NetBSD Problem Report #172
From gnats Sat Mar 19 09:46:59 1994
Received: from mail.Germany.EU.net (mail.Germany.EU.net [192.76.144.65]) by sun-lamp.cs.berkeley.edu (8.6.7/8.6.6) with ESMTP id JAA04049 for <gnats-bugs@sun-lamp.cs.berkeley.edu>; Sat, 19 Mar 1994 09:46:56 -0800
Message-Id: <m0pi4xr-000GPVC@hcshh.hcs.de>
Date: Sat, 19 Mar 1994 18:37:35 +0100 (MET)
From: hm@hcshh.hcs.de (Hellmuth Michaelis)
Reply-To: hm@hcshh.hcs.de
To: gnats-bugs@sun-lamp.cs.berkeley.edu
Subject: SCSI tape soft error bugreport
>Number: 172
>Category: kern
>Synopsis: soft error while rd/wr to scsi-tape stops backup operation
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: gnats-admin
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sat Mar 19 09:50:01 +0000 1994
>Closed-Date: Thu Mar 20 17:29:43 +0000 1997
>Last-Modified: Thu Mar 20 17:40:38 +0000 1997
>Originator: Hellmuth Michaelis
>Release: NetBSD-current as of March 16th 1994
>Organization:
HCS Hanseatischer Computerservice GmbH
>Environment:
I486 ISA, NetBSD-current, Cipher ST150-S1
System: NetBSD bert.hcs.de 0.9a BERT#2 i386
>Description:
This system has a SCSI-1 QIC Streamer Cipher ST150-S1 connected
to an Adaptec 1542B.
While reading/writing and a soft error occures, this tape drive
generates a check condition status and request sense reads a sense
key of 01h which is a "recoverable error".
No data loss occured by the above described procedure.
This behaviour unhides a bug in the currently used SCSI - driver
code, in the event of a soft error (while writing with tar), the
driver/tar writes the following lines to the console and terminates
operation:
st0: soft error (corrected)
st0: error ignored
tar: only wrote 0 of 10240 bytes to /dev/rst0
The driver announces the correct behaviour (= to ignore this type
of error) but the application program terminates.
>How-To-Repeat:
try to write using tar to a scsi-tape drive which alarms the driver
that a soft error occured.
>Fix:
Modify the scsi tape driver in such a way, that a soft error
condition is really ignored.
This behaviour has been fixed more than a year ago in the original
version of Julian's driver.
Hope this was filled-out right ...
hellmuth
--
Hellmuth Michaelis HCS Hanseatischer Computerservice GmbH Hamburg, Europe
There is a difference between an open mind and a hole in the head
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->feedback
State-Changed-By: perry
State-Changed-When: Wed Mar 19 22:00:07 PST 1997
State-Changed-Why:
Checking with the user (if I can still find him!) to find out
if the problem still exists.
State-Changed-From-To: feedback->closed
State-Changed-By: perry
State-Changed-When: Thu Mar 20 09:29:43 PST 1997
State-Changed-Why:
The original submitter no longer has the equipment needed
to reproduce the problem, and the problem has not been
reproduced successfully by others in soft error conditions.
It is possible that this was fixed incidentally during the last
several years.
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.