NetBSD Problem Report #15065

Received: (qmail 9977 invoked from network); 27 Dec 2001 16:47:04 -0000
Message-Id: <200112271646.fBRGkqo04875@sam.forinstance.com>
Date: Thu, 27 Dec 2001 11:46:52 -0500 (EST)
From: jgoerzen@complete.org
Reply-To: jgoerzen@complete.org
To: gnats-bugs@gnats.netbsd.org
Cc: jgoerzen@complete.org
Subject: New package: grub 0.90
X-Send-Pr-Version: 3.95

>Number:         15065
>Category:       pkg
>Synopsis:       New package: grub 0.90
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    pkg-manager
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Dec 27 16:48:00 +0000 2001
>Closed-Date:    Thu Apr 11 19:59:33 +0000 2002
>Last-Modified:  Thu Apr 11 19:59:33 +0000 2002
>Originator:     
>Release:        NetBSD 1.5ZA
>Organization:
>Environment:
System: NetBSD sam 1.5ZA NetBSD 1.5ZA (SAM) #1: Mon Dec 24 11:09:54 EST 2001 root@sam:/home/usr2/src/sys/arch/i386/compile/SAM i386
Architecture: i386
Machine: i386
>Description:
I have packaged GRUB, the GRand Unified Bootloader for NetBSD.  This
packaging has also involved modifications to grub-install to make is
properly grok NetBSD /dev entries and to install in a location that works
for NetBSD.  No other modifications were required.

This package is pkglint-clean.

Source tarball (extract underneath /usr/pkgsrc) is available at:
gopher://quux.org/9/devel/netbsd/packages/netbsd-grub-0.90.tar.gz

(Gopher-impaired?  lynx -dump $URL > file.tar.gz will work well)
SHA1 (netbsd-grub-0.90.tar.gz) = daa870c5e3c7eb68fd285c99ae2c42a6a439eba1

There is also a pre-built i386 package at
gopher://quux.org/1/devel/netbsd/packages

I have tested this package and It Works For Me (TM).  I have used GRUB
extensively under other OSs and all seems to be well here.

Any questions -- contact me <jgoerzen@complete.org>.

>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:

From: Hubert Feyrer <hubert.feyrer@informatik.fh-regensburg.de>
To: jgoerzen@complete.org
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: pkg/15065: New package: grub 0.90
Date: Fri, 28 Dec 2001 04:03:07 +0100 (MET)

 On Thu, 27 Dec 2001 jgoerzen@complete.org wrote:
 > I have tested this package and It Works For Me (TM).  I have used GRUB
 > extensively under other OSs and all seems to be well here.

 1.5.3ALPHA/i386:

 checking for .code16 addr32 assembler support... no
 configure: error: GRUB requires GAS .code16 addr32 support; upgrade your binutils
 *** Error code 1


  - Hubert

 -- 
 Want to get a clue on IPv6 but don't know where to start? Try this:
 * Basics -> http://www.onlamp.com/pub/a/onlamp/2001/05/24/ipv6_tutorial.html
 * Setup  -> http://www.onlamp.com/pub/a/onlamp/2001/06/01/ipv6_tutorial.html 
 Of course with your #1 IPv6 ready operating system -> http://www.NetBSD.org/


From: John Goerzen <jgoerzen@complete.org>
To: Hubert Feyrer <hubert.feyrer@informatik.fh-regensburg.de>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: pkg/15065: New package: grub 0.90
Date: 28 Dec 2001 09:01:42 -0500

 Hubert,

 The GRUB manual talks a lot about having a current binutils.  I tried
 it with a -current from 24th Dec. and it worked fine with that.  It is
 possible that it won't work with 1.5.2.  I don't know how to indicate
 this dependency in the package given that binutils is not a package
 but a part of the base system.

 Also, GRUB will work only on i386.  I also don't know how to indicate
 that in the packaging.

 Any suggestions would be welcome.  You can try out the binary package
 at the listed site if you don't believe me :-)

 Thanks,
 John Goerzen

 Hubert Feyrer <hubert.feyrer@informatik.fh-regensburg.de> writes:

 > On Thu, 27 Dec 2001 jgoerzen@complete.org wrote:
 > > I have tested this package and It Works For Me (TM).  I have used GRUB
 > > extensively under other OSs and all seems to be well here.
 > 
 > 1.5.3ALPHA/i386:
 > 
 > checking for .code16 addr32 assembler support... no
 > configure: error: GRUB requires GAS .code16 addr32 support; upgrade your binutils
 > *** Error code 1
 > 
 > 
 >  - Hubert
 > 
 > -- 
 > Want to get a clue on IPv6 but don't know where to start? Try this:
 > * Basics -> http://www.onlamp.com/pub/a/onlamp/2001/05/24/ipv6_tutorial.html
 > * Setup  -> http://www.onlamp.com/pub/a/onlamp/2001/06/01/ipv6_tutorial.html 
 > Of course with your #1 IPv6 ready operating system -> http://www.NetBSD.org/
 > 

 -- 
 John Goerzen <jgoerzen@complete.org>    GPG: 0x8A1D9A1F    www.complete.org
State-Changed-From-To: open->closed 
State-Changed-By: magick 
State-Changed-When: Thu Apr 11 12:59:12 PDT 2002 
State-Changed-Why:  
I submitted your package. I updated it to 0.91  
and removed the patch that you already sent to  
the grub developers. Thanks for the submission.  
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.