NetBSD Problem Report #19856


>Number:         19856
>Category:       kern
>Synopsis:       Add support for Epson Perfection 2400 USB scanner
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    kern-bug-people
>State:          closed
>Class:          change-request
>Submitter-Id:   net
>Arrival-Date:   Wed Jan 15 13:09:00 +0000 2003
>Closed-Date:    Thu Sep 08 07:01:34 +0000 2005
>Last-Modified:  Thu Sep 08 07:01:34 +0000 2005
>Originator:     Rob Quinn
>Release:        current as of 15 Jan 2003
>Organization:
>Environment:
NetBSD strike.XXX 1.6L NetBSD 1.6L (STRIKE) #83: Wed Jan 15 07:27:07 EST 2003     rquinn@strike.XXX:/usr/obj/STRIKE i386

>Description:
Similar to kern/14170 and kern/19767, these changes (usually) let SANE use my Epson Perfection 2400 USB scanner:

%cd sys/dev/usb/
%cvs diff usbdevs
Index: usbdevs
===================================================================
RCS file: /cvsroot/src/sys/dev/usb/usbdevs,v
retrieving revision 1.291
diff -c -r1.291 usbdevs
*** usbdevs     2003/01/13 17:25:20     1.291
--- usbdevs     2003/01/15 12:57:13
***************
*** 660,665 ****
--- 660,666 ----
  product EPSON GT9700F         0x0112  GT-9700F scanner
  product EPSON 1260            0x011d  Perfection 1260 scanner
  product EPSON 1660            0x011e  Perfection 1660 scanner
+ product EPSON 2400            0x011b  Perfection 2400 scanner

  /* e-TEK Labs products */
  product ETEK 1COM             0x8007  Serial port





%cvs diff uscanner.c 
Index: uscanner.c
===================================================================
RCS file: /cvsroot/src/sys/dev/usb/uscanner.c,v
retrieving revision 1.37
diff -c -r1.37 uscanner.c
*** uscanner.c  2003/01/13 21:51:30     1.37
--- uscanner.c  2003/01/15 12:57:25
***************
*** 185,190 ****
--- 185,191 ----
   {{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_1660 }, 0 },
   {{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_640U }, 0 },
   {{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_1650 }, 0 },
+  {{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_2400 }, 0 },
   {{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_GT9700F }, USC_KEEP_OPEN },

#dmesg | grep uscan
uscanner0 at uhub0 port 1
uscanner0: EPSON EPSON Scanner, rev 2.00/1.00, addr 2

>How-To-Repeat:
Without the changes:

ugen0 at uhub0 port 1
ugen0: EPSON EPSON Scanner, rev 2.00/1.00, addr 2

With the changes I still saw this several times when I connected the scanner:

uhub0: device problem, disabling port 1

 Unplugging/replugging the USB cable a few times enabled it:

uscanner0 at uhub0 port 1
uscanner0: EPSON EPSON Scanner, rev 2.00/1.00, addr 2

 SANE and xscanimage could use the device in 8 bit mode once I commented out the
current entries in /usr/pkg/etc/sane.d/epson.conf and put in "usb /dev/uscanner0".
16 bit mode just returns solid black images, but this is my first time using SANE so it
could be a problem on my end.


%scanimage -L
[epson] Requesting extended status
[epson] No error
[epson] Checking for ADF: (00)
[epson] Checking for TPU: (80)
[epson] Device name = GT-9300
device `epson:/dev/uscanner0' is a Epson GT-9300 flatbed scanner

>Fix:

>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: augustss 
State-Changed-When: Wed Jan 15 05:37:50 PST 2003 
State-Changed-Why:  
Patch applied. 
Responsible-Changed-From-To: kern-bug-people->tron
Responsible-Changed-By: tron@netbsd.org
Responsible-Changed-When: Thu, 08 Sep 2005 06:58:27 +0000
Responsible-Changed-Why:
I'll investigate this.


State-Changed-From-To: closed->open
State-Changed-By: tron@netbsd.org
State-Changed-When: Thu, 08 Sep 2005 06:58:27 +0000
State-Changed-Why:
Making the suggested ioctl() change might make auto detection work.


Responsible-Changed-From-To: tron->kern-bug-people
Responsible-Changed-By: tron@netbsd.org
Responsible-Changed-When: Thu, 08 Sep 2005 07:01:34 +0000
Responsible-Changed-Why:
Opps, I reopened the wrong PR.


State-Changed-From-To: open->closed
State-Changed-By: tron@netbsd.org
State-Changed-When: Thu, 08 Sep 2005 07:01:34 +0000
State-Changed-Why:
Opps, I reopened the wrong PR.


>Unformatted:



 >Received: (qmail 27163 invoked by uid 605); 15 Jan 2003 13:08:50 -0000
 Message-Id: <20030115130844.3D89611124@narn.netbsd.org>
 Date: Wed, 15 Jan 2003 05:08:44 -0800 (PST)
 From: rquinn@sec.sprint.net
 Sender: gnats-bugs-owner@netbsd.org
 Reply-To: rquinn@sec.sprint.net
 To: gnats-bugs@gnats.netbsd.org
 Subject: Add support for Epson Perfection 2400 USB scanner
 X-Send-Pr-Version: www-1.0

 I don't think the ioctl() is necessary if you configure your scanner
 like this:

 [usb] 0x04b8 0x011b
 device /dev/uscanner0

 However having autoconfiguration would be nice. I'll see if the ioctl()
 makes autoconfiguration work on my Epson Perfection 1200 and commit
 it if it works.

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.