NetBSD Problem Report #43858

From www@NetBSD.org  Thu Sep  9 09:51:16 2010
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [204.152.190.11])
	by www.NetBSD.org (Postfix) with ESMTP id D8F9E63BC83
	for <gnats-bugs@gnats.NetBSD.org>; Thu,  9 Sep 2010 09:51:16 +0000 (UTC)
Message-Id: <20100909095116.9BABD63BC80@www.NetBSD.org>
Date: Thu,  9 Sep 2010 09:51:16 +0000 (UTC)
From: slashwaves@yahoo.com
Reply-To: slashwaves@yahoo.com
To: gnats-bugs@NetBSD.org
Subject: rum driver for usb lan
X-Send-Pr-Version: www-1.0

>Number:         43858
>Category:       misc
>Synopsis:       rum driver for usb lan
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    misc-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Sep 09 09:55:00 +0000 2010
>Originator:     ST. Hermawan
>Release:        5.0.1
>Organization:
Indo Premier Securities
>Environment:
>Description:
$dmesg

  Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009
     The NetBSD Foundation, Inc.  All rights reserved.
  Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

  NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 01:39:11 UTC 2009
     builds@b8.netbsd.org:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
  total memory = 126 MB
  avail memory = 112 MB
  timecounter: Timecounters tick every 10.000 msec
  timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
  IBM 6648K7U
  mainbus0 (root)
  cpu0 at mainbus0 apid 0: Intel 686-class, 731MHz, id 0x686
  ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
  acpi0 at mainbus0: Intel ACPICA 20080321
  acpi0: X/RSDT: OemId <IBM  ,CDTPWSPI,00001010 , AslId <IBM ,00000000 
  acpi0: SCI interrupting at int 9
  acpi0: fixed-feature power button present
  timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
  ACPI-Fast 24-bit timer
  FDC0 (PNP0700) at acpi0 not configured
  ECP (PNP0401) at acpi0 not configured
  pckbc1 at acpi0 (PS2K, PNP0303): kbd port
  pckbc1: io 0x60,0x64 irq 1
  pckbc2 at acpi0 (PS2M, PNP0F13): aux port
  pckbc2: irq 12
  UAR1 (PNP0501) at acpi0 not configured
  UAR2 (PNP0501) at acpi0 not configured
  PIC2 (PNP0003) at acpi0 not configured
  attimer1 at acpi0 (TMR, PNP0100): AT Timer
  attimer1: io 0x40-0x43 irq 0
  pcppi1 at acpi0 (SPKR, PNP0800)
  pcppi1: io 0x61
  midi0 at pcppi1: PC speaker (CPU-intensive output)
  sysbeep0 at pcppi1
  npx1 at acpi0 (COPR, PNP0C04)
  npx1: io 0xf0-0xff irq 13
  npx1: reported by CPUID; using exception 16
  FWH (INT0800) at acpi0 not configured
  acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
  apm0 at acpi0: Power Management spec V1.2
  pckbd0 at pckbc1 (kbd slot)
  pckbc1: using irq 1 for kbd slot
  wskbd0 at pckbd0: console keyboard
  pms0 at pckbc1 (aux slot)
  pckbc1: using irq 12 for aux slot
  wsmouse0 at pms0 mux 0
  attimer1: attached to pcppi1
  pci0 at mainbus0 bus 0: configuration mode 1
  pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
  pchb0 at pci0 dev 0 function 0
  pchb0: vendor 0x8086 product 0x1130 (rev. 0x02)
  agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
  vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x1132 (rev. 0x02)
  wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
  wsmux1: connecting to wsdisplay0
  drm at vga1 not configured
  ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x02)
  pci1 at ppb0 bus 1
  pci1: i/o space, memory space enabled
  fxp0 at pci1 dev 8 function 0: Intel i82562 Ethernet, rev 1
  fxp0: interrupting at ioapic0 pin 20
  fxp0: Ethernet address 00:02:55:b1:60:bb
  inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
  inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  tlp0 at pci1 dev 9 function 0: Davicom DM9102A Ethernet, pass 3.1
  tlp0: interrupting at ioapic0 pin 17
  tlp0: Ethernet address 00:80:ad:72:b2:03
  dmphy0 at tlp0 phy 1: DM9102 10/100 media interface, rev.. 0
  dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  rtk0 at pci1 dev 10 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
  rtk0: interrupting at ioapic0 pin 18
  rtk0: Ethernet address 00:e0:4c:12:9a:ce
  rlphy0 at rtk0 phy 7: Realtek internal PHY
  rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  ichlpcib0 at pci0 dev 31 function 0
  ichlpcib0: vendor 0x8086 product 0x2440 (rev. 0x02)
  timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
  ichlpcib0: 24-bit timer
  ichlpcib0: TCO (watchdog) timer configured.
  piixide0 at pci0 dev 31 function 1
  piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x02)
  piixide0: bus-master DMA support present
  piixide0: primary channel wired to compatibility mode
  piixide0: primary channel interrupting at ioapic0 pin 14
  atabus0 at piixide0 channel 0
  piixide0: secondary channel wired to compatibility mode
  piixide0: secondary channel interrupting at ioapic0 pin 15
  atabus1 at piixide0 channel 1
  uhci0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2442 (rev. 0x02)
  uhci0: interrupting at ioapic0 pin 19
  usb0 at uhci0: USB revision 1.0
  ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2443 (rev. 0x02)
  ichsmb0: interrupting at ioapic0 pin 17
  iic0 at ichsmb0: I2C bus
  auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio
  auich0: interrupting at ioapic0 pin 17
  auich0: ac97: Analog Devices AD1885 codec; headphone, Analog Devices Phat Stereo
  auich0: ac97: ext id 1<VRA 
  isa0 at ichlpcib0
  lpt0 at isa0 port 0x378-0x37b irq 7
  com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
  com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
  fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
  timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
  auich0: measured ac97 link rate at 55154 Hz, will use 55000 Hz
  audio0 at auich0: full duplex, mmap, independent
  fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
  uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
  uhub0: 2 ports with 2 removable, self powered
  rum0 at uhub0 port 2
  rum0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
  rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:15:e9:33:e9:59
  rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
  rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  wd0 at atabus0 drive 0: <FUJITSU MPE3084AE 
  wd0: drive supports 16-sector PIO transfers, LBA addressing
  wd0: 8063 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 sectors
  wd0: 32-bit data port
  wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
  wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
  atapibus0 at atabus1: 2 targets
  cd0 at atapibus0 drive 0: <ASUS    DVD-E616A2, , 1.03  cdrom removable
  cd0: 32-bit data port
  cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
  cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
  Kernelized RAIDframe activated
  pad0: outputs: 44100Hz, 16-bit, stereo
  audio1 at pad0: half duplex
  boot device: wd0
  root on wd0a dumps on wd0b
  root file system type: ffs
  wsdisplay0: screen 1 added (80x25, vt100 emulation)
  wsdisplay0: screen 2 added (80x25, vt100 emulation)
  wsdisplay0: screen 3 added (80x25, vt100 emulation)
  wsdisplay0: screen 4 added (80x25, vt100 emulation)



$wpa_supplicant
Initializing interface 'rum0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
  Reading configuration file '/etc/wpa_supplicant.conf'
  Priority group 0
     id=0 ssid='VIP - C2/53 Wireless Broadband'
  Initializing interface (2) 'rum0'
  Own MAC address: 00:15:e9:33:e9:59
  wpa_driver_bsd_set_wpa: enabled=1
  wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
  wpa_driver_bsd_del_key: keyidx=0
  wpa_driver_bsd_del_key: keyidx=1
  wpa_driver_bsd_del_key: keyidx=2
  wpa_driver_bsd_del_key: keyidx=3
  wpa_driver_bsd_set_countermeasures: enabled=0
  wpa_driver_bsd_set_drop_unencrypted: enabled=1
  RSN: flushing PMKID list in the driver
  Setting scan request: 0 sec 100000 usec
  EAPOL: SUPP_PAE entering state DISCONNECTED
  EAPOL: KEY_RX entering state NO_KEY_RECEIVE
  EAPOL: SUPP_BE entering state INITIALIZE
  EAP: EAP entering state DISABLED
  Added interface rum0
  State: DISCONNECTED -  SCANNING
  Starting AP scan (specific SSID)
  Scan SSID - hexdump_ascii(len=30):
       56 49 50 20 2d 20 43 32 2f 35 33 20 57 69 72 65  VIP - C2/53 Wire
       6c 65 73 73 20 42 72 6f 61 64 62 61 6e 64        less Broadband  
  Trying to get current scan results first without requesting a new scan to speed up initial association
  Received 0 bytes of scan results (0 BSSes)
  Scan results: 0
  CTRL-EVENT-SCAN-RESULTS 
  Selecting BSS from priority group 0
  Try to find WPA-enabled AP
  Try to find non-WPA AP
  No suitable AP found.
  Setting scan request: 0 sec 0 usec
  Starting AP scan (broadcast SSID)
  EAPOL: disable timer tick
  RTM_IFINFO: Interface 'rum0' UP
  RTM_???: 14
  RTM_IEEE80211: scan result (105)
  Received 96 bytes of scan results (1 BSSes)
  Scan results: 1
  CTRL-EVENT-SCAN-RESULTS 
  Selecting BSS from priority group 0
  Try to find WPA-enabled AP
  0: 00:18:82:27:5f:96 ssid='VIP - C2/53 Wireless Broadband' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
     selected based on WPA IE
     selected WPA AP 00:18:82:27:5f:96 ssid='VIP - C2/53 Wireless Broadband'
  Trying to associate with 00:18:82:27:5f:96 (SSID='VIP - C2/53 Wireless Broadband' freq=2462 MHz)
  Cancelling scan request
  WPA: clearing own WPA/RSN IE
  Automatic auth_alg selection: 0x1
  WPA: using IEEE 802.11i/D3.0
  WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
  WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
  WPA: clearing AP RSN IE
  WPA: using GTK TKIP
  WPA: using PTK TKIP
  WPA: using KEY_MGMT WPA-PSK
  WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
  No keys have been configured - skip key clearing
  wpa_driver_bsd_set_drop_unencrypted: enabled=1
  State: SCANNING -  ASSOCIATING
  wpa_driver_bsd_associate: ssid 'VIP - C2/53 Wireless Broadband' wpa ie len 24 pairwise 2 group 2 key mgmt 1
  wpa_driver_bsd_associate: set PRIVACY 1
  Association request to the driver failed
  Setting authentication timeout: 5 sec 0 usec
  EAPOL: External notification - EAP success=0
  EAPOL: External notification - EAP fail=0
  EAPOL: External notification - portControl=Auto
  CTRL-EVENT-TERMINATING - signal 2 received
  Removing interface rum0
  State: ASSOCIATING -  DISCONNECTED
  No keys have been configured - skip key clearing
  EAPOL: External notification - portEnabled=0
  EAPOL: External notification - portValid=0
  wpa_driver_bsd_set_wpa: enabled=0
  wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
  wpa_driver_bsd_set_drop_unencrypted: enabled=0
  wpa_driver_bsd_set_countermeasures: enabled=0
  No keys have been configured - skip key clearing
  Cancelling scan request
  Cancelling authentication timeout
  wpa_driver_bsd_set_wpa_internal: wpa=1 privacy=1



>How-To-Repeat:

>Fix:

Home	PR Database Search