NetBSD Problem Report #34161
From zza@serpens.de Tue Aug 8 07:01:44 2006
Return-Path: <zza@serpens.de>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
by narn.NetBSD.org (Postfix) with ESMTP id CC70563B8C3
for <gnats-bugs@gnats.NetBSD.org>; Tue, 8 Aug 2006 07:01:44 +0000 (UTC)
Message-Id: <20060808070128.GB11729@serpens.de>
Date: Tue, 8 Aug 2006 09:01:29 +0200
From: Bernhard Moellemann <zza@serpens.de>
Reply-To: zza@serpens.de
To: gnats-bugs@NetBSD.org
Subject: current GENERIC cannot use ehci on NForce4
X-Send-Pr-Version: 3.95
>Number: 34161
>Category: port-i386
>Synopsis: -current GENERIC cannot use ehci on NForce4
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: port-i386-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Tue Aug 08 07:05:00 +0000 2006
>Last-Modified: Mon Apr 26 06:50:02 +0000 2010
>Originator: Bernhard Moellemann
>Release: NetBSD 3.99.24
>Organization:
>Environment:
System: NetBSD arcanic 3.99.24 NetBSD 3.99.24 (GENERIC.MPACPI) #0: Tue Aug 8 07:23:12 CEST 2006 root@arcanic:/usr/src-3.99.21/obj/sys/arch/i386/compile/GENERIC i386
Architecture: i386
Machine: i386
>Description:
GENERIC with the -current sources from 2006-08-06 for i386 cannot use
usb2 devices.
It configures ohci0 and ehci0, but fails to attach uhub1. From dmesg:
[...]
ohci0 at pci0 dev 2 function 0: NVIDIA nForce4 USB Host Controller (rev. 0xa2)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 2 function 1: NVIDIA nForce4 USB2 Host Controller (rev. 0xa3)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
[...]
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: MOSIC SPEED-LINK Competition Pro, rev 1.10/1.00, addr 2, iclass 3/0
uhid0 at uhidev0: input=3, output=0, feature=0
[...]
uhub1: port 7, set config at addr 2 failed
uhub1: device problem, disabling port 7
[...]
There is no usable USB2-port afterwards.
If I disable ehci in a custom kernel, uhub1 and subsequently umass
get attached to ohci0 and it works (slow of course).
This happens with ACPI, too. It happended since I got this computer
(spring).
I did an ehci-debug kernel earlier but could not interpret the output:
NetBSD 3.99.19 (MULTIC) #2: Tue May 16 11:15:53 CEST 2006
root@arcanic:/usr/src-3.99/sys/arch/i386/compile/MULTIC
total memory = 1023 MB
avail memory = 997 MB
BIOS32 rev. 0 found at 0xf26f0
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Unknown K7 (Athlon) (686-class), 2010.40 MHz, id 0x20fb1
cpu0: features 178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 178bfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMX>
cpu0: features 178bfbff<FXSR,SSE,SSE2,HTT>
cpu0: features2 1<SSE3>
cpu0: "AMD Athlon(tm) 64 X2 Dual Core Processor 3800+"
cpu0: calibrating local timer
cpu0: apic clock running at 201 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: AMD Unknown K7 (Athlon) (686-class), 2010.30 MHz, id 0x20fb1
cpu1: features 178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 178bfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMX>
cpu1: features 178bfbff<FXSR,SSE,SSE2,HTT>
cpu1: features2 1<SSE3>
cpu1: "AMD Athlon(tm) 64 X2 Dual Core Processor 3800+"
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
acpi0: fixing up intr link \_SB_.PCI0.LMCI
acpi0: fixing up intr link \_SB_.PCI0.LIDE
acpi0: fixing up intr link \_SB_.PCI0.LPCA
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A08 [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
[...]
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
lpt0 at acpi0 (PNP0400)
lpt0: io 0x378-0x37f irq 7
pckbc0 at acpi0 (PNP0F13): aux port
pckbc0: irq 12
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 73.0C
acpitz0: critical 75.0C passive 40.0C
pcppi0: attached to attimer0
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA nForce4 Memory Controller (miscellaneous memory, revision 0xa3) at pci0 dev 0 function 0 not configured
NVIDIA product 0x0050 (ISA bridge, revision 0xa3) at pci0 dev 1 function 0 not configured
NVIDIA nForce4 SMBus (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: NVIDIA nForce4 USB Host Controller (rev. 0xa2)
ohci0: interrupting at ioapic0 pin 11 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 2 function 1: NVIDIA nForce4 USB2 Host Controller (rev. 0xa3)
ehci0: offs=32
ehci0: interrupting at ioapic0 pin 10 (irq 10)
ehci_pci_attach: companion ohci0
ehci_dump_caps: legsup=0x01000001 legctlsts=0xe0000000
ehci0: BIOS has given up ownership
ehci_init: start
ehci0: EHCI version 1.0
ehci_init: sparams=0x101488
ehci0: companion controller, 4 ports each: ohci0
ehci_init: cparams=0xa086
ehci0: resetting
ehci0: flsize=1024
ehci_alloc_sqh: allocating chunk
ehci_alloc_sqh: allocating chunk
ehci_alloc_sqh: allocating chunk
ehci_alloc_sqh: allocating chunk
ehci_alloc_sqh: allocating chunk
ehci_alloc_sqh: allocating chunk
ehci_alloc_sqh: allocating chunk
QH(0xcb9d0e40) at 0x0202de40:
link=0x0202de42<QH>
endp=0x0000a000
addr=0x00 inact=0 endpt=0 eps=2 dtc=0 hrecl=1
mpl=0x0 ctl=0 nrl=0
endphub=0x00000000
smask=0x00 cmask=0x00 huba=0x00 port=0 mult=0
curqtd=0x00000001<T>
Overlay qTD:
next=0x00000001<T> altnext=0x00000001<T>
status=0x00000040: toggle=0 bytes=0x0 ioc=0 c_page=0x0
cerr=0 pid=0 stat=0x40<HALTED>
buffer[0]=0x00000000
buffer[1]=0x00000000
buffer[2]=0x00000000
buffer[3]=0x00000000
buffer[4]=0x00000000
ehci_init: enabling
usb at ehci0 not configured
auich0 at pci0 dev 4 function 0: nForce4 AC-97 Audio
auich0: interrupting at ioapic0 pin 10 (irq 10)
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
[more viaide and atabus]
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: NVIDIA nForce4 PCI Host Bridge (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fwohci0 at pci1 dev 2 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 3 (irq 3)
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:50:12:5d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
bktr0 at pci1 dev 3 function 0
bktr0: interrupting at ioapic0 pin 11 (irq 11)
bktr0: Hauppauge Model 37284 B421
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Detected a DPL3418A-A2 at 0x84
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, dpl3518a dolby, remote control.
radio0 at bktr0
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x11) at pci1 dev 3 function 1 not configured
tlp0 at pci1 dev 4 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at ioapic0 pin 3 (irq 3)
tlp0: Ethernet address 00:40:c7:97:65:a5
dmphy0 at tlp0 phy 1: DM9101 (AMD Am79C873) 10/100 media interface, rev. 2
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0 at pci1 dev 5 function 0: Adaptec 29160N Ultra160 SCSI adapter
ahc0: interrupting at ioapic0 pin 11 (irq 11)
ahc0: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
nfe0 at pci0 dev 10 function 0: ioapic0 pin 5 (irq 5), address 00:13:d4:7b:50:44
rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 11 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 12 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 13 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 14 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci5 dev 0 function 0: NVIDIA product 0x0141 (rev. 0xa2)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at mainbus0
ioapic0: enabling
ehci_pcd_able: on=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
atapibus0 at atabus1: 2 targets
scsibus0: waiting 2 seconds for devices to settle...
cd0 at atapibus0 drive 0: <HL-DT-STDVDRRW GWA-4164B, , 1.03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ehci_pcd_able: on=1
sd0 at scsibus0 target 1 lun 0: <COMPAQ, BD03685A24, HPB6> disk fixed
sd0: 34732 MB, 49855 cyl, 2 head, 713 sec, 512 bytes/sect x 71132000 sectors
sd0: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 3 lun 0: <COMPAQ, BD03685A24, HPB6> disk fixed
sd1: 34732 MB, 49855 cyl, 2 head, 713 sec, 512 bytes/sect x 71132000 sectors
sd1: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
sd2 at scsibus0 target 4 lun 0: <SEAGATE, ST336704LSUN36G, 0326> disk fixed
sd2: 34732 MB, 24622 cyl, 27 head, 107 sec, 512 bytes/sect x 71132959 sectors
sd2: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
wd0 at atabus4 drive 0: <ST3250823AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide2:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
raid2: RAID Level 1
raid2: Components: /dev/sd0a /dev/sd1a
raid2: Total Sectors: 70591488 (34468 MB)
raid0: RAID Level 1
raid0: Components: /dev/sd2a component1[**FAILED**]
raid0: Total Sectors: 71040896 (34687 MB)
boot device: raid2
root on raid2a dumps on raid2b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Boot an GENERIC.MPACPI on NForce4 with Athlon 64 X2. Try to use USB2.
>Fix:
none known 8-( A workaround is to disable ehci in the kernel-
configuration. Then ohci0 works, albeit slow.
>Audit-Trail:
From: Bernhard Moellemann <zza@serpens.de>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
Date: Tue, 26 Sep 2006 22:54:03 +0200
It still does not work with 4.0_BETA from 2006-09-25 or 4.99.3 from 2006-09-26.
From: Juan RP <juan@xtrarom.org>
To: gnats-bugs@NetBSD.org
Cc: Bernhard Moellemann <zza@serpens.de>
Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
Date: Tue, 26 Sep 2006 23:08:18 +0200
On Tue, 26 Sep 2006 20:55:04 +0000 (UTC)
Bernhard Moellemann <zza@serpens.de> wrote:
> The following reply was made to PR port-i386/34161; it has been noted
> by GNATS.
>
> From: Bernhard Moellemann <zza@serpens.de>
> To: gnats-bugs@NetBSD.org
> Cc:
> Subject: Re: port-i386/34161: current GENERIC cannot use ehci on
> NForce4 Date: Tue, 26 Sep 2006 22:54:03 +0200
>
> It still does not work with 4.0_BETA from 2006-09-25 or 4.99.3 from
> 2006-09-26.
Please try a -current kernel with sources from at least yesterday, there
were changes in the acpi interrupt code.
Good luck.
From: Bernhard Moellemann <zza@serpens.de>
To: gnats-bugs@NetBSD.org
Cc: juan@xtrarom.org
Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
Date: Wed, 27 Sep 2006 23:19:57 +0200
> Please try a -current kernel with sources from at least yesterday, there
> were changes in the acpi interrupt code.
I did try current from 2006-09-27 3:30GMT and it still disables ehci.
In a second run I applied Manuel Bouyer patches from
http://mail-index.netbsd.org/port-amd64/2006/09/23/0015.html
and it didn't make a difference, too.
From: Andrew Doran <ad@netbsd.org>
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
Date: Fri, 16 Nov 2007 20:15:15 +0000
This is of interest, but I have not investigated fully yet:
http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/i386/i386/mpbios_intr_fixup.c
Andrew
From: "Jonathan A. Kollasch" <jakllsch@kollasch.net>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
Date: Sun, 25 Apr 2010 14:51:38 +0000
The MULTIC kernel config used for testing in this PR lacks usb* at ehci?.
I'd like to see a dmesg from a sufficently-GENERIC netbsd-5 or -current.
FWIW, the interrut pins do look odd compared to my nforce4 board.
From: Bernhard Moellemann <zza@serpens.de>
To: gnats-bugs@NetBSD.org
Cc: port-i386-maintainer@NetBSD.org, gnats-admin@NetBSD.org,
netbsd-bugs@NetBSD.org
Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
Date: Mon, 26 Apr 2010 08:44:10 +0200
On Sun, Apr 25, 2010 at 02:55:01PM +0000, Jonathan A. Kollasch wrote:
> The following reply was made to PR port-i386/34161; it has been noted by GNATS.
>
> From: "Jonathan A. Kollasch" <jakllsch@kollasch.net>
> To: gnats-bugs@NetBSD.org
> Cc:
> Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
> Date: Sun, 25 Apr 2010 14:51:38 +0000
>
> The MULTIC kernel config used for testing in this PR lacks usb* at ehci?.
> I'd like to see a dmesg from a sufficently-GENERIC netbsd-5 or -current.
> FWIW, the interrut pins do look odd compared to my nforce4 board.
Unfortunately I no longer own this hardware 8-(
The most recent dmesg I can offer is this from a 4.99.50, but of cource your
recent changes are not in:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.50 (GENERIC) #4: Tue Jan 29 13:55:30 CET 2008
root@arcanic:/mnt/top/src/src/obj/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 991 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU SIEMENS A8NE-FM (1.XX )
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Athlon 64 X2 (686-class), 2010.42 MHz, id 0x20fb1
cpu0: features f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2 1<SSE3>
cpu0: "AMD Athlon(tm) 64 X2 Dual Core Processor 3800+"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: Initial APIC ID 0
cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: calibrating local timer
cpu0: apic clock running at 201 MHz
cpu0: 8 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: AMD Athlon 64 X2 (686-class), 2010.40 MHz, id 0x20fb1
cpu1: features f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: features2 1<SSE3>
cpu1: "AMD Athlon(tm) 64 X2 Dual Core Processor 3800+"
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 512 KB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: Initial APIC ID 1
cpu1: AMD Power Management features: f<TTP,VID,FID,TS>
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
MBIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
LNK1 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNK3 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LUBA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LMAC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LACI (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LSMB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LUB2 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LSID (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LFID (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APC1 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APC3 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APCF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APCH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APCJ (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APCS (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APCL (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APSI (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
APSJ (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
LPT1 (PNP0400) [Standard LPT printer port] at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PS2K, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
EXPL (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 73.0C critical 75.0C passive 40.0C
apm0 at acpi0: Power Management spec V1.2
pcppi1: attached to attimer1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA nForce4 Memory Controller (miscellaneous memory, revision 0xa3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA nForce4 PCI-ISA bridge (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: NVIDIA nForce4 SMBus (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: NVIDIA nForce4 USB Host Controller (rev. 0xa2)
APCF: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20 (irq 5)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 2 function 1: NVIDIA nForce4 USB2 Host Controller (rev. 0xa3)
APCL: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21 (irq 3)
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
auich0 at pci0 dev 4 function 0: nForce4 AC-97 Audio
APCJ: Picked IRQ 22 with weight 0
auich0: interrupting at ioapic0 pin 22 (irq 11)
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
APSI: Picked IRQ 23 with weight 0
viaide1: using ioapic0 pin 23 (irq 11) for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
APSJ: Picked IRQ 20 with weight 1
viaide2: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: NVIDIA nForce4 PCI Host Bridge (rev. 0xa2)
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled
bktr0 at pci1 dev 3 function 0
APC1: Picked IRQ 16 with weight 0
bktr0: interrupting at ioapic0 pin 16 (irq 3)
bktr0: Hauppauge Model 37284 B421
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Detected a DPL3418A-A2 at 0x84
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, dpl3518a dolby, remote control.
radio0 at bktr0
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x11) at pci1 dev 3 function 1 not configured
nfe0 at pci0 dev 10 function 0: NVIDIA nForce4 Ethernet (rev. 0xa3)
APCH: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21 (irq 10)
nfe0: Ethernet address 00:13:d4:7b:50:44
rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 11 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 12 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 13 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 14 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci5 dev 0 function 0: NVIDIA product 0x0141 (rev. 0xa2)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices K8 AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices K8 AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices K8 AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices K8 AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
Too many symbols for tree, skipping 1663 symbols
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-H42L, K266CEL1642, SL00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
viaide1 port 0: device present, speed: 1.5Gb/s
viaide1 port 1: device present, speed: 1.5Gb/s
viaide2 port 0: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0: <SAMSUNG HD401LJ>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus3 drive 0: <ST3400620AS>
wd1: quirks 2<FORCE_LBA48>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus4 drive 0: <ST3250823AS>
wd2: quirks 2<FORCE_LBA48>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(viaide2:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub1: port 7, set config at addr 2 failed
uhub1: device problem, disabling port 7
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 230693248 (112643 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/dev/wd1e: file system not clean (fs_clean=0); please fsck(8)
/dev/wd1e: lost blocks 0 files 0
acpi0: entering state 3
Devices without power management support: pcppi1 nfsmbc0 nfsmb0 nfsmb1 bktr0 radio0 lpt0 raid0
acpi0: aborting suspend
acpi0: entering state 1
acpi0: cannot enter the sleep state (1)
sorry,
Bernhard //
\X/
>
(Contact us)
$NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.