NetBSD Problem Report #26910

Received: (qmail 27536 invoked by uid 605); 11 Sep 2004 10:07:02 -0000
Message-Id: <200409110933.i8B9X0w16669@nucleus.styrophone.net>
Date: Sat, 11 Sep 2004 02:33:00 -0700 (PDT)
From: Tyler M Mitchell <fission@styrophone.net>
Sender: gnats-bugs-owner@NetBSD.org
To: gnats-bugs@gnats.netbsd.org
Subject: 2.0_BETA hangs after a UDMA failure/downgrade
X-Send-Pr-Version: 3.95

>Number:         26910
>Category:       port-i386
>Synopsis:       2.0_BETA hangs after a UDMA failure/downgrade
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    bouyer
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Sep 11 10:08:00 +0000 2004
>Closed-Date:    Sat Sep 11 23:58:47 +0000 2004
>Last-Modified:  Sat Sep 11 23:59:00 +0000 2004
>Originator:     Tyler Mitchell
>Release:        NetBSD 2.0_BETA
>Organization:
>Environment:


NetBSD 2.0_BETA (GENERIC.DEBUG) #0: Sat Sep 11 01:16:06 PDT 2004
	fission@monopole:/usr/obj/sys/arch/i386/compile.i386/GENERIC.DEBUG
Architecture: i386
Machine: i386
>Description:
I recently tried to compile and boot a GENERIC 2.0_BETA kernel, but it 
seemed to lock up on me immediately after doing a UDMA downgrade.
Because I don't have a serial console, I can only provide the dmesg from
1.6.2; I've indicated at what point 2.0_BETA would freeze.

I have built a GENERIC.DEBUG kernel (w/ DIAGNOSTIC, DEBUG, and LOCKDEBUG) 
for testing purposes.  I would be more than happy to perform any 
additional testing required.  A trace from ddb (which I typed by hand...):

-- interrupt --
cpu_switch(...) at netbsd:cpu_switch+0xd5
ltsleep(...) at netbsd:ltsleep+0x4a3
biowait(...) at netbsd:biowait+0xdf
read_sector(...) at netbsd:read_sector+0xd8
scan_mbr(...) at netbsd:scan_mbr+0x2e
readdisklabel(...) at netbsd:readdisklabel+0xc8
wdgetdisklabel(...) at netbsd:wdgetdisklabel+0x90
wdopen(...) at netbsd:wdopen+0x207
spec_open(...) at netbsd:spec_open+0x20d
VOP_OPEN(...) at netbsd:VOP_OPEN+0x34
rf_find_raid_components(...) at netbsd:rf_find_raid_components+0x102
rf_autoconfig(...) at netbsd:rf_autoconfig+0x30
config_finalize(...) at netbsd:config_finalize+0x1d
main(...) at netbsd:main+0x3cf

For some reason, this hard drive advertises that it works at UDMA5, but it 
always seems to fail and reverts back to UDMA2.  (Well, in 1.6.2 it does.)

* * *

NetBSD 1.6.2 (GENERIC) #0: Tue Feb 10 21:53:10 UTC 2004
    autobuild@tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002/i386/OBJ/autobuild/netbsd-1-6-PATCH002/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 1195.27 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 255 MB
avail memory = 230 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xfb130
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 KT133 System Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 KT133 PCI to AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: 3Dfx Interactive Voodoo3 (rev. 0x01)
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 1: <CREATIVEDVD-ROM DVD2240E    10/13/97, , 1.5A> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at pciide0 channel 0 drive 0: <Maxtor 93073H4>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29311 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 60030432 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x40)
auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 5
auvia0: ICE17 codec; headphone, 18 bit DAC, 18 bit ADC, Unknown 3D
audio0 at auvia0: full duplex, mmap, independent
fxp0 at pci0 dev 9 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:90:27:8c:8a:b3
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0 at pci0 dev 10 function 0
bktr0: interrupting at irq 5
bktr0: Warning - card vendor 0x107d (model 0x6606) unknown.
bktr0: Pinnacle/Miro TV, <no> tuner.
Brooktree product 0x0878 (miscellaneous multimedia, revision 0x11) at pci0 dev 10 function 1 not configured
emuxki0 at pci0 dev 12 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x08)
emuxki0: interrupting at irq 9
emuxki0: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio1 at emuxki0: full duplex, mmap, independent
Creative Labs PCI Gameport Joystick (miscellaneous input, revision 0x08) at pci0 dev 12 function 1 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
biomask e565 netmask ed65 ttymask fde7
Kernelized RAIDframe activated
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd0d: error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: (aborted command, interface CRC error)

	===> At this point, it would freeze in 2.0_BETA.
	===> In 1.6.2 it continues after downgrading.

wd0: soft error (corrected)
ugen0 at uhub1 port 2
ugen0: Genesys Logic USB Host To Host Bridge, rev 1.00/1.80, addr 2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
	Boot with an ATA hard drive that incorrectly advertises its
	capabilities.  It downgrades to a lower setting, then the kernel hangs.
>Fix:
	Hardcoding the correct UDMA mode allows the kernel to boot.
	For example, on my system I used:

		wd*	at atabus? drive ? flags 0x0a00
>Release-Note:
>Audit-Trail:

From: "Frank Kardel" <Frank.Kardel@Acrys.COM>
To: "Tyler M Mitchell" <fission@styrophone.net>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: port-i386/26910: 2.0_BETA hangs after a UDMA failure/downgrade
Date: Sat, 11 Sep 2004 17:12:11 +0200 (CEST)

 See also kern/26873 - same issue.

 Regards
   Frank

 >
 >>Number:         26910
 >>Category:       port-i386
 >>Synopsis:       2.0_BETA hangs after a UDMA failure/downgrade
 >>Confidential:   no
 >>Severity:       serious
 >>Priority:       high
 >>Responsible:    port-i386-maintainer
 >>State:          open
 >>Class:          sw-bug
 >>Submitter-Id:   net
 >>Arrival-Date:   Sat Sep 11 10:08:00 UTC 2004
 >>Closed-Date:
 >>Last-Modified:
 >>Originator:     Tyler Mitchell
 >>Release:        NetBSD 2.0_BETA
 >>Organization:
 >>Environment:
 >
 >
 > NetBSD 2.0_BETA (GENERIC.DEBUG) #0: Sat Sep 11 01:16:06 PDT 2004
 > 	fission@monopole:/usr/obj/sys/arch/i386/compile.i386/GENERIC.DEBUG
 > Architecture: i386
 > Machine: i386
 >>Description:
 > I recently tried to compile and boot a GENERIC 2.0_BETA kernel, but it
 > seemed to lock up on me immediately after doing a UDMA downgrade.
 > Because I don't have a serial console, I can only provide the dmesg from
 > 1.6.2; I've indicated at what point 2.0_BETA would freeze.
 >
 > I have built a GENERIC.DEBUG kernel (w/ DIAGNOSTIC, DEBUG, and LOCKDEBUG)
 > for testing purposes.  I would be more than happy to perform any
 > additional testing required.  A trace from ddb (which I typed by hand...):
 >
 > -- interrupt --
 > cpu_switch(...) at netbsd:cpu_switch+0xd5
 > ltsleep(...) at netbsd:ltsleep+0x4a3
 > biowait(...) at netbsd:biowait+0xdf
 > read_sector(...) at netbsd:read_sector+0xd8
 > scan_mbr(...) at netbsd:scan_mbr+0x2e
 > readdisklabel(...) at netbsd:readdisklabel+0xc8
 > wdgetdisklabel(...) at netbsd:wdgetdisklabel+0x90
 > wdopen(...) at netbsd:wdopen+0x207
 > spec_open(...) at netbsd:spec_open+0x20d
 > VOP_OPEN(...) at netbsd:VOP_OPEN+0x34
 > rf_find_raid_components(...) at netbsd:rf_find_raid_components+0x102
 > rf_autoconfig(...) at netbsd:rf_autoconfig+0x30
 > config_finalize(...) at netbsd:config_finalize+0x1d
 > main(...) at netbsd:main+0x3cf
 >
 > For some reason, this hard drive advertises that it works at UDMA5, but it
 > always seems to fail and reverts back to UDMA2.  (Well, in 1.6.2 it does.)
 >
 > * * *
 >
 > NetBSD 1.6.2 (GENERIC) #0: Tue Feb 10 21:53:10 UTC 2004
 >     autobuild@tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002/i386/OBJ/autobuild/netbsd-1-6-PATCH002/src/sys/arch/i386/compile/GENERIC
 > cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 1195.27 MHz
 > cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
 > cpu0: L2 cache 256 KB 64b/line 16-way
 > cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
 > cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
 > cpu0: features 183f9ff<FXSR>
 > total memory = 255 MB
 > avail memory = 230 MB
 > using 3296 buffers containing 13184 KB of memory
 > BIOS32 rev. 0 found at 0xfb130
 > mainbus0 (root)
 > pci0 at mainbus0 bus 0: configuration mode 1
 > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 > pchb0 at pci0 dev 0 function 0
 > pchb0: VIA Technologies VT8363 KT133 System Controller (rev. 0x03)
 > agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
 > ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 KT133 PCI to AGP
 > Bridge (rev. 0x00)
 > pci1 at ppb0 bus 1
 > pci1: i/o space, memory space enabled
 > vga1 at pci1 dev 0 function 0: 3Dfx Interactive Voodoo3 (rev. 0x01)
 > pci_mem_find: void region
 > pci_mem_find: void region
 > pci_mem_find: void region
 > wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 > wsmux1: connecting to wsdisplay0
 > pcib0 at pci0 dev 7 function 0
 > pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev.
 > 0x40)
 > pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo
 > KX133) ATA100 controller
 > pciide0: bus-master DMA support present
 > pciide0: primary channel configured to compatibility mode
 > atapibus0 at pciide0 channel 0: 2 targets
 > cd0 at atapibus0 drive 1: <CREATIVEDVD-ROM DVD2240E    10/13/97, , 1.5A>
 > type 5 cdrom removable
 > cd0: 32-bit data port
 > cd0: drive supports PIO mode 4, DMA mode 2
 > wd0 at pciide0 channel 0 drive 0: <Maxtor 93073H4>
 > wd0: drive supports 16-sector PIO transfers, LBA addressing
 > wd0: 29311 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 60030432
 > sectors
 > wd0: 32-bit data port
 > wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 > pciide0: primary channel interrupting at irq 14
 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
 > DMA data transfers)
 > cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
 > pciide0: secondary channel configured to compatibility mode
 > pciide0: disabling secondary channel (no drives)
 > uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller
 > (rev. 0x16)
 > uhci0: interrupting at irq 10
 > usb0 at uhci0: USB revision 1.0
 > uhub0 at usb0
 > uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller
 > (rev. 0x16)
 > uhci1: interrupting at irq 10
 > usb1 at uhci1: USB revision 1.0
 > uhub1 at usb1
 > uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 > uhub1: 2 ports with 2 removable, self powered
 > pchb1 at pci0 dev 7 function 4
 > pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x40)
 > auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev 0x50)
 > auvia0: interrupting at irq 5
 > auvia0: ICE17 codec; headphone, 18 bit DAC, 18 bit ADC, Unknown 3D
 > audio0 at auvia0: full duplex, mmap, independent
 > fxp0 at pci0 dev 9 function 0: i82559 Ethernet, rev 8
 > fxp0: interrupting at irq 11
 > fxp0: Ethernet address 00:90:27:8c:8a:b3
 > inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > bktr0 at pci0 dev 10 function 0
 > bktr0: interrupting at irq 5
 > bktr0: Warning - card vendor 0x107d (model 0x6606) unknown.
 > bktr0: Pinnacle/Miro TV, <no> tuner.
 > Brooktree product 0x0878 (miscellaneous multimedia, revision 0x11) at pci0
 > dev 10 function 1 not configured
 > emuxki0 at pci0 dev 12 function 0: Creative Labs SBLive! EMU 10000 (audio
 > multimedia, revision 0x08)
 > emuxki0: interrupting at irq 9
 > emuxki0: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal
 > Semi 3D
 > audio1 at emuxki0: full duplex, mmap, independent
 > Creative Labs PCI Gameport Joystick (miscellaneous input, revision 0x08)
 > at pci0 dev 12 function 1 not configured
 > isa0 at pcib0
 > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 > com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 > pckbc0 at isa0 port 0x60-0x64
 > pckbd0 at pckbc0 (kbd slot)
 > pckbc0: using irq 1 for kbd slot
 > wskbd0 at pckbd0: console keyboard, using wsdisplay0
 > pms0 at pckbc0 (aux slot)
 > pckbc0: using irq 12 for aux slot
 > wsmouse0 at pms0 mux 0
 > lpt0 at isa0 port 0x378-0x37b irq 7
 > pcppi0 at isa0 port 0x61
 > midi0 at pcppi0: PC speaker
 > sysbeep0 at pcppi0
 > isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 > npx0 at isa0 port 0xf0-0xff: using exception 16
 > isapnp0: no ISA Plug 'n Play devices found
 > biomask e565 netmask ed65 ttymask fde7
 > Kernelized RAIDframe activated
 > wd0: transfer error, downgrading to Ultra-DMA mode 2
 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
 > data transfers)
 > cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
 > wd0d: error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
 > wd0: (aborted command, interface CRC error)
 >
 > 	===> At this point, it would freeze in 2.0_BETA.
 > 	===> In 1.6.2 it continues after downgrading.
 >
 > wd0: soft error (corrected)
 > ugen0 at uhub1 port 2
 > ugen0: Genesys Logic USB Host To Host Bridge, rev 1.00/1.80, addr 2
 > boot device: wd0
 > root on wd0a dumps on wd0b
 > root file system type: ffs
 > wsdisplay0: screen 1 added (80x25, vt100 emulation)
 > wsdisplay0: screen 2 added (80x25, vt100 emulation)
 > wsdisplay0: screen 3 added (80x25, vt100 emulation)
 > wsdisplay0: screen 4 added (80x25, vt100 emulation)
 >>How-To-Repeat:
 > 	Boot with an ATA hard drive that incorrectly advertises its
 > 	capabilities.  It downgrades to a lower setting, then the kernel hangs.
 >>Fix:
 > 	Hardcoding the correct UDMA mode allows the kernel to boot.
 > 	For example, on my system I used:
 >
 > 		wd*	at atabus? drive ? flags 0x0a00
 >>Release-Note:
 >>Audit-Trail:
 >>Unformatted:
 >
 >
 >
 >


From: Manuel Bouyer <bouyer@antioche.eu.org>
To: Tyler M Mitchell <fission@styrophone.net>
Cc: gnats-bugs@gnats.netbsd.org, netbsd-bugs@netbsd.org
Subject: Re: port-i386/26910: 2.0_BETA hangs after a UDMA failure/downgrade
Date: Sat, 11 Sep 2004 19:35:27 +0200

 --KsGdsel6WgEHnImy
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline

 On Sat, Sep 11, 2004 at 02:33:00AM -0700, Tyler M Mitchell wrote:
 > [...]
 > isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 > npx0 at isa0 port 0xf0-0xff: using exception 16
 > isapnp0: no ISA Plug 'n Play devices found
 > biomask e565 netmask ed65 ttymask fde7
 > Kernelized RAIDframe activated
 > wd0: transfer error, downgrading to Ultra-DMA mode 2
 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
 > cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
 > wd0d: error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
 > wd0: (aborted command, interface CRC error)
 > 
 > 	===> At this point, it would freeze in 2.0_BETA.
 > 	===> In 1.6.2 it continues after downgrading.

 Hi,
 please try the attached patch. If fixes the problem on my testbed.

 -- 
 Manuel Bouyer <bouyer@antioche.eu.org>
      NetBSD: 26 ans d'experience feront toujours la difference
 --

 --KsGdsel6WgEHnImy
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename=diff

 Index: wdc.c
 ===================================================================
 RCS file: /cvsroot/src/sys/dev/ic/wdc.c,v
 retrieving revision 1.172.2.5
 diff -u -r1.172.2.5 wdc.c
 --- wdc.c	11 Aug 2004 19:43:58 -0000	1.172.2.5
 +++ wdc.c	11 Sep 2004 17:33:59 -0000
 @@ -995,6 +995,7 @@
  	if ((flags & AT_POLL) == 0) {
  		if (chp->ch_flags & WDCF_TH_RESET) {
  			/* no need to schedule a reset more than one time */
 +			chp->ch_queue->queue_freeze--;
  			return;
  		}
  		chp->ch_flags |= WDCF_TH_RESET;

 --KsGdsel6WgEHnImy--
State-Changed-From-To: open->feedback 
State-Changed-By: bouyer 
State-Changed-When: Sat Sep 11 18:03:04 UTC 2004 
State-Changed-Why:  
I submitted a patch to try.   


Responsible-Changed-From-To: port-i386-maintainer->bouyer 
Responsible-Changed-By: bouyer 
Responsible-Changed-When: Sat Sep 11 18:03:04 UTC 2004 
Responsible-Changed-Why:  
I have a patch for this. 

From: Havard Eidnes <he@netbsd.org>
To: gnats-bugs@gnats.NetBSD.org
Cc:  
Subject: pr/26910 CVS commit: [netbsd-2-0] src/sys/dev/ic
Date: Sat, 11 Sep 2004 18:32:01 +0000 (UTC)

 Module Name:	src
 Committed By:	he
 Date:		Sat Sep 11 18:32:01 UTC 2004

 Modified Files:
 	src/sys/dev/ic [netbsd-2-0]: wdc.c

 Log Message:
 Apply patch (requested by bouyer in ticket #840):
   If we are not going to handle a reset request because one is
   already pending, decrease queue_freeze that we just increased.
   Otherwise, the queue stays frozen after the reset.
   Should fix PR#26873 and PR#26910.


 To generate a diff of this commit:
 cvs rdiff -r1.172.2.5 -r1.172.2.6 src/sys/dev/ic/wdc.c

 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.


From: Tyler Mitchell <fission@styrophone.net>
To: Manuel Bouyer <bouyer@antioche.eu.org>
Cc: gnats-bugs@gnats.netbsd.org, netbsd-bugs@netbsd.org
Subject: Re: port-i386/26910: 2.0_BETA hangs after a UDMA failure/downgrade
Date: Sat, 11 Sep 2004 15:02:12 -0700 (PDT)

 On Sat, 11 Sep 2004, Manuel Bouyer wrote:

 > Hi,
 > please try the attached patch. If fixes the problem on my testbed.

 The patch does indeed solve the problem.  Thank you!

 -- 
 Tyler Mitchell <fission@styrophone.net>
State-Changed-From-To: feedback->closed 
State-Changed-By: bouyer 
State-Changed-When: Sat Sep 11 23:58:01 UTC 2004 
State-Changed-Why:  
Problem fixed by patch. 

From: Manuel Bouyer <bouyer@antioche.eu.org>
To: Tyler Mitchell <fission@styrophone.net>
Cc: gnats-bugs@gnats.netbsd.org, netbsd-bugs@netbsd.org
Subject: Re: port-i386/26910: 2.0_BETA hangs after a UDMA failure/downgrade
Date: Sun, 12 Sep 2004 01:58:26 +0200

 On Sat, Sep 11, 2004 at 03:02:12PM -0700, Tyler Mitchell wrote:
 > On Sat, 11 Sep 2004, Manuel Bouyer wrote:
 > 
 > >Hi,
 > >please try the attached patch. If fixes the problem on my testbed.
 > 
 > The patch does indeed solve the problem.  Thank you!

 OK, this has been commited and pulled up to the 2.0 branch.

 -- 
 Manuel Bouyer <bouyer@antioche.eu.org>
      NetBSD: 26 ans d'experience feront toujours la difference
 --
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.