NetBSD Problem Report #36883

From ryo_on@chocolate.sweets.tetera.org  Sun Sep  2 12:23:51 2007
Return-Path: <ryo_on@chocolate.sweets.tetera.org>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
	by narn.NetBSD.org (Postfix) with ESMTP id B6D4863B8B5
	for <gnats-bugs@gnats.NetBSD.org>; Sun,  2 Sep 2007 12:23:51 +0000 (UTC)
Message-Id: <20070902102536.BB34FBDD7@chocolate.sweets.tetera.org>
Date: Sun,  2 Sep 2007 19:25:36 +0900 (JST)
From: ryo@rf7.so-net.ne.jp
Reply-To: ryo@rf7.so-net.ne.jp
To: gnats-bugs@NetBSD.org
Subject: azalia device doesn't sense plugging of the headphones.
X-Send-Pr-Version: 3.95

>Number:         36883
>Category:       kern
>Synopsis:       azalia device doesn't sense plugging of the headphones.
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Sep 02 12:25:00 +0000 2007
>Closed-Date:    Sun Feb 16 10:47:40 +0000 2020
>Last-Modified:  Sun Feb 16 10:47:40 +0000 2020
>Originator:     Ryo ONODERA
>Release:        NetBSD 4.99.30
>Organization:

>Environment:


System: NetBSD chocolate.sweets.tetera.org 4.99.30 NetBSD 4.99.30 (BRIGHTGIRL) #7: Sun Sep 2 17:20:10 JST 2007 root@chocolate.sweets.tetera.org:/usr/obj/sys/arch/i386/compile/BRIGHTGIRL i386
Architecture: i386
Machine: i386
>Description:
The internal speaker is not muted when using headphones on 945GMS Express chipset machine (Fujitsu FMVLP70WN).

This report includes dmesg with AZALIA_DEBUG, output of mixerctl -av, and my /etc/mixerctl.conf.
I think outputs.unknown0b as the internal speaker and outputs.black0a as the headphones in output of mixerctl.

*** dmesg with AZALIA_DEBUG ***

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.30 (BRIGHTGIRL) #7: Sun Sep  2 17:20:10 JST 2007
	root@chocolate.sweets.tetera.org:/usr/obj/sys/arch/i386/compile/BRIGHTGIRL
total memory = 1013 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 988 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfdc04
pcibios_get_status: function not supported
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Yonah) (686-class), 1197.07 MHz, id 0x6ec
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu0: "Intel(R) Core(TM) Solo CPU     U1400  @ 1.20GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1052 mV) 1200 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: Enhanced SpeedStep frequencies available (MHz): 1200 1067 933 800
cpu0: 64 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated Graphics Device (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
i915drm0 at vga0
info: [drm] Intel i945GM (unit 0)
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.5.0 20060119
Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at irq 11
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
azalia0: host: 4 output, 4 input, and 0 bidi streams
azalia_attach: resetting
azalia_attach: reset counter = 5000
azalia_attach: reset counter = 4991
azalia0: found a codec at #0
azalia0: found a codec at #1
ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci1 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 EC Ultra rev. A1 (0x2): irq 11
msk0 at mskc0 port A: Ethernet address 00:17:42:3d:72:02
ukphy0 at msk0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02)
pci2 at ppb1 bus 5
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02)
wpi0: interrupting at irq 11
, JPN, address 00:1b:77:0c:6f:4a
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: interrupting at irq 11
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
pci3 at ppb2 bus 8
pci3: i/o space, memory space enabled
cbb0 at pci3 dev 3 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0x8d)
Ricoh product 0x0822 (SD Host Controller system, revision 0x13) at pci3 dev 3 function 1 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02)
ichsmb0: interrupting at irq 11
iic0 at ichsmb0: I2C bus
iic0: devices at 0x19 0x44
isa0 at pcib0
com0 at isa0 port 0x220-0x227 irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia_init_corb: CORB allocation succeeded.
azalia_init_corb: CORBWP=0; size=256
azalia_init_rirb: RIRB allocation succeeded.
azalia_init_rirb: RIRBRP=0, size=256
azalia0: information of codec[0] follows:
azalia_codec_init_vtbl: vid=83847616 subid=13b410cf
azalia0: codec[0]: 0x8384/0x7616 (rev. 2.1)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia_codec_init: nidstart=1 #functions=1
azalia_codec_init: FTYPE result = 0x00000101
azalia_codec_init: There are 35 widgets in the audio function.
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    inamp: mute=0 size=5 steps=14 offset=0
azalia0:    outamp: mute=1 size=2 steps=127 offset=127
azalia0: dac02 wcap=d0c05<LRSWAP,POWER,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    outamp: mute=1 size=2 steps=127 offset=127
azalia0: dac03 wcap=d0c05<LRSWAP,POWER,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    outamp: mute=1 size=2 steps=127 offset=127
azalia0: dac04 wcap=d0c05<LRSWAP,POWER,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    outamp: mute=1 size=2 steps=127 offset=127
azalia0: dac05 wcap=d0c05<LRSWAP,POWER,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    outamp: mute=1 size=2 steps=127 offset=127
azalia0: widget06 wcap=fd0c05<LRSWAP,POWER,OUTAMP,STEREO>
azalia0:    outamp: mute=1 size=2 steps=127 offset=127
azalia0: adc07 wcap=1d0541<POWER,CONNLIST,PROC,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    connections=0x1b; selected=0x1b
azalia0: adc08 wcap=1d0541<POWER,CONNLIST,PROC,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    connections=0x1c; selected=0x1c
azalia0: adc09 wcap=1d0541<POWER,CONNLIST,PROC,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    connections=0x1d; selected=0x1d
azalia0: black0a wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=headphones color=black assoc=6 seq=0 cap=173f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x2,0x3; selected=0x2
azalia0: unknown0b wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=speaker color=unknown assoc=1 seq=0 cap=173f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x2,0x3; selected=0x2
azalia0: black0c wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=mic color=black assoc=5 seq=0 cap=1737<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x3; selected=0x3
azalia0: unknown0d wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=173f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x2; selected=0x2
azalia0: unknown0e wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=1737<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x4; selected=0x4
azalia0: unknown0f wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=1737<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x5; selected=0x5
azalia0: unknown10 wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=37<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x4; selected=0x4
azalia0: unknown11 wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=37<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x3; selected=0x3
azalia0: unknown12 wcap=400001<STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=20<INPUT>
azalia0: unknown13 wcap=400001<STEREO>
azalia0:    pin config; device=mic color=unknown assoc=2 seq=0 cap=20<INPUT>
azalia0: unknown14 wcap=400001<STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=20<INPUT>
azalia0: sel15 wcap=30010d<CONNLIST,AMPOV,OUTAMP,STEREO>
azalia0:    connections=0xe,0x12,0xf,0xb,0xc,0xd,0xa,0x10,0x11; selected=0xe
azalia0:    outamp: mute=0 size=39 steps=4 offset=0
azalia0: sel16 wcap=30010d<CONNLIST,AMPOV,OUTAMP,STEREO>
azalia0:    connections=0xe,0x12,0xf,0xb,0xc,0xd,0xa,0x10,0x11; selected=0xe
azalia0:    outamp: mute=0 size=39 steps=4 offset=0
azalia0: sel17 wcap=30010d<CONNLIST,AMPOV,OUTAMP,STEREO>
azalia0:    connections=0xe,0x12,0xf,0xb,0xc,0xd,0xa,0x10,0x11; selected=0xe
azalia0:    outamp: mute=0 size=39 steps=4 offset=0
azalia0: sel18 wcap=300103<CONNLIST,INAMP,STEREO>
azalia0:    connections=0x15; selected=0x15
azalia0:    inamp: mute=0 size=5 steps=14 offset=0
azalia0: sel19 wcap=300103<CONNLIST,INAMP,STEREO>
azalia0:    connections=0x16; selected=0x16
azalia0:    inamp: mute=0 size=5 steps=14 offset=0
azalia0: sel1a wcap=300103<CONNLIST,INAMP,STEREO>
azalia0:    connections=0x17; selected=0x17
azalia0:    inamp: mute=0 size=5 steps=14 offset=0
azalia0: sel1b wcap=30090d<LRSWAP,CONNLIST,AMPOV,OUTAMP,STEREO>
azalia0:    connections=0x18,0x13,0x14; selected=0x18
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: sel1c wcap=30090d<LRSWAP,CONNLIST,AMPOV,OUTAMP,STEREO>
azalia0:    connections=0x19,0x13,0x14; selected=0x19
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: sel1d wcap=30090d<LRSWAP,CONNLIST,AMPOV,OUTAMP,STEREO>
azalia0:    connections=0x1a,0x13,0x14; selected=0x1a
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: dac1e wcap=40211<DIGITAL,FORMATOV,STEREO>
azalia0:    encodings=5<AC3,PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: widget1f wcap=f30201<DIGITAL,STEREO>
azalia0: adc20 wcap=140311<DIGITAL,CONNLIST,FORMATOV,STEREO>
azalia0:    encodings=5<AC3,PCM>
azalia0:    PCM formats=e0160<24bit,20bit,16bit,96kHz,48kHz,44.1kHz>
azalia0:    connections=0x22; selected=0x22
azalia0: unknown21 wcap=400301<DIGITAL,CONNLIST,STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=10<OUTPUT>
azalia0:    connections=0x1e,0x1f,0x1b,0x1c,0x1d; selected=0x1e
azalia0: unknown22 wcap=430681<POWER,DIGITAL,UNSOL,STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=15 seq=0 cap=10024<EAPD,INPUT,PRESENCE>
azalia0: beep23 wcap=70000c<AMPOV,OUTAMP>
azalia0:    outamp: mute=0 size=23 steps=3 offset=3
azalia0: volume24 wcap=600000
azalia0:    delta=1 steps=127
generic_codec_find_dac: DAC: nid=0x2 index=2
generic_codec_find_dac: DAC path: nid=0xb index=11
generic_codec_add_dacgroup: assoc=1 seq=0 ==> g=0 n=0
generic_codec_find_dac: DAC: nid=0x3 index=3
generic_codec_find_dac: DAC path: nid=0xc index=12
generic_codec_add_dacgroup: assoc=5 seq=0 ==> g=1 n=0
generic_codec_find_dac: DAC: nid=0x2 index=2
generic_codec_find_dac: DAC path: nid=0xa index=10
generic_codec_add_dacgroup: assoc=6 seq=0 ==> g=2 n=0
generic_codec_init_dacgroup: find non-connected DACs
azalia_codec_init: dacgroup[0]: 02
azalia_codec_init: dacgroup[1]: 03
azalia_codec_init: dacgroup[2]: 04
azalia_codec_init: dacgroup[3]: 05
azalia_codec_init: dacgroup[4]: 1e
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
generic_mixer_init: register classes
generic_mixer_default: unmute
generic_mixer_default: process bidirectional pins
generic_mixer_default: set volume
azalia0: information of codec[1] follows:
azalia_codec_init_vtbl: vid=11c11040 subid=13b410cf
azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0)
azalia0: codec[1]: High Definition Audio rev. 1.0
azalia_codec_init: nidstart=1 #functions=1
azalia_codec_init: FTYPE result = 0x00000102
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
azalia0: using the #0 codec
audio0 at azalia0: full duplex, independent
azalia_round_blocksize: resultant block size = 9600
azalia_round_blocksize: resultant block size = 9600
ugen0 at uhub2 port 1
ugen0: AuthenTec Fingerprint Sensor, rev 1.10/6.21, addr 2
wd0 at atabus0 drive 0: <TOSHIBA MK6006GAH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
ubt0 at uhub2 port 2
ubt0: vendor 0x0c24 product 0x000f, rev 2.00/19.15, addr 3
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


*** output of mixerctl -av ***

inputs.dac02.mute=off  [ off on ]
inputs.dac02=255,255  delta=2
inputs.dac02.lrswap=off  [ off on ]
inputs.dac03.mute=off  [ off on ]
inputs.dac03=126,126  delta=2
inputs.dac03.lrswap=off  [ off on ]
inputs.dac04.mute=off  [ off on ]
inputs.dac04=126,126  delta=2
inputs.dac04.lrswap=off  [ off on ]
inputs.dac05.mute=off  [ off on ]
inputs.dac05=126,126  delta=2
inputs.dac05.lrswap=off  [ off on ]
inputs.widget06.mute=off  [ off on ]
inputs.widget06=126,126  delta=2
inputs.widget06.lrswap=off  [ off on ]
outputs.black0a.source=dac02  [ dac02 dac03 ]
outputs.black0a.dir=output  [ input output ]
outputs.black0a.boost=off  [ off on ]
outputs.unknown0b.sourc=dac02  [ dac02 dac03 ]
outputs.unknown0b.dir=output  [ input output ]
outputs.unknown0b.boost=off  [ off on ]
outputs.black0c.dir=output  [ input output ]
outputs.unknown0d.dir=output  [ input output ]
outputs.unknown0d.boost=off  [ off on ]
outputs.unknown0e.dir=output  [ input output ]
outputs.unknown0f.dir=output  [ input output ]
outputs.unknown10.dir=output  [ input output ]
outputs.unknown11.dir=output  [ input output ]
inputs.sel15.source=unknown0e  [ unknown0e unknown12 unknown0f unknown0b black0c unknown0d black0a unknown10 unknown11 ]
outputs.sel15=63,63  delta=63
inputs.sel16.source=unknown0e  [ unknown0e unknown12 unknown0f unknown0b black0c unknown0d black0a unknown10 unknown11 ]
outputs.sel16=63,63  delta=63
inputs.sel17.source=unknown0e  [ unknown0e unknown12 unknown0f unknown0b black0c unknown0d black0a unknown10 unknown11 ]
outputs.sel17=63,63  delta=63
inputs.sel18.sel15=109,109  delta=18
inputs.sel19.sel16=109,109  delta=18
inputs.sel1a.sel17=109,109  delta=18
inputs.sel1b.source=sel18  [ sel18 unknown13 unknown14 ]
outputs.sel1b.mute=off  [ off on ]
inputs.sel1b.lrswap=off  [ off on ]
inputs.sel1c.source=sel19  [ sel19 unknown13 unknown14 ]
outputs.sel1c.mute=off  [ off on ]
inputs.sel1c.lrswap=off  [ off on ]
inputs.sel1d.source=sel1a  [ sel1a unknown13 unknown14 ]
outputs.sel1d.mute=off  [ off on ]
inputs.sel1d.lrswap=off  [ off on ]
outputs.unknown21.sourc=dac1e  [ dac1e widget1f sel1b sel1c sel1d ]
outputs.unknown22.eapd=off  [ off on ]
inputs.beep23=85  delta=85
outputs.volume24=255  delta=2
playback.mode=02  [ 02 03 04 05 1e ]
record.mode=07  [ 07 08 09 20 ]


*** my /etc/mixerctl.conf ***

outputs.volume24=200
inputs.dac02=255,255


>How-To-Repeat:
plug headphones on Fujitsu FMVLP70WN
>Fix:
I have no idea.

>Release-Note:

>Audit-Trail:

State-Changed-From-To: open->feedback
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Mon, 07 Sep 2009 19:02:26 +0000
State-Changed-Why:
Can you try the new hdaudio(4) driver in -current, that replaces azalia?


From: Ryo ONODERA <ryo_on@yk.rim.or.jp>
To: gnats-bugs@NetBSD.org, dholland@NetBSD.org
Cc: kern-bug-people@netbsd.org, netbsd-bugs@netbsd.org,
 gnats-admin@netbsd.org
Subject: Re: kern/36883 (azalia device doesn't sense plugging of the
 headphones.)
Date: Sun, 13 Sep 2009 00:50:19 +0900 (JST)

 ----Next_Part(Sun_Sep_13_00_50_19_2009_116)--
 Content-Type: Text/Plain; charset=us-ascii
 Content-Transfer-Encoding: 7bit

 Hi

 With the new hdaudio, the internal speaker don't work (no sound),
 but I can use headphones without use of mixerctl.

 I attach dmesg with HDAUDIO_DEBUG and HDAUDIO_AFG_DEBUG options, and output of 'mixerctl -av'.
 I have no /etc/mixerctl.conf now.


 ----Next_Part(Sun_Sep_13_00_50_19_2009_116)--
 Content-Type: Text/Plain; charset=us-ascii
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline; filename="dmesg-hdaudio.txt"

 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

 NetBSD 5.99.16 (BRIGHTGIRL2) #4: Fri Sep 11 23:56:48 JST 2009
 	root@hydrogen.elements.tetera.org:/usr/obj/sys/arch/i386/compile/BRIGHTGIRL2
 total memory = 1013 MB
 avail memory = 985 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 FUJITSU FMVLP70WN ( )
 mainbus0 (root)
 cpu0 at mainbus0: Intel 686-class, 1197MHz, id 0x6ec
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x27a0 (rev. 0x03)
 agp0 at pchb0: detected 7932k stolen memory
 agp0: aperture at 0xe0000000, size 0x10000000
 vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 i915drm0 at vga1: Intel i945GM
 i915drm0: AGP at 0xe0000000 256MB
 i915drm0: Initialized i915 1.6.0 20080730
 vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio0: interrupting at irq 11
 hdaudio0: High Definition Audio version 1.0
 hdaudio0: OSS 4 ISS 4 BSS 0 SDO 0 64-bit
 hdaudio0: using 1024 byte CORB (cap 4)
 hdaudio0: using 2048 byte RIRB (cap 4)
 hdaudio0: Codec00: 8384:7616 HDA 1.0 rev 2 stepping 1
 hdafg0 at hdaudio0 vendor 0x8384 product 0x7616 nid 0x01 (firmware configuration)
 hdafg0: parsing widgets
 hdafg0: afg start 02 end 25 nwidgets 35
 hdafg0: powering up widgets
 hdafg0: afg widgets 0xcb867000-0xcb869530
 hdafg0: parsing controls
 hdafg0: disabling non-audio devices
 hdafg0: disabling useless devices
 hdafg0: parsing associations
 hdafg0:   count present associations
 hdafg0:   maxassocs 3
 hdafg0:   allocating memory
 hdafg0:   scan associations, skipping as=0
 hdafg0:   all done
 hdafg0: building tree
 hdafg0: disabling unassociated pins
 hdafg0: disabling unselected pins
 hdafg0: disabling useless devices
 hdafg0: disabling cross-associated pins
 hdafg0: disabling useless devices
 hdafg0: assigning mixer names to sound sources
 hdafg0: assigning mixers to device tree
 hdafg0: preparing pin controls
 hdafg0: commiting settings
 hdafg0: setup jack sensing
 hdafg0: building mixer controls
 hdafg0: ADC0:07, Analog Mic In: Fixed Function (Unknown, 13)
 hdafg0: ADC1:08, Analog Mic In: Jack (Black, 0C)
 hdafg0: DAC2:02, Analog HP Out: Jack (Black, 0A)
 hdafg0: configuring encodings
 hdafg0: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32
 hdafg0: reserving streams
 hdafg0: connecting streams
 hdafg0: attaching audio device
 audio0 at hdafg0: full duplex, independent
 hdaudio0: Codec01: 11C1:1040 HDA 1.0 rev 2 stepping 0
 hdvsmfg at hdaudio0 vendor 0x11C1 product 0x1040 nid 0x01 not configured
 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
 pci1 at ppb0 bus 2
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 mskc0 at pci1 dev 0 function 0mskc0: interrupt moderation is 0 us
 , Yukon-2 EC Ultra rev. A1 (0x2): irq 11
 msk0 at mskc0 port A: Ethernet address 00:17:42:3d:72:02
 ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x000b, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 ppb1 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
 pci2 at ppb1 bus 5
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 wpi0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4222 (rev. 0x02)
 wpi0: interrupting at irq 11
 wpi0: JPN, address 00:1b:77:0c:6f:4a
 wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
 uhci0: interrupting at irq 11
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
 uhci1: interrupting at irq 11
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
 uhci2: interrupting at irq 11
 usb2 at uhci2: USB revision 1.0
 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
 uhci3: interrupting at irq 11
 usb3 at uhci3: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
 ehci0: interrupting at irq 11
 ehci0: BIOS refuses to give up ownership, using force
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 usb4 at ehci0: USB revision 2.0
 ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
 pci3 at ppb2 bus 8
 pci3: i/o space, memory space enabled
 cbb0 at pci3 dev 3 function 0: vendor 0x1180 product 0x0476 (rev. 0x8d)
 sdhc0 at pci3 dev 3 function 1: vendor 0x1180 product 0x0822 (rev. 0x13)
 sdhc0: interrupting at irq 11
 sdmmc0 at sdhc0
 cbb0: cacheline 0x0 lattimer 0x40
 cbb0: bhlc 0x824000
 cbb0: interrupting at irq 11
 cardslot0 at cbb0
 cardbus0 at cardslot0: bus 9
 pcmcia0 at cardslot0
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b9 (rev. 0x02)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at irq 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel ignored (disabled)
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
 ichsmb0: interrupting at irq 11
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 com0 at isa0 port 0x220-0x227 irq 4: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 attimer0 at isa0 port 0x40-0x43
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 npx0 at isa0 port 0xf0-0xff
 npx0: reported by CPUID; using exception 16
 attimer0: attached to pcppi0
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 1197078390 Hz quality 3000
 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub4: 8 ports with 8 removable, self powered
 ugen0 at uhub2 port 1
 ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.21, addr 2
 wd0 at atabus0 drive 0: <TOSHIBA MK6006GAH>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 ubt0 at uhub2 port 2
 ubt0: vendor 0x0c24 product 0x000f, rev 2.00/19.15, addr 3
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 i915drm0: interrupting at irq 11

 ----Next_Part(Sun_Sep_13_00_50_19_2009_116)--
 Content-Type: Text/Plain; charset=us-ascii
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline; filename="mixerctl-av.txt"

 outputs.master=254,254 volume delta=2
 inputs.dac=254,254 volume delta=2
 inputs.beep=255,255 volume delta=64
 inputs.reclvl=0,0 volume delta=51
 record.monitor=0,0 volume delta=256
 outputs.dacsel=DAC02  { DAC02 }
 record.source=ADC00,ADC01  { ADC00 ADC01 }


 ----Next_Part(Sun_Sep_13_00_50_19_2009_116)----


From: Ryo ONODERA <ryo_on@yk.rim.or.jp>
To: gnats-bugs@NetBSD.org, dholland@NetBSD.org
Cc: kern-bug-people@netbsd.org, netbsd-bugs@netbsd.org,
 gnats-admin@netbsd.org
Subject: Re: kern/36883 (azalia device doesn't sense plugging of the
 headphones.)
Date: Tue, 22 Sep 2009 08:01:52 +0900 (JST)

 Gnats did not file my e-mail.

 From: Ryo ONODERA <ryo_on@yk.rim.or.jp>
 Subject: Re: kern/36883 (azalia device doesn't sense plugging of the headphones.)
 Date: Sun, 13 Sep 2009 00:50:19 +0900 (JST)

 > Hi
 > 
 > With the new hdaudio, the internal speaker don't work (no sound),
 > but I can use headphones without use of mixerctl.
 > 
 > I attach dmesg with HDAUDIO_DEBUG and HDAUDIO_AFG_DEBUG options, and output of 'mixerctl -av'.
 > I have no /etc/mixerctl.conf now.
 > 


State-Changed-From-To: feedback->open
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Mon, 19 Oct 2009 01:19:35 +0000
State-Changed-Why:
Feedback received.


Responsible-Changed-From-To: kern-bug-people->nat
Responsible-Changed-By: nat@NetBSD.org
Responsible-Changed-When: Fri, 27 Oct 2017 23:35:06 +0000
Responsible-Changed-Why:
Take.


Responsible-Changed-From-To: nat->kern-bug-people
Responsible-Changed-By: nat@NetBSD.org
Responsible-Changed-When: Wed, 08 May 2019 21:49:10 +0000
Responsible-Changed-Why:


State-Changed-From-To: open->feedback
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Mon, 27 May 2019 22:15:44 +0000
State-Changed-Why:
Does this work nowadays with hdaudio?


State-Changed-From-To: feedback->closed
State-Changed-By: jmcneill@NetBSD.org
State-Changed-When: Sun, 16 Feb 2020 10:47:40 +0000
State-Changed-Why:
feedback timeout


>Unformatted:

Home	PR Database Search