NetBSD Problem Report #42368

From www@NetBSD.org  Mon Nov 23 20:48:25 2009
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
	by www.NetBSD.org (Postfix) with ESMTP id BBB9B63C414
	for <gnats-bugs@gnats.netbsd.org>; Mon, 23 Nov 2009 20:48:25 +0000 (UTC)
Message-Id: <20091123204825.7F68963C411@www.NetBSD.org>
Date: Mon, 23 Nov 2009 20:48:25 +0000 (UTC)
From: kolaloka@netbsd.sk
Reply-To: kolaloka@netbsd.sk
To: gnats-bugs@NetBSD.org
Subject: keyboard does not work if famd is started from rc.conf, only works if famd is started from inetd
X-Send-Pr-Version: www-1.0

>Number:         42368
>Category:       pkg
>Synopsis:       keyboard does not work if famd is started from rc.conf, only works if famd is started from inetd
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    pkg-manager
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Nov 23 20:50:00 +0000 2009
>Last-Modified:  Mon Nov 23 23:10:03 +0000 2009
>Originator:     Petr Topiarz
>Release:        NetBSD 5.99.22 (GENERIC)
>Organization:
home
>Environment:
NetBSD  5.99.22 NetBSD 5.99.22 (GENERIC) #0: Thu Nov 19 05:46:23 UTC 2009  builds@b7.netbsd.org:/home/builds/ab/HEAD/i386/200911190000Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC i386

>Description:
On Lenovo S10e the keyboard does not work in gdm if famd is started from rc.conf, only works if famd is started from inetd. 

Hereby I enclose the rc. conf and dmesg output
$ cat /etc/rc.conf                                                             
#       $NetBSD: rc.conf,v 1.96 2000/10/14 17:01:29 wiz Exp $
#
# see rc.conf(5) for more information.
#
# Use program=YES to enable program, NO to disable it. program_flags are
# passed to the program on the command line.
#

# Load the defaults in from /etc/defaults/rc.conf (if it's readable).
# These can be overridden below.
#
if [ -r /etc/defaults/rc.conf ]; then
        . /etc/defaults/rc.conf
fi

# If this is not set to YES, the system will drop into single-user mode.
#
rc_configured=YES

# Add local overrides below
#
dhclient=YES
sshd=YES
famd=YES
rpcbind=YES
dbus=YES
hal=YES
cupsd=YES
slpd=NO
avahidaemon=YES
gdm=YES
hostapd=NO
ipmon=NO
pf=NO
sshd=YES

-------

dmesg:
$ dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.22 (GENERIC) #0: Thu Nov 19 05:46:23 UTC 2009
        builds@b7.netbsd.org:/home/builds/ab/HEAD/i386/200911190000Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 1014 MB
avail memory = 986 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO                           41875PG          (Lenovo                  )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x106c2
cpu1 at mainbus0 apid 1: Intel 686-class, 1596MHz, id 0x106c2
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20090730
acpi0: X/RSDT: OemId <PTLTD ,    XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
npx1 at acpi0 (MATH, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
VPC0 (VPC2004) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1024) (aux port): irq 12
acpitz0 at acpi0 (TZ00): critical 95.0C passive 45.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x27ac (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27ae (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0 vendor 0x10EC product 0x0269 nid 0x01 (firmware configuration)
hdafg0: DAC0:02, Analog Speaker: Fixed Function (Unknown, 14)
hdafg0: DAC0:02, Analog HP Out: Jack (Green, 15)
hdafg0: ADC1:07, Analog Mic In: Jack (Pink, 18)
hdafg0: ADC1:07, Analog Mic In: Fixed Function (Unknown, 19)
hdafg0: 2ch/2ch 32000Hz-192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
ppb0: disabling notification events
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci1 dev 0 function 0: Broadcom BCM5906M Fast Ethernet
bge0: interrupting at ioapic0 pin 16
bge0: ASIC BCM5906 A2 (0xc002), Ethernet address 00:23:8b:41:86:3b
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5906 10/100baseTX media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
ppb1: disabling notification events
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
ppb2: disabling notification events
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x14e4 product 0x4315 (miscellaneous network, revision 0x01) at pci3 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci4 at ppb3 bus 6
pci4: no spaces enabled!
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpiobus at ichlpcib0 not configured
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uvideo0 at uhub4 port 3 configuration 1 interface 0: BISON Corporation Lenovo EasyCamera, rev 2.00/14.04, addr 2
video0 at uvideo0: BISON Corporation Lenovo EasyCamera, rev 2.00/14.04, addr 2
wd0 at atabus1 drive 0: <HITACHI HTS543216L9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/58.87, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0: unable to open device, error = 19
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
ubt0 at uhub1 port 2
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

ubt0: Broadcom Corp BCM2046 Bluetooth Device, rev 2.00/6.01, addr 2
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
acpibat0: battery info: Celxpert, LION, LE60_C  



>How-To-Repeat:
Install gnome and enable all the deamons, if you start famd from inetd everything will work, if from rc.d as a standalone daemon, the keyboard does not react, only mouse runs.
>Fix:

>Audit-Trail:
From: kolaloka <kolaloka@netbsd.sk>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: pkg/42368: keyboard does not work if famd is started from rc.conf,
 only works if famd is started from inetd
Date: Mon, 23 Nov 2009 22:07:59 +0100

 I have found one more thing, if I start famd from inetd, the keyboard 
 works until I restart GDM, so I am afraid it has to be somehow GDM 
 related....

 gnats-admin@netbsd.org napsal(a):
 > Thank you very much for your problem report.
 > It has the internal identification `pkg/42368'.
 > The individual assigned to look at your
 > report is: pkg-manager. 
 >
 >   
 >> Category:       pkg
 >> Responsible:    pkg-manager
 >> Synopsis:       keyboard does not work if famd is started from rc.conf, only works if famd is started from inetd
 >> Arrival-Date:   Mon Nov 23 20:50:00 +0000 2009
 >>     
 >
 >   

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.