NetBSD Problem Report #26500

Received: (qmail 6871 invoked by uid 605); 1 Aug 2004 05:11:39 -0000
Message-Id: <20040801024729.BE4C911152@narn.netbsd.org>
Date: Sun,  1 Aug 2004 02:47:29 +0000 (UTC)
From: cgd@netbsd.org
Sender: gnats-bugs-owner@NetBSD.org
Reply-To: cgd@netbsd.org
To: gnats-bugs@gnats.NetBSD.org
Subject: 2.0-branch: AHA2940UW croaks w/ NEC CD-ROM drive
X-Send-Pr-Version: www-1.0

>Number:         26500
>Category:       kern
>Synopsis:       2.0-branch: AHA2940UW croaks w/ NEC CD-ROM drive
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Aug 01 05:12:00 +0000 2004
>Closed-Date:    
>Last-Modified:  Sun Feb 26 06:28:34 +0000 2012
>Originator:     Chris Demetriou
>Release:        2.0 branch, autobuild snapshot netbsd-2-0/200407270000
>Organization:
Perpetual Whiners Society
>Environment:
ftp://releng.netbsd.org/pub/NetBSD-daily/netbsd-2-0/200407270000/i386/installation/floppy/boot-com1.fs
and boot-com2.fs

on a Dell Optiplex GX Pro (PPro @ 200MHz)
>Description:
a current-ish kernel from the 2.0 branch croaks with an AHA2940UW
with an NEC CD-ROM drive attached.

(there was another problem reported about 2940UW that is still
open, 22495, but it's not clear to me that this is the same
issue.)


dmesg output from a 1.6.x-branch kernel (also from autobuild) is:

NetBSD 1.6.2_STABLE (INSTALL) #0: Mon Jul 12 19:48:40 UTC 2004
    cyber@b5.urc.uninett.no:/usr/users/autobuild/autobuild/netbsd-1-6/i386/OBJ/usr/users/autobuild/autobuild/netbsd-1-6/src/sys/arch/i386/compile/INSTALL
cpu0: Intel Pentium Pro (686-class), 199.44 MHz
cpu0: I-cache 8 KB 32b/line 4-way, D-cache 8 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 4-way
cpu0: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features fbff<PGE,MCA,CMOV>
total memory = 65148 KB
avail memory = 54876 KB
using 839 buffers containing 3356 KB of memory
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 13 function 0
pcib0: vendor 0x8086 product 0x7000 (rev. 0x01)
pciide0 at pci0 dev 13 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 13 function 2: vendor 0x8086 product 0x7020 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 14 function 0: vendor 0x1011 product 0x0021 (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ex0 at pci1 dev 8 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at irq 11
ex0: MAC address 00:c0:4f:b6:ec:30
nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 16 function 0: vendor 0x102b product 0x0519 (rev. 0x01)
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ahc1 at pci0 dev 17 function 0
ahc1: interrupting at irq 11
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ffe5 netmask ffe5 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST34371W, 0484> SCSI2 0/direct fixed
sd0: 4095 MB, 5172 cyl, 10 head, 162 sec, 512 bytes/sect x 8388314 sectors
sd0: sync (100.0ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 5 lun 0: <NEC, CD-ROM DRIVE:462, 1.14> SCSI2 5/cdrom removable
cd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers
st0 at scsibus0 target 6 lun 0: <ARCHIVE, Python 00095-001, 5AB> SCSI2 1/sequential removable
st0: drive empty
st0: sync (128.0ns offset 15), 8-bit (7.812MB/s) transfers
md0: internal 2048 KB image area
boot device: sd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console


Boot output from the 2.0-branch kernel (using serial console) is:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0_BETA (INSTALL) #0: Fri Jul 30 03:11:32 UTC 2004
        autobuild@tgm.netbsd.org:/autobuild/netbsd-2-0/i386/OBJ/autobuild/netbsd-2-0/src/sys/arch/i386/compile/INSTALL
total memory = 65152 KB
avail memory = 54856 KB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium Pro (686-class), 199.45 MHz, id 0x619
cpu0: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features fbff<PGE,MCA,CMOV>
cpu0: I-cache 8 KB 32B/line 4-way, D-cache 8 KB 32B/line 2-way
cpu0: L2 cache 256 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 13 function 0
pcib0: vendor 0x8086 product 0x7000 (rev. 0x01)
piixide0 at pci0 dev 13 function 1
piixide0: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 13 function 2: vendor 0x8086 product 0x7020 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 14 function 0: vendor 0x1011 product 0x0021 (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ex0 at pci1 dev 8 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at irq 11
ex0: MAC address 00:c0:4f:b6:ec:30
nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 16 function 0: vendor 0x102b product 0x0519 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
ahc1 at pci0 dev 17 function 0: Adaptec 2940 Ultra SCSI adapter
ahc1: interrupting at irq 11
ahc1: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
md0: internal 5000 KB image area
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST34371W, 0484> disk fixed
sd0: 4095 MB, 5172 cyl, 10 head, 162 sec, 512 bytes/sect x 8388314 sectors
sd0: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
ahc1:SCB 0xe - timed out
>How-To-Repeat:
boot 2.0-branch on one of my PCs?

I can help test kernels and/or provide debug info, if needed.
>Fix:
Unknown.


>Release-Note:
>Audit-Trail:
>Unformatted:
 >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
 ahc1: Dumping Card State in Data-in phase, at SEQADDR 0x7d
 Card was paused
 ACCUM = 0xf4, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0x3
 HCNT = 0x18 SCBPTR = 0x0
 SCSISIGI[0x44] ERROR[0x0] SCSIBUSL[0x20] LASTPHASE[0x40] 
 SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0x0] SEQCTL[0x10] 
 SEQ_FLAGS[0x20] SSTAT0[0x0] SSTAT1[0x3] SSTAT2[0x0] 
 SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0x80] 
 DFCNTRL[0x78] DFSTATUS[0x0] 
 STACK: 0x0 0x16c 0x19c 0x6f
 SCB count = 16
 Kernel NEXTQSCB = 15
 Card NEXTQSCB = 15
 QINFIFO entries: 
 Waiting Queue entries: 
 Disconnected Queue entries: 
 QOUTFIFO entries: 
 Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Sequencer SCB Info: 
   0 SCB_CONTROL[0x40] SCB_SCSIID[0x57] 
 SCB_LUN[0x0] SCB_TAG[0xe] 
   1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
 Pending list: 
  14 SCB_CONTROL[0x40] SCB_SCSIID[0x57] 
 SCB_LUN[0x0] 
 Kernel Free SCB list: 13 12 11 10 9 8 7 6 5 4 3 2 1 0 
 Untagged Q(5): 14 

 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
 sg[0] - Addr 0x12cdec8 : Length 36
 ahc1:BDR message in message buffer
 ahc1:SCB 0xe - timed out
 >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
 ahc1: Dumping Card State in Data-in phase, at SEQADDR 0x7d
 Card was paused
 ACCUM = 0xf4, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0x3
 HCNT = 0x18 SCBPTR = 0x0
 SCSISIGI[0x54] ERROR[0x0] SCSIBUSL[0x20] LASTPHASE[0x40] 
 SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0x0] SEQCTL[0x10] 
 SEQ_FLAGS[0x20] SSTAT0[0x0] SSTAT1[0x3] SSTAT2[0x0] 
 SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0x80] 
 DFCNTRL[0x78] DFSTATUS[0x0] 
 STACK: 0x0 0x16c 0x19c 0x6f
 SCB count = 16
 Kernel NEXTQSCB = 15
 Card NEXTQSCB = 15
 QINFIFO entries: 
 Waiting Queue entries: 
 Disconnected Queue entries: 
 QOUTFIFO entries: 
 Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Sequencer SCB Info: 
   0 SCB_CONTROL[0x40] SCB_SCSIID[0x57] 
 SCB_LUN[0x0] SCB_TAG[0xe] 
   1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
   9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
  15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] 
 SCB_LUN[0xff] SCB_TAG[0xff] 
 Pending list: 
  14 SCB_CONTROL[0x40] SCB_SCSIID[0x57] 
 SCB_LUN[0x0] 
 Kernel Free SCB list: 13 12 11 10 9 8 7 6 5 4 3 2 1 0 
 Untagged Q(5): 14 

 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
 sg[0] - Addr 0x12cdec8 : Length 36
 probe(ahc1:0:5:0): ahc1: no longer in timeout, status = 0
 ahc1: Issued Channel A Bus Reset. 1 SCBs aborted

 (and then the kernel hangs.)

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.