NetBSD Problem Report #10267

Received: (qmail 15054 invoked from network); 2 Jun 2000 22:34:24 -0000
Message-Id: <200006022233.e52MXH500395@rfhpc8321.fh-regensburg.de>
Date: Sat, 3 Jun 2000 00:33:17 +0200 (MEST)
From: Hubert Feyrer <hubertf@netbsd.org>
Reply-To: hubertf@netbsd.org
To: gnats-bugs@gnats.netbsd.org
Subject: PCIBIOS hangs(?)
X-Send-Pr-Version: 3.95

>Number:         10267
>Category:       port-i386
>Synopsis:       PCIBIOS hangs(?)
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    mycroft
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Fri Jun 02 22:35:00 +0000 2000
>Closed-Date:    Sun Jul 04 03:51:43 +0000 2004
>Last-Modified:  Sun Jul 04 03:51:43 +0000 2004
>Originator:     Hubert Feyrer
>Release:        20000603MET
>Organization:

>Environment:

The system hans on:
NetBSD 1.4Z (NOON-$Revision: 1.31 $) #3: Sat Jun  3 00:01:10 MEST 2000

The system boots fine with:
System: NetBSD noon 1.4Z NetBSD 1.4Z (NOON-$Revision: 1.31 $) #2: Thu Jun 1 04:54:45 MEST 2000 feyrer@noon:/usr/cvs/src-current/sys/arch/i386/compile/NOON i386


>Description:
	Booting a -current kernel from today's sources on a Toshiba
	Satellite 2140XCDS hangs after printing:

 ...
 using 4870 buffers containing 21384 KB of memory
 BIOS32 rev. 0 found at 0xfe95a

	Ctl+Alt+Esc didn't cause anything.
	Using a kernel from yesterday, it boots fine. The next few lines
	after the above are:

 ...
 using 4870 buffers containing 21384 KB of memory
 BIOS32 rev. 0 found at 0xfe95a
 PCI BIOS rev. 2.1 found at 0xfd1d8
 pcibios: config mechanism [1][x], special cycles [x][x], last bus 21
 PCI IRQ Routing Table rev. 1.0 found at 0xfec60, size 112 bytes (5 entries)
 PCI Interrupt Router at 000:01:0 (Toshiba America Info Systems ISA Bridge)
 pci_intr_fixup: no compatible PCI ICU found
 Warning: unable to fix up PCI interrupt routing
 PCI bridge 0: primary 0, secondary 1, subordinate 1
 PCI bridge 1: primary 0, secondary 2, subordinate 2
 ...

	See below for full dmesg output from yesterday's kernel [1].

	See below for kernel config file [2].


>How-To-Repeat:
	cvs update, build kernel, see it hang; go back to yesterday's
	kernel.

>Fix:
	no idea.
	Was there a pcibios related change recently?



[1] Dmesg output from yesterday's kernel:

   NetBSD 1.4Z (NOON-$Revision: 1.31 $) #2: Thu Jun  1 04:54:45 MEST 2000
       feyrer@noon:/usr/cvs/src-current/sys/arch/i386/compile/NOON
   cpu0: family 5 model 8 step c
   cpu0: AMD K6-2 (586-class)
   total memory = 64960 KB
   avail memory = 37948 KB
   using 4870 buffers containing 21384 KB of memory
   BIOS32 rev. 0 found at 0xfe95a
   PCI BIOS rev. 2.1 found at 0xfd1d8
   pcibios: config mechanism [1][x], special cycles [x][x], last bus 21
   PCI IRQ Routing Table rev. 1.0 found at 0xfec60, size 112 bytes (5 entries)
   PCI Interrupt Router at 000:01:0 (Toshiba America Info Systems ISA Bridge)
   pci_intr_fixup: no compatible PCI ICU found
   Warning: unable to fix up PCI interrupt routing
   PCI bridge 0: primary 0, secondary 1, subordinate 1
   PCI bridge 1: primary 0, secondary 2, subordinate 2
   PCI bus #2 is the last bus
   [System BIOS Setting]-----------------------
     device vendor product
     register space address    size
   --------------------------------------------
   000:00:0 0x1179 0x0618 
   		[OK]
   000:08:0 0x5333 0x8c01 
   	10h mem  0xf8000000 0x04000000
   		[OK]
   000:11:0 0x1033 0x0035 
   	10h mem  0xf7fff000 0x00001000
   		[OK]
   000:12:0 0x125d 0x1978 
   	10h port 0x0000ff00 0x00000100
   		[OK]
   000:16:0 0x1179 0x0102 
   	20h port 0x00001800 0x00000010
   		[OK]
   000:19:0 0x1179 0x060a 
   	10h mem  0x00000000 0x00001000
   		[NG]
   000:19:1 0x1179 0x060a 
   	10h mem  0x00000000 0x00001000
   		[NG]
   --------------------------[  2 devices bogus]
    Physical memory end: 0x03fcd000
    PCI memory mapped I/O space start: 0x04000000
   [PCIBIOS fixup stage]-----------------------
     device vendor product
     register space address    size
   --------------------------------------------
   000:00:0 0x1179 0x0618 
   		[OK]
   000:08:0 0x5333 0x8c01 
   	10h mem  0xf8000000 0x04000000
   		[OK]
   000:11:0 0x1033 0x0035 
   	10h mem  0xf7fff000 0x00001000
   		[OK]
   000:12:0 0x125d 0x1978 
   	10h port 0x0000ff00 0x00000100
   		[OK]
   000:16:0 0x1179 0x0102 
   	20h port 0x00001800 0x00000010
   		[OK]
   000:19:0 0x1179 0x060a 
   	10h mem  0x04000000 0x00001000
   		[OK]
   000:19:1 0x1179 0x060a 
   	10h mem  0x04001000 0x00001000
   		[OK]
   --------------------------[  0 devices bogus]
   mainbus0 (root)
   pnpbios0 at mainbus0: nodes 14, max len 194
   pnpbios0: node index mismatch (static): requested 0, got 1
   pci0 at mainbus0 bus 0: configuration mode 1
   pci0: i/o space, memory space enabled
   pchb0 at pci0 dev 0 function 0
   pchb0: Toshiba America Info Systems product 0x0618 (rev. 0x02)
   vga1 at pci0 dev 8 function 0: S3 ViRGE/MX (rev. 0x06)
   wsdisplay0 at vga1: console (80x25, vt100 emulation)
   ohci0 at pci0 dev 11 function 0: NEC USB Host Controller (rev. 0x02)
   ohci0: interrupting at irq 11
   ohci0: OHCI version 1.0
   usb0 at ohci0: USB revision 1.0
   uhub0 at usb0
   uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
   uhub0: 2 ports with 2 removable, self powered
   ESS Technology Inc Maestro 2E (audio multimedia, revision 0x10) at pci0 dev 12 function 0 not configured
   pciide0 at pci0 dev 16 function 0: Toshiba America Info Systems product 0x0102 (rev. 0x34)
   pciide0: bus-master DMA support present, but unused (no driver support)
   pciide0: primary channel wired to compatibility mode
   pciide0: primary channel interrupting at irq 14
   wd0 at pciide0 channel 0 drive 0: <FUJITSU MHK2048AT>
   wd0: drive supports 16-sector pio transfers, lba addressing
   wd0: 4645 MB, 10068 cyl, 15 head, 63 sec, 512 bytes/sect x 9514260 sectors
   wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
   pciide0: secondary channel wired to compatibility mode
   pciide0: secondary channel interrupting at irq 15
   atapibus0 at pciide0 channel 1
   cd0 at atapibus0 drive 0: <CD-224E-B, , 7.6G> type 5 cdrom removable
   cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
   cbb0 at pci0 dev 19 function 0: Toshiba America Info Systems ToPIC95B CardBus-PCI Bridge (rev. 0x07)
   cbb1 at pci0 dev 19 function 1: Toshiba America Info Systems ToPIC95B CardBus-PCI Bridge (rev. 0x07)
   cbb0: interrupting at irq 11
   cbb0: cacheline 0x0 lattimer 0x0
   cbb0: bhlc 0x820000 lscp 0x10100
   cardslot0 at cbb0 slot 0 flags 0
   cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x0
   pcmcia0 at cardslot0
   cbb1: interrupting at irq 11
   cbb1: cacheline 0x0 lattimer 0x0
   cbb1: bhlc 0x820000 lscp 0x20200
   cardslot1 at cbb1 slot 1 flags 0
   cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x0
   pcmcia1 at cardslot1
   isa0 at mainbus0
   pckbc0 at isa0 port 0x60-0x64
   pckbd0 at pckbc0 (kbd slot)
   pckbc0: using irq 1 for kbd slot
   wskbd0 at pckbd0: console keyboard, using wsdisplay0
   pms0 at pckbc0 (aux slot)
   pckbc0: using irq 12 for aux slot
   wsmouse0 at pms0 mux 0
   lpt0 at isa0 port 0x378-0x37b irq 7
   pcppi0 at isa0 port 0x61
   spkr0 at pcppi0
   sysbeep0 at pcppi0
   isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
   npx0 at isa0 port 0xf0-0xff: using exception 16
   fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
   fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
   isapnp0: no ISA Plug 'n Play devices found
   apm0 at mainbus0: Power Management spec V1.2
   biomask ef7d netmask ef7d ttymask ffff
   IPsec: Initialized Security Association Processing.
   pcmcia0: CIS version PCMCIA 2.0 or 2.1
   pcmcia0: CIS info: RPTI, EP401 Ethernet NE2000 Compatible, , 
   pcmcia0: Manufacturer code 0xffffffff, product 0xffffffff
   pcmcia0: function 0: network adapter, ccr addr 3f8 mask 3
   pcmcia0: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, iospace 300-31f; mwait_required io16 irqlevel
   pcmcia0: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace 320-33f; mwait_required io16 irqlevel
   pcmcia0: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace 340-35f; mwait_required io16 irqlevel
   pcmcia0: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace 360-37f; mwait_required io16 irqlevel
   ne0 at pcmcia0 function 0
   ne0: RPTI EP401 Ethernet
   ne0: Ethernet address 00:40:95:40:43:85
   uaudio0 at uhub0 port 1 configuration 1 interface 0: Microsoft Microsoft Digital Sound System 80, rev 1.00/1.00, addr 2
   uaudio0: streaming interface 1, audio rev 1.00
   audio0 at uaudio0: half duplex
   uhid0 at uhub0 port 1 configuration 1 interface 2
   uhid0: Microsoft Microsoft Digital Sound System 80, rev 1.00/1.00, addr 2, iclass 3/0
   boot device: wd0
   root on wd0a dumps on wd0b
   root file system type: ffs
   wsdisplay0: screen 1 added (80x25, vt100 emulation)
   wsdisplay0: screen 2 added (80x25, vt100 emulation)
   wsdisplay0: screen 3 added (80x25, vt100 emulation)
   wsdisplay0: screen 4 added (80x25, vt100 emulation)
   wsmux1: connecting to wsdisplay0




[2] Kernel config file used on both kernels:

   #	$NetBSD: GENERIC,v 1.346 2000/05/28 21:46:04 jhawk Exp $
   #	$Id: NOON,v 1.31 2000/05/29 01:37:46 feyrer Exp feyrer $
   #
   #	Satellite 2140 XCDS:
   #	 - In the BIOS, turn display stretching _off_ to not confuse
   #	   any X server
   #	 - no support for the Maestro 2E soundcard as of 20000523
   #	 - Some playing with the cardbus controller mode may be needed
   #	   (in the BIOS)
   #

   include "arch/i386/conf/std.i386"

   ident 		"NOON-$Revision: 1.31 $"

   maxusers	32		# estimated number of users

   # CPU support.  At least one is REQUIRED.
   #HF#options 	I386_CPU
   #HF#options 	I486_CPU
   options 	I586_CPU
   options 	I686_CPU

   # CPU-related options.
   options 	MATH_EMULATE	# floating point emulation
   #options 	VM86		# virtual 8086 emulation
   options 	USER_LDT	# user-settable LDT; used by WINE
   # eliminate delay no-ops in I/O; recommended on all but very old machines
   #options 	DUMMY_NOPS

   # delay between "rebooting ..." message and hardware reset, in milliseconds
   #options 	CPURESET_DELAY=2000

   # This option allows you to force a serial console at the specified
   # I/O address.   see console(4) for details.
   #options 	"CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
   #	you don't want the option below ON iff you are using the
   #	serial console option of the new boot strap code.
   #options 	CONS_OVERRIDE	# Always use above! independent of boot info

   # The following options override the memory sizes passed in from the boot
   # block.  Use them *only* if the boot block is unable to determine the correct
   # values.  Note that the BIOS may *correctly* report less than 640k of base
   # memory if the extended BIOS data area is located at the top of base memory
   # (as is the case on most recent systems).
   #options 	REALBASEMEM=639		# size of base memory (in KB)
   #options 	REALEXTMEM=15360	# size of extended memory (in KB)

   options		BUFCACHE=33		# some more buffer cache - HF

   # Standard system options

   options 	UCONSOLE	# users can use TIOCCONS (for xconsole)
   options 	INSECURE	# disable kernel security levels

   options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
   options 	NTP		# NTP phase/frequency locked loop

   options 	KTRACE		# system call tracing via ktrace(1)

   options 	SYSVMSG		# System V-like message queues
   options 	SYSVSEM		# System V-like semaphores
   options 	SYSVSHM		# System V-like memory sharing
   #options 	SHMMAXPGS=1024	# 1024 pages is the default

   options 	LKM		# loadable kernel modules

   # Diagnostic/debugging support options
   options 	DIAGNOSTIC	# cheap kernel consistency checks
   #options 	DEBUG		# expensive debugging checks/support
   #options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
   options 	DDB		# in-kernel debugger
   #options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
   #options 	KGDB		# remote debugger
   #options 	"KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
   #makeoptions	DEBUG="-g"	# compile full symbol table

   # Compatibility options
   options 	COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
   options 	COMPAT_09	# NetBSD 0.9,
   options 	COMPAT_10	# NetBSD 1.0,
   options 	COMPAT_11	# NetBSD 1.1,
   options 	COMPAT_12	# NetBSD 1.2,
   options 	COMPAT_13	# NetBSD 1.3,
   options 	COMPAT_14	# NetBSD 1.4,
   options 	COMPAT_43	# and 4.3BSD
   options 	COMPAT_386BSD_MBRPART # recognize old partition ID

   options 	COMPAT_SVR4	# binary compatibility with SVR4
   options 	COMPAT_IBCS2	# binary compatibility with SCO and ISC
   options 	COMPAT_LINUX	# binary compatibility with Linux
   options 	COMPAT_FREEBSD	# binary compatibility with FreeBSD

   options 	COMPAT_AOUT	# binary compat for NetBSD a.out binaries

   # File systems
   file-system 	FFS		# UFS
   #HF#file-system 	EXT2FS		# second extended file system (linux)
   file-system 	LFS		# log-structured file system
   file-system 	MFS		# memory file system
   file-system 	NFS		# Network File System client
   #HF#file-system 	NTFS		# Windows/NT file system (experimental)
   file-system 	CD9660		# ISO 9660 + Rock Ridge file system
   file-system 	MSDOSFS		# MS-DOS file system
   file-system 	FDESC		# /dev/fd
   file-system 	KERNFS		# /kern
   file-system 	NULLFS		# loopback file system
   #HF#file-system 	OVERLAY		# overlay file system
   file-system 	PORTAL		# portal filesystem (still experimental)
   file-system 	PROCFS		# /proc
   #HF#file-system 	UMAPFS		# NULLFS + uid and gid remapping
   file-system 	UNION		# union file system
   file-system	CODA		# Coda File System; also needs vcoda (below)

   # File system options
   #HF#options 	QUOTA		# UFS quotas
   #options 	FFS_EI		# FFS Endian Independent support
   #options 	SOFTDEP         # FFS soft updates support.
   options 	NFSSERVER	# Network File System server
   #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
   				# immutable) behave as system flags.

   # Pull in config fragments for kernel crypto.  This is required for
   # options IPSEC etc. to work. If you want to run with IPSEC, uncomment
   # one of these, based on whether you use crypto-us or crypto-intl, and
   # adjust the prefixes as necessary.

   #prefix ../crypto-us/sys
   #cinclude "conf/files.crypto-us"
   #prefix

   prefix ../crypto-intl/sys
   cinclude "conf/files.crypto-intl"
   prefix

   # Networking options
   options 	GATEWAY		# packet forwarding
   options 	INET		# IP + ICMP + TCP + UDP
   options 	INET6		# IPV6
   options 	IPSEC		# IP security
   options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
   #options 	IPSEC_DEBUG	# debug for IP security
   options 	MROUTING	# IP multicast routing
   #HF#options 	NS		# XNS
   #options 	NSIP		# XNS tunneling over IP
   #HF#options 	ISO,TPIP	# OSI
   #HF#options 	EON		# OSI tunneling over IP
   #HF#options 	CCITT,LLC,HDLC	# X.25
   #HF#options 	NETATALK	# AppleTalk networking protocols
   options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
   options 	PPP_DEFLATE	# Deflate compression support for PPP
   options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
   options 	PFIL_HOOKS	# pfil(9) packet filter hooks
   options 	IPFILTER_LOG	# ipmon(8) log support

   # Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
   #options 	TCP_COMPAT_42

   # These options enable verbose messages for several subsystems.
   # Warning, these may compile large string tables into the kernel!
   #HF#options 	EISAVERBOSE	# verbose EISA device autoconfig messages
   options 	MIIVERBOSE	# verbose PHY autoconfig messages
   options 	PCIVERBOSE	# verbose PCI device autoconfig messages
   #options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
   options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
   options 	SCSIVERBOSE	# human readable SCSI error messages
   options 	USBVERBOSE	# verbose USB device autoconfig messages
   #options 	PNPBIOSVERBOSE	# verbose PnP BIOS messages
   #options	PNPBIOSDEBUG	# more fullsome Pnp BIOS debugging messages
   #HF#options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM

   #
   # wscons options
   #
   # builtin terminal emulations
   #options 	WSEMUL_SUN		# sun terminal emulation
   options 	WSEMUL_VT100		# VT100 / VT220 emulation
   # different kernel output - see dev/wscons/wsdisplayvar.h
   options 	WS_KERNEL_FG=WSCOL_GREEN
   #options 	WS_KERNEL_BG=WSCOL_BLACK
   # compatibility to other console drivers
   options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
   options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
   options 	WSDISPLAY_COMPAT_USL		# VT handling
   options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
   # see dev/pckbc/wskbdmap_mfii.c for implemented layouts
   #options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
   # allocate a number of virtual screens at autoconfiguration time
   #options 	WSDISPLAY_DEFAULTSCREENS=4
   # use a large software cursor that doesn't blink
   options 	PCDISPLAY_SOFTCURSOR

   # Kernel root file system and dump configuration.
   config		netbsd	root on ? type ?
   #config		netbsd	root on sd0a type ffs
   #config		netbsd	root on ? type nfs

   #
   # Device configuration
   #

   mainbus0 at root

   apm0	at mainbus0			# Advanced power management

   # Tuning for power management, see apm(4) for more details.
   #options 	APM_NO_IDLE		# Don't call BIOS CPU idle function
   #options 	APM_V10_ONLY		# Use only the APM 1.0 calls
   #options 	APM_NO_POWEROFF		# Don't power off on halt(8)
   #options 	APM_POWER_PRINT		# Don't print stats on the console
   #options 	APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
   #options 	APM_FORCE_64KSEG	# Force memory to 64k
   #options 	APMDEBUG
   #options 	APMDEBUG_VALUE=0xFF
   #options 	APMCALLDEBUG


   # Basic Bus Support

   # Plug-and-Play BIOS and attached devices

   pnpbios*	at mainbus?

   # mainboard audio chips
   ess*		at pnpbios? index ?	# ESS AudioDrive
   sb*		at pnpbios? index ?	# NeoMagic 256AV in sb mode
   wss*		at pnpbios? index ?	# NeoMagic 256AV in wss mode
   ym*		at pnpbios? index ?	# OPL3-SA3

   # com port
   # If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
   # Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
   # will be no com0.  A side effect is pcmcia (and other) com? previously
   # starting at com3 may attach as com1 or com2.
   #com*		at pnpbios? index ?	# serial ports

   # parallel port
   # The above "com*" comments apply, cf. "lpt0" under "ISA parallel
   # "printer interfaces".
   #lpt*		at pnpbios? index ?	# parallel ports

   #pckbc*		at pnpbios? index ?	# PC keyboard/mouse controller
   #fdc*		at pnpbios? index ?	# floppy controller

   # IDE controller on Toshiba Portege 3000 series (crippled PCI device)
   pciide* at pnpbios? index ?

   # PCI bus support
   pci*	at mainbus? bus ?
   pci*	at pchb? bus ?
   pci*	at ppb? bus ?

   # Configure PCI using BIOS information
   options 	PCIBIOS			# PCI BIOS support
   options 	PCIBIOSVERBOSE		# PCI BIOS verbose info
   options 	PCIBIOS_INTR_FIXUP	# fixup PCI interrupt routing
   #options 	PCIBIOS_IRQS_HINT="0x0a00"	# PCI interrupts hint. IRQ 9 or 11
   #options 	PCIINTR_DEBUG		# super-verbose PCI interrupt fixup
   options 	PCIBIOS_BUS_FIXUP	# fixup PCI bus numbering
   options 	PCIBIOS_ADDR_FIXUP	# fixup PCI I/O addresses

   # PCI bridges
   pchb*	at pci? dev ? function ?	# PCI-Host bridges
   pceb*	at pci? dev ? function ?	# PCI-EISA bridges
   pcib*	at pci? dev ? function ?	# PCI-ISA bridges
   ppb*	at pci? dev ? function ?	# PCI-PCI bridges
   # XXX 'puc's aren't really bridges, but there's no better place for them here
   puc*	at pci? dev ? function ?	# PCI "universal" comm. cards

   # EISA bus support
   #HF#eisa*	at mainbus?
   #HF#eisa*	at pceb?

   # ISA bus support
   isa*	at mainbus?
   isa*	at pceb?
   isa*	at pcib?

   # PCMCIA bus support
   pcmcia*	at pcic? controller ? socket ?
   pcmcia*	at tcic? controller ? socket ?

   # ISA PCMCIA controllers
   pcic0	at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
   pcic1	at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
   tcic0	at isa? port 0x240 iomem 0xd0000 iosiz 0x10000

   # PCI PCMCIA controllers
   pcic0	at pci? dev? function ?

   # ISA Plug-and-Play bus support
   isapnp0	at isa?

   # ISA Plug-and-Play PCMCIA controllers
   pcic*	at isapnp?

   # CardBus bus support
   cbb*		at pci? dev ? function ?
   cardslot*	at cbb?	

   cardbus*	at cardslot?
   pcmcia* 	at cardslot?

   # Coprocessor Support

   # Math Coprocessor support
   npx0	at isa? port 0xf0 irq 13	# x86 math coprocessor


   # Console Devices

   # ISA console.  You can only configure one of these!
   #pc0	at isa? port 0x60 irq 1		# pccons generic PC console driver
   #vt0	at isa? port 0x60 irq 1		# PCVT console driver
   # Keyboard layout configuration for pccons
   #options 	FRENCH_KBD
   #options 	FINNISH_KBD
   #options 	GERMAN_KBD
   #options 	NORWEGIAN_KBD
   # pccons-specific option:
   #options 	XSERVER_DDB	# PF12 gets you into DDB when X is running
   # pccons/pcvt -specific option:
   #options 	XSERVER		# X server support


   # wscons
   pckbc0		at isa?			# pc keyboard controller
   pckbd*		at pckbc?		# PC keyboard
   # "opms" should not be enabled together with "pms" or "pmsi"
   pms*		at pckbc?		# PS/2 mouse for wsmouse
   pmsi*		at pckbc?		# PS/2 "Intelli"mouse for wsmouse
   #opms*		at pckbc?		# backwards compatible PS/2 mouse
   vga0		at isa?
   vga*		at pci? dev ? function ?
   #HF#pcdisplay0	at isa?			# CGA, MDA, EGA, HGA
   wsdisplay*	at vga? console ?
   #HF#wsdisplay*	at pcdisplay? console ?
   wskbd* 		at pckbd? console ?
   wsmouse*	at pms? mux 0
   wsmouse*	at pmsi? mux 0

   pcppi0		at isa?
   sysbeep0	at pcppi?

   # Serial Devices

   # PCI serial interfaces
   com*	at puc? port ?			# 16x50s on "universal" comm boards
   cy*	at pci? dev ? function ?	# Cyclades Cyclom-Y serial boards
   cz*	at pci? dev ? function ?	# Cyclades-Z multi-port serial boards

   # ISA Plug-and-Play serial interfaces
   com*	at isapnp?			# Modems and serial boards

   # PCMCIA serial interfaces
   com*	at pcmcia? function ?		# Modems and serial cards

   pcmcom*	at pcmcia? function ?		# PCMCIA multi-port serial cards
   com*	at pcmcom? slave ?		# ...and the slave devices

   # CardBus serial interfaces
   com*	at cardbus? function ?		# Modems and serial cards

   # ISA serial interfaces
   #options 	COM_HAYESP		# adds Hayes ESP serial board support
   #HF#com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
   #HF#com1	at isa? port 0x2f8 irq 3
   #HF#com2	at isa? port 0x3e8 irq 5
   #com3	at isa? port 0x2e8 irq 9
   #ast0	at isa? port 0x1a0 irq 5	# AST 4-port serial cards
   #com*	at ast? slave ?
   #boca0	at isa? port 0x100 irq 5	# BOCA 8-port serial cards
   #boca0	at isa? port 0x100 irq 5	# BOCA 16-port serial cards (BB2016)
   #boca1	at isa? port 0x140 irq 5	# this line is also needed for BB2016
   #com*	at boca? slave ?
   #tcom0	at isa? port 0x100 irq 7	# TC-800 8-port serial cards
   #com*	at tcom? slave ?
   #rtfps0	at isa? port 0x1230 irq 10	# RT 4-port serial cards
   #com*	at rtfps? slave ?
   #cy0	at isa? iomem 0xd4000 irq 12	# Cyclades serial cards
   #addcom0 at isa? port 0x108 irq 5	# Addonics FlexPort 8S
   #com*	at addcom? slave ?

   # Parallel Printer Interfaces

   # PCI parallel printer interfaces
   #HF#lpt*	at puc? port ?			# || ports on "universal" comm boards

   # ISA parallel printer interfaces
   lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports
   #HF#lpt1	at isa? port 0x278
   #HF#lpt2	at isa? port 0x3bc

   # LM7[89] and compatible hardware monitors
   #lm0	at isa?	port 0x290		# other common ports: 0x280, 0x310

   # VIA VT82C686A hardware monitor
   viapm*	at pci? dev ? function ?
   viaenv*	at viapm?

   # SCSI Controllers and Devices

   # PCI SCSI controllers
   #HF#adv*	at pci? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI
   #HF#adw*	at pci? dev ? function ?	# AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
   #HF#ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
   #HF#bha*	at pci? dev ? function ?	# BusLogic 9xx SCSI
   #HF#dpt*	at pci? dev ? function ?	# DPT SmartCache/SmartRAID
   #HF#isp*	at pci? dev ? function ?	# Qlogic ISP [12]0x0 SCSI/FibreChannel
   #HF#ncr*	at pci? dev ? function ?	# NCR 53c8xx SCSI
   #siop*	at pci? dev ? function ?	# Symbios 53c8xx SCSI (experimental)
   #HF#pcscp*	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI

   # EISA SCSI controllers
   #HF#ahb*	at eisa? slot ?			# Adaptec 174[02] SCSI
   #HF#ahc*	at eisa? slot ?			# Adaptec 274x, aic7770 SCSI
   #HF#bha*	at eisa? slot ?			# BusLogic 7xx SCSI
   #HF#dpt*	at eisa? slot ?			# DPT EATA SCSI
   #HF#uha*	at eisa? slot ?			# UltraStor 24f SCSI

   # PCMCIA SCSI controllers
   aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI
   esp*	at pcmcia? function ?		# Qlogic ESP406/FAS408 SCSI

   # ISA Plug-and-Play SCSI controllers
   #HF#aha*	at isapnp? 			# Adaptec AHA-154[02
   #HF#aic*	at isapnp?			# Adaptec AHA-1520B

   # ISA SCSI controllers
   #HF#adv0	at isa? port ? irq ? drq ?	# AdvanSys APB-514[02]
   #HF#aha0	at isa? port 0x330 irq ? drq ?	# Adaptec 154[02] SCSI
   #HF#aha1	at isa? port 0x334 irq ? drq ?
   #HF#ahc0	at isa? port ? irq ?		# Adaptec 284x SCSI
   #HF#aic0	at isa? port 0x340 irq 11	# Adaptec 152[02] SCSI
   #HF#bha0	at isa? port 0x330 irq ? drq ?	# BusLogic [457]4X SCSI
   #HF#bha1	at isa? port 0x334 irq ? drq ?
   # The "nca" and "dpt" probes might give false hits or hang your machine.
   #dpt0	at isa? port 0x170 irq ? drq ?	# DPT SmartCache/SmartRAID
   #nca0	at isa? port 0x360 irq 15	# Port-mapped NCR 53C80 contoller
   #nca1	at isa? iomem 0xd8000 irq 5	# Memory-mapped controller (T128, etc.)
   #HF#sea0	at isa? iomem 0xc8000 irq 5	# Seagate/Future Domain SCSI
   #HF#uha0	at isa? port 0x330 irq ? drq ?	# UltraStor [13]4f SCSI
   #HF#uha1	at isa? port 0x340 irq ? drq ?
   #HF#wds0	at isa? port 0x350 irq 15 drq 6	# WD7000 and TMC-7000 controllers
   #HF#wds1	at isa? port 0x358 irq 11 drq 5

   # CardBus SCSI cards
   ahc*	at cardbus? dev ? function ?	# Adaptec ADP-1480

   # SCSI bus support
   #HF#scsibus* at adv?
   #HF#scsibus* at adw?
   #HF#scsibus* at aha?
   #HF#scsibus* at ahb?
   scsibus* at ahc?
   scsibus* at aic?
   #HF#scsibus* at bha?
   #HF#scsibus* at dpt?
   scsibus* at esp?
   #HF#scsibus* at isp?
   #scsibus* at nca?
   #HF#scsibus* at ncr?
   #HF#scsibus* at pcscp?
   #HF#scsibus* at sea?
   #scsibus at siop?
   #HF#scsibus* at uha?
   #HF#scsibus* at wds?

   # SCSI devices
   sd*	at scsibus? target ? lun ?	# SCSI disk drives
   st*	at scsibus? target ? lun ?	# SCSI tape drives
   cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
   ch*	at scsibus? target ? lun ?	# SCSI autochangers
   ss*	at scsibus? target ? lun ?	# SCSI scanners
   ses*	at scsibus? target ? lun ?	# SCSI Enclosure Services devices
   uk*	at scsibus? target ? lun ?	# SCSI unknown

   # RAID controllers and devices
   #HF#cac*	at pci? dev ? function ?	# Compaq array controller
   #HF#ca*	at cac? unit ?			# Compaq array disk device

   # IDE and related devices
   # PCI IDE controllers - see pciide(4) for supported hardware.
   # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
   # how to set up DMA modes for this chip. This may work, or may cause
   # a machine hang with some controllers.
   pciide* at pci? dev ? function ? flags 0x0000

   # ISA Plug-and-Play IDE controllers
   wdc*	at isapnp? 

   # PCMCIA IDE controllers
   wdc*	at pcmcia? function ?

   # ISA ST506, ESDI, and IDE controllers
   # Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
   # fall back to 16bits I/O if 32bits I/O are not functional).
   # Some controllers pass the initial 32bit test, but will fail later.
   wdc0	at isa? port 0x1f0 irq 14 flags 0x00
   wdc1	at isa? port 0x170 irq 15 flags 0x00

   # IDE drives
   # Flags are used only with controllers that support DMA operations
   # and mode settings (e.g. some pciide controllers)
   # The lowest order four bits (rightmost digit) of the flags define the PIO
   # mode to use, the next set of four bits the DMA mode and the third set the
   # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
   # to use, and the last bit must be 1 for this setting to be used.
   # For DMA and UDMA, 0xf (1111) means 'disable'.
   # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
   # (0xc=1100, 0xa=1010, 0xf=1111)
   # 0x0000 means "use whatever the drive claims to support".
   wd*	at wdc? channel ? drive ? flags 0x0000
   wd*	at pciide? channel ? drive ? flags 0x0000

   # ATAPI bus support
   atapibus* at wdc? channel ?
   atapibus* at pciide? channel ?

   # ATAPI devices
   # flags have the same meaning as for IDE drives.
   cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
   sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
   uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown


   # Miscellaneous mass storage devices

   # ISA floppy
   fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
   #fdc1	at isa? port 0x370 irq ? drq ?
   fd*	at fdc? drive ?			# the drives themselves
   # some machines need you to do this instead of fd*
   #fd0	at fdc0 drive 0

   # ISA CD-ROM devices
   #mcd0	at isa? port 0x300 irq 10	# Mitsumi CD-ROM drives

   # ISA tape devices
   # note: the wt driver conflicts unpleasantly with SMC boards at the
   # same I/O address. The probe reprograms their EEPROMs. Don't
   # uncomment it unless you are actually using it.
   #wt0	at isa? port 0x308 irq 5 drq 1	# Archive and Wangtek QIC tape drives


   # Network Interfaces

   # PCI network interfaces
   #HF#de*	at pci? dev ? function ?	# DEC 21x4x-based Ethernet
   #HF#en*	at pci? dev ? function ?	# ENI/Adaptec ATM
   #HF#ep*	at pci? dev ? function ?	# 3Com 3c59x
   #HF#ex*	at pci? dev ? function ?	# 3Com 90x[B]
   #HF#epic*	at pci? dev ? function ?	# SMC EPIC/100 Ethernet
   #HF#esh*	at pci? dev ? function ?	# Essential HIPPI card
   #HF#fpa*	at pci? dev ? function ?	# DEC DEFPA FDDI
   #HF#fxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
   #HF#le*	at pci? dev ? function ?	# PCnet-PCI Ethernet
   #HF#lmc*	at pci? dev ? function ?	# Lan Media Corp SSI/HSSI/DS3
   #HF#ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet
   #HF#ntwoc* at pci? dev ? function ?	# Riscom/N2 PCI Sync Serial
   #HF#rtk*	at pci? dev ? function ?	# Realtek 8129/8139
   #HF#sip*	at pci? dev ? function ?	# SiS 900 Ethernet
   #HF#ti*	at pci? dev ? function ?	# Alteon ACEnic gigabit Ethernet
   #HF#tl*	at pci? dev ? function ?	# ThunderLAN-based Ethernet
   #HF#tlp*	at pci? dev ? function ?	# DECchip 21x4x (and clones) Ethernet
   #options 	TLP_MATCH_21040
   #options 	TLP_MATCH_21041
   #options 	TLP_MATCH_21140
   #options 	TLP_MATCH_21142
   #HF#vr*	at pci? dev ? function ?	# VIA Rhine Fast Ethernet

   # EISA network interfaces
   #HF#ep*	at eisa? slot ?			# 3Com 3c579 Ethernet
   #HF#fea*	at eisa? slot ?			# DEC DEFEA FDDI
   #HF#tlp*	at eisa? slot ?			# DEC DE-425 Ethernet

   # ISA Plug-and-Play network interfaces
   #HF#ep*	at isapnp?			# 3Com 3c509 Ethernet
   #HF#ne*	at isapnp?			# NE2000-compatible Ethernet
   #HF#tr*	at isapnp?			# IBM/3COM TROPIC Token-Ring

   # PCMCIA network interfaces
   awi*	at pcmcia? function ?		# BayStack 650/660 (802.11FH/DS)
   cnw*	at pcmcia? function ?		# Xircom/Netwave AirSurfer
   ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
   mbe*	at pcmcia? function ?		# MB8696x based Ethernet
   ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
   ray*	at pcmcia? function ?		# Raytheon Raylink (802.11)
   sm*	at pcmcia? function ?		# Megahertz Ethernet
   wi*	at pcmcia? function ?		# Lucent WaveLan IEEE (802.11)
   #xe*	at pcmcia? function ?		# Xircom PCMCIA cards
   #HF#options	PCIC_ISA_ALLOC_IOBASE=0x400
   #HF#options	PCIC_ISA_ALLOC_IOSIZE=0x40

   mhzc*	at pcmcia? function ?		# Megahertz Ethernet/Modem combo cards
   com*	at mhzc?
   sm*	at mhzc?

   # ISA network interfaces
   #HF#ate0	at isa? port 0x2a0 irq ?		# AT1700
   #HF#cs0	at isa? port 0x300 iomem ? irq ? drq ?	# CS8900 Ethernet
   #HF#ec0	at isa? port 0x250 iomem 0xd8000 irq 9	# 3Com 3c503 Ethernet
   #HF#eg0	at isa? port 0x280 irq 9		# 3C505 ethernet cards
   #HF#el0	at isa? port 0x300 irq 9		# 3C501 ethernet cards
   #HF#ep*	at isa? port ? irq ?			# 3C509 ethernet cards
   #HF#ef0	at isa? port 0x360 iomem 0xd0000 irq 7	# 3C507
   #HF#ai0	at isa? port 0x360 iomem 0xd0000 irq 7	# StarLAN
   #HF#fmv0	at isa? port 0x2a0 irq ?		# FMV-180 series
   #HF#ix0	at isa? port 0x300 irq 10		# EtherExpress/16
   #HF#iy0	at isa? port 0x360 irq ?		# EtherExpress PRO 10 ISA
   #HF#lc0	at isa? port 0x320 iomem ? irq ?	# DEC EtherWORKS III (LEMAC)
   #depca0	at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5	# DEPCA
   #le*	at depca?
   #HF#nele0	at isa? port 0x320 irq 9 drq 7		# NE2100
   #HF#le*	at nele?
   #ntwoc0	at isa? port 0x300 irq 5 iomem 0xc8000 flags 1	# Riscom/N2 sync serial
   #HF#bicc0	at isa? port 0x320 irq 10 drq 7		# BICC IsoLan
   #HF#le*	at bicc?
   #HF#ne0	at isa? port 0x280 irq 9		# NE[12]000 ethernet cards
   #HF#ne1	at isa? port 0x300 irq 10
   #HF#sm0	at isa? port 0x300 irq 10		# SMC91C9x Ethernet
   #HF#tr0	at isa? port 0xa20 iomem 0xd8000 irq ?  # IBM TROPIC based Token-Ring
   #HF#tr1	at isa? port 0xa24 iomem 0xd0000 irq ?  # IBM TROPIC based Token-Ring
   #HF#tr*	at isa? port ? irq ?			# 3COM TROPIC based Token-Ring
   #HF#we0	at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC Ethernet
   #HF#we1	at isa? port 0x300 iomem 0xcc000 irq 10

   # CardBus network cards
   ex*	at cardbus? dev ? function ?	# 3Com 3C575TX
   fxp*	at cardbus? dev ? function ?	# Intel i8255x
   rtk*	at cardbus? dev ? function ?	# Realtek 8129/8139
   tlp*	at cardbus? dev ? function ?	# DECchip 21143

   # MII/PHY support
   dmphy*	at mii? phy ?			# Davicom DM9101 PHYs
   exphy*	at mii? phy ?			# 3Com internal PHYs
   icsphy*	at mii? phy ?			# Integrated Circuit Systems ICS1890
   inphy*	at mii? phy ?			# Intel 82555 PHYs
   iophy*	at mii? phy ?			# Intel 82553 PHYs
   lxtphy*	at mii? phy ?			# Level One LXT-970 PHYs
   nsphy*	at mii? phy ?			# NS83840 PHYs
   nsphyter* at mii? phy ?			# NS83843 PHYs
   qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
   sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
   tlphy*	at mii? phy ?			# ThunderLAN PHYs
   tqphy*	at mii? phy ?			# TDK Semiconductor PHYs
   ukphy*	at mii? phy ?			# generic unknown PHYs

   # USB Controller and Devices

   # PCI USB controllers
   ohci*	at pci?	dev ? function ?	# Open Host Controller
   #HF#uhci*	at pci?	dev ? function ?	# Universal Host Controller (Intel)

   # CardBus USB controllers
   #HF#ohci*	at cardbus? dev ? function ?	# Open Host Controller

   # USB bus support
   usb*	at ohci?
   #HF#usb*	at uhci?

   # USB Hubs
   uhub*	at usb?
   uhub*	at uhub? port ? configuration ? interface ?

   # USB Mice
   ums*	at uhub? port ? configuration ? interface ?
   wsmouse*	at ums? mux 0

   # USB Keyboards
   ukbd*	at uhub? port ? configuration ? interface ?
   wskbd*	at ukbd? console ? mux 1

   # USB Generic HID devices
   uhid*	at uhub? port ? configuration ? interface ?

   # USB Printer
   ulpt*	at uhub? port ? configuration ? interface ?

   # USB Modem
   umodem*	at uhub? port ? configuration ?
   ucom*	at umodem?

   # USB Mass Storage
   umass*	at uhub? port ? configuration ? interface ?
   atapibus* at umass? channel ?
   scsibus* at umass? channel ?

   # USB audio
   uaudio*	at uhub? port ? configuration ?

   # USB Ethernet adapters
   aue*	at uhub? port ?		# ADMtek AN986 Pegasus based adapters
   cue*	at uhub? port ?		# CATC USB-EL1201A based adapters
   kue*	at uhub? port ?		# Kawasaki LSI KL5KUSB101B based adapters

   # Prolofic PL2301/PL2302 host-to-host adapter
   upl*	at uhub? port ?

   # Serial adapters
   # FTDI FT8U100AX serial adapter
   uftdi*	at uhub? port ?
   ucom*	at uftdi? portno ?

   # Diamond Multimedia Rio 500
   urio*	at uhub? port ?

   # USB Handspring Visor
   uvisor*	at uhub? port ?
   ucom*	at uvisor?

   # USB Generic driver
   ugen*	at uhub? port ?

   # Audio Devices

   # PCI audio devices
   #HF#auvia*	at pci? dev ? function ?	# VIA VT82C686A integrated AC'97 Audio
   #HF#clcs*	at pci? dev ? function ?	# Cirrus Logic CS4280
   #HF#cmpci*	at pci? dev ? function ?	# C-Media CMI8338/8738
   #HF#eap*	at pci? dev ? function ?	# Ensoniq AudioPCI
   #HF#eso*	at pci? dev ? function ?	# ESS Solo-1 PCI AudioDrive
   #HF#fms*	at pci? dev ? function ?	# Forte Media FM801
   #HF#sv*	at pci? dev ? function ?	# S3 SonicVibes

   # ISA Plug-and-Play audio devices
   #HF#ess*	at isapnp?			# ESS Tech ES1887, ES1888, ES888 audio
   #HF#guspnp*	at isapnp?			# Gravis Ultra Sound PnP audio
   #HF#sb*	at isapnp?			# SoundBlaster-compatible audio
   #HF#wss*	at isapnp?			# Windows Sound System
   #HF#ym*	at isapnp?			# Yamaha OPL3-SA3 audio

   # ISA audio devices
   # the "aria" probe might give false hits
   #aria0	at isa? port 0x290 irq 10 		# Aria
   #ess0	at isa? port 0x220 irq 5 drq 1 drq2 5	# ESS 18XX
   #HF#gus0	at isa? port 0x220 irq 7 drq 1 drq2 6	# Gravis Ultra Sound
   #HF#pas0	at isa? port 0x220 irq 7 drq 1		# ProAudio Spectrum
   #HF#pss0	at isa? port 0x220 irq 7 drq 6  	# Personal Sound System
   #HF#sp0	at pss0 port 0x530 irq 10 drq 0		# 	sound port driver
   #HF#sb0	at isa? port 0x220 irq 5 drq 1 drq2 5	# SoundBlaster
   #HF#wss0	at isa? port 0x530 irq 10 drq 0	drq2 1	# Windows Sound System

   #cms0	at isa? port 0x220			# Creative Music System

   # OPL[23] FM synthesizers
   #opl0	at isa? port 0x388	# use only if not attached to sound card
   #HF#opl*	at eso?
   #HF#opl*	at ess?
   #HF#opl*	at fms?
   #HF#opl*	at sb?
   #HF#opl*	at sv?
   #HF#opl*	at wss?
   #HF#opl*	at ym?

   # Audio support
   #audio*	at aria?
   #HF#audio*	at auvia?
   #HF#audio*	at clcs?
   #HF#audio*	at cmpci?
   #HF#audio*	at eap?
   #HF#audio*	at eso?
   #HF#audio*	at ess?
   #HF#audio*	at fms?
   #HF#audio*	at gus?
   #HF#audio*	at guspnp?
   #HF#audio*	at pas?
   #HF#audio*	at sb?
   #HF#audio*	at sp?
   #HF#audio*	at sv?
   audio*	at uaudio?
   #HF#audio*	at wss?
   #HF#audio*	at ym?

   # MPU 401 UARTs
   #mpu*	at isa? port 0x330 irq 9        # MPU401 or compatible card
   #HF#mpu*	at eso?
   #HF#mpu*	at fms?
   #HF#mpu*	at sb?
   #HF#mpu*	at ym?

   # MIDI support
   #midi*	at cms?			# Creative Music System
   #HF#midi*	at eap?			# 137[01] MIDI port
   #HF#midi*	at mpu?			# MPU 401
   #HF#midi*	at opl?			# OPL FM synth
   #HF#midi*	at pcppi?		# MIDI interface to the PC speaker
   #HF#midi*	at sb?			# SB1 MIDI port

   # The spkr driver provides a simple tone interface to the built in speaker.
   spkr0	at pcppi?		# PC speaker

   # TV cards

   # Brooktree 848/849/878/879 based TV cards
   #HF#bktr* at pci? dev ? function ?


   # Mice

   # ISA busmice
   #HF#lms0	at isa? port 0x23c irq 5	# Logitech bus mouse
   #HF#lms1	at isa? port 0x238 irq 5
   #HF#mms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
   #HF#mms1	at isa? port 0x238 irq 5
   #HF#wsmouse*	at lms? mux 0
   #HF#wsmouse*	at mms? mux 0
   # backwards compatible versions
   #olms0	at isa? port 0x23c irq 5	# Logitech bus mouse
   #olms1	at isa? port 0x238 irq 5
   #omms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
   #omms1	at isa? port 0x238 irq 5
   #opms0	at pc? irq 12		# PS/2 auxiliary port mouse
   #opms0	at vt? irq 12		# PS/2 auxiliary port mouse


   # Joysticks

   # ISA Plug-and-Play joysticks
   #HF#joy*	at isapnp?			# Game ports (usually on audio cards)

   # PCI joysticks
   #HF#joy*	at pci?				# Game ports (usually on audio cards)

   # ISA joysticks. Probe is a little strange; add only if you have one.
   #joy0	at isa? port 0x201


   # Miscellaneous Devices

   # Planetconnect Satellite receiver driver.
   #satlink0 at isa? port 0x300 drq 1


   # Pull in optional local configuration
   include	"arch/i386/conf/GENERIC.local"


   # Pseudo-Devices

   # disk/mass storage pseudo-devices
   pseudo-device	ccd		4	# concatenated/striped disk devices
   #pseudo-device	raid		4	# RAIDframe disk driver
   #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
   pseudo-device	md		1	# memory disk device (ramdisk)
   pseudo-device	vnd		4	# disk-like interface to files

   # network pseudo-devices
   pseudo-device	bpfilter	8	# Berkeley packet filter
   #HF#pseudo-device	ipfilter		# IP filter (firewall) and NAT
   pseudo-device	loop			# network loopback
   pseudo-device	ppp		2	# Point-to-Point Protocol
   #HF#pseudo-device	sl		2	# Serial Line IP
   #HF#pseudo-device	strip		2	# Starmode Radio IP (Metricom)
   pseudo-device	tun		2	# network tunneling over tty
   pseudo-device	gre		2	# generic L3 over IP tunnel
   pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
   pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
   pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
   #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation

   # miscellaneous pseudo-devices
   pseudo-device	pty		64	# pseudo-terminals
   pseudo-device	tb		1	# tablet line discipline
   pseudo-device	sequencer	1	# MIDI sequencer
   # rnd works; RND_COM does not on port i386 yet.
   pseudo-device	rnd			# /dev/random and in-kernel generator
   #options 	RND_COM			# use "com" randomness as well (BROKEN)

   # a pseudo device needed for Coda	# also needs CODA (above)
   pseudo-device	vcoda		4	# coda minicache <-> venus comm.

   # mouse & keyboard multiplexor pseudo-devices
   pseudo-device	wsmux		2
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->feedback 
State-Changed-By: mycroft 
State-Changed-When: Sat Jul 3 23:51:27 UTC 2004 
State-Changed-Why:  
Was this ever fixed?  There have been no other reports of lossage like this 
in years. 


Responsible-Changed-From-To: port-i386-maintainer->mycroft 
Responsible-Changed-By: mycroft 
Responsible-Changed-When: Sat Jul 3 23:51:27 UTC 2004 
Responsible-Changed-Why:  
. 

From: Hubert Feyrer <hubert@feyrer.de>
To: gnats-bugs@gnats.netbsd.org
Cc: mycroft@netbsd.org, port-i386-maintainer@netbsd.org
Subject: Re: port-i386/10267
Date: Sun, 4 Jul 2004 05:19:48 +0200 (CEST)

 On Sun, 3 Jul 2004 mycroft@netbsd.org wrote:
 > Synopsis: PCIBIOS hangs(?)
 > State-Changed-From-To: open->feedback
 > State-Changed-Why:
 > Was this ever fixed?  There have been no other reports of lossage like this
 > in years.

 I don't have access to that machine any more, and haven't had any problems
 with PCIBIOS recently. Maybe close the PR for now. Thanks!


  - Hubert

 -- 
                          ,,_
 If wishes were wings,  o"   )~  would fly.            -- Go www.NetBSD.org!
                         ''''
State-Changed-From-To: feedback->closed 
State-Changed-By: mycroft 
State-Changed-When: Sun Jul 4 03:50:16 UTC 2004 
State-Changed-Why:  
See user's reply. 
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.