NetBSD Problem Report #32975

From www@netbsd.org  Fri Mar  3 06:23:23 2006
Return-Path: <www@netbsd.org>
Received: by narn.netbsd.org (Postfix, from userid 31301)
	id 8ECF363B8EA; Fri,  3 Mar 2006 06:23:23 +0000 (UTC)
Message-Id: <20060303062323.8ECF363B8EA@narn.netbsd.org>
Date: Fri,  3 Mar 2006 06:23:23 +0000 (UTC)
From: djb_netbsd@charter.net
Reply-To: djb_netbsd@charter.net
To: gnats-bugs@netbsd.org
Subject: "ifconfig tlp0 manual" required to select 10base2/bnc interface on Multia
X-Send-Pr-Version: www-1.0

>Number:         32975
>Category:       port-alpha
>Synopsis:       "ifconfig tlp0 manual" required to select 10base2/bnc interface on Multia
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    port-alpha-maintainer
>State:          open
>Class:          change-request
>Submitter-Id:   net
>Arrival-Date:   Fri Mar 03 06:25:00 +0000 2006
>Originator:     Dave Barnes
>Release:        NetBSD 3.0
>Organization:
n/a
>Environment:
NetBSD anchovy 3.0 NetBSD 3.0 (2006/01/24 DJB Multia/alpha) #0: Fri Jan 27 19:02:28 CST 2006  root@anchovy:/usr/NetBSD_src/usr/src/sys/arch/alpha/compile/DJB alpha
>Description:
Per Jason's request:
"We now have some  
facilities in the kernel that would make it easier to actually use  
the term "bnc" or "10base2" to select the BNC connector on the Multia."

Currently "ifconfig tlp0 manual" switches the interface to use the 10base2/bnc interface.
>How-To-Repeat:
"ifconfig tlp0 bnc" doesn't work
"ifconfig tlp0 10base2" doesn't work

Declare tlp0 bnc broken:)

Forget that the command was "ifconfig tlp0 manual" for the Multia bnc.
>Fix:
dmesg
=====
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.0 (2006/01/24 DJB Multia/alpha) #0: Fri Jan 27 19:02:28 CST 2006
        root@anchovy:/usr/NetBSD_src/usr/src/sys/arch/alpha/compile/DJB
DEC AXPpci233 MT, 233MHz, s/n ANCHOVY
8192 byte page size, 1 processor.
total memory = 152 MB
(2312 KB reserved for PROM, 149 MB used by NetBSD)
avail memory = 144 MB
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), LCA-2 (21066)

lca0 at mainbus0
pci0 at lca0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 6 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at isa irq 11
scsibus0 at siop0: 8 targets, 8 luns per target
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (rev. 0x84)
tlp0 at pci0 dev 8 function 0: DECchip 21040 Ethernet, pass 2.3
tlp0: interrupting at isa irq 10
tlp0: Ethernet address 08:00:2b:e7:09:e9
tlp0: 10baseT, 10baseT-FDX, 10base5, manual
tga0 at pci0 dev 11 function 0: DC21030 step B, board type T8-02
tga0: 1024 x 768, 8bpp, Bt485 RAMDAC
tga0: interrupting at isa irq 15
wsdisplay0 at tga0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
alpha_shared_intr_establish: isa irq 4: warning: using edge-triggered on level-triggered
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wss0 at isa0 port 0x530-0x537 irq 9 drq 3,1: CS4231A
audio0 at wss0: full duplex, mmap
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff irq 
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0: controller 0 detecting irqs with mask 0x5eb8:..5..14
pcic0: using irq 5 for socket events
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <OEM, DCRS04Z, 0101> disk fixed
sd0: 4340 MB, 6077 cyl, 9 head, 162 sec, 512 bytes/sect x 8888543 sectors
sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers, tagged queueing
st0 at scsibus0 target 2 lun 0: <HP, C1533A, 9608> tape removable
st0: drive empty
st0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
cd0 at scsibus0 target 4 lun 0: <HP, C4324/C4325, 1.27> cdrom removable
cd0: async, 8-bit transfers
sd1 at scsibus0 target 5 lun 0: <MATSHITA, PD-1 LF-1000, A109> optical removable
sd1: drive offline
cd1 at scsibus0 target 5 lun 1: <MATSHITA, PD-1 LF-1000, A109> cdrom removable
sd1: sync (200.00ns offset 8), 8-bit (5.000MB/s) transfers
cd1: sync (200.00ns offset 8), 8-bit (5.000MB/s) transfers
sd2 at scsibus0 target 6 lun 0: <IOMEGA, ZIP 100, E.08> disk removable
sd2: drive offline
sd2: async, 8-bit transfers
root on sd0a dumps on sd0b
root file system type: ffs

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.