NetBSD Problem Report #17354
Received: (qmail 10335 invoked by uid 605); 21 Jun 2002 17:01:28 -0000
Message-Id: <20020621170215.E1E491E787@darkstar.local>
Date: Fri, 21 Jun 2002 19:02:15 +0200 (CEST)
From: jmmv@hispabsd.org
Sender: gnats-bugs-owner@netbsd.org
Reply-To: jmmv@hispabsd.org
To: gnats-bugs@gnats.netbsd.org
Subject: Added network support to sysutils/grub
X-Send-Pr-Version: 3.95
>Number: 17354
>Category: pkg
>Synopsis: Added network support to sysutils/grub
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: tron
>State: closed
>Class: change-request
>Submitter-Id: net
>Arrival-Date: Fri Jun 21 17:02:00 +0000 2002
>Closed-Date: Sat Jul 20 12:44:10 +0000 2002
>Last-Modified: Sat Jul 20 12:44:10 +0000 2002
>Originator: Julio Merino
>Release: NetBSD 1.6B
>Organization:
HispaBSD
>Environment:
System: NetBSD darkstar.local 1.6B NetBSD 1.6B (DARKSTAR) #1: Fri Jun 21 13:22:23 CEST 2002 root@darkstar.local:/var/build/kernel/DARKSTAR i386
Architecture: i386
Machine: i386
>Description:
The GRUB bootloader has support to boot kernels through a network,
as explained in the NetBSD's Netboot HOWTO. There is a problem though;
the package itself does not support passing options to GRUB to enable
network cards at compilation time.
I've added several GRUB_USE_name, where 'name' is the name of the
network card, to sysutils/grub/Makefile.
>How-To-Repeat:
>Fix:
First of all, here is PLIST.diskless, needed when any network card
is enabled (two more binaries are installed):
---- start PLIST.diskless -----
@comment $NetBSD$
share/grub/${MACHINE_ARCH}-/nbgrub
share/grub/${MACHINE_ARCH}-/pxegrub
---- end PLIST.diskless -----
And here is the Makefile patch:
---- start patch.diff -----
Index: Makefile
===================================================================
RCS file: /cvsroot/pkgsrc/sysutils/grub/Makefile,v
retrieving revision 1.7
diff -u -u -r1.7 Makefile
--- Makefile 2002/06/08 18:28:06 1.7
+++ Makefile 2002/06/21 16:56:52
@@ -15,6 +15,204 @@
USE_GMAKE= YES
USE_BUILDLINK_ONLY= YES
+# See note at the end
+PLIST_SRC=
+
+# Network driver: 3Com509
+.if defined(GRUB_USE_3C509)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-3c509
+.endif
+
+# Network driver: 3Com529
+.if defined(GRUB_USE_3C529)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-3c529
+.endif
+
+# Network driver: 3Com595
+.if defined(GRUB_USE_3C595)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-3c595
+.endif
+
+# Network driver: 3Com90x
+.if defined(GRUB_USE_3C90X)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-3c90x
+.endif
+
+# Network driver: 3Com507
+.if defined(GRUB_USE_3C507)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-3c507
+.endif
+
+# Network driver: 3Com503
+.if defined(GRUB_USE_3C503)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-3c503
+.endif
+
+# Network driver: CS89x0
+.if defined(GRUB_USE_CS89X0)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-cs89x0
+.endif
+
+# Network driver: Davicom
+.if defined(GRUB_USE_DAVICOM)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-davicom
+.endif
+
+# Network driver: DEPCA and EtherWORKS
+.if defined(GRUB_USE_DEPCA)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-depca
+.endif
+
+# Network driver: Etherexpress Pro/10
+.if defined(GRUB_USE_EEPRO)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-eepro
+.endif
+
+# Network driver: Etherexpress Pro/100
+.if defined(GRUB_USE_EEPRO100)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-eepro100
+.endif
+
+# Network driver: SMC 83c170 EPIC/100
+.if defined(GRUB_USE_EPIC100)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-epic100
+.endif
+
+# Network driver: EXOS205
+.if defined(GRUB_USE_EXOS205)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-exos205
+.endif
+
+# Network driver: Racal-Interlan NI5210
+.if defined(GRUB_USE_NI5210)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-ni5210
+.endif
+
+# Network driver: Racal-Interlan NI6510
+.if defined(GRUB_USE_NI6510)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-ni6510
+.endif
+
+# Network driver: Racal-Interlan NI5010
+.if defined(GRUB_USE_NI5010)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-ni5010
+.endif
+
+# Network driver: Lance PCI PCNet/32
+.if defined(GRUB_USE_LANCE)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-lance
+.endif
+
+# Network driver: Novell NE2100
+.if defined(GRUB_USE_NE2100)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-ne2100
+.endif
+
+# Network driver: NatSemi DP8381x
+.if defined(GRUB_USE_NATSEMI)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-natsemi
+.endif
+
+# Network driver: NE1000/2000 ISA
+.if defined(GRUB_USE_NE)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-ne
+.endif
+
+# Network driver: NE2000 PCI
+.if defined(GRUB_USE_NS8390)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-ns8390
+.endif
+
+# Network driver: WD8003/8013, SMC8216/8416
+.if defined(GRUB_USE_WD)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-wd
+.endif
+
+# Network driver: Old Tulip
+.if defined(GRUB_USE_OTULIP)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-otulip
+.endif
+
+# Network driver: Realtek 8139
+.if defined(GRUB_USE_RTL8139)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-rtl8139
+.endif
+
+# Network driver: SIS 900 and SIS 7016
+.if defined(GRUB_USE_SIS900)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-sis900
+.endif
+
+# Network driver: Schneider and Koch G16
+.if defined(GRUB_USE_SK_G16)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-sk-g16
+.endif
+
+# Network driver: SMC9000
+.if defined(GRUB_USE_SMC9000)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-smc9000
+.endif
+
+# Network driver: Tiara
+.if defined(GRUB_USE_TIARA)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-tiara
+.endif
+
+# Network driver: Tulip
+.if defined(GRUB_USE_TULIP)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-tulip
+.endif
+
+# Network driver: Rhine-I/II
+.if defined(GRUB_USE_VIA_RHINE)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-via-rhine
+.endif
+
+# Network driver: Winbond W89c840, Compex RL100-ATX
+.if defined(GRUB_USE_W89C840)
+GRUB_USE_DISKLESS= yes
+CONFIGURE_ARGS+= --enable-w89c840
+.endif
+
+.if defined(GRUB_USE_DISKLESS)
+CONFIGURE_ARGS+= --enable-diskless
+PLIST_SRC+= PLIST.diskless
+.endif
+
+# Note: we add PLIST after PLIST.diskless (if it has been included)
+# so directories can be removed properly.
+PLIST_SRC+= PLIST
+
.include "../../devel/binutils/buildlink.mk"
.include "../../devel/ncurses/buildlink.mk"
.include "../../mk/bsd.pkg.mk"
---- end patch.diff -----
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->feedback
State-Changed-By: tron
State-Changed-When: Fri Jul 19 07:05:03 PDT 2002
State-Changed-Why:
We try to avoid to make packages overconfigurable to prevent different
behaviour of two packages with the same name. Is there a reason why we
should not enable diskless support for all network cards by default?
Responsible-Changed-From-To: pkg-manager->tron
Responsible-Changed-By: tron
Responsible-Changed-When: Fri Jul 19 07:05:03 PDT 2002
Responsible-Changed-Why:
I'll handle this PR.
From: Julio Merino <jmmv@hispabsd.org>
To: "tron@netbsd.org" <tron@netbsd.org>
Cc: NetBSD GNATS <gnats-bugs@gnats.netbsd.org>
Subject: Re: pkg/17354
Date: Fri, 19 Jul 2002 16:17:50 +0200
On 19 Jul 2002 14:06:54 -0000
"tron@netbsd.org" <tron@netbsd.org> wrote:
> We try to avoid to make packages overconfigurable to prevent different
> behaviour of two packages with the same name.
I thought so... The other solution is to make independant packages for
each network card, grub-*, but this would mean lots of packages :p
> Is there a reason why we
> should not enable diskless support for all network cards by default?
Well, I think it would cause much overhead and big big binaries. Haven't
tried it, though...
Regards
--
HispaBSD admin - http://www.hispabsd.org
Julio Merino <jmmv@hispabsd.org>
From: Matthias Scheler <tron@zhadum.de>
To: Julio Merino <jmmv@hispabsd.org>
Cc: NetBSD GNATS <gnats-bugs@gnats.netbsd.org>
Subject: Re: pkg/17354
Date: Fri, 19 Jul 2002 16:22:12 +0200
On Fri, Jul 19, 2002 at 04:17:50PM +0200, Julio Merino wrote:
> > We try to avoid to make packages overconfigurable to prevent different
> > behaviour of two packages with the same name.
>
> I thought so... The other solution is to make independant packages for
> each network card, grub-*, but this would mean lots of packages :p
>
That sounds like an overkill.
> > should not enable diskless support for all network cards by default?
>
> Well, I think it would cause much overhead and big big binaries.
I don't think it will be more than a few 100KB extra. I only wonder
if the binaries can get so big that they won't work because of
some BIOS restriction.
Kind regards
--
Matthias Scheler http://scheler.de/~matthias/
State-Changed-From-To: feedback->analyzed
State-Changed-By: tron
State-Changed-When: Sat Jul 20 04:39:27 PDT 2002
State-Changed-Why:
I've just found the relevant part in the "grub" documentation:
Caution: You should enable them as you need. Don't enable any
unnecessary driver, because GRUB might crash if you include too many
drivers at the same time.
It seems that we definitely need to make the package customizable.
State-Changed-From-To: analyzed->closed
State-Changed-By: tron
State-Changed-When: Sat Jul 20 05:43:00 PDT 2002
State-Changed-Why:
I've added optional netboot support to the "grub" package. The netboot
support is controlled with the package variable "GRUB_NETWORK_CARDS"
and "GRUB_SCAN_ARGS". Thanks for the suggestion.
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.