NetBSD Problem Report #25035
Received: (qmail 22868 invoked by uid 605); 3 Apr 2004 08:09:59 -0000
Message-Id: <20040403080955.079731115C@narn.netbsd.org>
Date: Sat, 3 Apr 2004 08:09:55 +0000 (UTC)
From: pyrasis@mogua.com
Sender: gnats-bugs-owner@NetBSD.org
Reply-To: pyrasis@mogua.com
To: gnats-bugs@gnats.NetBSD.org
Subject: Intel 82801EB Serial ATA Controller and Seagate ST3120026AS disk problem
X-Send-Pr-Version: www-1.0
>Number: 25035
>Category: port-i386
>Synopsis: Intel 82801EB Serial ATA Controller and Seagate ST3120026AS disk problem
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-i386-maintainer
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sat Apr 03 08:10:00 +0000 2004
>Closed-Date: Mon May 25 19:22:36 +0000 2020
>Last-Modified: Mon May 25 19:22:36 +0000 2020
>Originator: Lee Jae-Hong
>Release: 2.0B
>Organization:
>Environment:
NetBSD pyrasis 2.0B NetBSD 2.0B (PYRASIS) #0: Fri Apr 2 02:12:05 KST 2004 root@pyrasis:/usr/src/sys/arch/i386/compile/PYRASIS i386
>Description:
I have Seagate "ST3120026AS" S-ATA drive.
and use Intel 82801EB Serial ATA Controller.
sys/dev/ata/wd.c
static const struct wd_quirk {
const char *wdq_match; /* inquiry pattern to match */
int wdq_quirks; /* drive quirks */
} wd_quirk_table[] = {
/*
* Some Seagate S-ATA drives have a PHY which can get confused
* with the way data is packetized by some S-ATA controllers.
*
* The work-around is to split in two any write transfer whose
* sector count % 15 == 1 (assuming 512 byte sectors).
*
* XXX This is an incomplete list. There are at least a couple
* XXX more model numbers. If you have trouble with such transfers
* XXX (8K is the most common) on Seagate S-ATA drives, please
* XXX notify thorpej@NetBSD.org.
*/
{ "ST3120023AS",
WD_QUIRK_SPLIT_MOD15_WRITE },
{ "ST380023AS",
WD_QUIRK_SPLIT_MOD15_WRITE },
{ NULL,
0 }
};
I added "ST3120026AS"
{ "ST3120026AS",
WD_QUIRK_SPLIT_MOD15_WRITE },
but, boot failure,
NetBSD 2.0B (PYRASIS) #0: Fri Apr 2 02:12:05 KST 2004
root@pyrasis:/usr/src/sys/arch/i386/compile/PYRASIS
total memory = 1015 MB
avail memory = 988 MB
BIOS32 rev. 0 found at 0xfb4c0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 2405.58 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82865 Host (rev. 0x02)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture at 0xe8000000, size 0x8000000
vga1 at pci0 dev 2 function 0: Intel 82865G Integrated Graphics Device (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller #0 (rev. 0x02)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller #1 (rev. 0x02)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller #2 (rev. 0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801EB/ER USB UHCI Controller #3 (rev. 0x02)
uhci3: interrupting at irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
Intel 82801EB/ER USB EHCI Controller (USB serial bus, interface 0x20, revision 0x02) at pci0 dev 29 function 7 not configured
ppb0 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0xc2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
rtk0 at pci1 dev 6 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:30:1b:af:2c:75
OUI 0x000000 model 0x0000 rev 0 at rtk0 phy 7 not configured
eap0 at pci1 dev 7 function 0: Ensoniq CT5880 CT5880-C (rev. 0x02)
eap0: interrupting at irq 5
eap0: ac97: SigmaTel STAC9708 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
eap0: ac97: ext id 80<SDAC>
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus, interface 0x10, revision 0x80) at pci1 dev 8 function 0 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801EB Serial ATA Controller (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using irq 11 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
Intel 82801EB/ER SMBus Controller (SMBus serial bus, revision 0x02) at pci0
dev 31 function 3 not configured
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
!!!! STOP KERNEL HERE !!!!
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
From: Martti Kuparinen <martti.kuparinen@iki.fi>
To: pyrasis@mogua.com
Cc: gnats-bugs@gnats.NetBSD.org
Subject: Re: port-i386/25035: Intel 82801EB Serial ATA Controller and Seagate
ST3120026AS disk problem
Date: Sat, 03 Apr 2004 14:05:30 +0000
> I have Seagate "ST3120026AS" S-ATA drive.
> and use Intel 82801EB Serial ATA Controller.
I have EXACTLY the same setup (Dell Dimension 8300, BIOS A05) and I have
no problems at all (my kernel is GENERIC + ACPI).
NetBSD 2.0B (DELL) #0: Sat Apr 3 13:38:21 UTC 2004
martti@e18:/usr/src/sys/arch/i386/compile/DELL
total memory = 1023 MB
avail memory = 994 MB
...
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
...
wd0 at atabus1 drive 0: <ST3120026AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232514 cyl, 16 head, 63 sec, 512 bytes/sect x 234375000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using
DMA data transfers)
From: Lee Jae-Hong <pyrasis@mogua.com>
To: gnats-bugs@gnats.NetBSD.org
Cc:
Subject: Re: port-i386/25035: Intel 82801EB Serial ATA Controller and Seagate ST3120026AS disk problem
Date: Sun, 4 Apr 2004 20:03:41 +0900
> Thank you very much for your problem report.
> It has the internal identification `port-i386/25035'.
> The individual assigned to look at your
> report is: port-i386-maintainer.
>
> >Category: port-i386
> >Responsible: port-i386-maintainer
> >Synopsis: Intel 82801EB Serial ATA Controller and Seagate
> > ST3120026AS disk problem Arrival-Date: Sat Apr 03 08:10:00 UTC 2004
My "ST3120026AS" is second drive.
Intel S-ATA Controller onboarded in i865G
IDE Channel 0 Master [Installed NetBSD hard disk, ATA]
IDE Channel 0 Slave  [None]
IDE Channel 1 Master [CDROM]
IDE Channel 1 Slave  [None]
IDE Channel 2 Master [Seagate ST3120026AS S-ATA]
IDE Channel 3 Master [None]
From: Lee Jae-Hong <pyrasis@mogua.com>
To: Martti Kuparinen <martti.kuparinen@iki.fi>
Cc: gnats-bugs@gnats.NetBSD.org
Subject: Re: port-i386/25035: Intel 82801EB Serial ATA Controller and Seagate ST3120026AS disk problem
Date: Sat, 3 Apr 2004 21:11:55 +0900
On 2004³â April 3ÀÏ Saturday pm 11:05, Martti Kuparinen wrote:
> > I have Seagate "ST3120026AS" S-ATA drive.
> > and use Intel 82801EB Serial ATA Controller.
>
> I have EXACTLY the same setup (Dell Dimension 8300, BIOS A05) and I have
> no problems at all (my kernel is GENERIC + ACPI).
>
> NetBSD 2.0B (DELL) #0: Sat Apr 3 13:38:21 UTC 2004
> martti@e18:/usr/src/sys/arch/i386/compile/DELL
> total memory = 1023 MB
> avail memory = 994 MB
> ...
> piixide0 at pci0 dev 31 function 1
> piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
> ...
> wd0 at atabus1 drive 0: <ST3120026AS>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 111 GB, 232514 cyl, 16 head, 63 sec, 512 bytes/sect x 234375000
> sectors wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using
> DMA data transfers)
My "ST3120026AS" is second drive.
Intel S-ATA Controller onboarded in i865G
From: Lee Jae-Hong <pyrasis@mogua.com>
To: Martti Kuparinen <martti.kuparinen@iki.fi>
Cc: gnats-bugs@gnats.NetBSD.org
Subject: Re: port-i386/25035: Intel 82801EB Serial ATA Controller and Seagate ST3120026AS disk problem
Date: Sun, 4 Apr 2004 14:12:35 +0900
On 2004³â April 3ÀÏ Saturday pm 11:05, Martti Kuparinen wrote:
> > I have Seagate "ST3120026AS" S-ATA drive.
> > and use Intel 82801EB Serial ATA Controller.
>
> I have EXACTLY the same setup (Dell Dimension 8300, BIOS A05) and I have
> no problems at all (my kernel is GENERIC + ACPI).
>
> NetBSD 2.0B (DELL) #0: Sat Apr 3 13:38:21 UTC 2004
> martti@e18:/usr/src/sys/arch/i386/compile/DELL
> total memory = 1023 MB
> avail memory = 994 MB
> ...
> piixide0 at pci0 dev 31 function 1
> piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
> ...
> wd0 at atabus1 drive 0: <ST3120026AS>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 111 GB, 232514 cyl, 16 head, 63 sec, 512 bytes/sect x 234375000
> sectors wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using
> DMA data transfers)
My "ST3120026AS" is second drive.
Intel S-ATA Controller onboarded in i865G
IDE Channel 0 Master [Installed NetBSD hard disk, ATA]
IDE Channel 0 Slave [None]
IDE Channel 1 Master [CDROM]
IDE Channel 1 Slave [None]
IDE Channel 2 Master [Seagate ST3120026AS S-ATA]
IDE Channel 3 Master [None]
State-Changed-From-To: open->closed
State-Changed-By: jdolecek@NetBSD.org
State-Changed-When: Mon, 25 May 2020 19:22:36 +0000
State-Changed-Why:
Hardware no longer relevant.
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.46 2020/01/03 16:35:01 leot Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2020
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.