NetBSD Problem Report #32690

From www@netbsd.org  Wed Feb  1 14:44:25 2006
Return-Path: <www@netbsd.org>
Received: by narn.netbsd.org (Postfix, from userid 31301)
	id 99FDF63B876; Wed,  1 Feb 2006 14:44:25 +0000 (UTC)
Message-Id: <20060201144425.99FDF63B876@narn.netbsd.org>
Date: Wed,  1 Feb 2006 14:44:25 +0000 (UTC)
From: leleobhz@rootshell.be
Reply-To: leleobhz@rootshell.be
To: gnats-bugs@netbsd.org
Subject: Cant make DWL-G510 work with ath driver
X-Send-Pr-Version: www-1.0

>Number:         32690
>Category:       kern
>Synopsis:       Cant make DWL-G510 work with ath driver
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          change-request
>Submitter-Id:   net
>Arrival-Date:   Wed Feb 01 14:45:00 +0000 2006
>Last-Modified:  Sat Jul 01 21:19:26 +0000 2006
>Originator:     Leonardo Amaral
>Release:        NetBSD 3.0 i386
>Organization:
>Environment:
<Due some problems, i dont have access to machine now..>
>Description:
I have a Dlink DWL-510, and http://madwifi.org/wiki/Compatibility#DWLG510 say my card is Atheros AR5212. As i see, its compatible with NetBSD kernel, but dmesg say it isnt configured, and no device appear on ifconfig...
>How-To-Repeat:

>Fix:

>Release-Note:

>Audit-Trail:
From: Martin Husemann <martin@duskware.de>
To: leleobhz@rootshell.be
Cc: gnats-bugs@NetBSD.org
Subject: Re: kern/32690: Cant make DWL-G510 work with ath driver
Date: Wed, 1 Feb 2006 15:50:26 +0100

 On Wed, Feb 01, 2006 at 02:45:00PM +0000, leleobhz@rootshell.be wrote:

 > but dmesg say it isnt configured

 Please quote this part of dmesg verbatim (with a few lines of context on
 both sides, just to be sure).

 Martin

From: Leonardo Amaral <leleobhz@rootshell.be>
To: Martin Husemann <martin@duskware.de>
Cc: gnats-bugs@NetBSD.org
Subject: Re: kern/32690: Cant make DWL-G510 work with ath driver
Date: Thu, 2 Feb 2006 00:35:56 +0100

 --ReaqsoxgOBHFXBhH
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline
 Content-Transfer-Encoding: quoted-printable

 * Martin Husemann (martin@duskware.de) wroten:
 > On Wed, Feb 01, 2006 at 02:45:00PM +0000, leleobhz@rootshell.be wrote:
 >=20
 > > but dmesg say it isnt configured
 >
 > Please quote this part of dmesg verbatim (with a few lines of context on
 > both sides, just to be sure).
 >=20
 > Martin

 Here is it:

 NetBSD  3.0 NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005  builds@w=
 orks.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/h=
 ome/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC i386


 NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
 	builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/2005121820=
 24Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
 total memory =3D 127 MB
 avail memory =3D 116 MB
 BIOS32 rev. 0 found at 0xfdaf0
 mainbus0 (root)
 cpu0 at mainbus0: (uniprocessor)
 cpu0: Intel Pentium/MMX (586-class), 166.28 MHz, id 0x543
 cpu0: features 8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
 cpu0: features 8001bf<MMX>
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Acer Labs M1531 Host-PCI Bridge (rev. 0xb3)
 pcib0 at pci0 dev 2 function 0
 pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0xb4)
 vga1 at pci0 dev 4 function 0: Cirrus Logic CL-GD5434-8 (rev. 0xf9)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 ex0 at pci0 dev 5 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
 ex0: interrupting at irq 9
 ex0: MAC address 00:60:08:c5:b8:d3
 nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 Atheros Communications product 0x001a (ethernet network, revision 0x01) at =
 pci0 dev 6 function 0 not configured
 aceride0 at pci0 dev 11 function 0
 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0x20)
 aceride0: bus-master DMA support present
 aceride0: primary channel configured to compatibility mode
 aceride0: primary channel interrupting at irq 14
 atabus0 at aceride0 channel 0
 aceride0: secondary channel configured to compatibility mode
 aceride0: secondary channel interrupting at irq 15
 atabus1 at aceride0 channel 1
 ohci0 at pci0 dev 15 function 0: Acer Labs M5237 USB 1.1 Host Controller (r=
 ev. 0x03)
 ohci0: interrupting at irq 11
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff: using exception 16
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 isapnp0: read port 0x203
 isapnp0: <SupraExpress 336i PnP Modem, SUP1311, SUP1310, > port 0x3e8/8 irq=
  4 not configured
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 fd1 at fdc0 drive 1: 1.2MB, 80 cyl, 2 head, 15 sec
 Kernelized RAIDframe activated
 umass0 at uhub0 port 2 configuration 1 interface 0
 umass0: Generic USB Storage Device, rev 1.10/1.00, addr 2
 umass0: using SCSI over Bulk-Only
 scsibus0 at umass0: 2 targets, 4 luns per target
 sd0 at scsibus0 target 0 lun 0: <IC, USB Storage-CFC, 301b> disk removable
 sd0: fabricating a geometry
 sd0: 122 MB, 122 cyl, 64 head, 32 sec, 512 bytes/sect x 250368 sectors
 sd1 at scsibus0 target 0 lun 1: <IC, USB Storage-SMC, 301b> disk removable
 sd1: drive offline
 sd2 at scsibus0 target 0 lun 2: <IC, USB Storage-MMC, 301b> disk removable
 sd2: drive offline
 sd3 at scsibus0 target 0 lun 3: <IC, USB Storage-MSC, 301b> disk removable
 sd3: drive offline
 wd0 at atabus0 drive 0: <SAMSUNG SP8004H>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 76351 MB, 155127 cyl, 16 head, 63 sec, 512 bytes/sect x 156368016 sect=
 ors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <HITACHI CDR-7930, , 1022> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 3, DMA mode 1
 cd0(aceride0:1:0): using PIO mode 3, DMA mode 1 (using DMA)
 sd0: fabricating a geometry
 sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd0: fabricating a geometry
 sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd0: fabricating a geometry
 sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd0: fabricating a geometry
 sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present

 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 sd0: fabricating a geometry


 --ReaqsoxgOBHFXBhH
 Content-Type: application/pgp-signature
 Content-Disposition: inline

 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.2.1 (GNU/Linux)

 iD8DBQFD4UXa5Wqu+MetwJ4RAg4oAJ0dOfiTPPWStoHiQbILav8h/rnqMgCgwEyp
 FMg0xXicRiCWus25IpFfHVo=
 =ssvc
 -----END PGP SIGNATURE-----

 --ReaqsoxgOBHFXBhH--

From: Martin Husemann <martin@duskware.de>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: kern/32690: Atheros product 0x001a not supported
Date: Thu, 2 Feb 2006 17:16:39 +0100

 Sam Leffler told me that there is currently no released HAL that supports
 this card, but there is one available for testing.

 Unfortunatley the test version would not "just drop in", so doing this
 testing on NetBSD will not be that simple.

 Once the new HAL is officialy released, we will look at importing it
 into NetBSD (though there sometimes is a ... delay before this happens).

 Sorry to have no better news,

 Martin

>Unformatted:

Home	PR Database Search