NetBSD Problem Report #38220

From martin@duskware.de  Tue Mar 11 14:42:28 2008
Return-Path: <martin@duskware.de>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
	by narn.NetBSD.org (Postfix) with ESMTP id 8023F63B8E3
	for <gnats-bugs@gnats.netbsd.org>; Tue, 11 Mar 2008 14:42:28 +0000 (UTC)
Message-Id: <20080311130045.4902C63B8E3@narn.NetBSD.org>
Date: Tue, 11 Mar 2008 13:00:45 +0000 (UTC)
From: pettai@nordu.net
Reply-To: pettai@nordu.net
To: netbsd-bugs-owner@NetBSD.org
Subject: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly on HP proliant DL380 G3 (3.20 GHz uni)
X-Send-Pr-Version: www-1.0

>Number:         38220
>Category:       port-i386
>Synopsis:       NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly on HP proliant DL380 G3 (3.20 GHz uni)
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    port-i386-maintainer
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Mar 11 14:45:00 +0000 2008
>Closed-Date:    Sun Dec 16 17:48:34 +0000 2012
>Last-Modified:  Sun Dec 16 17:48:34 +0000 2012
>Originator:     Fredrik Pettai
>Release:        NetBSD 4.0 RELEASE
>Organization:
NORDUnet A/S
>Environment:
N/A

>Description:
NetBSD 4.0 RELEASE (INSTALL_LARGE) installation CD does not boot on a HP proliant DL380 G3 with a uni-processor 3.20 GHz intel XEON (HT).

I checked the BIOS version, and it's the latest version available (B29).
I also tried to disable HT in the BIOS, but that didn't help...

Linux seems to work fine on the server. I have a previous installation of Gentoo running on this box.

Full console output from boot-up of the NetBSD 4.0 installer CD:

>> NetBSD/i386 BIOS Boot, Revision 3.3
>> (builds@wb34, Sat Dec 15 23:17:28 PST 2007)
>> Memory: 637/2096128 k
> boot
booting cd0a:netbsd
4142492+5319748+182452 [285328+269759]=0x9bc09c
kenter: 0x00001000
acpi: wakecode is installed at 0x1000, size=376
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (INSTALL_LARGE) #0: Sun Dec 16 01:44:06 PST 2007
      builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src
/sys/arch/i386/compile/INSTALL_LAR
GE
total memory = 2047 MB
rbus: rbus_min_start set to 0x80000000
avail memory = 2002 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
cpu0 at mainbus0: apid 6 (application processor)
cpu0: not started
cpu1 at mainbus0: apid 7 (application processor)
cpu1: not started
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 4 (I/O APIC)
ioapic2: pa 0xfec02000, version 11, 16 pins
ioapic3 at mainbus0 apid 5 (I/O APIC)
ioapic3: pa 0xfec03000, version 11, 16 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 32-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0A06 [Generic Container Device] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
ACPI Object Type 'Thermal' (0x0d) at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1166 product 0x0014 (rev. 0x33)
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1166 product 0x0014 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1166 product 0x0014 (rev. 0x00)
vga1 at pci0 dev 3 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
vendor 0x0e11 product 0xb203 (miscellaneous system, revision 0x01) at pci0 dev 4 function 0 not configured
vendor 0x0e11 product 0xb204 (miscellaneous system, revision 0x01) at pci0 dev 4 function 2 not configured
pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x1166 product 0x0201 (rev. 0x93)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks CSB5 IDE Controller (rev. 0x93)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: vendor 0x1166 product 0x0220 (rev. 0x05)
ohci0: interrupting at ioapic0 pin 7 (irq 7)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb3 at pci0 dev 15 function 3
pchb3: vendor 0x1166 product 0x0225 (rev. 0x00)
pchb4 at pci0 dev 16 function 0
pchb4: vendor 0x1166 product 0x0101 (rev. 0x05)
pci1 at pchb4 bus 3
pci1: i/o space, memory space enabled
wm0 at pci1 dev 1 function 0: Intel i82545GM 1000BASE-X Ethernet, rev. 4
wm0: interrupting at ioapic1 pin 4 (irq 15)
wm0: Ethernet address 00:04:23:9f:5b:59
wm0: 1000baseSX, 1000baseSX-FDX, auto
pchb5 at pci0 dev 16 function 2
pchb5: vendor 0x1166 product 0x0101 (rev. 0x05)
pci2 at pchb5 bus 6
pci2: i/o space, memory space enabled
vendor 0x0e11 product 0xa0f7 (PCI Hot-Plug system, revision 0x14) at pci2 dev 30 function 0 not configured
pchb6 at pci0 dev 17 function 0
pchb6: vendor 0x1166 product 0x0101 (rev. 0x05)
pci3 at pchb6 bus 1
pci3: i/o space, memory space enabled
ciss0 at pci3 dev 3 function 0: Compaq Smart Array 5i
ciss0: interrupting at ioapic1 pin 14 (irq 10)
ciss0: 2 LDs, HW rev 1, FW 2.56/2.56
scsibus0 at ciss0: 2 targets, 8 luns per target
pchb7 at pci0 dev 17 function 2
pchb7: vendor 0x1166 product 0x0101 (rev. 0x05)
pci4 at pchb7 bus 2
pci4: i/o space, memory space enabled
bge0 at pci4 dev 1 function 0: Broadcom BCM5703X Gigabit Ethernet
bge0: interrupting at ioapic1 pin 13 (irq 11)
bge0: ASIC BCM5703 A2 (0x1002), Ethernet address 00:0e:7f:ae:5c:14
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1 at pci4 dev 2 function 0: Broadcom BCM5703X Gigabit Ethernet
intr_establish: pic ioapic1 pin 15: can't share type 2 with 3
bge1: couldn't establish interrupt at ioapic1 pin 15 (irq 15)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
ioapic3: enabling
timecounter: Timecounter "TSC" frequency 3189533080 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
>How-To-Repeat:
Just put in the NetBSD 4.0 RELEASE installation CD and to boot it.



>Fix:

>Release-Note:

>Audit-Trail:
From: "Peter O'Kane" <peter.okane@it.nuigalway.ie>
To: gnats-bugs@NetBSD.org, port-i386-maintainer@NetBSD.org,
        gnats-admin@NetBSD.org, netbsd-bugs@NetBSD.org
Cc: 
Subject: Re: port-i386/38220: NetBSD 4.0 REL (LARGE_INSTALL) won't boot
 properly on HP proliant DL380 G3 (3.20 GHz uni)
Date: Tue, 11 Mar 2008 16:22:38 +0000

 Uniprocessor kernel also fails on Fujitsu-Siemens PRIMERGY RX300 with 
 either one or two processors installed.

 Looks like the uniprocessor kernels assume that the boot processor is at 
 apic id 0 and wire the interrupts accordingly. On the RX300 a 
 multiprocessor kernel boots correctly.


 --On 11 March 2008 14:45 +0000 pettai@nordu.net wrote:

 >> Number:         38220
 >> Category:       port-i386
 >> Synopsis:       NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly on HP
 >> proliant DL380 G3 (3.20 GHz uni) Confidential:   no
 >> Severity:       critical
 >> Priority:       medium
 >> Responsible:    port-i386-maintainer
 >> State:          open
 >> Class:          sw-bug
 >> Submitter-Id:   net
 >> Arrival-Date:   Tue Mar 11 14:45:00 +0000 2008
 >> Originator:     Fredrik Pettai
 >> Release:        NetBSD 4.0 RELEASE
 >> Organization:
 > NORDUnet A/S
 >> Environment:
 > N/A
 >
 >> Description:
 > NetBSD 4.0 RELEASE (INSTALL_LARGE) installation CD does not boot on a HP
 > proliant DL380 G3 with a uni-processor 3.20 GHz intel XEON (HT).
 >
 > I checked the BIOS version, and it's the latest version available (B29).
 > I also tried to disable HT in the BIOS, but that didn't help...
 >
 > Linux seems to work fine on the server. I have a previous installation of
 > Gentoo running on this box.
 >
 > Full console output from boot-up of the NetBSD 4.0 installer CD:
 >
 >>> NetBSD/i386 BIOS Boot, Revision 3.3
 >>> (builds@wb34, Sat Dec 15 23:17:28 PST 2007)
 >>> Memory: 637/2096128 k
 >> boot
 > booting cd0a:netbsd
 > 4142492+5319748+182452 [285328+269759]=0x9bc09c
 > kenter: 0x00001000
 > acpi: wakecode is installed at 0x1000, size=376
 > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
 >     2006, 2007
 >     The NetBSD Foundation, Inc.  All rights reserved.
 > Copyright (c) 1982, 1986, 1989, 1991, 1993
 >     The Regents of the University of California.  All rights reserved.
 >
 > NetBSD 4.0 (INSTALL_LARGE) #0: Sun Dec 16 01:44:06 PST 2007
 >
 > builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/hom
 > e/builds/ab/netbsd-4-0-RELEASE/src /sys/arch/i386/compile/INSTALL_LAR
 > GE
 > total memory = 2047 MB
 > rbus: rbus_min_start set to 0x80000000
 > avail memory = 2002 MB
 > timecounter: Timecounters tick every 10.000 msec
 > timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 > BIOS32 rev. 0 found at 0xf0000
 > mainbus0 (root)
 > cpu0 at mainbus0: apid 6 (application processor)
 > cpu0: not started
 > cpu1 at mainbus0: apid 7 (application processor)
 > cpu1: not started
 > ioapic0 at mainbus0 apid 2 (I/O APIC)
 > ioapic0: pa 0xfec00000, version 11, 16 pins
 > ioapic1 at mainbus0 apid 3 (I/O APIC)
 > ioapic1: pa 0xfec01000, version 11, 16 pins
 > ioapic2 at mainbus0 apid 4 (I/O APIC)
 > ioapic2: pa 0xfec02000, version 11, 16 pins
 > ioapic3 at mainbus0 apid 5 (I/O APIC)
 > ioapic3: pa 0xfec03000, version 11, 16 pins
 > acpi0 at mainbus0: Advanced Configuration and Power Interface
 > acpi0: fixed-feature power button present
 > timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
 > ACPI-Safe 32-bit timer
 > ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 > ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 > ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 > ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 > ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 > ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 > ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 > ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 > PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
 > PNP0C02 [Plug and Play motherboard register resources] at acpi0 not
 > configured PNP0000 [AT Interrupt Controller] at acpi0 not configured
 > PNP0100 [AT Timer] at acpi0 not configured
 > PNP0200 [AT DMA Controller] at acpi0 not configured
 > PNP0800 [AT-style speaker sound] at acpi0 not configured
 > PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not
 > configured PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
 > PNP0A06 [Generic Container Device] at acpi0 not configured
 > PNP0501 [16550A-compatible COM port] at acpi0 not configured
 > PNP0700 [PC standard floppy disk controller] at acpi0 not configured
 > PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
 > PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
 > PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
 > PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
 > PNP0C0F [PCI interrupt link device] at acpi0 not configured
 > PNP0C0F [PCI interrupt link device] at acpi0 not configured
 > PNP0C0F [PCI interrupt link device] at acpi0 not configured
 > PNP0C0F [PCI interrupt link device] at acpi0 not configured
 > PNP0C0F [PCI interrupt link device] at acpi0 not configured
 > PNP0C0F [PCI interrupt link device] at acpi0 not configured
 > PNP0C0F [PCI interrupt link device] at acpi0 not configured
 > PNP0C0F [PCI interrupt link device] at acpi0 not configured
 > ACPI Object Type 'Thermal' (0x0d) at acpi0 not configured
 > pci0 at mainbus0 bus 0: configuration mode 1
 > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 > pchb0 at pci0 dev 0 function 0
 > pchb0: vendor 0x1166 product 0x0014 (rev. 0x33)
 > pchb1 at pci0 dev 0 function 1
 > pchb1: vendor 0x1166 product 0x0014 (rev. 0x00)
 > pchb2 at pci0 dev 0 function 2
 > pchb2: vendor 0x1166 product 0x0014 (rev. 0x00)
 > vga1 at pci0 dev 3 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
 > wsdisplay0 at vga1 kbdmux 1
 > wsmux1: connecting to wsdisplay0
 > vendor 0x0e11 product 0xb203 (miscellaneous system, revision 0x01) at
 > pci0 dev 4 function 0 not configured vendor 0x0e11 product 0xb204
 > (miscellaneous system, revision 0x01) at pci0 dev 4 function 2 not
 > configured pcib0 at pci0 dev 15 function 0
 > pcib0: vendor 0x1166 product 0x0201 (rev. 0x93)
 > rccide0 at pci0 dev 15 function 1
 > rccide0: ServerWorks CSB5 IDE Controller (rev. 0x93)
 > rccide0: bus-master DMA support present
 > rccide0: primary channel configured to compatibility mode
 > rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
 > atabus0 at rccide0 channel 0
 > rccide0: secondary channel configured to compatibility mode
 > rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 > atabus1 at rccide0 channel 1
 > ohci0 at pci0 dev 15 function 2: vendor 0x1166 product 0x0220 (rev. 0x05)
 > ohci0: interrupting at ioapic0 pin 7 (irq 7)
 > ohci0: OHCI version 1.0, legacy support
 > usb0 at ohci0: USB revision 1.0
 > uhub0 at usb0
 > uhub0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 > uhub0: 4 ports with 4 removable, self powered
 > pchb3 at pci0 dev 15 function 3
 > pchb3: vendor 0x1166 product 0x0225 (rev. 0x00)
 > pchb4 at pci0 dev 16 function 0
 > pchb4: vendor 0x1166 product 0x0101 (rev. 0x05)
 > pci1 at pchb4 bus 3
 > pci1: i/o space, memory space enabled
 > wm0 at pci1 dev 1 function 0: Intel i82545GM 1000BASE-X Ethernet, rev. 4
 > wm0: interrupting at ioapic1 pin 4 (irq 15)
 > wm0: Ethernet address 00:04:23:9f:5b:59
 > wm0: 1000baseSX, 1000baseSX-FDX, auto
 > pchb5 at pci0 dev 16 function 2
 > pchb5: vendor 0x1166 product 0x0101 (rev. 0x05)
 > pci2 at pchb5 bus 6
 > pci2: i/o space, memory space enabled
 > vendor 0x0e11 product 0xa0f7 (PCI Hot-Plug system, revision 0x14) at pci2
 > dev 30 function 0 not configured pchb6 at pci0 dev 17 function 0
 > pchb6: vendor 0x1166 product 0x0101 (rev. 0x05)
 > pci3 at pchb6 bus 1
 > pci3: i/o space, memory space enabled
 > ciss0 at pci3 dev 3 function 0: Compaq Smart Array 5i
 > ciss0: interrupting at ioapic1 pin 14 (irq 10)
 > ciss0: 2 LDs, HW rev 1, FW 2.56/2.56
 > scsibus0 at ciss0: 2 targets, 8 luns per target
 > pchb7 at pci0 dev 17 function 2
 > pchb7: vendor 0x1166 product 0x0101 (rev. 0x05)
 > pci4 at pchb7 bus 2
 > pci4: i/o space, memory space enabled
 > bge0 at pci4 dev 1 function 0: Broadcom BCM5703X Gigabit Ethernet
 > bge0: interrupting at ioapic1 pin 13 (irq 11)
 > bge0: ASIC BCM5703 A2 (0x1002), Ethernet address 00:0e:7f:ae:5c:14
 > brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
 > 1000baseT-FDX, auto bge1 at pci4 dev 2 function 0: Broadcom BCM5703X
 > Gigabit Ethernet intr_establish: pic ioapic1 pin 15: can't share type 2
 > with 3
 > bge1: couldn't establish interrupt at ioapic1 pin 15 (irq 15)
 > isa0 at pcib0
 > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 > com0: console
 > pckbc0 at isa0 port 0x60-0x64
 > pckbd0 at pckbc0 (kbd slot)
 > pckbc0: using irq 1 for kbd slot
 > wskbd0 at pckbd0 mux 1
 > wskbd0: connecting to wsdisplay0
 > isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 > npx0 at isa0 port 0xf0-0xff
 > fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 > isapnp0: no ISA Plug 'n Play devices found
 > ioapic0: enabling
 > ioapic1: enabling
 > ioapic2: enabling
 > ioapic3: enabling
 > timecounter: Timecounter "TSC" frequency 3189533080 Hz quality 800
 > timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 >> How-To-Repeat:
 > Just put in the NetBSD 4.0 RELEASE installation CD and to boot it.
 >
 >
 >
 >> Fix:
 >



 Peter O'Kane
 Chief Technical Officer                E-mail:peter.okane@it.nuigalway.ie
 Information Technology Department,      Voice: +353 91 492527
 National University of Ireland, Galway. Fax: +353 91 494501

From: Carl Brewer <carl@bl.echidna.id.au>
To: gnats-bugs@NetBSD.org, port-i386-maintainer@NetBSD.org,
        gnats-admin@NetBSD.org, netbsd-bugs@NetBSD.org
Cc: 
Subject: Re: port-i386/38220: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly
 on HP proliant DL380 G3 (3.20 GHz uni)
Date: Sat, 10 May 2008 17:33:17 +1000

 Has this been fixed at all in any more recent versions? (at all?)
 I have a proliant ML350 G3 that is showing the same symptom, boot 
 hanging at the same time.

 I'm downloading some newer ISO's to see if they fix it, but that's a bit 
 of a random brute-force approach!

 thanks

 Carl

From: "Jared D. McNeill" <jmcneill@invisible.ca>
To: Carl Brewer <carl@bl.echidna.id.au>
Cc: gnats-bugs@NetBSD.org, port-i386-maintainer@NetBSD.org, 
 gnats-admin@NetBSD.org, netbsd-bugs@NetBSD.org
Subject: Re: port-i386/38220: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly
 on HP proliant DL380 G3 (3.20 GHz uni)
Date: Sat, 10 May 2008 08:02:04 -0400

 Carl Brewer wrote:
 > 
 > Has this been fixed at all in any more recent versions? (at all?)
 > I have a proliant ML350 G3 that is showing the same symptom, boot 
 > hanging at the same time.
 > 
 > I'm downloading some newer ISO's to see if they fix it, but that's a bit 
 > of a random brute-force approach!

 I fixed a similar issue recently I think on a DL360 -- you might want to 
 give -current a try.

 Cheers,
 Jared

From: Carl Brewer <carl@bl.echidna.id.au>
To: "Jared D. McNeill" <jmcneill@invisible.ca>
Cc: gnats-bugs@NetBSD.org, port-i386-maintainer@NetBSD.org,
        gnats-admin@NetBSD.org, netbsd-bugs@NetBSD.org
Subject: Re: port-i386/38220: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly
 on HP proliant DL380 G3 (3.20 GHz uni)
Date: Sat, 10 May 2008 22:10:33 +1000

 Jared D. McNeill wrote:
 > Carl Brewer wrote:
 >>
 >> Has this been fixed at all in any more recent versions? (at all?)
 >> I have a proliant ML350 G3 that is showing the same symptom, boot 
 >> hanging at the same time.
 >>
 >> I'm downloading some newer ISO's to see if they fix it, but that's a 
 >> bit of a random brute-force approach!
 > 
 > I fixed a similar issue recently I think on a DL360 -- you might want to 
 > give -current a try.

 I'm trying to pull down a nightly build iso of 4-0 at the moment, should 
 I abort the download and grab -current instead?


 > 
 > Cheers,
 > Jared

From: "Jared D. McNeill" <jmcneill@invisible.ca>
To: Carl Brewer <carl@bl.echidna.id.au>
Cc: gnats-bugs@NetBSD.org, port-i386-maintainer@NetBSD.org, 
 gnats-admin@NetBSD.org, netbsd-bugs@NetBSD.org
Subject: Re: port-i386/38220: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly
 on HP proliant DL380 G3 (3.20 GHz uni)
Date: Sat, 10 May 2008 08:21:50 -0400

 Carl Brewer wrote:
 > Jared D. McNeill wrote:
 >> Carl Brewer wrote:
 >>>
 >>> Has this been fixed at all in any more recent versions? (at all?)
 >>> I have a proliant ML350 G3 that is showing the same symptom, boot 
 >>> hanging at the same time.
 >>>
 >>> I'm downloading some newer ISO's to see if they fix it, but that's a 
 >>> bit of a random brute-force approach!
 >>
 >> I fixed a similar issue recently I think on a DL360 -- you might want 
 >> to give -current a try.
 > 
 > I'm trying to pull down a nightly build iso of 4-0 at the moment, should 
 > I abort the download and grab -current instead?

 Yeah, the following should do the trick:

 http://ftp.netbsd.org/pub/NetBSD-daily/HEAD/200805080002Z/i386/installation/cdrom/boot.iso

 Cheers,
 Jared

From: Andrew Doran <ad@netbsd.org>
To: "Jared D. McNeill" <jmcneill@invisible.ca>
Cc: Carl Brewer <carl@bl.echidna.id.au>, gnats-bugs@NetBSD.org
Subject: Re: port-i386/38220: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly on HP proliant DL380 G3 (3.20 GHz uni)
Date: Sat, 10 May 2008 15:49:14 +0100

 On Sat, May 10, 2008 at 08:21:50AM -0400, Jared D. McNeill wrote:
 > Carl Brewer wrote:
 > >Jared D. McNeill wrote:
 > >>Carl Brewer wrote:
 > >>>
 > >>>Has this been fixed at all in any more recent versions? (at all?)
 > >>>I have a proliant ML350 G3 that is showing the same symptom, boot 
 > >>>hanging at the same time.
 > >>>
 > >>>I'm downloading some newer ISO's to see if they fix it, but that's a 
 > >>>bit of a random brute-force approach!
 > >>
 > >>I fixed a similar issue recently I think on a DL360 -- you might want 
 > >>to give -current a try.
 > >
 > >I'm trying to pull down a nightly build iso of 4-0 at the moment, should 
 > >I abort the download and grab -current instead?
 > 
 > Yeah, the following should do the trick:
 > 
 > http://ftp.netbsd.org/pub/NetBSD-daily/HEAD/200805080002Z/i386/installation/cdrom/boot.iso

 Agreed, it shouldn't be a problem on -current (hopefully). I guess the
 work-around for 4.0 is to run with an SMP kernel.

 Andrew

From: Carl Brewer <carl@bl.echidna.id.au>
To: Andrew Doran <ad@netbsd.org>
Cc: "Jared D. McNeill" <jmcneill@invisible.ca>, gnats-bugs@netbsd.org
Subject: Re: port-i386/38220: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly
 on HP proliant DL380 G3 (3.20 GHz uni)
Date: Tue, 13 May 2008 08:31:30 +1000

 Andrew Doran wrote:
 > On Sat, May 10, 2008 at 08:21:50AM -0400, Jared D. McNeill wrote:
 >> Carl Brewer wrote:
 >>> Jared D. McNeill wrote:
 >>>> Carl Brewer wrote:
 >>>>> Has this been fixed at all in any more recent versions? (at all?)
 >>>>> I have a proliant ML350 G3 that is showing the same symptom, boot 
 >>>>> hanging at the same time.
 >>>>>
 >>>>> I'm downloading some newer ISO's to see if they fix it, but that's a 
 >>>>> bit of a random brute-force approach!
 >>>> I fixed a similar issue recently I think on a DL360 -- you might want 
 >>>> to give -current a try.
 >>> I'm trying to pull down a nightly build iso of 4-0 at the moment, should 
 >>> I abort the download and grab -current instead?
 >> Yeah, the following should do the trick:
 >>
 >> http://ftp.netbsd.org/pub/NetBSD-daily/HEAD/200805080002Z/i386/installation/cdrom/boot.iso
 > 
 > Agreed, it shouldn't be a problem on -current (hopefully). I guess the
 > work-around for 4.0 is to run with an SMP kernel.

 It works fine with -current (apart from appallingly slow write 
 performance, but I think that's the proliant's HW RAID controller ...)




State-Changed-From-To: open->feedback
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Sat, 25 Jul 2009 05:57:39 +0000
State-Changed-Why:
Are you ok with using 5.0 for this or do we need to try to get 4.0 fixed?


From: Fredrik Pettai <pettai@nordu.net>
To: gnats-bugs@NetBSD.org
Cc: port-i386-maintainer@NetBSD.org,
 netbsd-bugs@NetBSD.org,
 gnats-admin@NetBSD.org,
 dholland@NetBSD.org
Subject: Re: port-i386/38220 (NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly on HP proliant DL380 G3 (3.20 GHz uni))
Date: Sat, 25 Jul 2009 22:19:23 +0200

 On Jul 25, 2009, at 7:57 AM, dholland@NetBSD.org wrote:
 > Synopsis: NetBSD 4.0 REL (LARGE_INSTALL) won't boot properly on HP  
 > proliant DL380 G3 (3.20 GHz uni)
 >
 > State-Changed-From-To: open->feedback
 > State-Changed-By: dholland@NetBSD.org
 > State-Changed-When: Sat, 25 Jul 2009 05:57:39 +0000
 > State-Changed-Why:
 > Are you ok with using 5.0 for this or do we need to try to get 4.0  
 > fixed?

 I have problems running NetBSD 5.0 in production since the (updated)  
 linux emulation together with veritas (now symantec?) netbackup  
 doesn't work completely. But since this machine had to make it into  
 production anyway, it now runs ubuntu linux, so it's no rush to fix it  
 to NetBSD 4.0 if time is available for that. But I guess you have  
 perhaps more important tasks to spend time on as well :)

 Unfortunately I can't test and confirm that it works on NetBSD 5.0 for  
 this machine/cpu type. But according to some earlier replies on this  
 PR, there was also a fujistu siemens machine (i believe) with the same  
 issue. Is NetBSD 5.0 confirmed to work on that one? Then I guess it's  
 fine to close the PR.

 Thanks,
 /P

State-Changed-From-To: feedback->open
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Sat, 25 Jul 2009 20:48:38 +0000
State-Changed-Why:
Let's leave it open then. Worst case is it hangs around until 4.0 is EOL'd...


State-Changed-From-To: open->closed
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Sun, 16 Dec 2012 17:48:34 +0000
State-Changed-Why:
Problem affected netbsd-4 only, and netbsd-4 is now EOL.


>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.