NetBSD Problem Report #57330
From adrian@mx.aik.onl Fri Apr 7 13:10:18 2023
Return-Path: <adrian@mx.aik.onl>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
by mollari.NetBSD.org (Postfix) with ESMTPS id 2C84A1A9239
for <gnats-bugs@gnats.NetBSD.org>; Fri, 7 Apr 2023 13:10:18 +0000 (UTC)
Message-Id: <20230407124608.7AE57402EFD@elitebook.lan.dac>
Date: Fri, 7 Apr 2023 14:46:08 +0200 (CEST)
From: adrian@mx.aik.onl
Reply-To: adrian@kiess.onl
To: gnats-bugs@NetBSD.org
Subject: NetBSD 10 daily kernel does not boot by default by choosing wrong root device
X-Send-Pr-Version: 3.95
>Number: 57330
>Category: kern
>Synopsis: NetBSD 10 daily kernel chooses wrong root device
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Fri Apr 07 13:15:00 +0000 2023
>Last-Modified: Fri Apr 07 13:45:02 +0000 2023
>Originator: Adrian Immanuel Kiess
>Release: NetBSD 9.3
>Organization:
>Environment:
System: NetBSD elitebook.lan.dac 9.3 NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
Architecture: x86_64
Machine: amd64
>Description:
Dear maintainers,
Riastradh on the #NetBSD channel @ Libera.chat asked me, to write this bug report.
The problem is as following: I boot into my NetBSD installation using EFI boot, in the following way:
boot NAME=NetBSD:netbsd-10
where the kernel chooses the wrong root device, dk0 instead of dk1.
Possible problem could be: I marked the dk0 device (EFI MSDOS partition) with the "boot" flag during installation, and I don't know how to alter the boot flag of partitions.
When booting with:
boot NAME=NetBSD:netbsd-10 -a
I get asked during boot to specify the root device (dk1 instead of dk0) and the new kernel boots fine.
I will attach the following files and informations:
dkctl wd0 listwedges:
root@elitebook /home/adrian # dkctl wd0 listwedges
/dev/rwd0: 3 wedges:
dk0: EFI system, 507904 blocks at 4096, type: msdos
dk1: NetBSD, 285212672 blocks at 512000, type: ffs
dk2: swap, 65925120 blocks at 285724672, type: swap
/efi/boot.cfg:
root@elitebook /home/adrian # cat /efi/boot.cfg
menu=Boot normally:rndseed /var/db/entropy-file;boot NAME=NetBSD:netbsd
menu=Boot single user:rndseed /var/db/entropy-file;boot NAME=NetBSD:netbsd -s
menu=Drop to boot prompt:prompt
default=1
timeout=5
clear=1
dmesg on NetBSD 10:
[ 1,000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1,000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1,000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[ 1,000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1,000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1,000000] The Regents of the University of California. All rights reserved.
[ 1,000000] NetBSD 10.0_BETA (GENERIC) #0: Mon Apr 3 18:36:09 UTC 2023
[ 1,000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1,000000] total memory = 8067 MB
[ 1,000000] avail memory = 7775 MB
[ 1,000000] timecounter: Timecounters tick every 10.000 msec
[ 1,000000] Kernelized RAIDframe activated
[ 1,000000] RTC BIOS diagnostic error 0xbd<clock_battery,config_unit,memory_size,fixed_disk,invalid_time>
[ 1,000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1,000004] efi: systbl at pa a947ef18
[ 1,000004] mainbus0 (root)
[ 1,000004] ACPI: RSDP 0x00000000A9FFE014 000024 (v02 HPQOEM)
[ 1,000004] ACPI: XSDT 0x00000000A9FFD0E8 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 1,000004] ACPI: FACP 0x00000000A9FFB000 00010C (v05 HPQOEM 225A 00000001 HP 00000001)
[ 1,000004] ACPI: DSDT 0x00000000A9FCF000 026A0D (v02 HPQOEM 225A 00000001 INTL 20130927)
[ 1,000004] ACPI: FACS 0x00000000A9F66000 000040
[ 1,000004] ACPI: HPET 0x00000000A9FFA000 000038 (v01 HPQOEM 225A 00000001 HP 00000001)
[ 1,000004] ACPI: APIC 0x00000000A9FF9000 0000BC (v01 HPQOEM 225A 00000001 HP 00000001)
[ 1,000004] ACPI: MCFG 0x00000000A9FF8000 00003C (v01 HPQOEM 225A 00000001 HP 00000001)
[ 1,000004] ACPI: TCPA 0x00000000A9FF6000 000032 (v02 HPQOEM 225A 00000000 HP 00000001)
[ 1,000004] ACPI: SSDT 0x00000000A9FCC000 0002D9 (v01 HPQOEM SataAhci 00001000 INTL 20130927)
[ 1,000004] ACPI: SSDT 0x00000000A9FCB000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20130927)
[ 1,000004] ACPI: SLIC 0x00000000A9FCA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 1,000004] ACPI: MSDM 0x00000000A9FC9000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
[ 1,000004] ACPI: FPDT 0x00000000A9FC8000 000044 (v01 HPQOEM 225A 00000001 HP 00000001)
[ 1,000004] ACPI: BGRT 0x00000000A9FC7000 000038 (v00 HPQOEM 225A 00000001 HP 00000001)
[ 1,000004] ACPI: SSDT 0x00000000A9FC3000 000544 (v02 PmRef Cpu0Ist 00003000 INTL 20130927)
[ 1,000004] ACPI: SSDT 0x00000000A9FC2000 000B8F (v02 CpuRef CpuSsdt 00003000 INTL 20130927)
[ 1,000004] ACPI: SSDT 0x00000000A9FC1000 0001D5 (v02 PmRef LakeTiny 00003000 INTL 20130927)
[ 1,000004] ACPI: SSDT 0x00000000A9FC0000 00092C (v02 SaSsdt SaSsdt 00003000 INTL 20130927)
[ 1,000004] ACPI: ASF! 0x00000000A9FF7000 0000A5 (v32 HPQOEM 225A 00000001 HP 00000001)
[ 1,000004] ACPI: DMAR 0x00000000A9FBF000 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 1,000004] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 1,000004] ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 40 pins
[ 1,000004] x2APIC available but disabled by DMAR table
[ 1,000004] cpu0 at mainbus0 apid 0
[ 1,000004] cpu0: Use lfence to serialize rdtsc
[ 1,000004] cpu0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
[ 1,000004] cpu0: node 0, package 0, core 0, smt 0
[ 1,000004] cpu1 at mainbus0 apid 1
[ 1,000004] cpu1: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
[ 1,000004] cpu1: node 0, package 0, core 0, smt 1
[ 1,000004] cpu2 at mainbus0 apid 2
[ 1,000004] cpu2: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
[ 1,000004] cpu2: node 0, package 0, core 1, smt 0
[ 1,000004] cpu3 at mainbus0 apid 3
[ 1,000004] cpu3: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
[ 1,000004] cpu3: node 0, package 0, core 1, smt 1
[ 1,000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1,000004] acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId < ,01000013>
[ 1,000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[ 1,000004] ACPI: Dynamic OEM Table Load:
[ 1,000004] ACPI: SSDT 0xFFFF869AEB848808 0003F3 (v02 PmRef Cpu0Cst 00003001 INTL 20130927)
[ 1,000004] ACPI: Dynamic OEM Table Load:
[ 1,000004] ACPI: SSDT 0xFFFF869AEB84D808 0005DB (v02 PmRef ApIst 00003000 INTL 20130927)
[ 1,000004] ACPI: Dynamic OEM Table Load:
[ 1,000004] ACPI: SSDT 0xFFFF869AEB8384C8 000119 (v02 PmRef ApCst 00003000 INTL 20130927)
[ 1,000004] acpi0: SCI interrupting at int 9
[ 1,000004] acpi0: fixed power button present
[ 1,000004] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
[ 1,041250] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1,041250] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1,042059] acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
[ 1,042059] WLBU (HPQ6001) at acpi0 not configured
[ 1,042059] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1,042059] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
[ 1,042059] acpiout0: brightness levels: [0-67,69-100]
[ 1,042059] acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
[ 1,042059] acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
[ 1,042059] acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
[ 1,042059] acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
[ 1,042059] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
[ 1,042059] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
[ 1,042059] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
[ 1,042059] acpivga0: connected output devices:
[ 1,042059] acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
[ 1,042059] FWHD (INT0800) at acpi0 not configured
[ 1,042059] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
[ 1,042059] pckbc1 at acpi0 (PS2K, HPQ8002) (kbd port): io 0x60,0x64 irq 1
[ 1,042059] pckbc2 at acpi0 (PS2M, SYN3021) (aux port): irq 12
[ 1,042059] ACEL (HPQ6007) at acpi0 not configured
[ 1,042059] acpibat0 at acpi0 (BAT0, PNP0C0A-2): ACPI Battery
[ 1,042059] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
[ 1,042059] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1,042059] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1,042059] acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
[ 1,042059] wmihp0 at acpiwmi0: HP WMI mappings
[ 1,042059] tpm0 at acpi0 (GTPM, IFX0102)tpm0: autoconfiguration error: cannot find mem
[ 1,042059] acpitz0 at acpi0 (CPUZ)
[ 1,042059] acpitz0: levels: critical 128.0 C, hot 104.0 C, passive cooling
[ 1,042059] acpitz1 at acpi0 (GFXZ): cpu0
[ 1,042059] acpitz1: levels: critical 128.0 C, passive 105.0 C, passive cooling
[ 1,042059] acpitz2 at acpi0 (EXTZ)
[ 1,042059] acpitz2: levels: critical 128.0 C, passive cooling
[ 1,042059] acpitz3 at acpi0 (LOCZ)
[ 1,042059] acpitz3: levels: critical 128.0 C, passive cooling
[ 1,042059] acpitz4 at acpi0 (BATZ): cpu0
[ 1,042059] acpitz4: levels: critical 128.0 C, passive 55.0 C, passive cooling
[ 1,042059] acpitz5 at acpi0 (PCHZ)
[ 1,042059] acpitz5: levels: critical 128.0 C, passive cooling
[ 1,042059] acpitz6 at acpi0 (DM1Z)
[ 1,042059] acpitz6: levels: critical 128.0 C, passive cooling
[ 1,042059] acpitz7 at acpi0 (DM2Z)
[ 1,042059] acpitz7: levels: critical 128.0 C, passive cooling
[ 1,042059] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 1,042059] pckbd0 at pckbc1 (kbd slot)
[ 1,042059] pckbc1: using irq 1 for kbd slot
[ 1,042059] wskbd0 at pckbd0: console keyboard
[ 1,042059] pms0 at pckbc1 (aux slot)
[ 1,042059] pckbc1: using irq 12 for aux slot
[ 1,042059] wsmouse0 at pms0 mux 0
[ 1,042059] pci0 at mainbus0 bus 0: configuration mode 1
[ 1,042059] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1,042059] pchb0 at pci0 dev 0 function 0: Intel Core 5G Host Bridge (rev. 0x09)
[ 1,042059] i915drmkms0 at pci0 dev 2 function 0: Intel HD Graphics 5500 (rev. 0x09)
[ 1,042059] hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
[ 1,042059] hdaudio0: interrupting at msi0 vec 0
[ 1,042059] hdaudio0: HDA ver. 1.0, OSS 3, ISS 0, BSS 0, SDO 1, 64-bit
[ 1,042059] hdafg0 at hdaudio0: Intel HDMI/DP
[ 1,042059] hdafg0: DP00 8ch: Digital Out [Jack]
[ 1,042059] hdafg0: 8ch/0ch 48000Hz PCM16*
[ 1,042059] audio0 at hdafg0: playback
[ 1,042059] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1,042059] spkr0 at audio0: PC Speaker (synthesized)
[ 1,042059] wsbell at spkr0 not configured
[ 1,042059] xhci0 at pci0 dev 20 function 0: Intel Core 5G (mobile) USB xHCI (rev. 0x03)
[ 1,042059] xhci0: 64-bit DMA
[ 1,042059] xhci0: interrupting at msi1 vec 0
[ 1,042059] xhci0: xHCI version 1.0
[ 1,042059] usb0 at xhci0: USB revision 3.0
[ 1,042059] usb1 at xhci0: USB revision 2.0
[ 1,042059] Intel Core 5G (mobile) ME Interface (miscellaneous communications, revision 0x03) at pci0 dev 22 function 0 not configured
[ 1,042059] wm0 at pci0 dev 25 function 0, 64-bit DMA: I218 LM Ethernet Connection (rev. 0x03)
[ 1,042059] wm0: interrupting at msi2 vec 0
[ 1,042059] wm0: PCI-Express bus
[ 1,042059] wm0: 2048 words FLASH, version 0.2.4
[ 1,042059] wm0: Ethernet address 70:5a:0f:82:be:43
[ 1,042059] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
[ 1,042059] ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 5
[ 1,042059] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1,042059] hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
[ 1,042059] hdaudio1: interrupting at msi3 vec 0
[ 1,042059] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1,042059] hdafg1 at hdaudio1: Realtek ALC280
[ 1,042059] hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[ 1,042059] hdafg1: ADC01 2ch: Mic In [Jack]
[ 1,042059] hdafg1: ADC02 2ch: Mic In [Built-In]
[ 1,042059] hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[ 1,042059] audio1 at hdafg1: playback, capture, full duplex, independent
[ 1,042059] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1,042059] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1,042059] spkr1 at audio1: PC Speaker (synthesized)
[ 1,042059] wsbell at spkr1 not configured
[ 1,042059] ppb0 at pci0 dev 28 function 0: Intel Core 5G (mobile) PCIe (rev. 0xe3)
[ 1,042059] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1,042059] pci1 at ppb0 bus 1
[ 1,042059] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1,042059] ppb1 at pci0 dev 28 function 1: Intel Core 5G (mobile) PCIe (rev. 0xe3)
[ 1,042059] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1,042059] ppb1: link is x1 @ 2.5GT/s
[ 1,042059] pci2 at ppb1 bus 2
[ 1,042059] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1,042059] rtsx0 at pci2 dev 0 function 0: Realtek Semiconductor RTS5227 PCI-E Card Reader (rev. 0x01)
[ 1,042059] rtsx0: interrupting at msi4 vec 0
[ 1,042059] sdmmc0 at rtsx0
[ 1,042059] ppb2 at pci0 dev 28 function 3: Intel Core 5G (mobile) PCIe (rev. 0xe3)
[ 1,042059] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1,042059] ppb2: link is x1 @ 2.5GT/s
[ 1,042059] pci3 at ppb2 bus 3
[ 1,042059] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1,042059] iwm0 at pci3 dev 0 function 0: Intel Dual Band Wireless AC 7265 (rev. 0x48)
[ 1,042059] iwm0: interrupting at msi5 vec 0
[ 1,042059] ehci0 at pci0 dev 29 function 0: Intel Core 5G (mobile) USB EHCI (rev. 0x03)
[ 1,042059] ehci0: 64-bit DMA
[ 1,042059] ehci0: interrupting at ioapic0 pin 17
[ 1,042059] ehci0: EHCI version 1.0
[ 1,042059] ehci0: Using DMA subregion for control data structures
[ 1,042059] usb2 at ehci0: USB revision 2.0
[ 1,042059] pcib0 at pci0 dev 31 function 0: Intel Core 5G (mobile) LPC (rev. 0x03)
[ 1,042059] ahcisata0 at pci0 dev 31 function 2: Intel Core 5G (mobile) SATA Controller (AHCI) (rev. 0x03)
[ 1,042059] ahcisata0: 64-bit DMA
[ 1,042059] ahcisata0: AHCI revision 1.30, 3 ports, 32 slots, CAP 0xc734ff02<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
[ 1,042059] ahcisata0: interrupting at msi6 vec 0
[ 1,042059] atabus0 at ahcisata0 channel 1
[ 1,042059] atabus1 at ahcisata0 channel 3
[ 1,042059] ichsmb0 at pci0 dev 31 function 3: Intel Core 5G (mobile) SMBus (rev. 0x03)
[ 1,042059] ichsmb0: interrupting at ioapic0 pin 18
[ 1,042059] iic0 at ichsmb0: I2C bus
[ 1,042059] isa0 at pcib0
[ 1,042059] pcppi0 at isa0 port 0x61
[ 1,042059] spkr2 at pcppi0: PC Speaker
[ 1,042059] wsbell at spkr2 not configured
[ 1,042059] midi0 at pcppi0: PC speaker
[ 1,042059] sysbeep0 at pcppi0
[ 1,042059] attimer1: attached to pcppi0
[ 1,042059] acpicpu0 at cpu0: ACPI CPU
[ 1,042059] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1,042059] acpicpu0: C2: FFH, lat 230 us, pow 200 mW
[ 1,042059] acpicpu0: C3: FFH, lat 506 us, pow 200 mW
[ 1,042059] acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 2301 MHz, turbo boost
[ 1,042059] acpicpu0: P1: FFH, lat 10 us, pow 15000 mW, 2300 MHz
[ 1,042059] acpicpu0: P2: FFH, lat 10 us, pow 14088 mW, 2200 MHz
[ 1,042059] acpicpu0: P3: FFH, lat 10 us, pow 12462 mW, 2000 MHz
[ 1,042059] acpicpu0: P4: FFH, lat 10 us, pow 11745 mW, 1900 MHz
[ 1,042059] acpicpu0: P5: FFH, lat 10 us, pow 11042 mW, 1800 MHz
[ 1,042059] acpicpu0: P6: FFH, lat 10 us, pow 10215 mW, 1700 MHz
[ 1,042059] acpicpu0: P7: FFH, lat 10 us, pow 8882 mW, 1500 MHz
[ 1,042059] acpicpu0: P8: FFH, lat 10 us, pow 8101 mW, 1400 MHz
[ 1,042059] acpicpu0: P9: FFH, lat 10 us, pow 7471 mW, 1300 MHz
[ 1,042059] acpicpu0: P10: FFH, lat 10 us, pow 6121 mW, 1100 MHz
[ 1,042059] acpicpu0: P11: FFH, lat 10 us, pow 5531 mW, 1000 MHz
[ 1,042059] acpicpu0: P12: FFH, lat 10 us, pow 4955 mW, 900 MHz
[ 1,042059] acpicpu0: P13: FFH, lat 10 us, pow 4267 mW, 800 MHz
[ 1,042059] acpicpu0: P14: FFH, lat 10 us, pow 3182 mW, 600 MHz
[ 1,042059] acpicpu0: P15: FFH, lat 10 us, pow 2538 mW, 500 MHz
[ 1,042059] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1,042059] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1,042059] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1,042059] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1,042059] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1,042059] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1,042059] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1,042059] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1,042059] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
[ 1,042059] acpicpu1 at cpu1: ACPI CPU
[ 1,042059] acpicpu2 at cpu2: ACPI CPU
[ 1,042059] coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
[ 1,042059] acpicpu3 at cpu3: ACPI CPU
[ 1,042059] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1,042059] timecounter: Timecounter "TSC" frequency 2294690000 Hz quality 3000
[ 1,276673] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1,312213] uhub0: 4 ports with 4 removable, self powered
[ 1,312213] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1,352213] uhub1: 11 ports with 11 removable, self powered
[ 1,352213] acpiacad0: AC adapter online.
[ 1,382217] acpibat0: Hewlett-Packard LIon rechargeable battery
[ 1,412213] acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah
[ 1,412213] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1,412213] uhub2: 3 ports with 3 removable, self powered
[ 1,412213] IPsec: Initialized Security Association Processing.
[ 1,462213] ahcisata0 port 3: device present, speed: 6.0Gb/s
[ 1,492213] ahcisata0 port 1: device present, speed: 6.0Gb/s
[ 1,552215] wd0 at atabus0 drive 0
[ 1,552215] wd0: <INTEL SSDSC2BF180A5H RSED>
[ 1,552215] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 1,552215] wd0: 167 GB, 348861 cyl, 16 head, 63 sec, 512 bytes/sect x 351651888 sectors
[ 1,562214] wd0: GPT GUID: 5e7f27e8-dd48-44a8-9d48-c798af9c55df
[ 1,562214] dk0 at wd0: "EFI system", 507904 blocks at 4096, type: msdos
[ 1,562214] dk1 at wd0: "NetBSD", 285212672 blocks at 512000, type: ffs
[ 1,562214] dk2 at wd0: "swap", 65925120 blocks at 285724672, type: swap
[ 1,562214] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
[ 1,562214] wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 1,562214] wd1 at atabus1 drive 0
[ 1,562214] wd1: <TS240GMTS420S>
[ 1,562214] wd1: drive supports 1-sector PIO transfers, LBA48 addressing
[ 1,562214] wd1: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
[ 1,562214] wd1: GPT GUID: a6699050-70f6-4d9b-aea8-71f8999f2ae8
[ 1,562214] dk3 at wd1: "HOME", 468856832 blocks at 4096, type: ffs
[ 1,572215] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 1,572215] wd1(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 1,792215] uhub3 at uhub0 port 3: SMSC (0x0424) USB5534B (0x5534), class 9/0, rev 3.00/60.80, addr 1
[ 1,822213] uhub3: 3 ports with 2 removable, self powered
[ 1,882215] uhub4 at uhub1 port 3: SMSC (0x0424) USB2134B (0x2134), class 9/0, rev 2.10/60.80, addr 2
[ 1,912213] uhub4: multiple transaction translators
[ 1,942213] uhub4: 3 ports with 2 removable, self powered
[ 2,462214] uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 8001 (0x8001), class 9/0, rev 2.00/0.03, addr 2
[ 2,462214] uhub5: single transaction translator
[ 2,462214] uhub5: 8 ports with 8 removable, self powered
[ 2,712214] uhidev0 at uhub4 port 2 configuration 1 interface 0
[ 2,752212] uhidev0: vendor 0461 (0x0461) HP Laser Mobile Mouse (0x4d62), rev 2.00/1.13, addr 3, iclass 3/1
[ 2,782212] uhidev0: 2 report ids
[ 2,812212] ums0 at uhidev0 reportid 1: 3 buttons, W and Z dirs
[ 2,852212] wsmouse1 at ums0 mux 0
[ 2,882212] uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0
[ 3,372213] ubt0 at uhub1 port 4
[ 3,402211] ubt0: vendor 8087 (0x8087) product 0a2a (0x0a2a), rev 2.01/0.01, addr 4
[ 3,902212] ugen0 at uhub1 port 5
[ 3,932210] ugen0: vendor 138a (0x138a) product 003f (0x003f), rev 1.10/1.04, addr 5
[ 4,492211] uvideo0 at uhub1 port 7 configuration 1 interface 0: Chicony Electronics Co.,Ltd. (0x04f2) HP HD Webcam (0xb477), rev 2.00/96.71, addr 6
[ 4,552210] video0 at uvideo0: Chicony Electronics Co.,Ltd. (0x04f2) HP HD Webcam (0xb477), rev 2.00/96.71, addr 6
[ 5,862210] sdmmc0: autoconfiguration error: couldn't enable card: 60
[ 5,892208] swwdog0: software watchdog initialized
[ 6,092207] WARNING: 2 errors while detecting hardware; check system log.
[ 6,102486] boot device: wd0
[ 6,102486] root device (default dk0): dk1
[ 8,153001] dump device: sdmmc0: autoconfiguration error: couldn't enable card: 60
[ 8,781231] file system (default generic): ffs
[ 10,104301] root on dk1
[ 10,292000] kern.module.path=/stand/amd64/10.0/modules
[ 10,296437] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[ 10,331997] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[ 10,371997] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[ 10,411998] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10,451997] Driver supports precise vblank timestamp query.
[ 10,481997] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[ 10,532024] i915drmkms0: interrupting at msi7 vec 0 (i915drmkms0)
[ 10,582000] iwm0: hw rev 0x180, fw ver 17.352738.0, address 64:80:99:dd:f4:19
[ 10,651998] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
[ 10,681996] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[ 12,231995] intelfb0 at i915drmkms0
[ 12,261995] DRM_I915_DEBUG enabled
[ 12,291995] DRM_I915_DEBUG_GEM enabled
[ 12,321995] intelfb0: framebuffer at 0xb0001000, size 1366x768, depth 32, stride 5504
[ 13,821992] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[ 13,961992] wsmux1: connecting to wsdisplay0
[ 14,141994] init path (default /sbin/init):
[ 23,571980] init: trying /sbin/init
[ 31,021970] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 31,021970] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 31,021970] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 31,021970] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 35,381966] acpibat0: normal capacity on 'charge state'
[ 53,111942] Accounting started
[ 53,301943] bthub0 at ubt0 local-bdaddr 64:80:99:dd:f4:1d
[ 53,311952] bthidev0 at bthub0 remote-bdaddr 00:1f:20:01:bc:25 link-mode auth
[ 53,311952] btms0 at bthidev0 reportid 2: 8 buttons, W and Z dirs.
[ 53,311952] wsmouse2 at btms0 mux 0
[ 53,311952] bthidev0: reportid 16 not configured
[ 58,442238] bthidev0: disconnected (64)
dmesg on NetBSD 9:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021, 2022
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022
mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8067 MB
avail memory = 7806 MB
WARNING: module error: module `msdos' pushed by boot loader already exists
cpu_rng: RDSEED
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0xbd<clock_battery,config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa a947ef18
Hewlett-Packard HP EliteBook 820 G2 (A3009D510303)
mainbus0 (root)
ACPI: RSDP 0x00000000A9FFE014 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000A9FFD0E8 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 0x00000000A9FFB000 00010C (v05 HPQOEM 225A 00000001 HP 00000001)
ACPI: DSDT 0x00000000A9FCF000 026A0D (v02 HPQOEM 225A 00000001 INTL 20130927)
ACPI: FACS 0x00000000A9F66000 000040
ACPI: HPET 0x00000000A9FFA000 000038 (v01 HPQOEM 225A 00000001 HP 00000001)
ACPI: APIC 0x00000000A9FF9000 0000BC (v01 HPQOEM 225A 00000001 HP 00000001)
ACPI: MCFG 0x00000000A9FF8000 00003C (v01 HPQOEM 225A 00000001 HP 00000001)
ACPI: TCPA 0x00000000A9FF6000 000032 (v02 HPQOEM 225A 00000000 HP 00000001)
ACPI: SSDT 0x00000000A9FCC000 0002D9 (v01 HPQOEM SataAhci 00001000 INTL 20130927)
ACPI: SSDT 0x00000000A9FCB000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20130927)
ACPI: SLIC 0x00000000A9FCA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: MSDM 0x00000000A9FC9000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
ACPI: FPDT 0x00000000A9FC8000 000044 (v01 HPQOEM 225A 00000001 HP 00000001)
ACPI: BGRT 0x00000000A9FC7000 000038 (v00 HPQOEM 225A 00000001 HP 00000001)
ACPI: SSDT 0x00000000A9FC3000 000544 (v02 PmRef Cpu0Ist 00003000 INTL 20130927)
ACPI: SSDT 0x00000000A9FC2000 000B8F (v02 CpuRef CpuSsdt 00003000 INTL 20130927)
ACPI: SSDT 0x00000000A9FC1000 0001D5 (v02 PmRef LakeTiny 00003000 INTL 20130927)
ACPI: SSDT 0x00000000A9FC0000 00092C (v02 SaSsdt SaSsdt 00003000 INTL 20130927)
ACPI: ASF! 0x00000000A9FF7000 0000A5 (v32 HPQOEM 225A 00000001 HP 00000001)
ACPI: DMAR 0x00000000A9FBF000 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 40 pins
x2APIC available but disabled by DMAR table
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF85E6044A3C08 0003F3 (v02 PmRef Cpu0Cst 00003001 INTL 20130927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF85E4C58C8808 0005DB (v02 PmRef ApIst 00003000 INTL 20130927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF85E4C58644C8 000119 (v02 PmRef ApCst 00003000 INTL 20130927)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
WLBU (HPQ6001) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout0: brightness levels: [0-67,69-100]
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, HPQ8002) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN3021) (aux port): irq 12
ACEL (HPQ6007) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-2): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
GTPM (IFX0102) at acpi0 not configured
acpitz0 at acpi0 (CPUZ)
acpitz0: levels: critical 128.0 C, hot 104.0 C, passive cooling
acpitz1 at acpi0 (GFXZ): cpu0
acpitz1: levels: critical 128.0 C, passive 105.0 C, passive cooling
acpitz2 at acpi0 (EXTZ)
acpitz2: levels: critical 128.0 C, passive cooling
acpitz3 at acpi0 (LOCZ)
acpitz3: levels: critical 128.0 C, passive cooling
acpitz4 at acpi0 (BATZ): cpu0
acpitz4: levels: critical 128.0 C, passive 55.0 C, passive cooling
acpitz5 at acpi0 (PCHZ)
acpitz5: levels: critical 128.0 C, passive cooling
acpitz6 at acpi0 (DM1Z)
acpitz6: levels: critical 128.0 C, passive cooling
acpitz7 at acpi0 (DM2Z)
acpitz7: levels: critical 128.0 C, passive cooling
PTID (INT340E) at acpi0 not configured
ACPI: Enabled 5 GPEs in block 00 to 7F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 1604 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 1616 (rev. 0x09)
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: autoconfiguration error: RIRB timeout
hdaudio0: autoconfiguration error: RIRB timeout
xhci0 at pci0 dev 20 function 0: vendor 8086 product 9cb1 (rev. 0x03)
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 9cba (miscellaneous communications, revision 0x03) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0, 64-bit DMA: I218 LM Ethernet Connection (rev. 0x03)
wm0: interrupting at msi2 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.2.4
wm0: Ethernet address 70:5a:0f:82:be:43
wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 5
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi3 vec 0
hdafg0 at hdaudio1: vendor 10ec product 0280
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 9c90 (rev. 0xe3)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 9c92 (rev. 0xe3)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
rtsx0 at pci2 dev 0 function 0: vendor 10ec product 5227 (rev. 0x01)
rtsx0: interrupting at msi4 vec 0
sdmmc0 at rtsx0
ppb2 at pci0 dev 28 function 3: vendor 8086 product 9c96 (rev. 0xe3)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwm0 at pci3 dev 0 function 0: vendor 8086 product 095a (rev. 0x48)
iwm0: interrupting at msi5 vec 0
ehci0 at pci0 dev 29 function 0: vendor 8086 product 9ca6 (rev. 0x03)
ehci0: interrupting at ioapic0 pin 17
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 9cc3 (rev. 0x03)
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 9c83 (rev. 0x03)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 3 ports, 32 slots, CAP 0xc734ff02<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi6 vec 0
atabus0 at ahcisata0 channel 1
atabus1 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 9ca2 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed40fff irq 7
tpm0: device 0x001a15d1 rev 0x10
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 230 us, pow 200 mW
acpicpu0: C3: FFH, lat 506 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 2301 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 15000 mW, 2300 MHz
acpicpu0: P2: FFH, lat 10 us, pow 14088 mW, 2200 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12462 mW, 2000 MHz
acpicpu0: P4: FFH, lat 10 us, pow 11745 mW, 1900 MHz
acpicpu0: P5: FFH, lat 10 us, pow 11042 mW, 1800 MHz
acpicpu0: P6: FFH, lat 10 us, pow 10215 mW, 1700 MHz
acpicpu0: P7: FFH, lat 10 us, pow 8882 mW, 1500 MHz
acpicpu0: P8: FFH, lat 10 us, pow 8101 mW, 1400 MHz
acpicpu0: P9: FFH, lat 10 us, pow 7471 mW, 1300 MHz
acpicpu0: P10: FFH, lat 10 us, pow 6121 mW, 1100 MHz
acpicpu0: P11: FFH, lat 10 us, pow 5531 mW, 1000 MHz
acpicpu0: P12: FFH, lat 10 us, pow 4955 mW, 900 MHz
acpicpu0: P13: FFH, lat 10 us, pow 4267 mW, 800 MHz
acpicpu0: P14: FFH, lat 10 us, pow 3182 mW, 600 MHz
acpicpu0: P15: FFH, lat 10 us, pow 2538 mW, 500 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2294854060 Hz quality 3000
acpiacad0: AC adapter online.
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 11 ports with 11 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2acpibat0: Hewlett-Packard LIon rechargeable battery
: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah
uhub2: 3 ports with 3 removable, self powered
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 3: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
uhub3 at uhub1 port 3: SMSC (0x424) USB2134B (0x2134), class 9/0, rev 2.10/60.80, addr 2
uhub3: multiple transaction translators
wd0: <INTEL SSDSC2BF180A5H RSED>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 167 GB, 348861 cyl, 16 head, 63 sec, 512 bytes/sect x 351651888 sectors
uhub4 at uhub0 port 3: SMSC (0x424) USB5534B (0x5534), class 9/0, rev 3.00/60.80, addr 1
uhub3: 3 ports with 2 removable, self powered
uhub4: 3 ports with 2 removable, self powered
wd0: GPT GUID: 5e7f27e8-dd48-44a8-9d48-c798af9c55df
dk0 at wd0: "EFI system", 507904 blocks at 4096, type: msdos
dk1 at wd0: "NetBSD", 285212672 blocks at 512000, type: ffs
dk2 at wd0: "swap", 65925120 blocks at 285724672, type: swap
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <TS240GMTS420S>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
wd1: GPT GUID: a6699050-70f6-4d9b-aea8-71f8999f2ae8
dk3 at wd1: "HOME", 468856832 blocks at 4096, type: ffs
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd1(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 8001 (0x8001), class 9/0, rev 2.00/0.03, addr 2
uhub5: single transaction translator
uhub5: 8 ports with 8 removable, self powered
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: vendor 0461 (0x461) HP Laser Mobile Mouse (0x4d62), rev 2.00/1.13, addr 3, iclass 3/1
uhidev0: 2 report ids
ums0 at uhidev0 reportid 1: 3 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0
ubt0 at uhub1 port 4
ubt0: vendor 8087 (0x8087) product 0a2a (0xa2a), rev 2.01/0.01, addr 4
sdmmc0: sdmmc_mem_enable failed with error 60
sdmmc0: autoconfiguration error: couldn't enable card: 60
ugen0 at uhub1 port 5
ugen0: vendor 138a (0x138a) product 003f (0x3f), rev 1.10/1.04, addr 5
uvideo0 at uhub1 port 7 configuration 1 interface 0: Chicony Electronics Co.,Ltd. (0x4f2) HP HD Webcam (0xb477), rev 2.00/96.71, addr 6
video0 at uvideo0: Chicony Electronics Co.,Ltd. (0x4f2) HP HD Webcam (0xb477), rev 2.00/96.71, addr 6
WARNING: 3 errors while detecting hardware; check system log.
boot device: wd0
root on dk1 dumps on dk2
root file system type: ffs
kern.module.path=/stand/amd64/9.3/modules
kern info: [drm] Memory usable by graphics device = 4096M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
kern info: [drm] failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffff8780af44c000, size 1366x768, depth 32, stride 5504
iwm0: hw rev 0x180, fw ver 17.352738.0, address 64:80:99:dd:f4:19
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
sdmmc0: sdmmc_mem_enable failed with error 60
sdmmc0: autoconfiguration error: couldn't enable card: 60
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
Accounting started
>How-To-Repeat:
Boot into NetBSD 10 daily kernel on a NetBSD 9.3 installation with boot NAME=NetBSD:netbsd-10
>Fix:
Boot into the NetBSD 10 daily kernel on a NetBSD 9.3 installation with boot NAME=NetBSD:netbsd-10 -a (see the "-a" flag)
>Audit-Trail:
From: Adrian =?UTF-8?B?S2llw58=?= <adrian@kiess.onl>
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: kern/57330: NetBSD 10 daily kernel does not boot by default by
choosing wrong root device
Date: Fri, 7 Apr 2023 15:43:55 +0200
Dear maintainers,
I fixed the described issue the way described below. Booting into the
NetBSD 10 kernel on NetBSD 9.3 userland now works too by default.
Solution:
gpt show -i 1 wd0
gpt show -i 2 wd0
gpt unset -i 1 -a biosboot,bootme wd0
gpt set -i 2 -a bootme wd0
gpt show -i 1 wd0
gpt show -i 2 wd0
Where, as: Partition 1 of wd0 is the EFI MSDOS boot "/efi" partition;
partition 2 of wd0 is the FFSv2 NetBSD root "/" partition.
Before partition 1 of wd0 was wrongly marked with the bootme and
biosboot flag, I did this wrongly during sysinst installation time.
Thanks for your kind attention.
Sincerely,
Adrian Kieß
On Fri, 7 Apr 2023 13:15:00 +0000 (UTC)
gnats-admin@netbsd.org wrote:
> Thank you very much for your problem report.
> It has the internal identification `kern/57330'.
> The individual assigned to look at your
> report is: kern-bug-people.
>
> >Category: kern
> >Responsible: kern-bug-people
> >Synopsis: NetBSD 10 daily kernel chooses wrong root device
> >Arrival-Date: Fri Apr 07 13:15:00 +0000 2023
>
--
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.47 2022/09/11 19:34:41 kim Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2023
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.
Home