NetBSD Problem Report #27237

Received: (qmail 29893 invoked by uid 605); 12 Oct 2004 17:55:39 -0000
Message-Id: <20041012173425.704CD4D0F@minako.z-planet.co.jp>
Date: Wed, 13 Oct 2004 02:34:25 +0900 (JST)
From: clare@znet.or.jp
Sender: gnats-bugs-owner@NetBSD.org
Reply-To: clare@znet.or.jp
To: gnats-bugs@gnats.NetBSD.org
Subject: Roland SD-90 Audio I/F may hate set_sample_rate thing
X-Send-Pr-Version: 3.95

>Number:         27237
>Category:       kern
>Synopsis:       Roland SD-90 Audio I/F may hate set_sample_rate thing
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    kent
>State:          closed
>Class:          change-request
>Submitter-Id:   net
>Arrival-Date:   Tue Oct 12 17:56:00 +0000 2004
>Closed-Date:    Sat Oct 30 18:00:05 +0000 2004
>Last-Modified:  Sat Oct 30 18:00:05 +0000 2004
>Originator:     DHOYASHIKI Shinichi <clare@znet.or.jp>
>Release:        NetBSD 2.99.9 near 2004-10-04
>Organization:
at home
>Environment:


System: NetBSD minako 2.99.9 NetBSD 2.99.9 (MINAKO5) #2: Mon Oct 4 11:11:00 JST 2004
	clare@minako:/work/netbsd/sys/arch/i386/compile/MINAKO5 i386
Architecture: i386
Machine: i386
>Description:
	Roland SD-90 may hate uaudio(4)'s set_sample_rate request, and does not
	respond by proper error handling (no STALL replied immediately.)
	Therefore, uaudio(4) freezes until USB request timed up.

	Roland SD-90 is fixed-sample-rate device, no set_sample_rate was needed
	to play with it.
>How-To-Repeat:
	1) prepare uaudio(4) enabled kernel
	2) attach Roland SD-90 Audio I/F (generic mode) to your computer
	   via USB cable
	3) play a waveform via audioplay(1)
>Fix:
	To avoid hitting a bug of the device, may be needed adding a quirk to
	uaudio(4) driver.

	http://www.znet.or.jp/~clare/music/umidi3.diff
	(this is mixtured patch, sorry.)
>Release-Note:
>Audit-Trail:

From: TAMURA Kent <kent@NetBSD.org>
To: gnats-bugs@gnats.NetBSD.org
Cc:  
Subject: Re: kern/27237: Roland SD-90 Audio I/F may hate set_sample_rate thing
Date: Sun, 17 Oct 2004 22:34:05 +0900 (JST)

 Would you show dmesg output of SD-90 with UAUDIO_DEBUG?

 -- 
 TAMURA Kent <kent2004? at hauN.org> <kent at NetBSD.org>

From: DHOYASHIKI Shinichi <clare@znet.or.jp>
To: kent@netbsd.org
Cc: gnats-bugs@gnats.NetBSD.org
Subject: Re: kern/27237: Roland SD-90 Audio I/F may hate set_sample_rate thing
Date: Fri, 29 Oct 2004 23:49:23 +0900 (JST)

 Hello,

 Following is extracted from my dmesg output relating Roland SD-90
 USB Audio I/F part (with generic driver mode).

 <<<<<<
 NetBSD 2.99.10 (MINAKO5) #5: Wed Oct 27 13:05:32 JST 2004
 	clare@minako:/work/netbsd/sys/arch/i386/compile/MINAKO5
 total memory = 766 MB
 avail memory = 742 MB
 BIOS32 rev. 0 found at 0xfd780
 mainbus0 (root)
 cpu0 at mainbus0: (uniprocessor)
 cpu0: Intel Pentium M (Banias) (686-class), 1404.44 MHz, id 0x695
 cpu0: features a7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
 cpu0: features a7e9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
 cpu0: features a7e9f9bf<FXSR,SSE,SSE2,TM,SBF>
 cpu0: features2 180<EST,TM2>
 cpu0: "Intel(R) Pentium(R) M processor 1400MHz"
 cpu0: using thermal monitor 2
 cpu0: Enhanced SpeedStep running at 1400 MHz (1484 mV)
 cpu0: Enhanced SpeedStep frequencies available (MHz): 1400 1200 1000 800 600
 acpi0 at mainbus0
 acpi0: using Intel ACPI CA subsystem version 20040211
 acpi0: X/RSDT: OemId <IBM   ,TP-1Q   ,00001010>, AslId < LTP,00000000>
 acpi0: found ECDT, GPE 28
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 (...snip...)
 ehci0: handing over full speed device on port 4 to uhci1
 uhub3: port 4, device disappeared after reset
 uaudio0 at uhub1 port 2 configuration 1 interface 0: Roland EDIROL SD-90, rev 1.10/1.00, addr 2
 id 1:	AC_INPUT type=UAT_STREAM
 	input0: UAT_STREAM 
 	output: UATO_DESKTOPSPEAKER 
 id 3:	AC_OUTPUT type=UATO_DESKTOPSPEAKER src=1
 	input0: UAT_STREAM 
 	output: UATO_DESKTOPSPEAKER 
 id 4:	AC_INPUT type=UATE_DIGITALAUIFC
 	input0: UATE_DIGITALAUIFC 
 	output: UAT_STREAM 
 id 7:	AC_OUTPUT type=UAT_STREAM src=4
 	input0: UATE_DIGITALAUIFC 
 	output: UAT_STREAM 
 uaudio0: playback: 2ch, 16/16bit, pcm, 44100Hz
 uaudio0: recording: 2ch, 16/16bit, pcm, 44100Hz
 uaudio0: audio rev 1.00
 uaudio0: 0 mixer controls
 audio1 at uaudio0: full duplex, independent
 auconv_check_params: rate=8000:44100 chan=1:2 prec=8:16 enc=1:6
 auconv_check_params: rate=8000:44100 chan=1:2 prec=8:16 enc=1:6
 umidi0 at uhub1 port 2 configuration 1 interface 3
 umidi0: Roland EDIROL SD-90, rev 1.10/1.00, addr 2
 umidi0: (genuine USB-MIDI)
 umidi0: out=4, in=4
 midi0 at umidi0: USB MIDI I/F
 midi1 at umidi0: USB MIDI I/F
 midi2 at umidi0: USB MIDI I/F
 midi3 at umidi0: USB MIDI I/F
 >>>>>

 I have also Roland M-1000 USB Audio I/F (with generic driver mode),
 following is just FYI.

 <<<<<
 ehci0: handing over full speed device on port 4 to uhci1
 uhub3: port 4, device disappeared after reset
 uaudio0 at uhub1 port 2 configuration 1 interface 0: Roland ROLAND M-1000, rev 1.10/1.00, addr 2
 id 1:   AC_INPUT type=UAT_STREAM
         input0: UAT_STREAM 
         output: UATO_DESKTOPSPEAKER 
 id 3:   AC_OUTPUT type=UATO_DESKTOPSPEAKER src=1
         input0: UAT_STREAM 
         output: UATO_DESKTOPSPEAKER 
 id 4:   AC_INPUT type=UATE_DIGITALAUIFC
         input0: UATE_DIGITALAUIFC 
         output: UAT_STREAM 
 id 7:   AC_OUTPUT type=UAT_STREAM src=4
         input0: UATE_DIGITALAUIFC 
         output: UAT_STREAM 
 uaudio0: playback: 2ch, 16/16bit, pcm, 44100Hz
 uaudio0: recording: 2ch, 16/16bit, pcm, 44100Hz
 uaudio0: audio rev 1.00
 uaudio0: 0 mixer controls
 audio1 at uaudio0: full duplex, independent
 >>>>>

 --
 DHOYASHIKI Shinichi  <clare@znet.or.jp>
State-Changed-From-To: open->analyzed 
State-Changed-By: kent 
State-Changed-When: Fri Oct 29 16:14:42 UTC 2004 
State-Changed-Why:  


Responsible-Changed-From-To: kern-bug-people->kent  
Responsible-Changed-By: kent 
Responsible-Changed-When: Fri Oct 29 16:14:42 UTC 2004 
Responsible-Changed-Why:  

From: TAMURA Kent <kent@netbsd.org>
To: gnats-bugs@gnats.NetBSD.org
Cc:  
Subject: pr/27237 CVS commit: src/sys/dev/usb
Date: Fri, 29 Oct 2004 17:12:53 +0000 (UTC)

 Module Name:	src
 Committed By:	kent
 Date:		Fri Oct 29 17:12:53 UTC 2004

 Modified Files:
 	src/sys/dev/usb: uaudio.c

 Log Message:
 * uaudio_chan_open()
   Call uaudio_set_speed() if and only if the selected Audio Streaming
 interface supports multiple sampling rates.
   Address PR#27237


 To generate a diff of this commit:
 cvs rdiff -r1.89 -r1.90 src/sys/dev/usb/uaudio.c

 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.

State-Changed-From-To: analyzed->feedback 
State-Changed-By: kent 
State-Changed-When: Fri Oct 29 17:13:32 UTC 2004 
State-Changed-Why:  
Please test uaudio.c rev.1.90. 

From: DHOYASHIKI Shinichi <clare@znet.or.jp>
To: kent@netbsd.org
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/27237
Date: Sat, 30 Oct 2004 23:58:10 +0900 (JST)

 Hello,

 >Please test uaudio.c rev.1.90.

 My SD-90 is nicely worked with it, both 44.1kHz and 48kHz mode.
 Thank you.

 --
 DHOYASHIKI Shinichi  <clare@znet.or.jp>
State-Changed-From-To: feedback->closed 
State-Changed-By: kent 
State-Changed-When: Sat Oct 30 17:59:42 UTC 2004 
State-Changed-Why:  
confirmed 
>Unformatted:
 >Quarter:        
 >Keywords:       
 >Date-Required:  

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.