NetBSD Problem Report #22423

Received: (qmail 20819 invoked by uid 605); 10 Aug 2003 03:11:10 -0000
Message-Id: <20030810031108.75B2811152@narn.netbsd.org>
Date: Sun, 10 Aug 2003 03:11:08 +0000 (UTC)
From: vugdeox@freeshell.org
Sender: gnats-bugs-owner@NetBSD.org
Reply-To: vugdeox@freeshell.org
To: gnats-bugs@gnats.NetBSD.org
Subject: cannot switch out of X -> usl_detachtimeout \n usl_detachack: not detaching
X-Send-Pr-Version: www-1.0

>Number:         22423
>Category:       kern
>Synopsis:       cannot switch out of X -> usl_detachtimeout \n usl_detachack: not detaching
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Aug 10 03:12:00 +0000 2003
>Closed-Date:    Sun Jun 26 07:26:01 +0000 2016
>Last-Modified:  Sun Jun 26 07:26:01 +0000 2016
>Originator:     Nate Hill
>Release:        1.6U
>Organization:
>Environment:
NetBSD cryogen 1.6U NetBSD 1.6U (CRYOGEN) #9: Mon Jul 28 17:18:00 CDT 2003  vugdeox@cryogen:/sys/arch/i386/compile/CRYOGEN i386
>Description:
This only occurs when using acpi (I seem to remember it happening once on a generic kernel after a reboot from an acpi kernel) and it happens randomly. Ocassionally I can't switch to the other four consoles configured on this box, once "it" starts I usually have to restart X to get around - it also goes away for unknown reasons. Basically, X "freezes" like normal for about a second and then it refreshes in a strange way (cool effects, sorta). Anyways, I looked in the source to find the two messages that I get on the console and I have no idea what the problem is.

usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching

(each pair is from one failed attempt to switch)

dmesg:
---

NetBSD 1.6U (CRYOGEN) #9: Mon Jul 28 17:18:00 CDT 2003
        vugdeox@cryogen:/sys/arch/i386/compile/CRYOGEN
total memory = 255 MB
avail memory = 234 MB
using 3297 buffers containing 13188 KB of memory
BIOS32 rev. 0 found at 0xf1200
PCI BIOS rev. 2.1 found at 0xf1400
PCI IRQ Routing Table rev. 1.0 found at 0xf1970, size 144 bytes (7 entries)
PCI Interrupt Router at 000:31:0 (vendor 0x8086 product 0x122e)
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium 4 (686-class), 1494.57 MHz, id 0xf12
cpu0: features 3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 3febfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features 3febfbff<FXSR,SSE,SSE2,SS,HTT,TM>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 256 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 8 page colors
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20030228
acpi0: X/RSDT: OemId <ASUS  ,P4B_LX  ,42302e31>, AslId <MSFT,31313031>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 [System Board] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
lpt0 at acpi0 (PNP0400)
lpt0: io 0x278-0x27f irq 5
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
configuring bus 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1a30 (rev. 0x03)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x1a31 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x002d (rev. 0x15)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x12)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
rtk0 at pci2 dev 13 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at apic 2 int 21 (irq 9)
rtk0: Ethernet address 00:e0:18:50:8a:76
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci2 dev 14 function 0: vendor 0x104c product 0x8020 (rev. 0x00)
fwohci0: interrupting at apic 2 int 18 (irq 3)
fwohci0: OHCI 1.0, 08:00:46:03:00:fd:e4:3d, 400Mb/s, 2048 max_rec, 4 ir_ctx, 8 it_ctx
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2440 (rev. 0x12)
pciide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (ICH2) (rev. 0x12)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 4D060H3>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 58627 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 120069936 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at pciide0 channel 0 drive 1: <IBM-DTTA-350640>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 6197 MB, 12592 cyl, 16 head, 63 sec, 512 bytes/sect x 12692736 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <SONY    CD-RW  CRX175E, , 1.1a> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd1 at atapibus0 drive 1: <Pioneer DVD-ROM ATAPIModel DVD-117  010, , E1.04> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
uhci0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2442 (rev. 0x12)
uhci0: interrupting at apic 2 int 19 (irq 7)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 31 function 4: vendor 0x8086 product 0x2444 (rev. 0x12)
uhci1: interrupting at apic 2 int 23 (irq 9)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio
auich0: interrupting at apic 2 int 17 (irq 10)
auich0: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
auich0: variable rate audio
audio0 at auich0: full duplex, mmap, independent
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
ioapic0: enabling
auich0: measured ac97 link rate at 52645 Hz
fw0 at fwohci0: 08:00:46:03:00:fd:e4:3d:0a:02:ff:ff:f0:01:00:00
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: A4Tech USB Optical Mouse, rev 2.00/1.00, addr 2, iclass 3/1
ums0 at uhidev0: 7 buttons and Z dir.
wsmouse0 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching
usl_detachtimeout
usl_detachack: not detaching

>How-To-Repeat:

>Fix:

>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Sun, 26 Jun 2016 07:26:01 +0000
State-Changed-Why:
Same as 44712, which contains some analysis.


>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.