NetBSD Problem Report #43331
From gson@gson.org Thu May 20 14:38:11 2010
Return-Path: <gson@gson.org>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
by www.NetBSD.org (Postfix) with ESMTP id 0DD2563B873
for <gnats-bugs@gnats.NetBSD.org>; Thu, 20 May 2010 14:38:11 +0000 (UTC)
Message-Id: <20100520143806.6F8E875EA9@guava.gson.org>
Date: Thu, 20 May 2010 17:38:06 +0300 (EEST)
From: gson@gson.org (Andreas Gustafsson)
Reply-To: gson@gson.org (Andreas Gustafsson)
To: gnats-bugs@gnats.NetBSD.org
Subject: X server locks up under -current on NEC Versa DayLite laptop
X-Send-Pr-Version: 3.95
>Number: 43331
>Category: port-i386
>Synopsis: X server locks up under -current on NEC Versa DayLite laptop
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-i386-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Thu May 20 14:40:01 +0000 2010
>Last-Modified: Sat Dec 29 16:05:00 +0000 2018
>Originator: Andreas Gustafsson
>Release: NetBSD-current source date 2010.05.17.09.13.03
>Organization:
>Environment:
System: NetBSD gunnel.gson.org
Architecture: i386
Machine: i386
>Description:
I have a NEC Versa DayLite laptop which has been happily running
NetBSD 4.99.30 for a couple of years. When I tried upgrading to a
-current kernel, it booted successfully (modulo PR 42058), but when I
started the X server using "startx", it took a long time to start up
(40 seconds instead of the usual 5) and when it finally started, the
mouse cursor did not respond to the touchpad. The machine was still
up, as I could still log in to it over the network.
This might be related to the following error reported by pckbc in
dmesg:
pckbc1 at acpi0 (USKB, PNP0303) (kbd port): io 0x60,0x64 irq 1
[...many lines pertaining to other ACPI devices omitted...]
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: unable to establish interrupt for aux slot
This behavior and the pckbc error look similar to those reported on
amd64 in PR 35435. Figuring the problem might be ACPI related, I
tried building a custom kernel with
no pckbc* at acpi?
With that kernel, X starts normally, and I'm using it to write this
bug report.
>How-To-Repeat:
Good luck finding a NEC Versa DayLite these days :)
>Fix:
Don't know how, but at least there is a work-around.
>Audit-Trail:
From: coypu@sdf.org
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: port-i386/43331: X server locks up under -current on NEC Versa
DayLite laptop
Date: Sat, 29 Dec 2018 10:44:27 +0000
What does it attach as, if there's no pckbc at acpi? isa?
diffing the two:
pckbc_acpi_intr_establish(struct pckbc_softc *sc, pckbc_slot_t slot)
rv = isa_intr_establish_xname(ic, irq, ist, IPL_TTY,
pckbcintr, sc, intr_xname);
pckbc_isa_intr_establish(struct pckbc_softc *sc, pckbc_slot_t slot)
rv = isa_intr_establish(isc->sc_ic, isc->sc_irq[slot], IST_EDGE,
IPL_TTY, pckbcintr, sc);
I wonder what parameters each of one gets (in the successful and
unsuccesful case)
Also, acpidump -dt might be good to share.
From: Andreas Gustafsson <gson@gson.org>
To: coypu@sdf.org
Cc: gnats-bugs@NetBSD.org
Subject: Re: port-i386/43331: X server locks up under -current on NEC Versa
DayLite laptop
Date: Sat, 29 Dec 2018 14:25:29 +0200
coypu@sdf.org wrote:
> What does it attach as, if there's no pckbc at acpi? isa?
Yes. Here's the full dmesg from booting a kernel configured
with "no pckbc* at acpi?":
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 8.99.22 (GUNNEL) #0: Sun Jul 29 20:50:17 EEST 2018
[ 1.0000000] gson@guido.araneus.fi:/ssd/prod/gunnel.current/i386/obj/sys/arch/i386/compile/GUNNEL
[ 1.0000000] total memory = 175 MB
[ 1.0000000] avail memory = 147 MB
[ 1.0000000] timecounter: Timecounters tick every 10.000 msec
[ 1.0000000] Kernelized RAIDframe activated
[ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.0000030] NEC VUS6BCE-00B-000 ( )
[ 1.0000030] mainbus0 (root)
[ 1.0000030] ACPI: RSDP 0x00000000000F7330 000014 (v00 PTLTD )
[ 1.0000030] ACPI: RSDT 0x000000000AFFA5B9 000028 (v01 NEC ND000034 06040005 LTP 00000000)
[ 1.0000030] ACPI: FACP 0x000000000AFFFB8C 000074 (v01 NEC ND000034 06040005 PTL 000F4240)
[ 1.0000030] ACPI: DSDT 0x000000000AFFA5E1 0055AB (v01 NEC ND000034 06040005 MSFT 0100000B)
[ 1.0000030] ACPI: FACS 0x000000000AFFFFC0 000040
[ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 1.0000030] cpu0 at mainbus0
[ 1.0000030] cpu0: Transmeta(tm) Crusoe(tm) Processor TMTM5600, id 0x543
[ 1.0000030] cpu0: package 0, core 0, smt 0
[ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180427
[ 1.0000030] acpi0: X/RSDT: OemId <NEC ,ND000034,06040005>, AslId < LTP,00000000>
[ 1.0000030] LNK1: ACPI: Found matching pin for 0.3.INTA at func 0: 255
[ 1.0000030] LNK2: ACPI: Found matching pin for 0.4.INTA at func 0: 11
[ 1.0000030] LNK3: ACPI: Found matching pin for 0.5.INTA at func 0: 10
[ 1.0000030] LNK1: ACPI: Found matching pin for 0.6.INTA at func 0: 9
[ 1.0000030] LNKU: ACPI: Found matching pin for 0.20.INTA at func 0: 5
[ 1.0000030] acpi0: SCI interrupting at int 9
[ 1.0000030] acpi0: fixed power button present
[ 1.0000030] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
[ 1.0022541] attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
[ 1.0022541] MATH (PNP0C04) at acpi0 not configured
[ 1.0022541] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.0022541] midi0 at pcppi1: PC speaker
[ 1.0022541] sysbeep0 at pcppi1
[ 1.0022541] USKB (PNP0303) at acpi0 not configured
[ 1.0022541] SYSR (PNP0C02) at acpi0 not configured
[ 1.0022541] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.0022541] acpiacad0 at acpi0 (ADP, ACPI0003): ACPI AC Adapter
[ 1.0022541] acpibat0 at acpi0 (BAT2, PNP0C0A-2): ACPI Battery
[ 1.0022541] acpifan0 at acpi0 (LRA0, PNP0C0B): ACPI Fan
[ 1.0022541] acpitz0 at acpi0 (THRM)
[ 1.0022541] acpitz0: levels: critical 100.0 C, passive cooling
[ 1.0022541] apm0 at acpi0: Power Management spec V1.2
[ 1.0022541] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 1.0022541] attimer1: attached to pcppi1
[ 1.0022541] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.0022541] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.0022541] pchb0 at pci0 dev 0 function 0: vendor 1279 product 0395 (rev. 0x00)
[ 1.0022541] vendor 1279 product 0396 (RAM memory) at pci0 dev 0 function 1 not configured
[ 1.0022541] vendor 1279 product 0397 (RAM memory) at pci0 dev 0 function 2 not configured
[ 1.0022541] cbb0 at pci0 dev 3 function 0: vendor 104c product ac50 (rev. 0x01)
[ 1.0022541] eso0 at pci0 dev 4 function 0: ESS Solo-1 PCI AudioDrive ES1946 Revision E
[ 1.0022541] eso0: interrupting at irq 11
[ 1.0022541] eso0: mapping Audio 1 DMA using VC I/O space at 0x1480
[ 1.0022541] audio0 at eso0: full duplex, playback, capture, mmap, independent
[ 1.0022541] eso0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
[ 1.0022541] eso0: Latency: 256 milliseconds
[ 1.0022541] opl0 at eso0: model OPL3
[ 1.0022541] midi1 at opl0: ESO Yamaha OPL3
[ 1.0022541] mpu0 at eso0
[ 1.0022541] midi2 at mpu0: ESO MPU-401 MIDI UART
[ 1.0022541] joy0 at eso0
[ 1.0022541] joy0: joystick not connected
[ 1.0022541] vga0 at pci0 dev 5 function 0: vendor 1002 product 4c52 (rev. 0x64)
[ 1.0022541] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
[ 1.0022541] wsmux1: connecting to wsdisplay0
[ 1.0022541] drm at vga0 not configured
[ 1.0022541] fxp0 at pci0 dev 6 function 0: i82559S Ethernet (rev. 0x09)
[ 1.0022541] fxp0: interrupting at irq 9
[ 1.0022541] fxp0: May need receiver lock-up workaround
[ 1.0022541] fxp0: Ethernet address 00:10:a4:16:62:84
[ 1.0022541] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
[ 1.0022541] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0022541] vendor 115d product 002b (serial communications, 16550-compat) at pci0 dev 6 function 1 not configured
[ 1.0022541] pcib0 at pci0 dev 7 function 0: vendor 10b9 product 1533 (rev. 0x00)
[ 1.0022541] aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
[ 1.0022541] aceride0: bus-master DMA support present
[ 1.0022541] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
[ 1.0022541] aceride0: primary channel wired to compatibility mode
[ 1.0022541] aceride0: primary channel interrupting at irq 14
[ 1.0022541] atabus0 at aceride0 channel 0
[ 1.0022541] aceride0: secondary channel wired to compatibility mode
[ 1.0022541] aceride0: secondary channel interrupting at irq 15
[ 1.0022541] atabus1 at aceride0 channel 1
[ 1.0022541] alipm0 at pci0 dev 17 function 0: 74KHz clock
[ 1.0022541] iic0 at alipm0: I2C bus
[ 1.0022541] ohci0 at pci0 dev 20 function 0: vendor 10b9 product 5237 (rev. 0x03)
[ 1.0022541] ohci0: interrupting at irq 5
[ 1.0022541] ohci0: OHCI version 1.0, legacy support
[ 1.0022541] usb0 at ohci0: USB revision 1.0
[ 1.0022541] cbb0: cacheline 0x8 lattimer 0x51
[ 1.0022541] cbb0: bhlc 0x25108
[ 1.0022541] cbb0: interrupting at irq 9
[ 1.0022541] cardslot0 at cbb0
[ 1.0022541] cardbus0 at cardslot0: bus 1
[ 1.0022541] pcmcia0 at cardslot0
[ 1.0022541] isa0 at pcib0
[ 1.0022541] pckbc0 at isa0 port 0x60-0x64
[ 1.0022541] pckbd0 at pckbc0 (kbd slot)
[ 1.0022541] pckbc0: using irq 1 for kbd slot
[ 1.0022541] wskbd0 at pckbd0: console keyboard, using wsdisplay0
[ 1.0022541] pms0 at pckbc0 (aux slot)
[ 1.0022541] pckbc0: using irq 12 for aux slot
[ 1.0022541] wsmouse0 at pms0 mux 0
[ 1.0022541] acpicpu0 at cpu0: ACPI CPU
[ 1.0022541] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.0022541] acpicpu0: C2: I/O, lat 10 us, pow 0 mW
[ 1.0022541] acpicpu0: C3: I/O, lat 32 us, pow 0 mW
[ 1.0022541] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.0022541] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.0022541] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.0022541] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.0022541] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.0022541] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.0022541] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.0022541] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.0022541] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.5736044] acpiacad0: AC adapter online.
[ 1.6556880] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.6636228] uhub0: 2 ports with 2 removable, self powered
[ 1.8336844] IPsec: Initialized Security Association Processing.
[ 4.8236180] wd0 at atabus0 drive 0
[ 4.8337260] wd0: <IC25N020ATCS04-0>
[ 4.8337260] wd0: drive supports 16-sector PIO transfers, LBA addressing
[ 4.8337260] wd0: 19077 MB, 41344 cyl, 15 head, 63 sec, 512 bytes/sect x 39070080 sectors
[ 4.9536829] wd0: 32-bit data port
[ 4.9536829] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[ 4.9636255] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
[ 5.3937410] boot device: wd0
[ 5.3937410] root on wd0a dumps on wd0b
[ 5.5936220] root file system type: ffs
[ 5.6036674] kern.module.path=/stand/i386/8.99.22/modules
[ 5.6036674] WARNING: clock gained 152 days
I will respond to your other questions separately.
--
Andreas Gustafsson, gson@gson.org
From: Andreas Gustafsson <gson@gson.org>
To: coypu@sdf.org
Cc: gnats-bugs@NetBSD.org
Subject: Re: port-i386/43331: X server locks up under -current on NEC Versa
DayLite laptop
Date: Sat, 29 Dec 2018 16:49:52 +0200
coypu@sdf.org wrote:
> diffing the two:
>
> pckbc_acpi_intr_establish(struct pckbc_softc *sc, pckbc_slot_t slot)
>
> rv = isa_intr_establish_xname(ic, irq, ist, IPL_TTY,
> pckbcintr, sc, intr_xname);
>
> pckbc_isa_intr_establish(struct pckbc_softc *sc, pckbc_slot_t slot)
>
> rv = isa_intr_establish(isc->sc_ic, isc->sc_irq[slot], IST_EDGE,
> IPL_TTY, pckbcintr, sc);
>
> I wonder what parameters each of one gets (in the successful and
> unsuccesful case)
I applied the following patch to print the parameters:
Index: acpi/pckbc_acpi.c
===================================================================
RCS file: /bracket/repo/src/sys/dev/acpi/pckbc_acpi.c,v
retrieving revision 1.36
diff -u -r1.36 pckbc_acpi.c
--- acpi/pckbc_acpi.c 28 Oct 2017 04:53:55 -0000 1.36
+++ acpi/pckbc_acpi.c 29 Dec 2018 13:25:24 -0000
@@ -256,7 +256,7 @@
char intr_xname[64];
snprintf(intr_xname, sizeof(intr_xname), "%s %s",
device_xname(psc->sc_pckbc.sc_dv), pckbc_slot_names[slot]);
-
+ printf("isa_intr_establish_xname(ic, irq=%d, ist=%d, IPL_TTY=%d, pckbcintr, sc, intr_xname=%s\n", irq, ist, IPL_TTY, intr_xname);
rv = isa_intr_establish_xname(ic, irq, ist, IPL_TTY, pckbcintr,
sc, intr_xname);
}
Index: isa/pckbc_isa.c
===================================================================
RCS file: /bracket/repo/src/sys/dev/isa/pckbc_isa.c,v
retrieving revision 1.26
diff -u -r1.26 pckbc_isa.c
--- isa/pckbc_isa.c 3 Apr 2014 23:49:47 -0000 1.26
+++ isa/pckbc_isa.c 29 Dec 2018 13:25:21 -0000
@@ -218,6 +218,7 @@
struct pckbc_isa_softc *isc = (void *) sc;
void *rv;
+ printf("isa_intr_establish(isc->sc_ic, isc->sc_irq[slot]=%d, IST_EDGE=%d, IPL_TTY=%d, pckbcintr, sc\n", isc->sc_irq[slot], IST_EDGE, IPL_TTY);
rv = isa_intr_establish(isc->sc_ic, isc->sc_irq[slot], IST_EDGE,
IPL_TTY, pckbcintr, sc);
if (rv == NULL) {
dmesg output from today's -current, disabling "pckbc* at acpi?" in
userconf to work around the bug:
[ 1.0032649] pckbc0 at isa0 port 0x60-0x64
[ 1.0032649] pckbd0 at pckbc0 (kbd slot)
[ 1.0032649] isa_intr_establish(isc->sc_ic, isc->sc_irq[slot]=1, IST_EDGE=2, IPL_TTY=6, pckbcintr, sc
[ 1.0032649] pckbc0: using irq 1 for kbd slot
[ 1.0032649] wskbd0 at pckbd0: console keyboard, using wsdisplay0
[ 1.0032649] pms0 at pckbc0 (aux slot)
[ 1.0032649] isa_intr_establish(isc->sc_ic, isc->sc_irq[slot]=12, IST_EDGE=2, IPL_TTY=6, pckbcintr, sc
[ 1.0032649] pckbc0: using irq 12 for aux slot
[ 1.0032649] wsmouse0 at pms0 mux 0
Ditto w/o userconf, triggering the bug:
[ 1.0027771] pckbc1 at acpi0 (USKB, PNP0303) (kbd port): io 0x60,0x64 irq 1
[ 1.0027771] SYSR (PNP0C02) at acpi0 not configured
[ 1.0027771] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.0027771] acpiacad0 at acpi0 (ADP, ACPI0003): ACPI AC Adapter
[ 1.0027771] acpibat0 at acpi0 (BAT2, PNP0C0A-2): ACPI Battery
[ 1.0027771] acpifan0 at acpi0 (LRA0, PNP0C0B): ACPI Fan
[ 1.0027771] acpitz0 at acpi0 (THRM)
[ 1.0027771] acpitz0: levels: critical 100.0 C, passive cooling
[ 1.0027771] apm0 at acpi0: Power Management spec V1.2
[ 1.0027771] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 1.0027771] attimer1: attached to pcppi1
[ 1.0027771] pckbd0 at pckbc1 (kbd slot)
[ 1.0027771] isa_intr_establish_xname(ic, irq=1, ist=2, IPL_TTY=6, pckbcintr, sc, intr_xname=pckbc1 kbd
[ 1.0027771] pckbc1: using irq 1 for kbd slot
[ 1.0027771] wskbd0 at pckbd0: console keyboard
[ 1.0027771] pms0 at pckbc1 (aux slot)
[ 1.0027771] pckbc1: autoconfiguration error: unable to establish interrupt for aux slot
[ 1.0027771] wsmouse0 at pms0 mux 0
Presumably the absence of a second isa_intr_establish_xname() call in
the latter case means that the condition "if (i < pckbc_cd.cd_ndevs)"
in pckbc_acpi_intr_establish() was false.
> Also, acpidump -dt might be good to share.
http://www.gson.org/netbsd/bugs/43331/acpidump-dt.txt
--
Andreas Gustafsson, gson@gson.org
From: Andreas Gustafsson <gson@gson.org>
To: coypu@sdf.org
Cc: gnats-bugs@NetBSD.org
Subject: Re: port-i386/43331: X server locks up under -current on NEC Versa
DayLite laptop
Date: Sat, 29 Dec 2018 18:01:54 +0200
I added another debug printf:
diff -u -r1.36 pckbc_acpi.c
--- pckbc_acpi.c 28 Oct 2017 04:53:55 -0000 1.36
+++ pckbc_acpi.c 29 Dec 2018 15:25:04 -0000
@@ -245,6 +245,9 @@
*/
for (i = 0; i < pckbc_cd.cd_ndevs; i++) {
psc = device_lookup_private(&pckbc_cd, i);
+ printf(" i=%d psc=%p\n", i, psc);
+ if (psc)
+ printf(" psc->sc_slot=%d slot=%d\n", psc->sc_slot, slot);
if (psc && psc->sc_slot == slot) {
irq = psc->sc_irq;
ist = psc->sc_ist;
Full dmesg output with both this and the previous patch:
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 8.99.29 (GUNNEL_TEST) #2: Sat Dec 29 17:25:16 EET 2018
[ 1.0000000] gson@guido.araneus.fi:/ssd/current/i386/obj/sys/arch/i386/compile/GUNNEL_TEST
[ 1.0000000] total memory = 175 MB
[ 1.0000000] avail memory = 151 MB
[ 1.0000000] timecounter: Timecounters tick every 10.000 msec
[ 1.0000000] Kernelized RAIDframe activated
[ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.0000030] NEC VUS6BCE-00B-000 ( )
[ 1.0000030] mainbus0 (root)
[ 1.0000030] ACPI: RSDP 0x00000000000F7330 000014 (v00 PTLTD )
[ 1.0000030] ACPI: RSDT 0x000000000AFFA5B9 000028 (v01 NEC ND000034 06040005 LTP 00000000)
[ 1.0000030] ACPI: FACP 0x000000000AFFFB8C 000074 (v01 NEC ND000034 06040005 PTL 000F4240)
[ 1.0000030] ACPI: DSDT 0x000000000AFFA5E1 0055AB (v01 NEC ND000034 06040005 MSFT 0100000B)
[ 1.0000030] ACPI: FACS 0x000000000AFFFFC0 000040
[ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 1.0000030] cpu0 at mainbus0
[ 1.0000030] cpu0: Transmeta(tm) Crusoe(tm) Processor TMTM5600, id 0x543
[ 1.0000030] cpu0: package 0, core 0, smt 0
[ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180810
[ 1.0000030] acpi0: X/RSDT: OemId <NEC ,ND000034,06040005>, AslId < LTP,00000000>
[ 1.0000030] LNK1: ACPI: Found matching pin for 0.3.INTA at func 0: 255
[ 1.0000030] LNK2: ACPI: Found matching pin for 0.4.INTA at func 0: 11
[ 1.0000030] LNK3: ACPI: Found matching pin for 0.5.INTA at func 0: 10
[ 1.0000030] LNK1: ACPI: Found matching pin for 0.6.INTA at func 0: 9
[ 1.0000030] LNKU: ACPI: Found matching pin for 0.20.INTA at func 0: 5
[ 1.0000030] acpi0: SCI interrupting at int 9
[ 1.0000030] acpi0: fixed power button present
[ 1.0000030] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
[ 1.0029623] attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
[ 1.0029623] MATH (PNP0C04) at acpi0 not configured
[ 1.0029623] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.0029623] midi0 at pcppi1: PC speaker
[ 1.0029623] sysbeep0 at pcppi1
[ 1.0029623] pckbc1 at acpi0 (USKB, PNP0303) (kbd port): io 0x60,0x64 irq 1
[ 1.0029623] SYSR (PNP0C02) at acpi0 not configured
[ 1.0029623] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.0029623] acpiacad0 at acpi0 (ADP, ACPI0003): ACPI AC Adapter
[ 1.0029623] acpibat0 at acpi0 (BAT2, PNP0C0A-2): ACPI Battery
[ 1.0029623] acpifan0 at acpi0 (LRA0, PNP0C0B): ACPI Fan
[ 1.0029623] acpitz0 at acpi0 (THRM)
[ 1.0029623] acpitz0: levels: critical 100.0 C, passive cooling
[ 1.0029623] apm0 at acpi0: Power Management spec V1.2
[ 1.0029623] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 1.0029623] attimer1: attached to pcppi1
[ 1.0029623] pckbd0 at pckbc1 (kbd slot)
[ 1.0029623] i=0 psc=0x0
[ 1.0029623] i=1 psc=0xc1a52180
[ 1.0029623] psc->sc_slot=0 slot=0
[ 1.0029623] isa_intr_establish_xname(ic, irq=1, ist=2, IPL_TTY=6, pckbcintr, sc, intr_xname=pckbc1 kbd
[ 1.0029623] pckbc1: using irq 1 for kbd slot
[ 1.0029623] wskbd0 at pckbd0: console keyboard
[ 1.0029623] pms0 at pckbc1 (aux slot)
[ 1.0029623] i=0 psc=0x0
[ 1.0029623] i=1 psc=0xc1a52180
[ 1.0029623] psc->sc_slot=0 slot=1
[ 1.0029623] i=2 psc=0x0
[ 1.0029623] i=3 psc=0x0
[ 1.0029623] pckbc1: autoconfiguration error: unable to establish interrupt for aux slot
[ 1.0029623] wsmouse0 at pms0 mux 0
[ 1.0029623] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.0029623] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.0029623] pchb0 at pci0 dev 0 function 0: vendor 1279 product 0395 (rev. 0x00)
[ 1.0029623] vendor 1279 product 0396 (RAM memory) at pci0 dev 0 function 1 not configured
[ 1.0029623] vendor 1279 product 0397 (RAM memory) at pci0 dev 0 function 2 not configured
[ 1.0029623] cbb0 at pci0 dev 3 function 0: vendor 104c product ac50 (rev. 0x01)
[ 1.0029623] eso0 at pci0 dev 4 function 0: ESS Solo-1 PCI AudioDrive ES1946 Revision E
[ 1.0029623] eso0: interrupting at irq 11
[ 1.0029623] eso0: mapping Audio 1 DMA using VC I/O space at 0x1480
[ 1.0029623] audio0 at eso0: full duplex, playback, capture, mmap, independent
[ 1.0029623] eso0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
[ 1.0029623] eso0: Latency: 256 milliseconds
[ 1.0029623] opl0 at eso0: model OPL3
[ 1.0029623] midi1 at opl0: ESO Yamaha OPL3
[ 1.0029623] mpu0 at eso0
[ 1.0029623] midi2 at mpu0: ESO MPU-401 MIDI UART
[ 1.0029623] joy0 at eso0
[ 1.0029623] joy0: joystick not connected
[ 1.0029623] vga0 at pci0 dev 5 function 0: vendor 1002 product 4c52 (rev. 0x64)
[ 1.0029623] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
[ 1.0029623] wsmux1: connecting to wsdisplay0
[ 1.0029623] drm at vga0 not configured
[ 1.0029623] fxp0 at pci0 dev 6 function 0: i82559S Ethernet (rev. 0x09)
[ 1.0029623] fxp0: interrupting at irq 9
[ 1.0029623] fxp0: May need receiver lock-up workaround
[ 1.0029623] fxp0: Ethernet address 00:10:a4:16:62:84
[ 1.0029623] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
[ 1.0029623] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0029623] vendor 115d product 002b (serial communications, 16550-compat) at pci0 dev 6 function 1 not configured
[ 1.0029623] pcib0 at pci0 dev 7 function 0: vendor 10b9 product 1533 (rev. 0x00)
[ 1.0029623] aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
[ 1.0029623] aceride0: bus-master DMA support present
[ 1.0029623] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
[ 1.0029623] aceride0: primary channel wired to compatibility mode
[ 1.0029623] aceride0: primary channel interrupting at irq 14
[ 1.0029623] atabus0 at aceride0 channel 0
[ 1.0029623] aceride0: secondary channel wired to compatibility mode
[ 1.0029623] aceride0: secondary channel interrupting at irq 15
[ 1.0029623] atabus1 at aceride0 channel 1
[ 1.0029623] alipm0 at pci0 dev 17 function 0: 74KHz clock
[ 1.0029623] iic0 at alipm0: I2C bus
[ 1.0029623] ohci0 at pci0 dev 20 function 0: vendor 10b9 product 5237 (rev. 0x03)
[ 1.0029623] ohci0: interrupting at irq 5
[ 1.0029623] ohci0: OHCI version 1.0, legacy support
[ 1.0029623] usb0 at ohci0: USB revision 1.0
[ 1.0029623] cbb0: cacheline 0x8 lattimer 0x51
[ 1.0029623] cbb0: bhlc 0x25108
[ 1.0029623] cbb0: interrupting at irq 9
[ 1.0029623] cardslot0 at cbb0
[ 1.0029623] cardbus0 at cardslot0: bus 1
[ 1.0029623] pcmcia0 at cardslot0
[ 1.0029623] isa0 at pcib0
[ 1.0029623] acpicpu0 at cpu0: ACPI CPU
[ 1.0029623] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.0029623] acpicpu0: C2: I/O, lat 10 us, pow 0 mW
[ 1.0029623] acpicpu0: C3: I/O, lat 32 us, pow 0 mW
[ 1.0029623] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.0029623] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.0029623] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.0029623] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.0029623] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.0029623] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.0029623] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.0029623] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.0029623] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.3361591] acpiacad0: AC adapter online.
[ 1.5376596] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.5462973] uhub0: 2 ports with 2 removable, self powered
[ 1.5584676] IPsec: Initialized Security Association Processing.
[ 1.5961533] tlp0 at cardbus0 function 0: ADMtek AN985 Ethernet, pass 1.1
[ 1.7561265] tlp0: Ethernet address 00:0a:cd:10:e0:e4
[ 1.7665426] ukphy0 at tlp0 phy 1: OUI 0x00e092, model 0x0001, rev. 1
[ 1.7761776] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 4.6961708] wd0 at atabus0 drive 0
[ 4.7062215] wd0: <IC25N020ATCS04-0>
[ 4.7062215] wd0: drive supports 16-sector PIO transfers, LBA addressing
[ 4.7062215] wd0: 19077 MB, 41344 cyl, 15 head, 63 sec, 512 bytes/sect x 39070080 sectors
[ 4.8061890] wd0: 32-bit data port
[ 4.8061890] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[ 4.8173401] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
[ 5.2261938] WARNING: 1 error while detecting hardware; check system log.
[ 5.2261938] boot device: wd0
[ 5.2261938] root on wd0a dumps on wd0b
[ 5.4361950] root file system type: ffs
[ 5.4361950] kern.module.path=/stand/i386/8.99.29/modules
[ 22.2166358] wsdisplay0: screen 1 added (80x25, vt100 emulation)
[ 22.2664779] wsdisplay0: screen 2 added (80x25, vt100 emulation)
[ 22.3066084] wsdisplay0: screen 3 added (80x25, vt100 emulation)
[ 22.3464892] wsdisplay0: screen 4 added (80x25, vt100 emulation)
[ 31.4766259] acpibat0: normal capacity on 'charge state'
[ 72.0372443] tlp0: transmit underrun; new threshold: 96/256 bytes
[ 75.6472607] tlp0: transmit underrun; new threshold: 128/512 bytes
--
Andreas Gustafsson, gson@gson.org
(Contact us)
$NetBSD: query-full-pr,v 1.43 2018/01/16 07:36:43 maya Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2017
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.
Home