NetBSD Problem Report #10439
Received: (qmail 4591 invoked from network); 25 Jun 2000 11:28:51 -0000
Message-Id: <200006251128.EAA06922@nbwww.isc.org>
Date: Sun, 25 Jun 2000 04:28:51 -0700 (PDT)
From: perrancan@yahoo.com
Reply-To: perrancan@yahoo.com
To: gnats-bugs@gnats.netbsd.org
Subject: Sun3: kernel compile fails with SunOS compatibility enabled
X-Send-Pr-Version: www-1.0
>Number: 10439
>Category: kern
>Synopsis: Sun3: kernel compile fails with SunOS compatibility enabled
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: kern-bug-people
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sun Jun 25 11:29:01 +0000 2000
>Closed-Date: Sat Dec 16 08:54:16 +0000 2000
>Last-Modified: Sat Dec 16 08:54:16 +0000 2000
>Originator: Daniel Dickinson
>Release: 1.4.2
>Organization:
>Environment:
NetBSD kyrie 1.4.2 NetBSD 1.4.2 (KYRIE_142) #0: Sun Jun 11 01:55:32 EDT 2000 perran@kyrie:/usr/src/sys/arch/sun3/compile/KYRIE_142 sune
>Description:
compile of kernel with SunOS compatibility fails with message:
make: don't know how to make ../../m68kcsysctl.h. Stop
*** Error code 2
After that problem is corrected the message refers to
ma/hine/reg.h
>How-To-Repeat:
enable SunOS compatibility
compile kernel on Sun3 machine
>Fix:
In <machine-name>/lib/compat/.depend
change m68kcsysctl.h to m68k/sysctl.h
and ma/hine/reg.h to machine/reg.h
I don't know the config file format so I haven't backtracked to find the source of the error
which is obviously in one of the config files.
>Release-Note:
>Audit-Trail:
From: Thomas Klausner <wiz@danbala.ifoer.tuwien.ac.at>
To: perrancan@yahoo.com
Cc: gnats-bugs@gnats.netbsd.org, netbsd-bugs@netbsd.org
Subject: Re: kern/10439: Sun3: kernel compile fails with SunOS compatibility enabled
Date: Sun, 25 Jun 2000 14:52:20 +0200
Mutt made be believe that perrancan@yahoo.com wrote:
> >Number: 10439
> >Category: kern
> >Synopsis: Sun3: kernel compile fails with SunOS compatibility enabled
...
> >Fix:
> In <machine-name>/lib/compat/.depend
> change m68kcsysctl.h to m68k/sysctl.h
> and ma/hine/reg.h to machine/reg.h
>
> I don't know the config file format so I haven't backtracked to find the source of the error
> which is obviously in one of the config files.
This very much looks like a problem with your memory, or perhaps your
hard discs. A recursive grep over the whole kernel source reveals no
single occurance of m68kcsysctl.h.
Try checking your memory with memtest86 or memtester, which you should
be able to find on freshmeat (www.freshmeat.net).
Bye,
Thomas
--
Thomas Klausner - wiz@danbala.tuwien.ac.at
I wanted to emulate some of my heroes, but I didn't know their
op-codes. --dowe
From: nathanw@MIT.EDU (Nathan J. Williams)
To: Thomas Klausner <wiz@danbala.ifoer.tuwien.ac.at>
Cc: perrancan@yahoo.com, gnats-bugs@gnats.netbsd.org, netbsd-bugs@netbsd.org
Subject: Re: kern/10439: Sun3: kernel compile fails with SunOS compatibility enabled
Date: 25 Jun 2000 10:59:25 -0400
> Try checking your memory with memtest86 or memtester, which you should
> be able to find on freshmeat (www.freshmeat.net).
That's not going to work so well on a sun3 box.
Better to set diagnostic mode and use the built-in tests in the
firmware.
- Nathan
From: Bill Sommerfeld <sommerfeld@orchard.arlington.ma.us>
To: perrancan@yahoo.com
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/10439: Sun3: kernel compile fails with SunOS compatibility enabled
Date: Sun, 25 Jun 2000 11:21:16 -0400
> >Fix:
> In <machine-name>/lib/compat/.depend
> change m68kcsysctl.h to m68k/sysctl.h
> and ma/hine/reg.h to machine/reg.h
The .depend files are dynamically built during the "make depend"
phase; they are not part of the source tree.
If you're seeing glitches like this, I'd suspect hardware trouble with
your sun3 ..
- Bill
From: "Daniel F. Dickinson" <perrancan@yahoo.com>
To: Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/10439: Sun3: kernel compile fails with SunOS compatibility
enabled
Date: Sun, 25 Jun 2000 17:41:19 -0400
Sorry about the bug report. The SCSI hardware isn't working right (as
discovered by using the onboard diagnostics). Now to find out if I can
do anything about it or if it's a goner.
Bill Sommerfeld wrote:
>
> > >Fix:
> > In <machine-name>/lib/compat/.depend
> > change m68kcsysctl.h to m68k/sysctl.h
> > and ma/hine/reg.h to machine/reg.h
>
> The .depend files are dynamically built during the "make depend"
> phase; they are not part of the source tree.
>
> If you're seeing glitches like this, I'd suspect hardware trouble with
> your sun3 ..
>
> - Bill
--
Perran aka Dox aka |All opinions are mine and mine only..| /---\
Daniel F. Dickinson |unless you agree with me. || o o |
perran@geocities.com |http://www.amazon.com : bookstore || ? |
http://www.geocities.com/~perran : My homepage || \-/ |
http://earth.ics.uci.edu:8080 for talk.origins archives | \---/
State-Changed-From-To: open->closed
State-Changed-By: chs
State-Changed-When: Sat Dec 16 00:53:29 PST 2000
State-Changed-Why:
submitter reports the problem was flaky hardware.
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.