NetBSD Problem Report #57591
From he@smistad.uninett.no Mon Aug 21 16:04:32 2023
Return-Path: <he@smistad.uninett.no>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
by mollari.NetBSD.org (Postfix) with ESMTPS id 01AEB1A9238
for <gnats-bugs@gnats.NetBSD.org>; Mon, 21 Aug 2023 16:04:31 +0000 (UTC)
Message-Id: <20230821160351.CC2DB43ED1D@smistad.uninett.no>
Date: Mon, 21 Aug 2023 18:03:51 +0200 (CEST)
From: he@NetBSD.org
Reply-To: he@NetBSD.org
To: gnats-bugs@NetBSD.org
Subject: i915 graphics console goes blank during boot
X-Send-Pr-Version: 3.95
>Number: 57591
>Category: bin
>Synopsis: i915 graphics console goes blank during boot
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: bin-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Mon Aug 21 16:05:00 +0000 2023
>Last-Modified: Mon Aug 21 17:35:01 +0000 2023
>Originator: Havard Eidnes
>Release: NetBSD 10.0_BETA
>Organization:
I try...
>Environment:
System: NetBSD smistad.uninett.no 10.0_BETA NetBSD 10.0_BETA (GENERIC) #0: Fri Aug 18 12:52:31 UTC 2023 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
Architecture: x86_64
Machine: amd64
>Description:
Booting this PC (HP EliteDesk 800 G1 SFF) which has an i7-4790
CPU and uses the built-in graphics hardware gives one of two
results:
1) with the VGA screen as console, the two screens I have
connected both go blank and enter "energy save mode" before
the boot completes
2) with a serial console, the boot succeeds, and I get a login
prompt on both screens, and X11 can be started the usual
way after login (I'm old-fashioned and use startx).
Incidently, this was the state of NetBSD 10.0_BETA as of Thu
Jan 12, but it remains as current behaviour with this recent
NetBSD 10.0_BETA from Fri Aug 18.
Given that the screen goes blank, it's a little hard to tell
if the kernel has crashed or whether this only affects the
screen output (although I could perhaps wait to see if the
network is configured...).
>How-To-Repeat:
Try to boot recent 10.0_BETA on similar hardware, watch it
fail if VGA is the console.
>Fix:
Boot using serial console appears to be a workaround in this
case, but there must be lots of systems around where that is
at best a cumbersome or worst impossible workaround.
dmesg from this system follows below. This is with just the
kernel upgraded (so possibly somewhat dated graphics
firmware?), I will shortly also upgrade user-land.
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 10.0_BETA (GENERIC) #0: Fri Aug 18 12:52:31 UTC 2023
[ 1.000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 24466 MB
[ 1.000000] avail memory = 23647 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] RTC BIOS diagnostic error 0x30<config_unit,memory_size>
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000000F9810 000024 (v02 HPQOEM)
[ 1.000004] ACPI: XSDT 0x00000000D98FD090 00009C (v01 HPQOEM SLIC-BPC 20150713 AMI 00010013)
[ 1.000004] ACPI: FACP 0x00000000D990B000 00010C (v05 HPQOEM SLIC-BPC 20150713 AMI 00010013)
[ 1.000004] ACPI: DSDT 0x00000000D98FD1B8 00DE46 (v02 HPQOEM SLIC-BPC 00000001 INTL 20091112)
[ 1.000004] ACPI: FACS 0x00000000D9A06080 000040
[ 1.000004] ACPI: APIC 0x00000000D990B110 000092 (v03 HPQOEM SLIC-BPC 20150713 AMI 00010013)
[ 1.000004] ACPI: FPDT 0x00000000D990B1A8 000044 (v01 HPQOEM SLIC-BPC 20150713 AMI 00010013)
[ 1.000004] ACPI: SSDT 0x00000000D990B1F0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 1.000004] ACPI: SSDT 0x00000000D990B730 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 1.000004] ACPI: SSDT 0x00000000D990C208 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711)
[ 1.000004] ACPI: MCFG 0x00000000D990C3D0 00003C (v01 HPQOEM SLIC-BPC 20150713 MSFT 00000097)
[ 1.000004] ACPI: HPET 0x00000000D990C410 000038 (v01 HPQOEM SLIC-BPC 20150713 AMI. 00000005)
[ 1.000004] ACPI: SSDT 0x00000000D990C448 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 1.000004] ACPI: SSDT 0x00000000D990C7B8 00348C (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 1.000004] ACPI: SSDT 0x00000000D990FC48 00668F (v01 COMPAQ WMI 00000001 MSFT 03000001)
[ 1.000004] ACPI: SLIC 0x00000000D99162D8 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 1.000004] ACPI: MSDM 0x00000000D9916450 000055 (v03 HPQOEM SLIC-BPC 20150713 HPQ 00010013)
[ 1.000004] ACPI: ASF! 0x00000000D99164A8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 1.000004] ACPI: TCPA 0x00000000D9916550 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
[ 1.000004] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, id 0x306c3
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 2
[ 1.000004] cpu1: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, id 0x306c3
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0
[ 1.000004] cpu2 at mainbus0 apid 4
[ 1.000004] cpu2: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, id 0x306c3
[ 1.000004] cpu2: node 0, package 0, core 2, smt 0
[ 1.000004] cpu3 at mainbus0 apid 6
[ 1.000004] cpu3: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, id 0x306c3
[ 1.000004] cpu3: node 0, package 0, core 3, smt 0
[ 1.000004] cpu4 at mainbus0 apid 1
[ 1.000004] cpu4: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, id 0x306c3
[ 1.000004] cpu4: node 0, package 0, core 0, smt 1
[ 1.000004] cpu5 at mainbus0 apid 3
[ 1.000004] cpu5: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, id 0x306c3
[ 1.000004] cpu5: node 0, package 0, core 1, smt 1
[ 1.000004] cpu6 at mainbus0 apid 5
[ 1.000004] cpu6: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, id 0x306c3
[ 1.000004] cpu6: node 0, package 0, core 2, smt 1
[ 1.000004] cpu7 at mainbus0 apid 7
[ 1.000004] cpu7: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, id 0x306c3
[ 1.000004] cpu7: node 0, package 0, core 3, smt 1
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,20150713>, AslId <AMI ,00010013>
[ 1.000004] acpi0: autoconfiguration error: invalid PCI address for LCD
[ 1.000004] mpacpi: PCI bus 2 int routing already done!
[ 1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFE089A1E36048 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFE084B4D49808 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFE084B4CD81C8 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.050176] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.050176] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.139434] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
[ 1.139434] TPMX (PNP0C01) at acpi0 not configured
[ 1.139434] FWHD (INT0800) at acpi0 not configured
[ 1.139434] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
[ 1.139434] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
[ 1.139434] pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): io 0x60,0x64 irq 12
[ 1.139434] com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
[ 1.139434] com0: ns16550a, 16-byte FIFO
[ 1.139434] com0: console
[ 1.139434] tpm0 at acpi0 (TPM, IFX0102-1): mem 0xfed40000-0xfed44fff
[ 1.139434] tpm0: device 0x000b15d1 rev 0x10
[ 1.139434] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.139434] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
[ 1.139434] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
[ 1.139434] acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
[ 1.139434] acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
[ 1.139434] acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
[ 1.139434] acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
[ 1.139434] acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
[ 1.139434] acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
[ 1.139434] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
[ 1.139434] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
[ 1.139434] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
[ 1.139434] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
[ 1.139434] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
[ 1.139434] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
[ 1.139434] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
[ 1.139434] acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
[ 1.139434] acpiout15: brightness levels: [0-100]
[ 1.139434] acpiout16 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
[ 1.139434] acpiout16: brightness levels: [0-100]
[ 1.139434] acpivga0: connected output devices:
[ 1.139434] acpivga0: 0x0110 (acpiout16): LCD Panel, head 0
[ 1.139434] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
[ 1.139434] acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
[ 1.139434] wmihp0 at acpiwmi0: HP WMI mappings
[ 1.139434] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[ 1.139434] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
[ 1.139434] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
[ 1.139434] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
[ 1.139434] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
[ 1.139434] acpitz0 at acpi0 (TZ00)
[ 1.139434] acpitz0: active cooling level 0: 80.0C
[ 1.139434] acpitz0: active cooling level 1: 55.0C
[ 1.139434] acpitz0: active cooling level 2: 0.0C
[ 1.139434] acpitz0: active cooling level 3: 0.0C
[ 1.139434] acpitz0: active cooling level 4: 0.0C
[ 1.139434] acpitz0: levels: critical 105.0 C
[ 1.139434] acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
[ 1.139434] acpitz1: levels: critical 105.0 C, passive 108.0 C, passive cooling
[ 1.139434] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 1.139434] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.139434] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.139434] pchb0 at pci0 dev 0 function 0: Intel Haswell Host Bridge, DRAM (rev. 0x06)
[ 1.139434] ppb0 at pci0 dev 1 function 0: Intel Haswell PCI-E x16 Controller (rev. 0x06)
[ 1.139434] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
[ 1.139434] pci1 at ppb0 bus 1
[ 1.139434] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.139434] ppb1 at pci1 dev 0 function 0: IDT product 8018 (rev. 0x0e)
[ 1.139434] ppb1: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
[ 1.139434] pci2 at ppb1 bus 2
[ 1.139434] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.139434] ppb2 at pci2 dev 2 function 0: IDT product 8018 (rev. 0x0e)
[ 1.139434] ppb2: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.139434] pci3 at ppb2 bus 3
[ 1.139434] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.139434] wm0 at pci3 dev 0 function 0, 64-bit DMA: Intel PRO/1000 PT Quad Port Server Adapter (rev. 0x06)
[ 1.139434] wm0: interrupting at ioapic0 pin 19
[ 1.139434] wm0: PCI-Express bus
[ 1.139434] wm0: 4096 words (16 address bits) SPI EEPROM, version 5.12.2, Image Unique ID 0000ffff
[ 1.139434] wm0: ASPM L1 is disabled to workaround the errata.
[ 1.139434] wm0: Ethernet address 00:26:55:e1:20:91
[ 1.139434] wm0: 0x24040<SPI,PCIE,ASF_FIRM>
[ 1.139434] igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
[ 1.139434] igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.139434] wm1 at pci3 dev 0 function 1, 64-bit DMA: Intel PRO/1000 PT Quad Port Server Adapter (rev. 0x06)
[ 1.139434] wm1: interrupting at ioapic0 pin 18
[ 1.139434] wm1: PCI-Express bus
[ 1.139434] wm1: 4096 words (16 address bits) SPI EEPROM, version 5.12.2, Image Unique ID 0000ffff
[ 1.139434] wm1: ASPM L1 is disabled to workaround the errata.
[ 1.139434] wm1: Ethernet address 00:26:55:e1:20:90
[ 1.139434] wm1: 0x24040<SPI,PCIE,ASF_FIRM>
[ 1.139434] igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
[ 1.139434] igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.139434] ppb3 at pci2 dev 4 function 0: IDT product 8018 (rev. 0x0e)
[ 1.139434] ppb3: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.139434] pci4 at ppb3 bus 4
[ 1.139434] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.139434] wm2 at pci4 dev 0 function 0, 64-bit DMA: Intel PRO/1000 PT Quad Port Server Adapter (rev. 0x06)
[ 1.139434] wm2: interrupting at ioapic0 pin 17
[ 1.139434] wm2: PCI-Express bus
[ 1.139434] wm2: 4096 words (16 address bits) SPI EEPROM, version 5.12.2, Image Unique ID 0000ffff
[ 1.139434] wm2: ASPM L1 is disabled to workaround the errata.
[ 1.139434] wm2: Ethernet address 00:26:55:e1:20:93
[ 1.139434] wm2: 0x24040<SPI,PCIE,ASF_FIRM>
[ 1.139434] igphy2 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
[ 1.139434] igphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.139434] wm3 at pci4 dev 0 function 1, 64-bit DMA: Intel PRO/1000 PT Quad Port Server Adapter (rev. 0x06)
[ 1.139434] wm3: interrupting at ioapic0 pin 16
[ 1.139434] wm3: PCI-Express bus
[ 1.139434] wm3: 4096 words (16 address bits) SPI EEPROM, version 5.12.2, Image Unique ID 0000ffff
[ 1.139434] wm3: ASPM L1 is disabled to workaround the errata.
[ 1.139434] wm3: Ethernet address 00:26:55:e1:20:92
[ 1.139434] wm3: 0x24040<SPI,PCIE,ASF_FIRM>
[ 1.139434] igphy3 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
[ 1.139434] igphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.139434] i915drmkms0 at pci0 dev 2 function 0: Intel Haswell Integrated Graphics Device (rev. 0x06)
[ 1.139434] hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
[ 1.139434] hdaudio0: interrupting at msi0 vec 0
[ 1.139434] hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
[ 1.139434] hdafg0 at hdaudio0: Intel HDMI/DP
[ 1.139434] hdafg0: DP00 8ch: Digital Out [Jack]
[ 1.139434] hdafg0: 8ch/0ch 48000Hz PCM16*
[ 1.139434] audio0 at hdafg0: playback
[ 1.139434] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.139434] spkr0 at audio0: PC Speaker (synthesized)
[ 1.139434] wsbell at spkr0 not configured
[ 1.139434] xhci0 at pci0 dev 20 function 0: Intel 8 Series USB xHCI (rev. 0x04)
[ 1.139434] xhci0: 64-bit DMA
[ 1.139434] xhci0: interrupting at msi1 vec 0
[ 1.139434] xhci0: xHCI version 1.0
[ 1.139434] usb0 at xhci0: USB revision 3.0
[ 1.139434] usb1 at xhci0: USB revision 2.0
[ 1.139434] Intel 8 Series MEI Controller (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
[ 1.139434] puc0 at pci0 dev 22 function 3: Intel 8 Series KT (com)
[ 1.139434] com2 at puc0 port 0 (16550-compatible): ioaddr 0xf0e0, interrupting at ioapic0 pin 19
[ 1.139434] com2: ns16550a, 16-byte FIFO
[ 1.139434] wm4 at pci0 dev 25 function 0, 64-bit DMA: I217 LM Ethernet Connection (rev. 0x04)
[ 1.139434] wm4: interrupting at msi2 vec 0
[ 1.139434] wm4: PCI-Express bus
[ 1.139434] wm4: 2048 words FLASH, version 0.13.4
[ 1.139434] wm4: Ethernet address ec:b1:d7:59:fb:aa
[ 1.139434] wm4: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
[ 1.139434] ihphy0 at wm4 phy 2: i217 10/100/1000 media interface, rev. 4
[ 1.139434] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.139434] ehci0 at pci0 dev 26 function 0: Intel 8 Series USB EHCI (rev. 0x04)
[ 1.139434] ehci0: 64-bit DMA
[ 1.139434] ehci0: interrupting at ioapic0 pin 16
[ 1.139434] ehci0: BIOS has given up ownership
[ 1.139434] ehci0: EHCI version 1.0
[ 1.139434] ehci0: Using DMA subregion for control data structures
[ 1.139434] usb2 at ehci0: USB revision 2.0
[ 1.139434] hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
[ 1.139434] hdaudio1: interrupting at msi3 vec 0
[ 1.139434] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.139434] hdafg1 at hdaudio1: Realtek product 0221
[ 1.139434] hdafg1: DAC00 2ch: Speaker [Built-In]
[ 1.139434] hdafg1: DAC01 2ch: Speaker [Jack], HP Out [Jack]
[ 1.139434] hdafg1: ADC02 2ch: Line In [Jack], Mic In [Jack]
[ 1.139434] hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[ 1.139434] audio1 at hdafg1: playback, capture, full duplex, independent
[ 1.139434] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.139434] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.139434] spkr1 at audio1: PC Speaker (synthesized)
[ 1.139434] wsbell at spkr1 not configured
[ 1.139434] ehci1 at pci0 dev 29 function 0: Intel 8 Series USB EHCI (rev. 0x04)
[ 1.139434] ehci1: 64-bit DMA
[ 1.139434] ehci1: interrupting at ioapic0 pin 23
[ 1.139434] ehci1: BIOS has given up ownership
[ 1.139434] ehci1: EHCI version 1.0
[ 1.139434] ehci1: Using DMA subregion for control data structures
[ 1.139434] usb3 at ehci1: USB revision 2.0
[ 1.139434] ichlpcib0 at pci0 dev 31 function 0: Intel Q87 LPC (rev. 0x04)
[ 1.139434] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[ 1.139434] ichlpcib0: 24-bit timer
[ 1.139434] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.139434] tco0: Min/Max interval 1/367 seconds
[ 1.139434] ahcisata0 at pci0 dev 31 function 2: Intel 8 Series (desktop) SATA Controller (AHCI) (rev. 0x04)
[ 1.139434] ahcisata0: 64-bit DMA
[ 1.139434] ahcisata0: AHCI revision 1.30, 5 ports, 32 slots, CAP 0xc730ff44<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
[ 1.139434] ahcisata0: interrupting at msi4 vec 0
[ 1.139434] atabus0 at ahcisata0 channel 0
[ 1.139434] atabus1 at ahcisata0 channel 2
[ 1.139434] ichsmb0 at pci0 dev 31 function 3: Intel 8 Series SMBus Controller (rev. 0x04)
[ 1.139434] ichsmb0: interrupting at ioapic0 pin 18
[ 1.139434] iic0 at ichsmb0: I2C bus
[ 1.139434] isa0 at ichlpcib0
[ 1.139434] pcppi0 at isa0 port 0x61
[ 1.139434] spkr2 at pcppi0: PC Speaker
[ 1.139434] wsbell at spkr2 not configured
[ 1.139434] midi0 at pcppi0: PC speaker
[ 1.139434] sysbeep0 at pcppi0
[ 1.139434] attimer1: attached to pcppi0
[ 1.139434] acpicpu0 at cpu0: ACPI CPU
[ 1.139434] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.139434] acpicpu0: C2: FFH, lat 148 us, pow 200 mW
[ 1.139434] acpicpu0: P0: FFH, lat 10 us, pow 84000 mW, 3601 MHz, turbo boost
[ 1.139434] acpicpu0: P1: FFH, lat 10 us, pow 84000 mW, 3600 MHz
[ 1.139434] acpicpu0: P2: FFH, lat 10 us, pow 77169 mW, 3400 MHz
[ 1.139434] acpicpu0: P3: FFH, lat 10 us, pow 70587 mW, 3200 MHz
[ 1.139434] acpicpu0: P4: FFH, lat 10 us, pow 65046 mW, 3000 MHz
[ 1.139434] acpicpu0: P5: FFH, lat 10 us, pow 58928 mW, 2800 MHz
[ 1.139434] acpicpu0: P6: FFH, lat 10 us, pow 53793 mW, 2600 MHz
[ 1.139434] acpicpu0: P7: FFH, lat 10 us, pow 48135 mW, 2400 MHz
[ 1.139434] acpicpu0: P8: FFH, lat 10 us, pow 43407 mW, 2200 MHz
[ 1.139434] acpicpu0: P9: FFH, lat 10 us, pow 38174 mW, 2000 MHz
[ 1.139434] acpicpu0: P10: FFH, lat 10 us, pow 33846 mW, 1800 MHz
[ 1.139434] acpicpu0: P11: FFH, lat 10 us, pow 29033 mW, 1600 MHz
[ 1.139434] acpicpu0: P12: FFH, lat 10 us, pow 24438 mW, 1400 MHz
[ 1.139434] acpicpu0: P13: FFH, lat 10 us, pow 20673 mW, 1200 MHz
[ 1.139434] acpicpu0: P14: FFH, lat 10 us, pow 16471 mW, 1000 MHz
[ 1.139434] acpicpu0: P15: FFH, lat 10 us, pow 13067 mW, 800 MHz
[ 1.139434] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[ 1.139434] acpicpu1 at cpu1: ACPI CPU
[ 1.139434] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
[ 1.139434] acpicpu2 at cpu2: ACPI CPU
[ 1.139434] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
[ 1.139434] acpicpu3 at cpu3: ACPI CPU
[ 1.139434] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
[ 1.139434] acpicpu4 at cpu4: ACPI CPU
[ 1.139434] acpicpu5 at cpu5: ACPI CPU
[ 1.139434] acpicpu6 at cpu6: ACPI CPU
[ 1.139434] acpicpu7 at cpu7: ACPI CPU
[ 1.139434] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.139434] timecounter: Timecounter "TSC" frequency 3591683000 Hz quality 3000
[ 1.885127] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.987343] uhub0: 6 ports with 6 removable, self powered
[ 1.987343] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 2.097343] uhub1: 15 ports with 15 removable, self powered
[ 2.097343] IPsec: Initialized Security Association Processing.
[ 2.107343] uhub2 at usb3tpm0: read 8 bytes, expected 10
[ 2.137343] : NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 2.174461] tpm0: uhub2: 3 ports with 3 removable, self powered
[ 2.290977] deactivating entropy source
[ 2.336755] uhub3 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 2.437343] uhub3: 3 ports with 3 removable, self powered
[ 2.487345] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 2.547343] ahcisata0 port 2: device present, speed: 1.5Gb/s
[ 2.777345] uhub4 at uhub1 port 4: Generic (0x0bda) 4-Port USB 2.0 Hub (0x5411), class 9/0, rev 2.10/1.23, addr 1
[ 2.897343] uhub4: multiple transaction translators
[ 2.967345] uhub4: 4 ports with 4 removable, self powered
[ 3.477345] uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 8000 (0x8000), class 9/0, rev 2.00/0.04, addr 2
[ 3.597343] uhub5: single transaction translator
[ 3.647343] uhub6 at uhub3 port 1: vendor 8087 (0x8087) product 8008 (0x8008), class 9/0, rev 2.00/0.04, addr 2
[ 3.775524] uhub6: single transaction translator
[ 3.830621] uhub5: 8 ports with 8 removable, self powered
[ 3.830621] uhub6: 6 ports with 6 removable, self powered
[ 3.877345] uhidev0 at uhub4 port 3 configuration 1 interface 0
[ 3.937344] uhidev0: DELL (0x413c) Dell USB Entry Keyboard (0x2107), rev 1.10/1.78, addr 2, iclass 3/1
[ 4.057344] ukbd0 at uhidev0
[ 4.087344] wskbd0 at ukbd0 mux 1
[ 4.147345] wd0 at atabus0 drive 0
[ 4.237345] wd0: <ST1000LM014-1EJ164-SSHD>
[ 4.284618] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 4.284618] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 4.507345] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), NCQ (32 tags)
[ 4.507345] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
[ 4.507345] atapibus0 at atabus1: 1 targets
[ 4.567344] cd0 at atapibus0 drive 0: <hp CDDVDW SN-208FB, S11P6YBG40016X, HJ10> cdrom removable
[ 4.677344] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[ 4.677344] cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[ 4.687346] uhidev1 at uhub4 port 4 configuration 1 interface 0
[ 4.758683] uhidev1: Logitech (0x046d) USB-PS/2 Optical Mouse (0xc043), rev 2.00/27.20, addr 3, iclass 3/1
[ 4.877346] ums0 at uhidev1: 8 buttons, W and Z dirs
[ 4.936999] wsmouse0 at ums0 mux 0
[ 4.977562] swwdog0: software watchdog initialized
[ 5.027344] WARNING: 1 error while detecting hardware; check system log.
[ 5.107344] boot device: wd0
[ 5.147344] root on wd0a dumps on wd0b
[ 5.217357] root file system type: ffs
[ 5.267346] kern.module.path=/stand/amd64/10.0/modules
[ 5.329971] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.407344] [drm] Driver supports precise vblank timestamp query.
[ 5.477344] i915drmkms0: interrupting at msi5 vec 0 (i915drmkms0)
[ 5.557346] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
[ 5.687344] i915drmkms0: [drm] Cannot find any crtc or sizes
[ 5.758443] [drm] DRM_I915_DEBUG enabled
[ 5.807344] [drm] DRM_I915_DEBUG_GEM enabled
[ 5.967344] intelfb0 at i915drmkms0
[ 6.007344] intelfb0: framebuffer at 0xe0009000, size 2560x1440, depth 32, stride 10240
[ 6.077345] wsdisplay0 at intelfb0 kbdmux 1
[ 6.124813] wsmux1: connecting to wsdisplay0
[ 6.124813] wskbd0: connecting to wsdisplay0
[ 16.357347] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 16.367347] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 16.367347] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 16.367347] wsdisplay0: screen 4 added (default, vt100 emulation)
>Audit-Trail:
From: Havard Eidnes <he@NetBSD.org>
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: bin/57591: i915 graphics console goes blank during boot
Date: Mon, 21 Aug 2023 19:32:51 +0200 (CEST)
Hi,
short update, on hint from martin@, I tried booting with
console=VGA and turning off the two flat panel screens connected
to my PC just after pressing enter to the "boot netbsd.new"
command in the boot loader CLI.
I also waited long enough that the PC would normally have come up
and configured the network, and it did not become reachable, so
this is a fairly strong indication that the kernel has crashed.
Annoyingly, this doesn't reproduce when I boot the same kernel
with console=serial, and since the screen goes blank it's really
difficult to provide any more precise error message.
Regards,
- Havard
(Contact us)
$NetBSD: query-full-pr,v 1.47 2022/09/11 19:34:41 kim Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2023
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.
Home