NetBSD Problem Report #57182

From is@eva.localdomain  Wed Jan 11 11:21:17 2023
Return-Path: <is@eva.localdomain>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
	(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
	by mollari.NetBSD.org (Postfix) with ESMTPS id A1FEE1A9239
	for <gnats-bugs@gnats.NetBSD.org>; Wed, 11 Jan 2023 11:21:17 +0000 (UTC)
Message-Id: <20230111112110.E8F6B63DB7@eva.localdomain>
Date: Wed, 11 Jan 2023 12:21:10 +0100 (CET)
From: is@netbsd.org
Reply-To: is@netbsd.org
To: gnats-bugs@NetBSD.org
Subject: nouveau doesn't switches LVDS off
X-Send-Pr-Version: 3.95

>Number:         57182
>Category:       kern
>Synopsis:       nouveau doesn't switches LVDS off
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Jan 11 11:25:00 +0000 2023
>Originator:     is@netbsd.org
>Release:        NetBSD 10.0_BETA
>Organization:

>Environment:
NetBSD 10.0_BETA (GENERIC) #0: Tue Jan 10 20:43:02 CET 2023
        is@neuserv:/var/itch/sources/10/obj.amd64/sys/arch/amd64/compile/GENERIC
Machine: amd64

GENERIC.local is
options MAXURPX=8192
options MAXLWP=8192
options HZ=1000

Userland is NetBSD-9.3_STABLE, with the NetBSD-10.0_BETA modules, 
and /libdata/firmware/nouveau  installed

The graphics is supposed to be a nVIDIA Quadro FX 2800M 1GB, but
identifies as G92, which our man page sorts into Geforce [89]xxx|[23]xx

>Description:
	after this line (see below for full dmesg):

Initialized nouveau 1.3.1 20120801 for nouveau0 on minor 0

	that is, before this line could be shown:

nouveaufb0: framebuffer at 0xd0006000, size 1920x1200, depth 32, stride 7680

	the display goes black. There is no VGA output either, and no
	DVI-D output that can be displayed bya a 1920x1080 DELL monitor
	I have around. I have no DP - HDMI cable around; maybe could 
	borrow one in a few days.

	It's possible to ssh in, however.

Note that NetBSD-9.3_STABLE says

eva$ /sbin/dmesg | grep graphics\ memory
[     6.695773] Zone  kernel: Available graphics memory: 3311384 kiB
[     6.695773] Zone   dma32: Available graphics memory: 2097152 kiB

while 10-BETA says

Zone  kernel: Available graphics memory: 9007199253996618 KiB
Zone   dma32: Available graphics memory: 2097152 KiB

10-BETA dmesg:

rebooting...
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 10.0_BETA (GENERIC) #0: Tue Jan 10 20:43:02 CET 2023
	is@neuserv:/var/itch/sources/10/obj.amd64/sys/arch/amd64/compile/GENERIC
total memory = 10171 MB
avail memory = 9814 MB
timecounter: Timecounters tick every 1.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F6820 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BBFF1114 00009C (v01 LENOVO TP-6K    00001290  LTP 00000000)
ACPI: FACP 0x00000000BBFF1200 0000F4 (v04 LENOVO TP-6K    00001290 LNVO 00000001)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20221020/tbfadt-640)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20221020/tbfadt-742)
ACPI: DSDT 0x00000000BBFF149B 00D652 (v01 LENOVO TP-6K    00001290 MSFT 03000001)
ACPI: FACS 0x00000000BBEE7000 000040
ACPI: SSDT 0x00000000BBFF13B4 0000E7 (v01 LENOVO TP-6K    00001290 MSFT 03000001)
ACPI: ECDT 0x00000000BBFFEAED 000052 (v01 LENOVO TP-6K    00001290 LNVO 00000001)
ACPI: APIC 0x00000000BBFFEB3F 0000BC (v01 LENOVO TP-6K    00001290 LNVO 00000001)
ACPI: MCFG 0x00000000BBFFEBFB 00003C (v01 LENOVO TP-6K    00001290 LNVO 00000001)
ACPI: HPET 0x00000000BBFFEC37 000038 (v01 LENOVO TP-6K    00001290 LNVO 00000001)
ACPI: ASF! 0x00000000BBFFEDBE 0000A4 (v16 LENOVO TP-6K    00001290 PTL  00000001)
ACPI: SLIC 0x00000000BBFFEE62 000176 (v01 LENOVO TP-6K    00001290  LTP 00000000)
ACPI: BOOT 0x00000000BBFFEFD8 000028 (v01 LENOVO TP-6K    00001290  LTP 00000001)
ACPI: SSDT 0x00000000BBEE591A 000A06 (v01 LENOVO TP-6K    00001290 INTL 20050513)
ACPI: TCPA 0x00000000BBF8B000 000032 (v02 PTL     CRESTLN 06040000      00005A52)
ACPI: DMAR 0x00000000BBF81000 000068 (v01 INTEL  CP_FIELD 00000001 INTL 00000001)
ACPI: SSDT 0x00000000BBF7C000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20060912)
ACPI: SSDT 0x00000000BBF7B000 000259 (v01 PmRef  Cpu0Tst  00003000 INTL 20060912)
ACPI: SSDT 0x00000000BBF7A000 00049F (v01 PmRef  ApTst    00003000 INTL 20060912)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz, id 0x106e5
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz, id 0x106e5
cpu1: node 0, package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz, id 0x106e5
cpu2: node 0, package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz, id 0x106e5
cpu3: node 0, package 0, core 1, smt 1
cpu4 at mainbus0 apid 4
cpu4: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz, id 0x106e5
cpu4: node 0, package 0, core 2, smt 0
cpu5 at mainbus0 apid 5
cpu5: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz, id 0x106e5
cpu5: node 0, package 0, core 2, smt 1
cpu6 at mainbus0 apid 6
cpu6: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz, id 0x106e5
cpu6: node 0, package 0, core 3, smt 0
cpu7 at mainbus0 apid 7
cpu7: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz, id 0x106e5
cpu7: node 0, package 0, core 3, smt 1
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <LENOVO,TP-6K   ,00001290>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFED2271830488 000367 (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFED20C6AFA808 0006B2 (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFED227063DB48 000303 (v01 PmRef  ApIst    00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFED20C6AF4A08 000119 (v01 PmRef  ApCst    00003000 INTL 20060912)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
tpm0 at acpi0 (TPM, SMO1200-1): mem 0xfed40000-0xfed44fff
tpm0: device 0x0000104a rev 0x4e
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: version 0100
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [11,13,15-16,19,22,26,30,35,40,47,55,63,73,86,100]
acpiout1 at acpivga0 (LCD2, 0x0111): ACPI Display Output Device
acpiout2 at acpivga0 (DPD0, 0x0113): ACPI Display Output Device
acpiout3 at acpivga0 (DPD1, 0x0114): ACPI Display Output Device
acpiout4 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout5 at acpivga0 (DVI0, 0x0112): ACPI Display Output Device
acpiout6 at acpivga0 (DP0, 0x0115): ACPI Display Output Device
acpiout7 at acpivga0 (DP1, 0x0116): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout4): Ext. Monitor, head 0
acpivga0:   0x0112 (acpiout5): Unknown Output Device, head 0
acpivga0:   0x0115 (acpiout6): Unknown Output Device, head 0
acpivga0:   0x0116 (acpiout7): Unknown Output Device, head 0
acpivga0:   0x0113 (acpiout2): Unknown Output Device, head 0
acpivga0:   0x0114 (acpiout3): Unknown Output Device, head 0
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0
acpivga0:   0x0111 (acpiout1): Unknown Output Device, head 0
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpitz0 at acpi0 (THM0): cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
acpitz0: levels: critical 100.0 C, passive 89.5 C, passive cooling
ACPI: Enabled 2 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.0
pms0: Passthrough, Palm detect, Reports max
pms0: Probed max coordinates right: 5598, top: 4670
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Core Processor DMI (rev. 0x11)
ppb0 at pci0 dev 3 function 0: Intel Core Processor PCIe Root Port (x16 or x8 max) (rev. 0x11)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
ppb0: link is x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
nouveau0 at pci1 dev 0 function 0: NVIDIA product 061d (rev. 0xa2)
Intel Core Processor System Management Registers (miscellaneous system, revision 0x11) at pci0 dev 8 function 0 not configured
Intel Core Processor Semaphore and Scratchpad Registers (miscellaneous system, revision 0x11) at pci0 dev 8 function 1 not configured
Intel Core Processor System Control and Status Registers (miscellaneous system, revision 0x11) at pci0 dev 8 function 2 not configured
Intel Core Processor Miscellaneous Registers (miscellaneous system, revision 0x11) at pci0 dev 8 function 3 not configured
Intel Core Processor QPI Link (miscellaneous system, revision 0x11) at pci0 dev 16 function 0 not configured
Intel Core Processor QPI Routing and Protocol Registers (miscellaneous system, revision 0x11) at pci0 dev 16 function 1 not configured
Intel 3400 MEI (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH LAN (82577LM) Controller (rev. 0x06)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.12.1
wm0: Ethernet address f0:de:f1:37:15:49
wm0: 0x2a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL>
ihphy0 at wm0 phy 2: i82577 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: Intel 3400 USB ECHI (rev. 0x06)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: Using DMA subregion for control data structures
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Conexant CX20585
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: Speaker [Built-In]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
hdvsmfg at hdaudio0 not configured
ppb1 at pci0 dev 28 function 0: Intel 3400 PCIe (rev. 0x06)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci2 dev 0 function 0: Ricoh 5U822 SD/MMC Controller (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 1.0, rev 4, caps <01e032b2/00000000>, SDMA, 50000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
fwohci0 at pci2 dev 0 function 3: Ricoh 5U832 Firewire Controller (rev. 0x01)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 f0:de:f1:ff:37:15:49:ff
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
ppb2 at pci0 dev 28 function 1: Intel 3400 PCIe (rev. 0x06)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci3 dev 0 function 0: Intel Centrino Ultimate-N 6300 (rev. 0x35)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 3T3R, MoW, address 00:24:d7:86:e8:98
ppb3 at pci0 dev 28 function 3: Intel 3400 PCIe (rev. 0x06)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: Intel 3400 PCIe (rev. 0x06)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 13
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc1 at pci5 dev 0 function 0: Ricoh 5U822 SD/MMC Controller (rev. 0x01)
sdhc1: interrupting at ioapic0 pin 16
sdhc1: SDHC 1.0, rev 4, caps <01e032b2/00000000>, SDMA, 50000 kHz, HS 3.3V, 512 byte blocks
sdmmc1 at sdhc1 slot 0
Ricoh 5U230 FireWire/SD/MMC/xD/MS Controller (miscellaneous system, revision 0x01) at pci5 dev 0 function 1 not configured
ppb5 at pci0 dev 28 function 6: Intel 3400 PCIe (rev. 0x06)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci6 at ppb5 bus 14
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 28 function 7: Intel 3400 PCIe (rev. 0x06)
ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci7 at ppb6 bus 22
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci7 dev 0 function 0: NEC Renesas Electronics USB 3.0 Host Controller (rev. 0x03)
xhci0: 64-bit DMA
xhci0: interrupting at msix3 vec 0
xhci0: xHCI version 0.96
usb1 at xhci0: USB revision 3.0
usb2 at xhci0: USB revision 2.0
ehci1 at pci0 dev 29 function 0: Intel 3400 USB EHCI (rev. 0x06)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: Using DMA subregion for control data structures
usb3 at ehci1: USB revision 2.0
ppb7 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xa6)
pci8 at ppb7 bus 24
pci8: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: Intel QM57 LPC Interface Bridge (rev. 0x06)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: Intel 3400 AHCI (rev. 0x06)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff22ff65<SXS,EMS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi4 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 4
atabus4 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: Intel 3400 SMBus (rev. 0x06)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pci9 at mainbus0 bus 255
pci9: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb1 at pci9 dev 0 function 0: Intel product 2c52 (rev. 0x04)
pchb2 at pci9 dev 0 function 1: Intel Core i7-800 and i5-700 QuickPath Generic System Address Decoder (rev. 0x04)
pchb3 at pci9 dev 2 function 0: Intel Core i7-800 and i5-700 QPI Link (rev. 0x04)
pchb4 at pci9 dev 2 function 1: Intel Core i7-800 and i5-700 QPI Physical (rev. 0x04)
pchb5 at pci9 dev 3 function 0: Intel Core i7-800 and i5-700 IMC (rev. 0x04)
pchb6 at pci9 dev 3 function 1: Intel Core i7-800 and i5-700 IMC Target Address Decoder (rev. 0x04)
pchb7 at pci9 dev 3 function 4: Intel Core i7-800 and i5-700 IMC Test (rev. 0x04)
pchb8 at pci9 dev 4 function 0: Intel Core i7-800 and i5-700 IMC Channel 0 Control (rev. 0x04)
pchb9 at pci9 dev 4 function 1: Intel Core i7-800 and i5-700 IMC Channel 0 Address (rev. 0x04)
pchb10 at pci9 dev 4 function 2: Intel Core i7-800 and i5-700 IMC Channel 0 Rank (rev. 0x04)
pchb11 at pci9 dev 4 function 3: Intel Core i7-800 and i5-700 IMC Channel 0 Thermal Control (rev. 0x04)
pchb12 at pci9 dev 5 function 0: Intel Core i7-800 and i5-700 IMC Channel 1 Control (rev. 0x04)
pchb13 at pci9 dev 5 function 1: Intel Core i7-800 and i5-700 IMC Channel 1 Address (rev. 0x04)
pchb14 at pci9 dev 5 function 2: Intel Core i7-800 and i5-700 IMC Channel 1 Rank (rev. 0x04)
pchb15 at pci9 dev 5 function 3: Intel Core i7-800 and i5-700 IMC Channel 1 Thermal Control (rev. 0x04)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C2: FFH, lat 205 us, pow   500 mW
acpicpu0: C3: FFH, lat 245 us, pow   350 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 45000 mW, 1600 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 45000 mW, 1599 MHz
acpicpu0: P2: FFH, lat  10 us, pow 41485 mW, 1466 MHz
acpicpu0: P3: FFH, lat  10 us, pow 38112 mW, 1333 MHz
acpicpu0: P4: FFH, lat  10 us, pow 34806 mW, 1199 MHz
acpicpu0: P5: FFH, lat  10 us, pow 31508 mW, 1066 MHz
acpicpu0: P6: FFH, lat  10 us, pow 28341 mW,  933 MHz
acpicpu0: T0: FFH, lat   1 us, pow 28341 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow 24798 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow 21255 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow 17713 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow 14170 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow 10627 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow  7085 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow  3542 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
coretemp2 at cpu4: thermal sensor, 1 C resolution, Tjmax=100
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
coretemp3 at cpu6: thermal sensor, 1 C resolution, Tjmax=100
acpicpu7 at cpu7: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 1000 Hz quality 0
timecounter: Timecounter "TSC" frequency 1596002000 Hz quality 3000
uhub0 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
acpiacad0: AC adapter online.
uhub2 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <Samsung SSD 860 PRO 1TB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 953 GB, 1984533 cyl, 16 head, 63 sec, 512 bytes/sect x 2000409264 sectors
wd0: GPT GUID: f24d50ef-81a4-4beb-87f4-6158e03ecc90
dk0 at wd0: "1321a4c5-1ed5-4f51-b753-f2440cc08d5f", 104857600 blocks at 2048, type: ffs
dk1 at wd0: "833f3996-329f-48e9-9a4e-3d8d36566859", 20832256 blocks at 104859648, type: swap
dk2 at wd0: "74f24a0d-2e99-476e-b862-3e20865fc638", 209715200 blocks at 125691904, type: ffs
dk3 at wd0: "1392af5e-e044-4e84-9efe-afef7b44069f", 20971520 blocks at 335407104, type: ffs
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVDRAM GT30N, M2IAC452112, LT10> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA)
uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0020 (0x0020), class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0020 (0x0020), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
uhub6 at uhub5 port 8: vendor 17ef (0x17ef) product 1008 (0x1008), class 9/0, rev 2.00/0.00, addr 3
uhub6: multiple transaction translators
ugen0 at uhub4 port 3
ugen0: UPEK (0x147e) Biometric Coprocessor (0x2016), rev 1.01/0.02, addr 3
uhub6: 7 ports with 2 removable, self powered
uvideo0 at uhub4 port 6 configuration 1 interface 0: Chicony Electronics Co., Ltd. (0x17ef) Integrated Camera (0x4816), rev 2.00/23.45, addr 4
video0 at uvideo0: Chicony Electronics Co., Ltd. (0x17ef) Integrated Camera (0x4816), rev 2.00/23.45, addr 4
swwdog0: software watchdog initialized
boot device: wd0
root on dk0 dumps on dk1
root file system type: ffs
kern.module.path=/stand/amd64/10.0/modules
nouveau0: NVIDIA G92 (092e80a2)
nouveau0: bios: version 62.92.b5.00.0c
nouveau0: mxm: BIOS version 3.0
nouveau0: notice: mxm: failed to locate valid SIS
nouveau0: interrupting at msi5 vec 0 (nouveau0)
nouveau0: fb: 1024 MiB GDDR3
Zone  kernel: Available graphics memory: 9007199253996588 KiB
Zone   dma32: Available graphics memory: 2097152 KiB
nouveau0: DRM: VRAM: 1024 MiB
nouveau0: DRM: GART: 1048576 MiB
nouveau0: DRM: TMDS table version 2.0
nouveau0: DRM: DCB version 4.0
nouveau0: DRM: DCB outp 00: 01000323 00010034
nouveau0: DRM: DCB outp 04: 02013312 00020010
nouveau0: DRM: DCB outp 07: 02014312 00020030
nouveau0: DRM: DCB outp 09: 02126326 0f220d10
nouveau0: DRM: DCB outp 10: 02126322 00020d10
nouveau0: DRM: DCB outp 11: 02127326 0f220d20
nouveau0: DRM: DCB outp 12: 02127322 00020d20
nouveau0: DRM: DCB outp 13: 02038300 00000028
nouveau0: DRM: DCB conn 00: 00000040
nouveau0: DRM: DCB conn 01: 00001161
nouveau0: DRM: DCB conn 02: 00001231
nouveau0: DRM: DCB conn 03: 00002331
nouveau0: DRM: DCB conn 04: 00002431
nouveau0: DRM: DCB conn 05: 02010531
nouveau0: DRM: DCB conn 06: 02010646
nouveau0: DRM: DCB conn 07: 02010746
nouveau0: DRM: DCB conn 08: 00000800
nouveau0: DRM: MM: using CRYPT for buffer copies
Supports vblank timestamp caching Rev 2 (21.10.2013).
Driver supports precise vblank timestamp query.
nouveaufb0 at nouveau0
Initialized nouveau 1.3.1 20120801 for nouveau0 on minor 0
---- text below not visible on display ----
nouveaufb0: framebuffer at 0xd0006000, size 1920x1200, depth 32, stride 7680
nouveau0: autoconfiguration error: error: DRM: core notifier timeout
nouveau0: autoconfiguration error: error: DRM: base-0: timeout
wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
acpibat0: normal capacity on 'charge state'
fatal breakpoint trap in supervisor mode
trap type 1 code 0 rip 0xffffffff80235315 cs 0x8 rflags 0x202 cr2 0x79f5b3fa3000 ilevel 0x6 rsp 0xffffa702af084cf8
curlwp 0xffffed2271817040 pid 0.2 lowest kstack 0xffffa702af0802c0
fatal breakpoint trap in supervisor mode
trap type 1 code 0 rip 0xffffffff80235315 cs 0x8 rflags 0x202 cr2 0x79f5b3fa3000 ilevel 0x8 rsp 0xffffa702af084820
curlwp 0xffffed2271817040 pid 0.2 lowest kstack 0xffffa702af0802c0
fatal breakpoint trap in supervisor mode
trap type 1 code 0 rip 0xffffffff80235315 cs 0x8 rflags 0x202 cr2 0x79f5b3fa3000 ilevel 0x8 rsp 0xffffa702af084820
curlwp 0xffffed2271817040 pid 0.2 lowest kstack 0xffffa702af0802c0
rebooting...

>How-To-Repeat:
	boot.
>Fix:
	unknown.

	Workaround: use 9.3_STABLE (with its own or with 10_BETA nouveau 
	firmware), but X feels not accellerated and firefox uses llvmpipe.

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.47 2022/09/11 19:34:41 kim Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2023 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.