NetBSD Problem Report #17193

Received: (qmail 28483 invoked by uid 605); 8 Jun 2002 14:00:32 -0000
Message-Id: <200206081359.g58DxqD29208@power.cnet.aladdin.de>
Date: Sat, 8 Jun 2002 15:59:52 +0200 (CEST)
From: Christian Groessler <cpg@aladdin.de>
Sender: gnats-bugs-owner@netbsd.org
Reply-To: cpg@aladdin.de
To: gnats-bugs@gnats.netbsd.org
Subject: mb86960 driver supports word more only
X-Send-Pr-Version: 3.95

>Number:         17193
>Category:       kern
>Synopsis:       mb86960 driver supports word more only
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    tsutsui
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Jun 08 14:01:01 +0000 2002
>Closed-Date:    Tue Dec 24 13:20:36 +0000 2002
>Last-Modified:  Tue Dec 24 13:20:36 +0000 2002
>Originator:     Christian Groessler
>Release:        NetBSD 1.6_BETA1
>Organization:
at home
>Environment:


System: NetBSD power.cnet.aladdin.de 1.6_BETA1 NetBSD 1.6_BETA1 (POWER) #0: Fri May 31 20:10:13 CEST 2002 chris@power.cnet.aladdin.de:/local/netbsdsrc-1.6/src/sys/arch/macppc/compile/POWER macppc
Architecture: powerpc
Machine: macppc
>Description:
	The mb86960 driver supports only the word (16 bit) mode bus
interface of the chip. The upcoming Dreamcast LAN adapter driver needs
byte mode. I've attached a patch which implements this support.
There is still one unniceness in the mb86960_attach() function - it
always sets word size, maybe this should become a parameter to the
function. Currently it's no real problem, since there are only 2 byte
sized i/os made afterwards in this function.

>How-To-Repeat:
	look at mb86960.c source code.
>Fix:

--- old/sys/dev/ic/mb86960.c	Tue Nov 13 14:14:41 2001
+++ new/sys/dev/ic/mb86960.c	Sat Jun  8 15:43:25 2002
@@ -222,7 +222,7 @@ mb86960_config(sc, media, nmedia, defmed

 #if FE_SINGLE_TRANSMISSION
 	/* Override txb config to allocate minimum. */
-	sc->proto_dlcr6 &= ~FE_D6_TXBSIZ
+	sc->proto_dlcr6 &= ~FE_D6_TXBSIZ;
 	sc->proto_dlcr6 |=  FE_D6_TXBSIZ_2x2KB;
 #endif

@@ -988,11 +988,15 @@ mb86960_rint(sc, rstat)
 		    sc->sc_dev.dv_xname, sbuf);
 #endif
 		ifp->if_ierrors++;
+#if FE_DEBUG >= 2
+		printf("rint: error (%02X)\n", rstat);
+#endif
+		return;
 	}

 	/*
 	 * MB86960 has a flag indicating "receive queue empty."
-	 * We just loop cheking the flag to pull out all received
+	 * We just loop checking the flag to pull out all received
 	 * packets.
 	 *
 	 * We limit the number of iterrations to avoid infinite loop.
@@ -1011,7 +1015,14 @@ mb86960_rint(sc, rstat)
 		 * use inw() to get the status byte.  The significant
 		 * value is returned in lower 8 bits.
 		 */
-		status = (u_char)bus_space_read_2(bst, bsh, FE_BMPR8);
+
+		if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
+			status = bus_space_read_1(bst, bsh, FE_BMPR8);
+			(void) bus_space_read_1(bst, bsh, FE_BMPR8);
+		}
+		else {
+			status = (u_char)bus_space_read_2(bst, bsh, FE_BMPR8);
+		}
 #if FE_DEBUG >= 4
 		log(LOG_INFO, "%s: receive status = %02x\n",
 		    sc->sc_dev.dv_xname, status);
@@ -1035,7 +1046,13 @@ mb86960_rint(sc, rstat)
 		 * It is a sum of a header (14 bytes) and a payload.
 		 * CRC has been stripped off by the 86960.
 		 */
-		len = bus_space_read_2(bst, bsh, FE_BMPR8);
+		if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
+			len = bus_space_read_1(bst, bsh, FE_BMPR8);
+			len |= bus_space_read_1(bst, bsh, FE_BMPR8) << 8;
+		}
+		else {
+			len = (u_char)bus_space_read_2(bst, bsh, FE_BMPR8);
+		}

 		/*
 		 * MB86965 checks the packet length and drop big packet
@@ -1126,8 +1143,6 @@ mb86960_intr(arg)
 	 */
 	tstat = bus_space_read_1(bst, bsh, FE_DLCR0) & FE_TMASK;
 	rstat = bus_space_read_1(bst, bsh, FE_DLCR1) & FE_RMASK;
-	if (tstat == 0 && rstat == 0)
-		return (0);

 	/*
 	 * Loop until there are no more new interrupt conditions.
@@ -1374,8 +1389,13 @@ mb86960_get_packet(sc, len)
 	m->m_len = len;

 	/* Get a packet. */
-	bus_space_read_multi_stream_2(bst, bsh, FE_BMPR8, mtod(m, u_int16_t *),
-			       (len + 1) >> 1);
+	if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
+		bus_space_read_multi_stream_1(bst, bsh, FE_BMPR8, mtod(m, u_int8_t *), len);
+	}
+	else {
+		bus_space_read_multi_stream_2(bst, bsh, FE_BMPR8, mtod(m, u_int16_t *),
+					      (len + 1) >> 1);
+	}

 #if NBPFILTER > 0
 	/*
@@ -1426,11 +1446,21 @@ mb86960_write_mbufs(sc, m)

 #if FE_DELAYED_PADDING
 	/* Do the "delayed padding." */
-	len = sc->txb_padding >> 1;
-	if (len > 0) {
-		while (--len >= 0)
-			bus_space_write_2(bst, bsh, FE_BMPR8, 0);
-		sc->txb_padding = 0;
+	if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
+		len = sc->txb_padding;
+		if (len > 0) {
+			while (--len >= 0)
+				bus_space_write_1(bst, bsh, FE_BMPR8, 0);
+			sc->txb_padding = 0;
+		}
+	}
+	else {
+		len = sc->txb_padding >> 1;
+		if (len > 0) {
+			while (--len >= 0)
+				bus_space_write_2(bst, bsh, FE_BMPR8, 0);
+			sc->txb_padding = 0;
+		}
 	}
 #endif

@@ -1475,8 +1505,16 @@ mb86960_write_mbufs(sc, m)
 	 * packet in the transmission buffer, we can skip the
 	 * padding process.  It may gain performance slightly.  FIXME.
 	 */
-	bus_space_write_2(bst, bsh, FE_BMPR8,
-	    max(totlen, (ETHER_MIN_LEN - ETHER_CRC_LEN)));
+	if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
+		bus_space_write_1(bst, bsh, FE_BMPR8,
+				  max(totlen, (ETHER_MIN_LEN - ETHER_CRC_LEN)));
+		bus_space_write_1(bst, bsh, FE_BMPR8,
+				  max(totlen, (ETHER_MIN_LEN - ETHER_CRC_LEN)) >> 8);
+	}
+	else {
+		bus_space_write_2(bst, bsh, FE_BMPR8,
+				  max(totlen, (ETHER_MIN_LEN - ETHER_CRC_LEN)));
+	}

 	/*
 	 * Update buffer status now.
@@ -1495,9 +1533,9 @@ mb86960_write_mbufs(sc, m)

 	/*
 	 * Transfer the data from mbuf chain to the transmission buffer. 
-	 * MB86960 seems to require that data be transferred as words, and
-	 * only words.  So that we require some extra code to patch
-	 * over odd-length mbufs.
+	 * If the MB86960 is configured in word mode, data needs to be
+	 * transferred as words, and only words.  So that we require some
+	 * extra code to patch over odd-length mbufs.
 	 */
 	wantbyte = 0;
 	for (; m != 0; m = m->m_next) {
@@ -1509,25 +1547,33 @@ mb86960_write_mbufs(sc, m)
 		/* Find the actual data to send. */
 		data = mtod(m, caddr_t);

-		/* Finish the last byte. */
-		if (wantbyte) {
-			bus_space_write_2(bst, bsh, FE_BMPR8,
-			    savebyte | (*data << 8));
-			data++;
-			len--;
-			wantbyte = 0;
-		}
-
-		/* Output contiguous words. */
-		if (len > 1)
-			bus_space_write_multi_stream_2(bst, bsh, FE_BMPR8,
-						(u_int16_t *)data, len >> 1);
-
-		/* Save remaining byte, if there is one. */
-		if (len & 1) {
-			data += len & ~1;
-			savebyte = *data;
-			wantbyte = 1;
+		if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
+			bus_space_write_multi_stream_1(bst, bsh, FE_BMPR8,
+						       (u_int8_t *)data, len);
+			if (len & 1)
+				bus_space_write_1(bst, bsh, FE_BMPR8, 0);
+		}
+		else {
+			/* Finish the last byte. */
+			if (wantbyte) {
+				bus_space_write_2(bst, bsh, FE_BMPR8,
+						  savebyte | (*data << 8));
+				data++;
+				len--;
+				wantbyte = 0;
+			}
+
+			/* Output contiguous words. */
+			if (len > 1)
+				bus_space_write_multi_stream_2(bst, bsh, FE_BMPR8,
+							       (u_int16_t *)data, len >> 1);
+
+			/* Save remaining byte, if there is one. */
+			if (len & 1) {
+				data += len & ~1;
+				savebyte = *data;
+				wantbyte = 1;
+			}
 		}
 	}

@@ -1539,9 +1585,16 @@ mb86960_write_mbufs(sc, m)
 	/*
 	 * Pad the packet to the minimum length if necessary.
 	 */
-	len = ((ETHER_MIN_LEN - ETHER_CRC_LEN) >> 1) - (totlen >> 1);
-	while (--len >= 0)
-		bus_space_write_2(bst, bsh, FE_BMPR8, 0);
+	if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
+		len = (ETHER_MIN_LEN - ETHER_CRC_LEN) - totlen;
+		while (--len >= 0)
+			bus_space_write_1(bst, bsh, FE_BMPR8, 0);
+	}
+	else {
+		len = ((ETHER_MIN_LEN - ETHER_CRC_LEN) >> 1) - (totlen >> 1);
+		while (--len >= 0)
+			bus_space_write_2(bst, bsh, FE_BMPR8, 0);
+	}
 #endif
 }

@@ -1677,7 +1730,7 @@ mb86960_setmode(sc)
 	 *
 	 * Note that the DLC (Data Linc Control unit, i.e. transmitter
 	 * and receiver) must be stopped when feeding the filter, and
-	 * DLC trushes all packets in both transmission and receive
+	 * DLC trashes all packets in both transmission and receive
 	 * buffers when stopped.
 	 *
 	 * ... Are the above sentenses correct?  I have to check the

>Release-Note:
>Audit-Trail:

From: Christian Groessler <cpg@aladdin.de>
To: gnats-bugs@netbsd.org
Cc:  
Subject: Re: kern/17193
Date: 08 Jun 2002 16:54:13 +0200

 Please note that this part of the patch is wrong. I accidently deleted
 too much when I cleaned it up for submission.

 regards,
 chris


 @@ -1126,8 +1143,6 @@ mb86960_intr(arg)
  	 */
  	tstat = bus_space_read_1(bst, bsh, FE_DLCR0) & FE_TMASK;
  	rstat = bus_space_read_1(bst, bsh, FE_DLCR1) & FE_RMASK;
 -	if (tstat == 0 && rstat == 0)
 -		return (0);


  	/*
  	 * Loop until there are no more new interrupt conditions.


From: Christian Groessler <cpg@aladdin.de>
To: gnats-bugs@netbsd.org
Cc: cpg@aladdin.de
Subject: Re: kern/17193
Date: 06 Jul 2002 18:21:46 +0200

 Since I've found another problem in the patch, I include a new version
 which replaces the old one.

 regards,
 chris


 diff -ruN orig/sys/dev/ic/mb86960.c new/sys/dev/ic/mb86960.c
 --- orig/sys/dev/ic/mb86960.c	Tue Nov 13 14:14:41 2001
 +++ new/sys/dev/ic/mb86960.c	Sat Jul  6 18:15:01 2002
 @@ -222,7 +222,7 @@

  #if FE_SINGLE_TRANSMISSION
  	/* Override txb config to allocate minimum. */
 -	sc->proto_dlcr6 &= ~FE_D6_TXBSIZ
 +	sc->proto_dlcr6 &= ~FE_D6_TXBSIZ;
  	sc->proto_dlcr6 |=  FE_D6_TXBSIZ_2x2KB;
  #endif

 @@ -988,11 +988,14 @@
  		    sc->sc_dev.dv_xname, sbuf);
  #endif
  		ifp->if_ierrors++;
 +#if FE_DEBUG >= 2
 +		printf("rint: error (%02X)\n", rstat);
 +#endif
  	}

  	/*
  	 * MB86960 has a flag indicating "receive queue empty."
 -	 * We just loop cheking the flag to pull out all received
 +	 * We just loop checking the flag to pull out all received
  	 * packets.
  	 *
  	 * We limit the number of iterrations to avoid infinite loop.
 @@ -1011,7 +1014,14 @@
  		 * use inw() to get the status byte.  The significant
  		 * value is returned in lower 8 bits.
  		 */
 -		status = (u_char)bus_space_read_2(bst, bsh, FE_BMPR8);
 +
 +		if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
 +			status = bus_space_read_1(bst, bsh, FE_BMPR8);
 +			(void) bus_space_read_1(bst, bsh, FE_BMPR8);
 +		}
 +		else {
 +			status = (u_char)bus_space_read_2(bst, bsh, FE_BMPR8);
 +		}
  #if FE_DEBUG >= 4
  		log(LOG_INFO, "%s: receive status = %02x\n",
  		    sc->sc_dev.dv_xname, status);
 @@ -1035,7 +1045,13 @@
  		 * It is a sum of a header (14 bytes) and a payload.
  		 * CRC has been stripped off by the 86960.
  		 */
 -		len = bus_space_read_2(bst, bsh, FE_BMPR8);
 +		if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
 +			len = bus_space_read_1(bst, bsh, FE_BMPR8);
 +			len |= bus_space_read_1(bst, bsh, FE_BMPR8) << 8;
 +		}
 +		else {
 +			len = (u_char)bus_space_read_2(bst, bsh, FE_BMPR8);
 +		}

  		/*
  		 * MB86965 checks the packet length and drop big packet
 @@ -1374,8 +1390,13 @@
  	m->m_len = len;

  	/* Get a packet. */
 -	bus_space_read_multi_stream_2(bst, bsh, FE_BMPR8, mtod(m, u_int16_t *),
 -			       (len + 1) >> 1);
 +	if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
 +		bus_space_read_multi_stream_1(bst, bsh, FE_BMPR8, mtod(m, u_int8_t *), len);
 +	}
 +	else {
 +		bus_space_read_multi_stream_2(bst, bsh, FE_BMPR8, mtod(m, u_int16_t *),
 +					      (len + 1) >> 1);
 +	}

  #if NBPFILTER > 0
  	/*
 @@ -1426,11 +1447,21 @@

  #if FE_DELAYED_PADDING
  	/* Do the "delayed padding." */
 -	len = sc->txb_padding >> 1;
 -	if (len > 0) {
 -		while (--len >= 0)
 -			bus_space_write_2(bst, bsh, FE_BMPR8, 0);
 -		sc->txb_padding = 0;
 +	if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
 +		len = sc->txb_padding;
 +		if (len > 0) {
 +			while (--len >= 0)
 +				bus_space_write_1(bst, bsh, FE_BMPR8, 0);
 +			sc->txb_padding = 0;
 +		}
 +	}
 +	else {
 +		len = sc->txb_padding >> 1;
 +		if (len > 0) {
 +			while (--len >= 0)
 +				bus_space_write_2(bst, bsh, FE_BMPR8, 0);
 +			sc->txb_padding = 0;
 +		}
  	}
  #endif

 @@ -1475,8 +1506,16 @@
  	 * packet in the transmission buffer, we can skip the
  	 * padding process.  It may gain performance slightly.  FIXME.
  	 */
 -	bus_space_write_2(bst, bsh, FE_BMPR8,
 -	    max(totlen, (ETHER_MIN_LEN - ETHER_CRC_LEN)));
 +	if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
 +		bus_space_write_1(bst, bsh, FE_BMPR8,
 +				  max(totlen, (ETHER_MIN_LEN - ETHER_CRC_LEN)));
 +		bus_space_write_1(bst, bsh, FE_BMPR8,
 +				  max(totlen, (ETHER_MIN_LEN - ETHER_CRC_LEN)) >> 8);
 +	}
 +	else {
 +		bus_space_write_2(bst, bsh, FE_BMPR8,
 +				  max(totlen, (ETHER_MIN_LEN - ETHER_CRC_LEN)));
 +	}

  	/*
  	 * Update buffer status now.
 @@ -1495,9 +1534,9 @@

  	/*
  	 * Transfer the data from mbuf chain to the transmission buffer. 
 -	 * MB86960 seems to require that data be transferred as words, and
 -	 * only words.  So that we require some extra code to patch
 -	 * over odd-length mbufs.
 +	 * If the MB86960 is configured in word mode, data needs to be
 +	 * transferred as words, and only words.  So that we require some
 +	 * extra code to patch over odd-length mbufs.
  	 */
  	wantbyte = 0;
  	for (; m != 0; m = m->m_next) {
 @@ -1509,25 +1548,31 @@
  		/* Find the actual data to send. */
  		data = mtod(m, caddr_t);

 -		/* Finish the last byte. */
 -		if (wantbyte) {
 -			bus_space_write_2(bst, bsh, FE_BMPR8,
 -			    savebyte | (*data << 8));
 -			data++;
 -			len--;
 -			wantbyte = 0;
 -		}
 -
 -		/* Output contiguous words. */
 -		if (len > 1)
 -			bus_space_write_multi_stream_2(bst, bsh, FE_BMPR8,
 -						(u_int16_t *)data, len >> 1);
 -
 -		/* Save remaining byte, if there is one. */
 -		if (len & 1) {
 -			data += len & ~1;
 -			savebyte = *data;
 -			wantbyte = 1;
 +		if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
 +			bus_space_write_multi_stream_1(bst, bsh, FE_BMPR8,
 +						       (u_int8_t *)data, len);
 +		}
 +		else {
 +			/* Finish the last byte. */
 +			if (wantbyte) {
 +				bus_space_write_2(bst, bsh, FE_BMPR8,
 +						  savebyte | (*data << 8));
 +				data++;
 +				len--;
 +				wantbyte = 0;
 +			}
 +
 +			/* Output contiguous words. */
 +			if (len > 1)
 +				bus_space_write_multi_stream_2(bst, bsh, FE_BMPR8,
 +							       (u_int16_t *)data, len >> 1);
 +
 +			/* Save remaining byte, if there is one. */
 +			if (len & 1) {
 +				data += len & ~1;
 +				savebyte = *data;
 +				wantbyte = 1;
 +			}
  		}
  	}

 @@ -1539,9 +1584,16 @@
  	/*
  	 * Pad the packet to the minimum length if necessary.
  	 */
 -	len = ((ETHER_MIN_LEN - ETHER_CRC_LEN) >> 1) - (totlen >> 1);
 -	while (--len >= 0)
 -		bus_space_write_2(bst, bsh, FE_BMPR8, 0);
 +	if ((sc->proto_dlcr6 & FE_D6_SBW) == FE_D6_SBW_BYTE) {
 +		len = (ETHER_MIN_LEN - ETHER_CRC_LEN) - totlen;
 +		while (--len >= 0)
 +			bus_space_write_1(bst, bsh, FE_BMPR8, 0);
 +	}
 +	else {
 +		len = ((ETHER_MIN_LEN - ETHER_CRC_LEN) >> 1) - (totlen >> 1);
 +		while (--len >= 0)
 +			bus_space_write_2(bst, bsh, FE_BMPR8, 0);
 +	}
  #endif
  }

 @@ -1677,7 +1729,7 @@
  	 *
  	 * Note that the DLC (Data Linc Control unit, i.e. transmitter
  	 * and receiver) must be stopped when feeding the filter, and
 -	 * DLC trushes all packets in both transmission and receive
 +	 * DLC trashes all packets in both transmission and receive
  	 * buffers when stopped.
  	 *
  	 * ... Are the above sentenses correct?  I have to check the

State-Changed-From-To: open->feedback 
State-Changed-By: tsutsui 
State-Changed-When: Sat Nov 30 18:52:06 PST 2002 
State-Changed-Why:  
I've committed a similar fix. Please confirm it. 


Responsible-Changed-From-To: kern-bug-people->tsutsui 
Responsible-Changed-By: tsutsui 
Responsible-Changed-When: Sat Nov 30 18:52:06 PST 2002 
Responsible-Changed-Why:  
I'll maintain this driver. 

From: Christian Groessler <cpg@aladdin.de>
To: gnats-bugs@netbsd.org
Cc: cpg@aladdin.de, kern-bug-people@netbsd.org, tsutsui@netbsd.org
Subject: Re: kern/17193
Date: 16 Dec 2002 12:01:54 +0100

 Hi,

 it works.

 regards,
 chris

State-Changed-From-To: feedback->closed 
State-Changed-By: tsutsui 
State-Changed-When: Tue Dec 24 05:18:09 PST 2002 
State-Changed-Why:  
The fix is confirmed by submitter. 
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.