.Org Foundation"
[ 505.524] compiled for 1.21.1.4, module version = 1.9.4
[ 505.524] Module class: X.Org XInput Driver
[ 505.524] ABI class: X.Org XInput driver, version 24.4
[ 505.524] (II) LoadModule: "kbd"
[ 505.525] (II) Loading /usr/pkg/lib/xorg/modules/input/kbd_drv.so
[ 505.525] (II) Module kbd: vendor="X.Org Foundation"
[ 505.525] compiled for 1.21.1.4, module version = 2.0.0
[ 505.525] Module class: X.Org XInput Driver
[ 505.525] ABI class: X.Org XInput driver, version 24.4
[ 505.525] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 505.525] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 505.531] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 505.533] (II) AMDGPU(1): [KMS] Kernel modesetting enabled.
[ 505.533] (EE) AMDGPU(1): [drm] Failed to open DRM device for pci:0000:00:01.1: Operation not supported by device
[ 505.533] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 505.533] (EE) Screen 1 deleted because of no matching config section.
[ 505.533] (II) UnloadModule: "amdgpu"
[ 505.533] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 505.533] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 505.533] (==) AMDGPU(0): Default visual is TrueColor
[ 505.533] (==) AMDGPU(0): RGB weight 888
[ 505.533] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 505.533] (--) AMDGPU(0): Chipset: "AMD Radeon R4 Graphics" (ChipID = 0x98e4)
[ 505.533] (II) Loading sub module "fb"
[ 505.533] (II) LoadModule: "fb"
[ 505.533] (II) Module "fb" already built-in
[ 505.533] (II) Loading sub module "dri2"
[ 505.533] (II) LoadModule: "dri2"
[ 505.533] (II) Module "dri2" already built-in
[ 505.544] (II) Loading sub module "glamoregl"
[ 505.544] (II) LoadModule: "glamoregl"
[ 505.544] (II) Loading /usr/pkg/lib/xorg/modules/libglamoregl.so
[ 505.595] (II) Module glamoregl: vendor="X.Org Foundation"
[ 505.595] compiled for 1.21.1.6, module version = 1.0.1
[ 505.595] ABI class: X.Org ANSI C Emulation, version 0.4
[ 505.643] (II) AMDGPU(0): glamor X acceleration enabled on softpipe
[ 505.643] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 505.643] (==) AMDGPU(0): TearFree property default: auto
[ 505.643] (==) AMDGPU(0): VariableRefresh: disabled
[ 505.643] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[ 505.643] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 505.648] (II) AMDGPU(0): Output eDP using monitor section Monitor0
[ 505.687] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 505.692] (II) AMDGPU(0): EDID for output eDP
[ 505.692] (II) AMDGPU(0): Manufacturer: AUO Model: 71ec Serial#: 0
[ 505.692] (II) AMDGPU(0): Year: 2015 Week: 24
[ 505.692] (II) AMDGPU(0): EDID Version: 1.4
[ 505.692] (II) AMDGPU(0): Digital Display Input
[ 505.692] (II) AMDGPU(0): 6 bits per channel
[ 505.692] (II) AMDGPU(0): Digital interface is DisplayPort
[ 505.692] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 505.692] (II) AMDGPU(0): Gamma: 2.20
[ 505.692] (II) AMDGPU(0): No DPMS capabilities specified
[ 505.692] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 505.692] (II) AMDGPU(0): First detailed timing is preferred mode
[ 505.692] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 505.692] (II) AMDGPU(0): redX: 0.575 redY: 0.345 greenX: 0.340 greenY: 0.570
[ 505.692] (II) AMDGPU(0): blueX: 0.160 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 505.692] (II) AMDGPU(0): Manufacturer's mask: 0
[ 505.692] (II) AMDGPU(0): Supported detailed timing:
[ 505.692] (II) AMDGPU(0): clock: 76.3 MHz Image Size: 344 x 193 mm
[ 505.692] (II) AMDGPU(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1558 h_border: 0
[ 505.692] (II) AMDGPU(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 816 v_border: 0
[ 505.692] (II) AMDGPU(0): Unknown vendor-specific block f
[ 505.692] (II) AMDGPU(0): AUO
[ 505.692] (II) AMDGPU(0): B156XTN07.1
[ 505.692] (II) AMDGPU(0): EDID (in hex):
[ 505.692] (II) AMDGPU(0): 00ffffffffffff0006afec7100000000
[ 505.692] (II) AMDGPU(0): 18190104952213780250259358579229
[ 505.692] (II) AMDGPU(0): 22505400000001010101010101010101
[ 505.692] (II) AMDGPU(0): 010101010101ce1d56c050003030080a
[ 505.692] (II) AMDGPU(0): 310058c1100000180000000f00000000
[ 505.692] (II) AMDGPU(0): 00000000000000000020000000fe0041
[ 505.692] (II) AMDGPU(0): 554f0a202020202020202020000000fe
[ 505.692] (II) AMDGPU(0): 004231353658544e30372e31200a00fb
[ 505.692] (II) AMDGPU(0): Printing probed modes for output eDP
[ 505.692] (II) AMDGPU(0): Modeline "1366x768"x60.0 76.30 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz eP)
[ 505.692] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.65 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.9 kHz)
[ 505.692] (II) AMDGPU(0): Modeline "1152x768"x59.9 71.95 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.8 kHz)
[ 505.692] (II) AMDGPU(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 505.692] (II) AMDGPU(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 505.692] (II) AMDGPU(0): Modeline "848x480"x59.9 31.65 848 872 952 1056 480 483 493 500 -hsync +vsync (30.0 kHz)
[ 505.692] (II) AMDGPU(0): Modeline "720x480"x59.9 26.85 720 744 808 896 480 483 493 500 -hsync +vsync (30.0 kHz)
[ 505.692] (II) AMDGPU(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz)
[ 505.731] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 505.731] (II) AMDGPU(0): Manufacturer: DEL Model: a0dc Serial#: 860566338
[ 505.731] (II) AMDGPU(0): Year: 2018 Week: 12
[ 505.731] (II) AMDGPU(0): EDID Version: 1.3
[ 505.731] (II) AMDGPU(0): Digital Display Input
[ 505.731] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 505.731] (II) AMDGPU(0): Gamma: 2.20
[ 505.731] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off
[ 505.731] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 505.732] (II) AMDGPU(0): First detailed timing is preferred mode
[ 505.732] (II) AMDGPU(0): redX: 0.652 redY: 0.336 greenX: 0.321 greenY: 0.610
[ 505.732] (II) AMDGPU(0): blueX: 0.153 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 505.732] (II) AMDGPU(0): Supported established timings:
[ 505.732] (II) AMDGPU(0): 720x400@70Hz
[ 505.732] (II) AMDGPU(0): 640x480@60Hz
[ 505.732] (II) AMDGPU(0): 640x480@75Hz
[ 505.732] (II) AMDGPU(0): 800x600@60Hz
[ 505.732] (II) AMDGPU(0): 800x600@75Hz
[ 505.732] (II) AMDGPU(0): 1024x768@60Hz
[ 505.732] (II) AMDGPU(0): 1024x768@75Hz
[ 505.732] (II) AMDGPU(0): 1280x1024@75Hz
[ 505.732] (II) AMDGPU(0): Manufacturer's mask: 0
[ 505.732] (II) AMDGPU(0): Supported standard timings:
[ 505.732] (II) AMDGPU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 505.732] (II) AMDGPU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 505.732] (II) AMDGPU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 505.732] (II) AMDGPU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 505.732] (II) AMDGPU(0): Supported detailed timing:
[ 505.732] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 527 x 296 mm
[ 505.732] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 505.732] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 505.732] (II) AMDGPU(0): Serial No: 9PYW683L3K3B
[ 505.732] (II) AMDGPU(0): Monitor name: DELL P2417H
[ 505.732] (II) AMDGPU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 505.732] (II) AMDGPU(0): Supported detailed timing:
[ 505.732] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 527 x 296 mm
[ 505.732] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 505.732] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 505.732] (II) AMDGPU(0): Supported detailed timing:
[ 505.732] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 527 x 296 mm
[ 505.732] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 505.732] (II) AMDGPU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 505.732] (II) AMDGPU(0): Supported detailed timing:
[ 505.732] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 527 x 296 mm
[ 505.732] (II) AMDGPU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 505.732] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 505.732] (II) AMDGPU(0): Supported detailed timing:
[ 505.732] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 527 x 296 mm
[ 505.732] (II) AMDGPU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 505.732] (II) AMDGPU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 505.732] (II) AMDGPU(0): Number of EDID sections to follow: 1
[ 505.732] (II) AMDGPU(0): EDID (in hex):
[ 505.732] (II) AMDGPU(0): 00ffffffffffff0010acdca042334b33
[ 505.732] (II) AMDGPU(0): 0c1c010380351e78ea0565a756529c27
[ 505.732] (II) AMDGPU(0): 0f5054a54b00714f8180a9c0d1c00101
[ 505.732] (II) AMDGPU(0): 010101010101023a801871382d40582c
[ 505.732] (II) AMDGPU(0): 45000f282100001e000000ff00395059
[ 505.732] (II) AMDGPU(0): 573638334c334b33420a000000fc0044
[ 505.732] (II) AMDGPU(0): 454c4c205032343137480a20000000fd
[ 505.732] (II) AMDGPU(0): 00384c1e5311000a20202020202001b2
[ 505.732] (II) AMDGPU(0): 020317b14c9005040302071601141f12
[ 505.732] (II) AMDGPU(0): 1365030c001000023a801871382d4058
[ 505.732] (II) AMDGPU(0): 2c45000f282100001e011d8018711c16
[ 505.732] (II) AMDGPU(0): 20582c25000f282100009e011d007251
[ 505.732] (II) AMDGPU(0): d01e206e2855000f282100001e8c0ad0
[ 505.732] (II) AMDGPU(0): 8a20e02d10103e96000f282100001800
[ 505.732] (II) AMDGPU(0): 00000000000000000000000000000000
[ 505.732] (II) AMDGPU(0): 0000000000000000000000000000003d
[ 505.732] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0
[ 505.732] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 505.732] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 505.732] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 505.733] (II) AMDGPU(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 505.733] (II) AMDGPU(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 505.733] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 505.733] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 505.733] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 505.733] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 505.733] (II) AMDGPU(0): Output eDP connected
[ 505.733] (II) AMDGPU(0): Output HDMI-A-0 connected
[ 505.733] (II) AMDGPU(0): Using spanning desktop for initial modes
[ 505.733] (II) AMDGPU(0): Output eDP using initial mode 1366x768 +0+0
[ 505.733] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1920x1080 +1366+0
[ 505.733] (II) AMDGPU(0): mem size init: gart size :bfd7a000 vram size: s:1f362000 visible:1f362000
[ 505.733] (==) AMDGPU(0): DPI set to (96, 96)
[ 505.733] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 505.733] (II) Loading sub module "ramdac"
[ 505.733] (II) LoadModule: "ramdac"
[ 505.733] (II) Module "ramdac" already built-in
[ 505.733] (II) AMDGPU(0): [DRI2] Setup complete
[ 505.733] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 505.733] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 505.733] (II) AMDGPU(0): Front buffer pitch: 13312 bytes
[ 505.733] (II) AMDGPU(0): SYNC extension fences enabled
[ 505.733] (II) AMDGPU(0): Present extension enabled
[ 505.733] (==) AMDGPU(0): DRI3 enabled
[ 505.733] (==) AMDGPU(0): Backing store enabled
[ 505.733] (II) AMDGPU(0): Direct rendering enabled
[ 505.774] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 505.774] (II) AMDGPU(0): Acceleration enabled
[ 505.774] (==) AMDGPU(0): DPMS enabled
[ 505.774] (==) AMDGPU(0): Silken mouse enabled
[ 505.774] (II) AMDGPU(0): Set up textured video (glamor)
[ 505.774] (II) Initializing extension Generic Event Extension
[ 505.774] (II) Initializing extension SHAPE
[ 505.774] (II) Initializing extension MIT-SHM
[ 505.775] (II) Initializing extension XInputExtension
[ 505.775] (II) Initializing extension XTEST
[ 505.775] (II) Initializing extension BIG-REQUESTS
[ 505.775] (II) Initializing extension SYNC
[ 505.775] (II) Initializing extension XKEYBOARD
[ 505.775] (II) Initializing extension XC-MISC
[ 505.775] (II) Initializing extension XFIXES
[ 505.775] (II) Initializing extension RENDER
[ 505.775] (II) Initializing extension RANDR
[ 505.775] (II) Initializing extension COMPOSITE
[ 505.775] (II) Initializing extension DAMAGE
[ 505.775] (II) Initializing extension MIT-SCREEN-SAVER
[ 505.775] (II) Initializing extension DOUBLE-BUFFER
[ 505.775] (II) Initializing extension RECORD
[ 505.775] (II) Initializing extension DPMS
[ 505.775] (II) Initializing extension Present
[ 505.775] (II) Initializing extension DRI3
[ 505.775] (II) Initializing extension X-Resource
[ 505.775] (II) Initializing extension XVideo
[ 505.775] (II) Initializing extension XVideo-MotionCompensation
[ 505.775] (II) Initializing extension GLX
[ 505.775] (EE) AIGLX error: dlopen of /usr/pkg/lib/dri/radeonsi_dri.so failed (Cannot open "/usr/pkg/lib/dri/radeonsi_dri.so")
[ 505.775] (EE) AIGLX error: unable to load driver radeonsi
[ 505.780] (II) IGLX: Loaded and initialized swrast
[ 505.780] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 505.780] (II) Initializing extension XFree86-VidModeExtension
[ 505.780] (II) Initializing extension XFree86-DGA
[ 505.780] (II) Initializing extension XFree86-DRI
[ 505.780] (II) Initializing extension DRI2
[ 505.780] (II) AMDGPU(0): Setting screen physical size to 869 x 285
[ 506.564] (II) Using input driver 'mouse' for 'Mouse0'
[ 506.564] (**) Option "CorePointer"
[ 506.564] (**) Mouse0: always reports core events
[ 506.565] (**) Option "Protocol" "wsmouse"
[ 506.565] (**) Option "Device" "/dev/wsmouse"
[ 506.565] (**) Mouse0: Protocol: "wsmouse"
[ 506.565] (**) Mouse0: always reports core events
[ 506.571] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 506.571] (**) Option "ZAxisMapping" "4 5 6 7"
[ 506.571] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 506.571] (**) Mouse0: Buttons: 11
[ 506.571] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[ 506.571] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 506.571] (**) Mouse0: (accel) acceleration profile 0
[ 506.571] (**) Mouse0: (accel) acceleration factor: 2.000
[ 506.571] (**) Mouse0: (accel) acceleration threshold: 4
[ 506.574] (II) Using input driver 'kbd' for 'Keyboard0'
[ 506.574] (**) Option "CoreKeyboard"
[ 506.574] (**) Keyboard0: always reports core events
[ 506.574] (**) Keyboard0: always reports core events
[ 506.574] (**) Option "Protocol" "standard"
[ 506.574] (**) Option "XkbRules" "base"
[ 506.574] (**) Option "XkbModel" "pc105"
[ 506.574] (**) Option "XkbLayout" "us"
[ 506.574] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
[ 506.598] (II) AMDGPU(0): EDID vendor "AUO", prod id 29164
[ 506.598] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 506.598] (II) AMDGPU(0): Modeline "1366x768"x0.0 76.30 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz eP)
[ 506.675] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
[ 507.224] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
[ 507.227] (II) AMDGPU(0): Allocate new frame buffer 1920x1080
[ 507.227] (II) AMDGPU(0): => pitch 7680 bytes
[ 508.625] (II) AMDGPU(0): EDID vendor "AUO", prod id 29164
[ 508.625] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 508.625] (II) AMDGPU(0): Modeline "1366x768"x0.0 76.30 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz eP)
--bzdvejfuwolmzzhv--
From: Mayuresh <mayuresh@acm.org>
To: gnats-bugs@netbsd.org
Cc: port-amd64-maintainer@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org
Subject: Re: port-amd64/57144: No HDMI output, no touchpad recognized on AMD
Radeon based laptop
Date: Sun, 1 Jan 2023 13:44:19 +0530
Update: With native X11, hdmi works fine, no slowness issues.
Following parts of the PR are still valid:
1. The laptop monitor eDP shows very faint movements right after dispaly
mode switching during boot or after startx.
2. Touchpad doesn't work, not recognized. Brett Lymn is possibly taking a
look.
3. Less important, but curious why things didn't work with modular X11.
(Contact us)
$NetBSD: query-full-pr,v 1.47 2022/09/11 19:34:41 kim Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2023
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.
Home