NetBSD Problem Report #10141

Received: (qmail 2047 invoked from network); 17 May 2000 19:17:45 -0000
Message-Id: <200005171917.e4HJHi100344@setup.cs.umn.edu>
Date: Wed, 17 May 2000 14:17:44 -0500 (CDT)
From: dokas@cs.umn.edu
Reply-To: dokas@cs.umn.edu
To: gnats-bugs@gnats.netbsd.org
Subject: fxp bug(?) on large PCs
X-Send-Pr-Version: 3.95

>Number:         10141
>Category:       port-i386
>Synopsis:       'fxp0: dmasync timeout' messages
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    jhawk
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed May 17 19:18:01 +0000 2000
>Closed-Date:    Fri May 19 16:03:16 +0000 2000
>Last-Modified:  Fri May 19 16:03:16 +0000 2000
>Originator:     Paul Dokas
>Release:        NetBSD-current May 17, 2000
>Organization:
	University of Minnesota, Dept of Computer Science
>Environment:

System: NetBSD setup 1.4Y NetBSD 1.4Y (NEXUS) #0: Wed May 17 10:12:33 CDT 2000 root@setup:/usr/src/sys/arch/i386/compile/NEXUS i386


>Description:
	I've got a Dell PowerEdge 2400 with a built in fxp ethernet adapter.
	Starting with yesterday's -current (May 16), I've started getting lots
        of the following messages:

	  fxp0: dmasync timeout

	at a rate of about 1 per 15 seconds.


	Here's the dmesg output for this machine:

May 17 12:59:23 setup /netbsd: NetBSD 1.4Y (NEXUS) #0: Wed May 17 10:12:33 CDT 2000
May 17 12:59:23 setup /netbsd:     root@setup:/usr/src/sys/arch/i386/compile/NEXUS
May 17 12:59:23 setup /netbsd: cpu0: family 6 model 8 step 1
May 17 12:59:23 setup /netbsd: cpu0: Intel Pentium III (E) (686-class)
May 17 12:59:23 setup /netbsd: total memory = 511 MB
May 17 12:59:23 setup /netbsd: avail memory = 471 MB
May 17 12:59:23 setup /netbsd: using 4870 buffers containing 26296 KB of memory
May 17 12:59:23 setup /netbsd: BIOS32 rev. 0 found at 0xffe90
May 17 12:59:23 setup /netbsd: PCI BIOS rev. 2.1 found at 0xfc7ee
May 17 12:59:23 setup /netbsd: pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
May 17 12:59:23 setup /netbsd: PCI IRQ Routing Table rev. 1.0 found at 0xfc330, size 208 bytes (11 entries)
May 17 12:59:23 setup /netbsd: PCI Interrupt Router at 000:15:0 (Pequr Technology product 0x0200)
May 17 12:59:23 setup /netbsd: pci_intr_fixup: no compatible PCI ICU found
May 17 12:59:23 setup /netbsd: Warning: unable to fix up PCI interrupt routing
May 17 12:59:23 setup /netbsd: PCI bridge 0: primary 0, secondary 1, subordinate 1
May 17 12:59:24 setup /netbsd: PCI bus #1 is the last bus
May 17 12:59:24 setup /netbsd: [System BIOS Setting]-----------------------
May 17 12:59:24 setup /netbsd:   device vendor product
May 17 12:59:24 setup /netbsd:   register space address    size       mask
May 17 12:59:24 setup /netbsd: --------------------------------------------
May 17 12:59:24 setup /netbsd: 000:00:0 0x1166 0x0009 
May 17 12:59:24 setup /netbsd:          [OK]
May 17 12:59:24 setup /netbsd: 000:00:1 0x1166 0x0009 
May 17 12:59:24 setup /netbsd:          [OK]
May 17 12:59:24 setup /netbsd: 000:02:0 0x8086 0x0962 
May 17 12:59:24 setup /netbsd:          [OK]
May 17 12:59:24 setup /netbsd: 000:08:0 0x8086 0x1229 
May 17 12:59:24 setup /netbsd:  10h mem  0xfe102000 0x00001000 0
May 17 12:59:24 setup /netbsd:  14h port 0x0000ecc0 0x00000040 1
May 17 12:59:24 setup /netbsd:  18h mem  0xfe000000 0x00100000 0
May 17 12:59:24 setup /netbsd:          [OK]
May 17 12:59:24 setup /netbsd: 000:14:0 0x1002 0x4759 
May 17 12:59:24 setup /netbsd:  10h mem  0xf8000000 0x01000000 8
May 17 12:59:24 setup /netbsd:  14h port 0x0000e800 0x00000100 1
May 17 12:59:25 setup /netbsd:  18h mem  0xfe101000 0x00001000 0
May 17 12:59:25 setup /netbsd:          [OK]
May 17 12:59:25 setup /netbsd: 000:15:0 0x1166 0x0200 
May 17 12:59:25 setup /netbsd:          [OK]
May 17 12:59:25 setup /netbsd: --------------------------[  0 devices bogus]
May 17 12:59:25 setup /netbsd:  Physical memory end: 0x1fffb000
May 17 12:59:25 setup /netbsd:  PCI memory mapped I/O space start: 0x20000000
May 17 12:59:25 setup /netbsd: [PCIBIOS fixup stage]-----------------------
May 17 12:59:25 setup /netbsd:   device vendor product
May 17 12:59:25 setup /netbsd:   register space address    size       mask
May 17 12:59:25 setup /netbsd: --------------------------------------------
May 17 12:59:25 setup /netbsd: 000:00:0 0x1166 0x0009 
May 17 12:59:25 setup /netbsd:          [OK]
May 17 12:59:25 setup /netbsd: 000:00:1 0x1166 0x0009 
May 17 12:59:25 setup /netbsd:          [OK]
May 17 12:59:25 setup /netbsd: 000:02:0 0x8086 0x0962 
May 17 12:59:25 setup /netbsd:          [OK]
May 17 12:59:25 setup /netbsd: 000:08:0 0x8086 0x1229 
May 17 12:59:25 setup /netbsd:  10h mem  0xfe102000 0x00001000 0
May 17 12:59:25 setup /netbsd:  14h port 0x0000ecc0 0x00000040 1
May 17 12:59:25 setup /netbsd:  18h mem  0xfe000000 0x00100000 0
May 17 12:59:25 setup /netbsd:          [OK]
May 17 12:59:25 setup /netbsd: 000:14:0 0x1002 0x4759 
May 17 12:59:25 setup /netbsd:  10h mem  0xf8000000 0x01000000 8
May 17 12:59:25 setup /netbsd:  14h port 0x0000e800 0x00000100 1
May 17 12:59:25 setup /netbsd:  18h mem  0xfe101000 0x00001000 0
May 17 12:59:25 setup /netbsd:          [OK]
May 17 12:59:25 setup /netbsd: 000:15:0 0x1166 0x0200 
May 17 12:59:25 setup /netbsd:          [OK]
May 17 12:59:25 setup /netbsd: --------------------------[  0 devices bogus]
May 17 12:59:25 setup /netbsd: mainbus0 (root)
May 17 12:59:25 setup /netbsd: pnpbios0 at mainbus0: code f0000, data 40, entry e2f4, control 0 eventp 0
May 17 12:59:25 setup /netbsd: pnpbios0: nodes 17, max len 248
May 17 12:59:25 setup /netbsd: PNP0C02 (mem 0-9ffff 100000-1fffdfff ffe00000-ffffffff f0000-fffff, io 800-83f 580-58f 62-63 65-6f e0-ef 2c00-2c7f, irq 15) at pnpbios0 index 0 ignored
May 17 12:59:25 setup /netbsd: com2 at pnpbios0 index 1 (PNP0501)
May 17 12:59:25 setup /netbsd: com2: io 3f8-3ff, irq 4
May 17 12:59:25 setup /netbsd: com2: ns16550a, working fifo
May 17 12:59:25 setup /netbsd: com3 at pnpbios0 index 2 (PNP0501)
May 17 12:59:25 setup /netbsd: com3: io 2f8-2ff, irq 3
May 17 12:59:25 setup /netbsd: com3: ns16550a, working fifo
May 17 12:59:25 setup /netbsd: lpt1 at pnpbios0 index 3 (PNP0401)
May 17 12:59:25 setup /netbsd: lpt1: io 378-37f 778-77b, irq 7
May 17 12:59:25 setup /netbsd: PNP0700 (io 3f0-3f5, irq 6, dma 2) at pnpbios0 index 4 ignored
May 17 12:59:25 setup /netbsd: PNP0F13 (irq 12) at pnpbios0 index 5 ignored
May 17 12:59:25 setup /netbsd: PNP0A03 (io cf8-cff) at pnpbios0 index 6 ignored
May 17 12:59:25 setup /netbsd: PNP0C02 (irq 9) at pnpbios0 index 7 ignored
May 17 12:59:25 setup /netbsd: PNP0000 (io 20-3f a0-bf 4d0-4d1, irq 2) at pnpbios0 index 8 ignored
May 17 12:59:26 setup /netbsd: PNP0003 (mem fee00000-fee0ffff fec00000-fec0ffff) at pnpbios0 index 9 ignored
May 17 12:59:26 setup /netbsd: PNP0100 (io 40-5f, irq 0) at pnpbios0 index 10 ignored
May 17 12:59:26 setup /netbsd: PNP0200 (io 80-9f 0-1f c0-df, dma 4) at pnpbios0 index 11 ignored
May 17 12:59:26 setup /netbsd: PNP0303 (io 60 64, irq 1) at pnpbios0 index 12 ignored
May 17 12:59:26 setup /netbsd: PNP0800 (io 61) at pnpbios0 index 13 ignored
May 17 12:59:26 setup /netbsd: PNP0B00 (io 70-7f, irq 8) at pnpbios0 index 14 ignored
May 17 12:59:26 setup /netbsd: PNP0C04 (io f0-ff, irq 13) at pnpbios0 index 15 ignored
May 17 12:59:26 setup /netbsd: PNP0C01 (io c00-c01 c06-c08 c14 c50-c52 c6c-c6f cd6-cd7 f50-f57) at pnpbios0 index 17 ignored
May 17 12:59:26 setup /netbsd: pci0 at mainbus0 bus 0: configuration mode 1
May 17 12:59:26 setup /netbsd: pci0: i/o space, memory space enabled
May 17 12:59:26 setup /netbsd: pchb0 at pci0 dev 0 function 0
May 17 12:59:26 setup /netbsd: pchb0: Pequr Technology product 0x0009 (rev. 0x05)
May 17 12:59:26 setup /netbsd: pchb1 at pci0 dev 0 function 1
May 17 12:59:26 setup /netbsd: pchb1: Pequr Technology product 0x0009 (rev. 0x05)
May 17 12:59:26 setup /netbsd: ppb0 at pci0 dev 2 function 0: Intel product 0x0962 (rev. 0x01)
May 17 12:59:26 setup /netbsd: pci1 at ppb0 bus 1
May 17 12:59:26 setup /netbsd: pci1: i/o space, memory space enabled
May 17 12:59:26 setup /netbsd: ahc0 at pci1 dev 4 function 0
May 17 12:59:26 setup /netbsd: ahc0: interrupting at irq 14
May 17 12:59:26 setup /netbsd: ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
May 17 12:59:27 setup /netbsd: scsibus0 at ahc0 channel 0: 16 targets, 8 luns per target
May 17 12:59:27 setup /netbsd: ahc1 at pci1 dev 6 function 0
May 17 12:59:27 setup /netbsd: ahc1: interrupting at irq 5
May 17 12:59:27 setup /netbsd: ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
May 17 12:59:27 setup /netbsd: scsibus1 at ahc1 channel 0: 8 targets, 8 luns per target
May 17 12:59:27 setup /netbsd: fxp0 at pci0 dev 8 function 0: Intel i82557 Ethernet, rev 8
May 17 12:59:27 setup /netbsd: fxp0: interrupting at irq 11
May 17 12:59:27 setup /netbsd: fxp0: Ethernet address 00:b0:d0:21:06:35, 10/100 Mb/s
May 17 12:59:27 setup /netbsd: inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
May 17 12:59:27 setup /netbsd: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
May 17 12:59:27 setup /netbsd: vga1 at pci0 dev 14 function 0: ATI Technologies product 0x4759 (rev. 0x7a)
May 17 12:59:27 setup /netbsd: wsdisplay0 at vga1: console (80x25, vt100 emulation)
May 17 12:59:27 setup /netbsd: pcib0 at pci0 dev 15 function 0
May 17 12:59:27 setup /netbsd: pcib0: Pequr Technology product 0x0200 (rev. 0x4f)
May 17 12:59:27 setup /netbsd: isa0 at pcib0
May 17 12:59:27 setup /netbsd: pckbc0 at isa0 port 0x60-0x64
May 17 12:59:27 setup /netbsd: pckbd0 at pckbc0 (kbd slot)
May 17 12:59:27 setup /netbsd: pckbc0: using irq 1 for kbd slot
May 17 12:59:27 setup /netbsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0
May 17 12:59:27 setup /netbsd: pms0 at pckbc0 (aux slot)
May 17 12:59:27 setup /netbsd: pckbc0: using irq 12 for aux slot
May 17 12:59:28 setup /netbsd: wsmouse0 at pms0 mux 0
May 17 12:59:28 setup /netbsd: pcppi0 at isa0 port 0x61
May 17 12:59:28 setup /netbsd: midi0 at pcppi0: PC speaker
May 17 12:59:28 setup /netbsd: spkr0 at pcppi0
May 17 12:59:28 setup /netbsd: sysbeep0 at pcppi0
May 17 12:59:28 setup /netbsd: isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
May 17 12:59:28 setup /netbsd: npx0 at isa0 port 0xf0-0xff: using exception 16
May 17 12:59:28 setup /netbsd: fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
May 17 12:59:28 setup /netbsd: fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
May 17 12:59:28 setup /netbsd: isapnp0: no ISA Plug 'n Play devices found
May 17 12:59:28 setup /netbsd: biomask e765 netmask ef65 ttymask ffe7
May 17 12:59:28 setup /netbsd: scsibus0: waiting 2 seconds for devices to settle...
May 17 12:59:28 setup /netbsd: ahc0: target 0 using 16bit transfers
May 17 12:59:28 setup /netbsd: ahc0: target 0 synchronous at 40.0MHz, offset = 0x1f
May 17 12:59:28 setup /netbsd: ahc0: target 0 using tagged queuing
May 17 12:59:28 setup /netbsd: sd0 at scsibus0 target 0 lun 0: <QUANTUM, ATLAS 10K 36SCA, UCHD> SCSI3 0/direct fixed
May 17 12:59:28 setup /netbsd: sd0: 34732 MB, 10042 cyl, 24 head, 295 sec, 512 bytes/sect x 71132998 sectors
May 17 12:59:29 setup /netbsd: ahc0: target 1 using 16bit transfers
May 17 12:59:29 setup /netbsd: ahc0: target 1 synchronous at 40.0MHz, offset = 0x1f
May 17 12:59:29 setup /netbsd: ahc0: target 1 using tagged queuing
May 17 12:59:29 setup /netbsd: sd1 at scsibus0 target 1 lun 0: <QUANTUM, ATLAS 10K 36SCA, UCHD> SCSI3 0/direct fixed
May 17 12:59:29 setup /netbsd: sd1: 34732 MB, 10042 cyl, 24 head, 295 sec, 512 bytes/sect x 71132998 sectors
May 17 12:59:29 setup /netbsd: ahc0: target 6 using 8bit transfers
May 17 12:59:29 setup /netbsd: ahc0: target 6 using asynchronous transfers
May 17 12:59:29 setup /netbsd: uk0 at scsibus0 target 6 lun 0: <DELL, 1x4 U2W SCSI BP, 5.24> SCSI2 3/processor fixed
May 17 12:59:29 setup /netbsd: uk0: unknown device
May 17 12:59:29 setup /netbsd: scsibus1: waiting 2 seconds for devices to settle...
May 17 12:59:29 setup /netbsd: ahc1: target 1 synchronous at 20.0MHz, offset = 0xf
May 17 12:59:29 setup /netbsd: ahc1: target 1 using tagged queuing
May 17 12:59:29 setup /netbsd: sd2 at scsibus1 target 1 lun 0: <SEAGATE, ST34520N, 1487> SCSI2 0/direct fixed
May 17 12:59:29 setup /netbsd: sd2: 4340 MB, 9006 cyl, 4 head, 246 sec, 512 bytes/sect x 8888924 sectors
May 17 12:59:29 setup /netbsd: Kernelized RAIDframe activated
May 17 12:59:29 setup /netbsd: IPsec: Initialized Security Association Processing.
May 17 12:59:29 setup /netbsd: boot device: sd2
May 17 12:59:29 setup /netbsd: root on sd2a dumps on sd2b
May 17 12:59:30 setup /netbsd: root file system type: ffs
May 17 12:59:30 setup /netbsd: RAIDFRAME: protectedSectors is 64
May 17 12:59:30 setup /netbsd: raid0: Component /dev/sd0a being configured at row: 0 col: 0
May 17 12:59:30 setup /netbsd:          Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
May 17 12:59:30 setup /netbsd:          Version: 2 Serial Number: 123456 Mod Counter: 165
May 17 12:59:30 setup /netbsd:          Clean: Yes Status: 0
May 17 12:59:30 setup /netbsd: raid0: Component /dev/sd1a being configured at row: 0 col: 1
May 17 12:59:30 setup /netbsd:          Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
May 17 12:59:30 setup /netbsd:          Version: 2 Serial Number: 123456 Mod Counter: 165
May 17 12:59:30 setup /netbsd:          Clean: Yes Status: 0
May 17 12:59:30 setup /netbsd: RAIDFRAME: Configure (RAID Level 0): total number of sectors is 142194432 (69430 MB)
May 17 12:59:30 setup /netbsd: RAIDFRAME(RAID Level 0): Using 6 floating recon bufs with no head sep limit
May 17 12:59:30 setup /netbsd: IP Filter: v3.4.2 initialized.  Default = pass all, Logging = enabled
May 17 12:59:30 setup /netbsd: fxp0: dmasync timeout
May 17 12:59:30 setup /netbsd: fxp0: dmasync timeout
May 17 12:59:30 setup /netbsd: wsdisplay0: screen 1 added (80x25, vt100 emulation)
May 17 12:59:30 setup /netbsd: wsdisplay0: screen 2 added (80x25, vt100 emulation)
May 17 12:59:30 setup /netbsd: wsdisplay0: screen 3 added (80x25, vt100 emulation)
May 17 12:59:30 setup /netbsd: wsdisplay0: screen 4 added (80x25, vt100 emulation)
May 17 12:59:30 setup /netbsd: wsmux1: connecting to wsdisplay0
May 17 12:59:24 setup savecore: no core dump
May 17 12:59:43 setup /netbsd: fxp0: dmasync timeout
May 17 13:00:15 setup last message repeated 2 times
May 17 13:02:07 setup last message repeated 7 times
May 17 13:12:12 setup last message repeated 37 times
May 17 13:22:19 setup last message repeated 37 times
May 17 13:32:20 setup last message repeated 37 times
May 17 13:42:12 setup last message repeated 37 times

>How-To-Repeat:

	Use the fxp device on a Dell PowerEdge 2400?  I'm really not sure if this can
	easily be repeated.  I'm willing to be a guinnea pig and test experimental
	patches.  

>Fix:
	Unknown.
>Release-Note:
>Audit-Trail:

From: <abs@mono.org>
To: dokas@cs.umn.edu
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: port-i386/10141: fxp bug(?) on large PCs
Date: Wed, 17 May 2000 20:27:55 +0100 (BST)

 	Just a datapoint - we're running a relatively recent -current on
 	a Dell PE1300 and using the same adaptor without any problems

 fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         media: Ethernet autoselect (100baseTX full-duplex)
         status: active
         inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255

 Copy of our dmesg in case its any help:

 NetBSD 1.4X (wopr) #0: Fri Apr 21 15:08:53 BST 2000
     abs@wopr.int.purplei.com:/home/abs/wopr
 cpu0: family 6 model 7 step 3
 cpu0: Intel Pentium III (686-class)
 total memory = 191 MB
 avail memory = 155 MB
 using 4870 buffers containing 29400 KB of memory
 BIOS32 rev. 0 found at 0xffe90
 PCI BIOS rev. 2.1 found at 0xfc85e
 PCI IRQ Routing Table rev. 1.0 found at 0xfc410, size 192 bytes (10 entries)
 PCI Interrupt Router at 000:07:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
 mainbus0 (root)
 pnpbios0 at mainbus0: nodes 16, max len 248
 com3 at pnpbios0 index 1 (PNP0501)
 com3: io 3f8-3ff, irq 4
 com3: ns16550a, working fifo
 com4 at pnpbios0 index 2 (PNP0501)
 com4: io 2f8-2ff, irq 3
 com4: ns16550a, working fifo
 lpt3 at pnpbios0 index 3 (PNP0401)
 lpt3: io 378-37f 778-77b, irq 7
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled
 pchb0 at pci0 dev 0 function 0
 pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
 ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 0 function 0: ATI Technologies Mach64 GW (rev. 0x7a)
 wsdisplay0 at vga0: console (80x25, vt100 emulation)
 ppb1 at pci0 dev 2 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (r
 ev. 0x03)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 ahc0 at pci2 dev 11 function 0
 ahc0: interrupting at irq 11
 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
 scsibus0 at ahc0 channel 0: 16 targets, 8 luns per target
 pcib0 at pci0 dev 7 function 0
 pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
 pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
 pciide0: bus-master DMA support present
 pciide0: primary channel wired to compatibility mode
 wd0 at pciide0 channel 0 drive 0: <IBM-DPTA-372050>
 wd0: drive supports 16-sector pio transfers, lba addressing
 wd0: 19574 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40088160 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
 pciide0: primary channel interrupting at irq 14
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
 pciide0: secondary channel wired to compatibility mode
 atapibus0 at pciide0 channel 1
 cd0 at atapibus0 drive 0: <SAMSUNG SC-140B, , d005> type 5 cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
 pciide0: secondary channel interrupting at irq 15
 cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
 uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 
 0x01)
 uhci0: interrupting at irq 11
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revisio
 n 0x02) at pci0 dev 7 function 3 not configured
 fxp0 at pci0 dev 13 function 0: Intel i82557 Ethernet, rev 8
 fxp0: interrupting at irq 10
 fxp0: Ethernet address 00:d0:b7:47:23:17, 10/100 Mb/s
 inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 isa0 at pcib0
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pmsi0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pmsi0 mux 0
 pcppi0 at isa0 port 0x61
 spkr0 at pcppi0
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff: using exception 16
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 isapnp0: no ISA Plug 'n Play devices found
 apm0 at mainbus0: Power Management spec V1.2
 biomask eb65 netmask ef65 ttymask ffe7
 scsibus0: waiting 2 seconds for devices to settle...
 ahc0: target 0 using 16bit transfers
 ahc0: target 0 synchronous at 40.0MHz, offset = 0x1f
 ahc0: target 0 using tagged queuing
 sd0 at scsibus0 target 0 lun 0: <QUANTUM, ATLAS IV 9 WLS, 0808> SCSI3 0/direct f
 ixed
 sd0: 8683 MB, 13816 cyl, 4 head, 321 sec, 512 bytes/sect x 17783249 sectors
 ahc0: target 1 using 16bit transfers
 ahc0: target 1 synchronous at 40.0MHz, offset = 0x1f
 ahc0: target 1 using tagged queuing
 sd1 at scsibus0 target 1 lun 0: <IBM, DMVS18N, 0250> SCSI3 0/direct fixed
 sd1: 17501 MB, 11736 cyl, 10 head, 305 sec, 512 bytes/sect x 35843670 sectors
 boot device: sd0
 root on sd0a dumps on sd0b
 root file system type: ffs



 		David/absolute
 				       -- www.netbsd.org: No hype required --

 On Wed, 17 May 2000 dokas@cs.umn.edu wrote:

 > 
 > >Number:         10141
 > >Category:       port-i386
 > >Synopsis:       'fxp0: dmasync timeout' messages
 > >Confidential:   no
 > >Severity:       serious
 > >Priority:       medium
 > >Responsible:    port-i386-maintainer
 > >State:          open
 > >Class:          sw-bug
 > >Submitter-Id:   net
 > >Arrival-Date:   Wed May 17 12:18:01 PDT 2000
 > >Closed-Date:
 > >Last-Modified:
 > >Originator:     Paul Dokas
 > >Release:        NetBSD-current May 17, 2000
 > >Organization:
 > 	University of Minnesota, Dept of Computer Science
 > >Environment:
 > 	
 > System: NetBSD setup 1.4Y NetBSD 1.4Y (NEXUS) #0: Wed May 17 10:12:33 CDT 2000 root@setup:/usr/src/sys/arch/i386/compile/NEXUS i386
 > 
 > 
 > >Description:
 > 	I've got a Dell PowerEdge 2400 with a built in fxp ethernet adapter.
 > 	Starting with yesterday's -current (May 16), I've started getting lots
 >         of the following messages:
 > 
 > 	  fxp0: dmasync timeout
 > 
 > 	at a rate of about 1 per 15 seconds.
 > 
 > 
 > 	Here's the dmesg output for this machine:
 > 
 > May 17 12:59:23 setup /netbsd: NetBSD 1.4Y (NEXUS) #0: Wed May 17 10:12:33 CDT 2000
 > May 17 12:59:23 setup /netbsd:     root@setup:/usr/src/sys/arch/i386/compile/NEXUS
 > May 17 12:59:23 setup /netbsd: cpu0: family 6 model 8 step 1
 > May 17 12:59:23 setup /netbsd: cpu0: Intel Pentium III (E) (686-class)
 > May 17 12:59:23 setup /netbsd: total memory = 511 MB
 > May 17 12:59:23 setup /netbsd: avail memory = 471 MB
 > May 17 12:59:23 setup /netbsd: using 4870 buffers containing 26296 KB of memory
 > May 17 12:59:23 setup /netbsd: BIOS32 rev. 0 found at 0xffe90
 > May 17 12:59:23 setup /netbsd: PCI BIOS rev. 2.1 found at 0xfc7ee
 > May 17 12:59:23 setup /netbsd: pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
 > May 17 12:59:23 setup /netbsd: PCI IRQ Routing Table rev. 1.0 found at 0xfc330, size 208 bytes (11 entries)
 > May 17 12:59:23 setup /netbsd: PCI Interrupt Router at 000:15:0 (Pequr Technology product 0x0200)
 > May 17 12:59:23 setup /netbsd: pci_intr_fixup: no compatible PCI ICU found
 > May 17 12:59:23 setup /netbsd: Warning: unable to fix up PCI interrupt routing
 > May 17 12:59:23 setup /netbsd: PCI bridge 0: primary 0, secondary 1, subordinate 1
 > May 17 12:59:24 setup /netbsd: PCI bus #1 is the last bus
 > May 17 12:59:24 setup /netbsd: [System BIOS Setting]-----------------------
 > May 17 12:59:24 setup /netbsd:   device vendor product
 > May 17 12:59:24 setup /netbsd:   register space address    size       mask
 > May 17 12:59:24 setup /netbsd: --------------------------------------------
 > May 17 12:59:24 setup /netbsd: 000:00:0 0x1166 0x0009 
 > May 17 12:59:24 setup /netbsd:          [OK]
 > May 17 12:59:24 setup /netbsd: 000:00:1 0x1166 0x0009 
 > May 17 12:59:24 setup /netbsd:          [OK]
 > May 17 12:59:24 setup /netbsd: 000:02:0 0x8086 0x0962 
 > May 17 12:59:24 setup /netbsd:          [OK]
 > May 17 12:59:24 setup /netbsd: 000:08:0 0x8086 0x1229 
 > May 17 12:59:24 setup /netbsd:  10h mem  0xfe102000 0x00001000 0
 > May 17 12:59:24 setup /netbsd:  14h port 0x0000ecc0 0x00000040 1
 > May 17 12:59:24 setup /netbsd:  18h mem  0xfe000000 0x00100000 0
 > May 17 12:59:24 setup /netbsd:          [OK]
 > May 17 12:59:24 setup /netbsd: 000:14:0 0x1002 0x4759 
 > May 17 12:59:24 setup /netbsd:  10h mem  0xf8000000 0x01000000 8
 > May 17 12:59:24 setup /netbsd:  14h port 0x0000e800 0x00000100 1
 > May 17 12:59:25 setup /netbsd:  18h mem  0xfe101000 0x00001000 0
 > May 17 12:59:25 setup /netbsd:          [OK]
 > May 17 12:59:25 setup /netbsd: 000:15:0 0x1166 0x0200 
 > May 17 12:59:25 setup /netbsd:          [OK]
 > May 17 12:59:25 setup /netbsd: --------------------------[  0 devices bogus]
 > May 17 12:59:25 setup /netbsd:  Physical memory end: 0x1fffb000
 > May 17 12:59:25 setup /netbsd:  PCI memory mapped I/O space start: 0x20000000
 > May 17 12:59:25 setup /netbsd: [PCIBIOS fixup stage]-----------------------
 > May 17 12:59:25 setup /netbsd:   device vendor product
 > May 17 12:59:25 setup /netbsd:   register space address    size       mask
 > May 17 12:59:25 setup /netbsd: --------------------------------------------
 > May 17 12:59:25 setup /netbsd: 000:00:0 0x1166 0x0009 
 > May 17 12:59:25 setup /netbsd:          [OK]
 > May 17 12:59:25 setup /netbsd: 000:00:1 0x1166 0x0009 
 > May 17 12:59:25 setup /netbsd:          [OK]
 > May 17 12:59:25 setup /netbsd: 000:02:0 0x8086 0x0962 
 > May 17 12:59:25 setup /netbsd:          [OK]
 > May 17 12:59:25 setup /netbsd: 000:08:0 0x8086 0x1229 
 > May 17 12:59:25 setup /netbsd:  10h mem  0xfe102000 0x00001000 0
 > May 17 12:59:25 setup /netbsd:  14h port 0x0000ecc0 0x00000040 1
 > May 17 12:59:25 setup /netbsd:  18h mem  0xfe000000 0x00100000 0
 > May 17 12:59:25 setup /netbsd:          [OK]
 > May 17 12:59:25 setup /netbsd: 000:14:0 0x1002 0x4759 
 > May 17 12:59:25 setup /netbsd:  10h mem  0xf8000000 0x01000000 8
 > May 17 12:59:25 setup /netbsd:  14h port 0x0000e800 0x00000100 1
 > May 17 12:59:25 setup /netbsd:  18h mem  0xfe101000 0x00001000 0
 > May 17 12:59:25 setup /netbsd:          [OK]
 > May 17 12:59:25 setup /netbsd: 000:15:0 0x1166 0x0200 
 > May 17 12:59:25 setup /netbsd:          [OK]
 > May 17 12:59:25 setup /netbsd: --------------------------[  0 devices bogus]
 > May 17 12:59:25 setup /netbsd: mainbus0 (root)
 > May 17 12:59:25 setup /netbsd: pnpbios0 at mainbus0: code f0000, data 40, entry e2f4, control 0 eventp 0
 > May 17 12:59:25 setup /netbsd: pnpbios0: nodes 17, max len 248
 > May 17 12:59:25 setup /netbsd: PNP0C02 (mem 0-9ffff 100000-1fffdfff ffe00000-ffffffff f0000-fffff, io 800-83f 580-58f 62-63 65-6f e0-ef 2c00-2c7f, irq 15) at pnpbios0 index 0 ignored
 > May 17 12:59:25 setup /netbsd: com2 at pnpbios0 index 1 (PNP0501)
 > May 17 12:59:25 setup /netbsd: com2: io 3f8-3ff, irq 4
 > May 17 12:59:25 setup /netbsd: com2: ns16550a, working fifo
 > May 17 12:59:25 setup /netbsd: com3 at pnpbios0 index 2 (PNP0501)
 > May 17 12:59:25 setup /netbsd: com3: io 2f8-2ff, irq 3
 > May 17 12:59:25 setup /netbsd: com3: ns16550a, working fifo
 > May 17 12:59:25 setup /netbsd: lpt1 at pnpbios0 index 3 (PNP0401)
 > May 17 12:59:25 setup /netbsd: lpt1: io 378-37f 778-77b, irq 7
 > May 17 12:59:25 setup /netbsd: PNP0700 (io 3f0-3f5, irq 6, dma 2) at pnpbios0 index 4 ignored
 > May 17 12:59:25 setup /netbsd: PNP0F13 (irq 12) at pnpbios0 index 5 ignored
 > May 17 12:59:25 setup /netbsd: PNP0A03 (io cf8-cff) at pnpbios0 index 6 ignored
 > May 17 12:59:25 setup /netbsd: PNP0C02 (irq 9) at pnpbios0 index 7 ignored
 > May 17 12:59:25 setup /netbsd: PNP0000 (io 20-3f a0-bf 4d0-4d1, irq 2) at pnpbios0 index 8 ignored
 > May 17 12:59:26 setup /netbsd: PNP0003 (mem fee00000-fee0ffff fec00000-fec0ffff) at pnpbios0 index 9 ignored
 > May 17 12:59:26 setup /netbsd: PNP0100 (io 40-5f, irq 0) at pnpbios0 index 10 ignored
 > May 17 12:59:26 setup /netbsd: PNP0200 (io 80-9f 0-1f c0-df, dma 4) at pnpbios0 index 11 ignored
 > May 17 12:59:26 setup /netbsd: PNP0303 (io 60 64, irq 1) at pnpbios0 index 12 ignored
 > May 17 12:59:26 setup /netbsd: PNP0800 (io 61) at pnpbios0 index 13 ignored
 > May 17 12:59:26 setup /netbsd: PNP0B00 (io 70-7f, irq 8) at pnpbios0 index 14 ignored
 > May 17 12:59:26 setup /netbsd: PNP0C04 (io f0-ff, irq 13) at pnpbios0 index 15 ignored
 > May 17 12:59:26 setup /netbsd: PNP0C01 (io c00-c01 c06-c08 c14 c50-c52 c6c-c6f cd6-cd7 f50-f57) at pnpbios0 index 17 ignored
 > May 17 12:59:26 setup /netbsd: pci0 at mainbus0 bus 0: configuration mode 1
 > May 17 12:59:26 setup /netbsd: pci0: i/o space, memory space enabled
 > May 17 12:59:26 setup /netbsd: pchb0 at pci0 dev 0 function 0
 > May 17 12:59:26 setup /netbsd: pchb0: Pequr Technology product 0x0009 (rev. 0x05)
 > May 17 12:59:26 setup /netbsd: pchb1 at pci0 dev 0 function 1
 > May 17 12:59:26 setup /netbsd: pchb1: Pequr Technology product 0x0009 (rev. 0x05)
 > May 17 12:59:26 setup /netbsd: ppb0 at pci0 dev 2 function 0: Intel product 0x0962 (rev. 0x01)
 > May 17 12:59:26 setup /netbsd: pci1 at ppb0 bus 1
 > May 17 12:59:26 setup /netbsd: pci1: i/o space, memory space enabled
 > May 17 12:59:26 setup /netbsd: ahc0 at pci1 dev 4 function 0
 > May 17 12:59:26 setup /netbsd: ahc0: interrupting at irq 14
 > May 17 12:59:26 setup /netbsd: ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
 > May 17 12:59:27 setup /netbsd: scsibus0 at ahc0 channel 0: 16 targets, 8 luns per target
 > May 17 12:59:27 setup /netbsd: ahc1 at pci1 dev 6 function 0
 > May 17 12:59:27 setup /netbsd: ahc1: interrupting at irq 5
 > May 17 12:59:27 setup /netbsd: ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
 > May 17 12:59:27 setup /netbsd: scsibus1 at ahc1 channel 0: 8 targets, 8 luns per target
 > May 17 12:59:27 setup /netbsd: fxp0 at pci0 dev 8 function 0: Intel i82557 Ethernet, rev 8
 > May 17 12:59:27 setup /netbsd: fxp0: interrupting at irq 11
 > May 17 12:59:27 setup /netbsd: fxp0: Ethernet address 00:b0:d0:21:06:35, 10/100 Mb/s
 > May 17 12:59:27 setup /netbsd: inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
 > May 17 12:59:27 setup /netbsd: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > May 17 12:59:27 setup /netbsd: vga1 at pci0 dev 14 function 0: ATI Technologies product 0x4759 (rev. 0x7a)
 > May 17 12:59:27 setup /netbsd: wsdisplay0 at vga1: console (80x25, vt100 emulation)
 > May 17 12:59:27 setup /netbsd: pcib0 at pci0 dev 15 function 0
 > May 17 12:59:27 setup /netbsd: pcib0: Pequr Technology product 0x0200 (rev. 0x4f)
 > May 17 12:59:27 setup /netbsd: isa0 at pcib0
 > May 17 12:59:27 setup /netbsd: pckbc0 at isa0 port 0x60-0x64
 > May 17 12:59:27 setup /netbsd: pckbd0 at pckbc0 (kbd slot)
 > May 17 12:59:27 setup /netbsd: pckbc0: using irq 1 for kbd slot
 > May 17 12:59:27 setup /netbsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0
 > May 17 12:59:27 setup /netbsd: pms0 at pckbc0 (aux slot)
 > May 17 12:59:27 setup /netbsd: pckbc0: using irq 12 for aux slot
 > May 17 12:59:28 setup /netbsd: wsmouse0 at pms0 mux 0
 > May 17 12:59:28 setup /netbsd: pcppi0 at isa0 port 0x61
 > May 17 12:59:28 setup /netbsd: midi0 at pcppi0: PC speaker
 > May 17 12:59:28 setup /netbsd: spkr0 at pcppi0
 > May 17 12:59:28 setup /netbsd: sysbeep0 at pcppi0
 > May 17 12:59:28 setup /netbsd: isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 > May 17 12:59:28 setup /netbsd: npx0 at isa0 port 0xf0-0xff: using exception 16
 > May 17 12:59:28 setup /netbsd: fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 > May 17 12:59:28 setup /netbsd: fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 > May 17 12:59:28 setup /netbsd: isapnp0: no ISA Plug 'n Play devices found
 > May 17 12:59:28 setup /netbsd: biomask e765 netmask ef65 ttymask ffe7
 > May 17 12:59:28 setup /netbsd: scsibus0: waiting 2 seconds for devices to settle...
 > May 17 12:59:28 setup /netbsd: ahc0: target 0 using 16bit transfers
 > May 17 12:59:28 setup /netbsd: ahc0: target 0 synchronous at 40.0MHz, offset = 0x1f
 > May 17 12:59:28 setup /netbsd: ahc0: target 0 using tagged queuing
 > May 17 12:59:28 setup /netbsd: sd0 at scsibus0 target 0 lun 0: <QUANTUM, ATLAS 10K 36SCA, UCHD> SCSI3 0/direct fixed
 > May 17 12:59:28 setup /netbsd: sd0: 34732 MB, 10042 cyl, 24 head, 295 sec, 512 bytes/sect x 71132998 sectors
 > May 17 12:59:29 setup /netbsd: ahc0: target 1 using 16bit transfers
 > May 17 12:59:29 setup /netbsd: ahc0: target 1 synchronous at 40.0MHz, offset = 0x1f
 > May 17 12:59:29 setup /netbsd: ahc0: target 1 using tagged queuing
 > May 17 12:59:29 setup /netbsd: sd1 at scsibus0 target 1 lun 0: <QUANTUM, ATLAS 10K 36SCA, UCHD> SCSI3 0/direct fixed
 > May 17 12:59:29 setup /netbsd: sd1: 34732 MB, 10042 cyl, 24 head, 295 sec, 512 bytes/sect x 71132998 sectors
 > May 17 12:59:29 setup /netbsd: ahc0: target 6 using 8bit transfers
 > May 17 12:59:29 setup /netbsd: ahc0: target 6 using asynchronous transfers
 > May 17 12:59:29 setup /netbsd: uk0 at scsibus0 target 6 lun 0: <DELL, 1x4 U2W SCSI BP, 5.24> SCSI2 3/processor fixed
 > May 17 12:59:29 setup /netbsd: uk0: unknown device
 > May 17 12:59:29 setup /netbsd: scsibus1: waiting 2 seconds for devices to settle...
 > May 17 12:59:29 setup /netbsd: ahc1: target 1 synchronous at 20.0MHz, offset = 0xf
 > May 17 12:59:29 setup /netbsd: ahc1: target 1 using tagged queuing
 > May 17 12:59:29 setup /netbsd: sd2 at scsibus1 target 1 lun 0: <SEAGATE, ST34520N, 1487> SCSI2 0/direct fixed
 > May 17 12:59:29 setup /netbsd: sd2: 4340 MB, 9006 cyl, 4 head, 246 sec, 512 bytes/sect x 8888924 sectors
 > May 17 12:59:29 setup /netbsd: Kernelized RAIDframe activated
 > May 17 12:59:29 setup /netbsd: IPsec: Initialized Security Association Processing.
 > May 17 12:59:29 setup /netbsd: boot device: sd2
 > May 17 12:59:29 setup /netbsd: root on sd2a dumps on sd2b
 > May 17 12:59:30 setup /netbsd: root file system type: ffs
 > May 17 12:59:30 setup /netbsd: RAIDFRAME: protectedSectors is 64
 > May 17 12:59:30 setup /netbsd: raid0: Component /dev/sd0a being configured at row: 0 col: 0
 > May 17 12:59:30 setup /netbsd:          Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
 > May 17 12:59:30 setup /netbsd:          Version: 2 Serial Number: 123456 Mod Counter: 165
 > May 17 12:59:30 setup /netbsd:          Clean: Yes Status: 0
 > May 17 12:59:30 setup /netbsd: raid0: Component /dev/sd1a being configured at row: 0 col: 1
 > May 17 12:59:30 setup /netbsd:          Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
 > May 17 12:59:30 setup /netbsd:          Version: 2 Serial Number: 123456 Mod Counter: 165
 > May 17 12:59:30 setup /netbsd:          Clean: Yes Status: 0
 > May 17 12:59:30 setup /netbsd: RAIDFRAME: Configure (RAID Level 0): total number of sectors is 142194432 (69430 MB)
 > May 17 12:59:30 setup /netbsd: RAIDFRAME(RAID Level 0): Using 6 floating recon bufs with no head sep limit
 > May 17 12:59:30 setup /netbsd: IP Filter: v3.4.2 initialized.  Default = pass all, Logging = enabled
 > May 17 12:59:30 setup /netbsd: fxp0: dmasync timeout
 > May 17 12:59:30 setup /netbsd: fxp0: dmasync timeout
 > May 17 12:59:30 setup /netbsd: wsdisplay0: screen 1 added (80x25, vt100 emulation)
 > May 17 12:59:30 setup /netbsd: wsdisplay0: screen 2 added (80x25, vt100 emulation)
 > May 17 12:59:30 setup /netbsd: wsdisplay0: screen 3 added (80x25, vt100 emulation)
 > May 17 12:59:30 setup /netbsd: wsdisplay0: screen 4 added (80x25, vt100 emulation)
 > May 17 12:59:30 setup /netbsd: wsmux1: connecting to wsdisplay0
 > May 17 12:59:24 setup savecore: no core dump
 > May 17 12:59:43 setup /netbsd: fxp0: dmasync timeout
 > May 17 13:00:15 setup last message repeated 2 times
 > May 17 13:02:07 setup last message repeated 7 times
 > May 17 13:12:12 setup last message repeated 37 times
 > May 17 13:22:19 setup last message repeated 37 times
 > May 17 13:32:20 setup last message repeated 37 times
 > May 17 13:42:12 setup last message repeated 37 times
 > 
 > >How-To-Repeat:
 > 
 > 	Use the fxp device on a Dell PowerEdge 2400?  I'm really not sure if this can
 > 	easily be repeated.  I'm willing to be a guinnea pig and test experimental
 > 	patches.  
 > 
 > >Fix:
 > 	Unknown.
 > >Release-Note:
 > >Audit-Trail:
 > >Unformatted:
 > 

Responsible-Changed-From-To: port-i386-maintainer->jhawk 
Responsible-Changed-By: jhawk 
Responsible-Changed-When: Wed May 17 13:09:59 PDT 2000 
Responsible-Changed-Why:  
I "broke" this. 

From: John Hawkinson <jhawk@MIT.EDU>
To: dokas@cs.umn.edu
Cc: gnats-bugs@gnats.netbsd.org, netbsd-bugs@netbsd.org
Subject: Re: port-i386/10141: fxp bug(?) on large PCs
Date: Wed, 17 May 2000 16:23:29 -0400 (EDT)

 | >Description:
 | 	  I've got a Dell PowerEdge 2400 with a built in fxp ethernet adapter.
 | 	  Starting with yesterday's -current (May 16), I've started getting lots
 | 	  of the following messages:
 | 
 | 	    fxp0: dmasync timeout
 | 
 | 	  at a rate of about 1 per 15 seconds.

 Interesting.

 I added checks to the fxp driver (dev/ic/i82557.c) to avoid some places
 where it had the potential to hang forever:

 ----------------------------
 revision 1.26
 date: 2000/05/12 03:35:57;  author: jhawk;  state: Exp;  lines: +26 -7
 Catch some potentially infinite loops in while() loops if the chip happens
 to "go insane" and never complete some operations (dmasync, etc.).
 ----------------------------

 It appears that in some cases those timeouts may be too short.

 It would be good to know which of the timeouts is causing the problem,
 and what a better value for it might be. Perhaps the attached patch,
 for instance.

 Could you also try frobbing the timeout count before the loop,
 for instance:

   1373          i = 10000;
   1374          do {
   1375                  FXP_CDCONFIGSYNC(sc,
   1376                      BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   1377          } while ((cbp->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   1378          if (i == 0) {
   1379                  printf("%s: dmasync timeout\n", sc->sc_dev.dv_xname);
   1380                  return ETIMEDOUT;

 change the initialization of i to 100,000 and see if that improves things?

 Thanks.

 --jhawk

 *** sys/dev/ic/i82557.c	Wed May 17 16:19:13 2000
 --- sys/dev/ic/i82557.c	Wed May 17 16:16:42 2000
 ***************
 *** 1376,1382 ****
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((cbp->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   	if (i == 0) {
 ! 		printf("%s: dmasync timeout\n", sc->sc_dev.dv_xname);
   		return ETIMEDOUT;
   	}

 --- 1376,1382 ----
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((cbp->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   	if (i == 0) {
 ! 		printf("%s: 1dmasync timeout\n", sc->sc_dev.dv_xname);
   		return ETIMEDOUT;
   	}

 ***************
 *** 1406,1412 ****
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((cb_ias->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   	if (i == 0) {
 ! 		printf("%s: dmasync timeout\n", sc->sc_dev.dv_xname);
   		return ETIMEDOUT;
   	}
   	/*
 --- 1406,1412 ----
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((cb_ias->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   	if (i == 0) {
 ! 		printf("%s: 2dmasync timeout\n", sc->sc_dev.dv_xname);
   		return ETIMEDOUT;
   	}
   	/*
 ***************
 *** 1865,1871 ****
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((mcsp->cb_status & FXP_CB_STATUS_C) == 0 && --count);
   	if (count == 0) {
 ! 		printf("%s: dmasync timeout\n", sc->sc_dev.dv_xname);
   		return;
   	}
   }
 --- 1865,1871 ----
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((mcsp->cb_status & FXP_CB_STATUS_C) == 0 && --count);
   	if (count == 0) {
 ! 		printf("%s: 3dmasync timeout\n", sc->sc_dev.dv_xname);
   		return;
   	}
   }
State-Changed-From-To: open->feedback 
State-Changed-By: jhawk 
State-Changed-When: Wed May 17 13:27:44 PDT 2000 
State-Changed-Why:  
Request further information from the pr submitter 

From: John Hawkinson <jhawk@mit.edu>
To: dokas@cs.umn.edu
Cc: gnats-bugs@netbsd.org
Subject: Re: port-i386/10141: fxp bug(?) on large PCs
Date: Wed, 17 May 2000 18:32:28 -0400 (EDT)

 Please try this patch instead of the previous one.

 It recalibrates timeouts to use DELAY(1) which should
 be less machine-dependant, and also is more clear about
 which timeouts are losing.

 If it still causes problems, please try bumping up the
 timeout numbers again.

 --jhawk

 Index: i82557.c
 ===================================================================
 RCS file: /cvsroot/syssrc/sys/dev/ic/i82557.c,v
 retrieving revision 1.26
 diff -c -r1.26 i82557.c
 *** i82557.c	2000/05/12 03:35:57	1.26
 --- i82557.c	2000/05/17 22:30:50
 ***************
 *** 1370,1382 ****
   	CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDCONFIGOFF);
   	CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);
   	/* ...and wait for it to complete. */
 ! 	i = 10000;
   	do {
   		FXP_CDCONFIGSYNC(sc,
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((cbp->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   	if (i == 0) {
 ! 		printf("%s: dmasync timeout\n", sc->sc_dev.dv_xname);
   		return ETIMEDOUT;
   	}

 --- 1370,1384 ----
   	CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDCONFIGOFF);
   	CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);
   	/* ...and wait for it to complete. */
 ! 	i = 1000;
   	do {
   		FXP_CDCONFIGSYNC(sc,
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
 + 		DELAY(1);
   	} while ((cbp->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   	if (i == 0) {
 ! 		printf("%s at line %d: dmasync timeout\n",
 ! 		    sc->sc_dev.dv_xname, __LINE__);
   		return ETIMEDOUT;
   	}

 ***************
 *** 1400,1414 ****
   	CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDIASOFF);
   	CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);
   	/* ...and wait for it to complete. */
 ! 	i = 10000;
   	do {
   		FXP_CDIASSYNC(sc,
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((cb_ias->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   	if (i == 0) {
 ! 		printf("%s: dmasync timeout\n", sc->sc_dev.dv_xname);
   		return ETIMEDOUT;
   	}
   	/*
   	 * Initialize the transmit descriptor ring.  txlast is initialized
   	 * to the end of the list so that it will wrap around to the first
 --- 1402,1419 ----
   	CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDIASOFF);
   	CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);
   	/* ...and wait for it to complete. */
 ! 	i = 1000;
   	do {
   		FXP_CDIASSYNC(sc,
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
 + 		DELAY(1);
   	} while ((cb_ias->cb_status & FXP_CB_STATUS_C) == 0 && --i);
   	if (i == 0) {
 ! 		printf("%s at line %d: dmasync timeout\n",
 ! 		    sc->sc_dev.dv_xname, __LINE__);
   		return ETIMEDOUT;
   	}
 + 
   	/*
   	 * Initialize the transmit descriptor ring.  txlast is initialized
   	 * to the end of the list so that it will wrap around to the first
 ***************
 *** 1842,1853 ****
   	 * Wait until the command unit is not active.  This should never
   	 * happen since nothing is queued, but make sure anyway.
   	 */
 ! 	count = 10000;
   	while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) ==
   	    FXP_SCB_CUS_ACTIVE && --count)
 ! 		/* nothing */ ;
   	if (count == 0) {
 ! 		printf("%s: command queue timeout\n", sc->sc_dev.dv_xname);
   		return;
   	}

 --- 1847,1859 ----
   	 * Wait until the command unit is not active.  This should never
   	 * happen since nothing is queued, but make sure anyway.
   	 */
 ! 	count = 100;
   	while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) ==
   	    FXP_SCB_CUS_ACTIVE && --count)
 ! 		DELAY(1);
   	if (count == 0) {
 ! 		printf("%s at line %d: command queue timeout\n",
 ! 		    sc->sc_dev.dv_xname, __LINE__);
   		return;
   	}

 ***************
 *** 1859,1871 ****
   	CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);

   	/* ...and wait for it to complete. */
 ! 	count = 10000;
   	do {
   		FXP_CDMCSSYNC(sc,
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
   	} while ((mcsp->cb_status & FXP_CB_STATUS_C) == 0 && --count);
   	if (count == 0) {
 ! 		printf("%s: dmasync timeout\n", sc->sc_dev.dv_xname);
   		return;
   	}
   }
 --- 1865,1879 ----
   	CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);

   	/* ...and wait for it to complete. */
 ! 	count = 1000;
   	do {
   		FXP_CDMCSSYNC(sc,
   		    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
 + 		DELAY(1);
   	} while ((mcsp->cb_status & FXP_CB_STATUS_C) == 0 && --count);
   	if (count == 0) {
 ! 		printf("%s at line %d: dmasync timeout\n",
 ! 		    sc->sc_dev.dv_xname, __LINE__);
   		return;
   	}
   }

From: Paul B Dokas <dokas@cs.umn.edu>
To: John Hawkinson <jhawk@MIT.EDU>
Cc:  
Subject: Re: port-i386/10141: fxp bug(?) on large PCs
Date: Fri, 19 May 2000 10:51:21 -0500 (CDT)

 On Wed, 17 May 2000, John Hawkinson wrote:
 >
 > Please try this patch instead of the previous one.
 > 
 > It recalibrates timeouts to use DELAY(1) which should
 > be less machine-dependant, and also is more clear about
 > which timeouts are losing.
 > 
 > If it still causes problems, please try bumping up the
 > timeout numbers again.
 > 
 > --jhawk

 This patch seems to have made the timeouts go away and I haven't seen
 any problems created either.  I'd like to see the patch committed.

 Paul

[...] 
 --
 Paul Dokas                                            dokas@cs.umn.edu
 ======================================================================
 Don Juan Matus:  "an enigma wrapped in mystery wrapped in a tortilla."

State-Changed-From-To: feedback->closed 
State-Changed-By: jhawk 
State-Changed-When: Fri May 19 09:02:30 PDT 2000 
State-Changed-Why:  
Submitter confirmed fix; fix checked in as i82557.c rev 1.27. 
--jhawk 
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.