NetBSD Problem Report #46061
From Ephaeton@gmx.net Mon Feb 20 18:45:18 2012
Return-Path: <Ephaeton@gmx.net>
Received: from mail.netbsd.org (mail.netbsd.org [149.20.53.66])
by www.NetBSD.org (Postfix) with ESMTP id 77DA663BCF4
for <gnats-bugs@gnats.NetBSD.org>; Mon, 20 Feb 2012 18:45:18 +0000 (UTC)
Message-Id: <20120220184444.09A822C84@agamemnon.entropie.local>
Date: Mon, 20 Feb 2012 13:44:44 -0500 (EST)
From: Ephaeton@gmx.net
Reply-To: Ephaeton@gmx.net
To: gnats-bugs@gnats.NetBSD.org
Subject: NetBSD 6.0 does not boot: instant reboot
X-Send-Pr-Version: 3.95
>Number: 46061
>Category: port-i386
>Synopsis: NetBSD 6.0 does not boot: instant reboot
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: port-i386-maintainer
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Mon Feb 20 18:50:00 +0000 2012
>Closed-Date: Sat May 20 19:27:07 +0000 2017
>Last-Modified: Sat May 20 19:27:07 +0000 2017
>Originator: Martin S. Weber
>Release: NetBSD 6.0
>Organization:
>Environment:
System: NetBSD agamemnon.entropie.local 5.1_STABLE NetBSD 5.1_STABLE (AGAMEMNON5) #3: Thu Dec 8 09:45:09 EST 2011 root@agamemnon.entropie.local:/space/obj/sys/arch/i386/compile/AGAMEMNON5 i386
Architecture: i386
Machine: i386
>Description:
In testing the upcoming 6.0 release I realized that NetBSD cannot boot my box anylonger. Upon
boot prompt, it immediately reboots after a short pause after only displaying the first line
of the numbers (that it read from disk, I assume). I had NEtBSD 6.0 installed along with its
modules (a GENERIC kernel), built from source on February 18th. The box in question is a
Thinkpad T61. I attach the dmesg of the box from 5.1_STABLE:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1_STABLE (AGAMEMNON5) #3: Thu Dec 8 09:45:09 EST 2011
root@agamemnon.entropie.local:/space/obj/sys/arch/i386/compile/AGAMEMNON5
total memory = 3046 MB
avail memory = 2981 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 7658CTO (ThinkPad T61)
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x0000580c
cpu0 at mainbus0 apid 0: Intel 686-class, 2094MHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel 686-class, 2094MHz, id 0x10676
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <LENOVO,TP-7L ,00002260>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (FPU, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: SANYO, LION, 42T5262 10603
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: using CMOS at \UCMS
thinkpad0: using EC at acpiecdt0
WMI0 (PNP0C14) at acpi0 not configured
acpitz0 at acpi0 (THM0): critical 127.0C, passive cooling
acpitz1 at acpi0 (THM1): critical 100.0C passive 79.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Passthrough, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a00 (rev. 0x0c)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x0c)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i965GM
i915drm0: AGP at 0xe0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured
vendor 0x8086 product 0x2a04 (miscellaneous communications, revision 0x0c) at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2
pciide0: vendor 0x8086 product 0x2a06 (rev. 0x0c)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
vendor 0x8086 product 0x2a07 (serial communications, interface 0x02, revision 0x0c) at pci0 dev 3 function 3 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller, rev. 3
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:21:86:56:09:ee
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x8086/0x284b (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci2 dev 0 function 0
ath0: interrupting at ioapic0 pin 17
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x2845 (rev. 0x03)
ppb3: disabling notification events
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x03)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
cbb0 at pci6 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
fwohci0 at pci6 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:29:65:04
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x1180 product 0x0822 (SD Host Controller system, revision 0x21) at pci6 dev 0 function 2 not configured
vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x11) at pci6 dev 0 function 3 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x11) at pci6 dev 0 function 4 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x11) at pci6 dev 0 function 5 not configured
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2811 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus2 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe710e080
atabus3 at ahcisata0 channel 0
atabus4 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1984 (rev. 4.0), HDA rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0), HDA rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, playback, capture, independent
atapibus0 at atabus2: 2 targets
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
acpiacad0: AC adapter online.
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-M10N, , 1.02> cdrom removable
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus3 drive 0: <WDC WD5000BEKT-75KA9T0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uvideo0 at uhub6 port 5 configuration 1 interface 0: Chicony Electronics Co., Ltd. Integrated Camera, rev 2.00/3.20, addr 2
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev 2.00/3.20, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhub7 at uhub1 port 1: Cypress Semiconductor Combi keyboref design V1.68, class 9/0, rev 1.10/0.01, addr 2
uhub7: 3 ports with 2 removable, bus powered
uhidev0 at uhub7 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 2.00/22.00, addr 3, iclass 3/1
ums0 at uhidev0: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 2.00/22.00, addr 3, iclass 3/0
uhidev1: 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
uhidev2 at uhub7 port 3 configuration 1 interface 0
uhidev2: vendor 0x060b product 0x2001, rev 1.10/0.01, addr 4, iclass 3/1
ukbd0 at uhidev2
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub7 port 3 configuration 1 interface 1
uhidev3: vendor 0x060b product 0x2001, rev 1.10/0.01, addr 4, iclass 3/0
uhidev3: 2 report ids
uhid3 at uhidev3 reportid 1: input=3, output=0, feature=0
uhid4 at uhidev3 reportid 2: input=1, output=0, feature=0
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Build NetBSD 6.0 and try and boot the kernel on a Thinkpad T61
>Fix:
n/a
>Release-Note:
>Audit-Trail:
From: Jukka Ruohonen <jruohonen@iki.fi>
To: gnats-bugs@NetBSD.org
Cc: port-i386-maintainer@NetBSD.org, gnats-admin@NetBSD.org,
netbsd-bugs@NetBSD.org
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Mon, 20 Feb 2012 21:26:37 +0200
On Mon, Feb 20, 2012 at 06:50:01PM +0000, Ephaeton@gmx.net wrote:
> >Number: 46061
> >Category: port-i386
> >Synopsis: NetBSD 6.0 does not boot: instant reboot
Mysterious "instant reboots" are also reported in e.g. PR kern/45851.
From: Martin Husemann <martin@duskware.de>
To: gnats-bugs@NetBSD.org
Cc: port-i386-maintainer@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Mon, 20 Feb 2012 21:03:10 +0100
How did you update? Basically the main question is: did the mbr code
get updated? The primary boot code, and/or /boot?
Martin
From: "Martin S. Weber" <Ephaeton@gmx.net>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Mon, 20 Feb 2012 15:10:52 -0500
On Mon, Feb 20, 2012 at 08:05:03PM +0000, Martin Husemann wrote:
> The following reply was made to PR port-i386/46061; it has been noted by GNATS.
>
> From: Martin Husemann <martin@duskware.de>
> To: gnats-bugs@NetBSD.org
> Cc: port-i386-maintainer@netbsd.org, gnats-admin@netbsd.org,
> netbsd-bugs@netbsd.org
> Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
> Date: Mon, 20 Feb 2012 21:03:10 +0100
>
> How did you update? Basically the main question is: did the mbr code
> get updated? The primary boot code, and/or /boot?
>
No, no, no.
I just copied the compiled kernel to / and its modules to /stand/i386/6.0.
The mbr code and all the rest is from netbsd-5 times. I don't see anything
in UPDATING signaling the necessity of updating the boot code though.
Regards,
-another Martin
From: Martin Husemann <martin@duskware.de>
To: gnats-bugs@NetBSD.org
Cc: port-i386-maintainer@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org, Ephaeton@gmx.net
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Mon, 20 Feb 2012 21:17:52 +0100
On Mon, Feb 20, 2012 at 08:15:05PM +0000, Martin S. Weber wrote:
> I just copied the compiled kernel to / and its modules to /stand/i386/6.0.
> The mbr code and all the rest is from netbsd-5 times. I don't see anything
> in UPDATING signaling the necessity of updating the boot code though.
Oh, great - so we can rule out the boot code (which the other PR mentioned
is about).
How far do you get? No copyright banner at all? Does it display cpu type
and/or memory info before it reboots?
Martin
From: "Martin S. Weber" <Ephaeton@gmx.net>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Mon, 20 Feb 2012 15:57:32 -0500
On Mon, Feb 20, 2012 at 08:20:07PM +0000, Martin Husemann wrote:
> The following reply was made to PR port-i386/46061; it has been noted by GNATS.
>
> From: Martin Husemann <martin@duskware.de>
> To: gnats-bugs@NetBSD.org
> Cc: port-i386-maintainer@netbsd.org, gnats-admin@netbsd.org,
> netbsd-bugs@netbsd.org, Ephaeton@gmx.net
> Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
> Date: Mon, 20 Feb 2012 21:17:52 +0100
>
> On Mon, Feb 20, 2012 at 08:15:05PM +0000, Martin S. Weber wrote:
> > I just copied the compiled kernel to / and its modules to /stand/i386/6.0.
> > The mbr code and all the rest is from netbsd-5 times. I don't see anything
> > in UPDATING signaling the necessity of updating the boot code though.
>
> Oh, great - so we can rule out the boot code (which the other PR mentioned
> is about).
>
> How far do you get? No copyright banner at all? Does it display cpu type
> and/or memory info before it reboots?
Nothing. Just the first line that indicates how much it read (or its checksum
or whateverdoIknow), the line that the boot loader displays (I presume).
Regards,
>
> Martin
>
From: Matthew Mondor <mm_lists@pulsar-zone.net>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Mon, 20 Feb 2012 21:05:23 -0500
On Mon, 20 Feb 2012 21:25:03 +0000 (UTC)
"Martin S. Weber" <Ephaeton@gmx.net> wrote:
> The following reply was made to PR port-i386/46061; it has been noted by GNATS.
>
> From: "Martin S. Weber" <Ephaeton@gmx.net>
> To: gnats-bugs@NetBSD.org
> Cc:
> Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
> Date: Mon, 20 Feb 2012 15:57:32 -0500
>
> On Mon, Feb 20, 2012 at 08:20:07PM +0000, Martin Husemann wrote:
> > The following reply was made to PR port-i386/46061; it has been noted by GNATS.
> >
> > From: Martin Husemann <martin@duskware.de>
> > To: gnats-bugs@NetBSD.org
> > Cc: port-i386-maintainer@netbsd.org, gnats-admin@netbsd.org,
> > netbsd-bugs@netbsd.org, Ephaeton@gmx.net
> > Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
> > Date: Mon, 20 Feb 2012 21:17:52 +0100
> >
> > On Mon, Feb 20, 2012 at 08:15:05PM +0000, Martin S. Weber wrote:
> > > I just copied the compiled kernel to / and its modules to /stand/i386/6.0.
> > > The mbr code and all the rest is from netbsd-5 times. I don't see anything
> > > in UPDATING signaling the necessity of updating the boot code though.
> >
> > Oh, great - so we can rule out the boot code (which the other PR mentioned
> > is about).
> >
> > How far do you get? No copyright banner at all? Does it display cpu type
> > and/or memory info before it reboots?
>
> Nothing. Just the first line that indicates how much it read (or its checksum
> or whateverdoIknow), the line that the boot loader displays (I presume).
I remember having to update the boot code when starting to track
-current from a netbsd-5 system... perhaps that UPDATING is missing an
entry and that the boot code really should be updated? Just a guess...
--
Matt
From: Jukka Ruohonen <jruohonen@iki.fi>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Tue, 21 Feb 2012 08:02:29 +0200
On Mon, Feb 20, 2012 at 08:20:07PM +0000, Martin Husemann wrote:
> Oh, great - so we can rule out the boot code (which the other PR mentioned
> is about).
I don't think so: the reporter of #45851 mentions this panic happening with
the installation media.
From: David Holland <dholland-bugs@netbsd.org>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Tue, 21 Feb 2012 07:05:36 +0000
On Tue, Feb 21, 2012 at 02:10:06AM +0000, Matthew Mondor wrote:
> I remember having to update the boot code when starting to track
> -current from a netbsd-5 system... perhaps that UPDATING is missing an
> entry and that the boot code really should be updated? Just a guess...
I don't think so. My main dev box's /boot is from 2007... there was a
bootloader update but it involved the loading of modules, failure of
which should at worst leave you with "cannot mount root".
--
David A. Holland
dholland@netbsd.org
From: "Martin S. Weber" <Ephaeton@gmx.net>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Tue, 21 Feb 2012 20:08:14 -0500
More info: I successfully booted with a NetBSD 6.0/amd64 kernel off the
netbsd-6 branch of the same source date as the N6/i386 one that's failing.
I did not (have to) update the boot code to boot this kernel successfully.
I booted with "-vx" as arguments. Here's the dmesg of that successful
boot (maybe it helps shed some light?)
-Martin
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0_BETA (GENERIC) #0: Tue Feb 21 19:07:13 EST 2012
root@agamemnon.entropie.local:/space/obj-amd64/sys/arch/amd64/compile/GENERIC
total memory = 3046 MB
avail memory = 2942 MB
timecounter: Timecounters tick every 10.000 msec
No bootinfo commands at boot
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xe0010 (73 entries)
LENOVO 7658CTO (ThinkPad T61)
mainbus0 (root)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110623/tbfadt-556)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110623/tbfadt-586)
cpu0 at mainbus0 apid 0cpu0: 64 page colors
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
timecounter: Timecounter "lapic" frequency 199644492 Hz quality -100
: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, id 0x10676
cpu0: PAT enabled
cpu1 at mainbus0 apid 1cpu1: 2 page colors
x86_ipi_init: ESR 00000040
: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, id 0x10676
cpu1: PAT enabled
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2
ioapic0: remapped to apic 1
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <LENOVO,TP-7L ,00002260>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpi0: ACPI-Fast 24-bit timer
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: model number 42T5262, serial number 10603
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: using EC at acpiecdt0
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpivga0: capabilities: _DOS _DOD
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: capabilities: _BCL _BCM _BQC _DCS _DGS _DSS
acpiout0: brightness levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout1: capabilities: _DCS _DGS _DSS
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout2: capabilities: _DCS _DGS _DSS
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0: 0x0300 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
acpiwmi0 at acpi0 (WMI0, PNP0C14-NVIF): ACPI WMI Interface
acpiwmi0: {A1799AF2-9429-4529-927E-DFE13736EEBA} oid 4241 count 01 flags 02
acpiwmi0: {05901221-D566-11D1-B2F0-00A0C9062910} oid 4142 count 01 flags 00
acpiwmi0: {A1799AC3-9429-4529-927E-DFE13736EEBA} oid 00C3 count 00 flags 08
acpiwmi0: {A1799AC5-9429-4529-927E-DFE13736EEBA} oid 00C5 count 00 flags 08
acpiwmi0: {A1799ACA-9429-4529-927E-DFE13736EEBA} oid 00CA count 00 flags 08
acpiwmi0: failed to enable expensive WExx: AE_NOT_FOUND
acpiwmi0: failed to enable expensive WExx: AE_NOT_FOUND
acpiwmi0: failed to enable expensive WExx: AE_NOT_FOUND
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: polling interval 30.0 seconds
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: polling interval 30.0 seconds
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: synaptics_probe: Capabilities 0xa091.
pms0: synaptics_probe: Extended Capabilities 0x00.
pms0: Passthrough, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a00 (rev. 0x0c)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x0c)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga0pci_mem_find: void region
: Intel i965GM
i915drm0: AGP at 0xe0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured
vendor 0x8086 product 0x2a04 (miscellaneous communications, revision 0x0c) at pci0 dev 3 function 0 not configured
piixide0 at pci0 dev 3 function 2: Intel 82965PM IDE controller (rev. 0x0c)
piixide0: I/O access disabled at device
vendor 0x8086 product 0x2a07 (serial communications, interface 0x02, revision 0x0c) at pci0 dev 3 function 3 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller (rev. 0x03)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:21:86:56:09:ee
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
usb0: WARNING: power management not supported
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
usb1: WARNING: power management not supported
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
usb2: WARNING: power management not supported
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0 vendor 0x11D4 product 0x1984 nid 0x01: ADI AD1984
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
nid=12 [pin: Speaker (Built-In)]
nid=0A [audio mixer] [source: dac, record]
nid=04 [audio output] [source: dac]
nid=21 [audio selector] [source: record]
nid=20 [audio mixer] [source: record]
nid=11 [pin: HP Out (Green Jack)]
nid=07 [audio mixer] [source: dac, record]
nid=22 [audio selector] [source: dac]
nid=04 [audio output] [source: dac]
nid=21 [audio selector] [source: record]
nid=20 [audio mixer] [source: record]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
nid=1C [pin: Mic In (Red Jack)]
nid=14 [pin: Mic In (Red Jack)]
nid=15 [pin: Mic In (Built-In)]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
nid=1B [pin: SPDIF Out (Black Jack)]
nid=02 [audio output] [source: dac]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
hdvsmfg at hdaudio0 vendor 0x14F1 product 0x2BFA nid 0x02 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci2 dev 0 function 0: Atheros 5212
ath0: interrupting at ioapic0 pin 17
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: device_pmf_lock1.2379, swapper dvl_nlock 1 dvl_nwait 0 dv_flags 7
ath0: device_pmf_unlock.2406, swapper dvl_nlock 0 dvl_nwait 0 dv_flags 3f
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x03)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x2845 (rev. 0x03)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
ppb3: disabling notification events
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x03)
ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 13
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
usb3: WARNING: power management not supported
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
usb4: WARNING: power management not supported
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
usb5: WARNING: power management not supported
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
usb6: WARNING: power management not supported
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
pci6 at ppb5 bus 21
pci6: i/o space, memory space enabled
cbb0 at pci6 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
fwohci0 at pci6 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:29:65:04
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci6 dev 0 function 2: vendor 0x1180 product 0x0822 (rev. 0x21)
sdhc0: interrupting at ioapic0 pin 18
sdmmc0 at sdhc0
vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x11) at pci6 dev 0 function 3 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x11) at pci6 dev 0 function 4 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x11) at pci6 dev 0 function 5 not configured
cbb0: osock_ctrl 0x400 sock_ctrl 0x400
cbb0: wait took 0.040033s
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2811 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide1 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide1: bus-master DMA support present
piixide1: primary channel configured to compatibility mode
piixide1: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide1 channel 0
piixide1: secondary channel configured to compatibility mode
piixide1: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 0xe710ff82<CCCS,PSC,SSC,PMD,ISS=0x1=Gen1,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x32031114 rev 0x9
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 17 us, pow 250 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2101 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2100 MHz
acpicpu0: P2: FFH, lat 10 us, pow 24000 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 16000 mW, 1200 MHz
acpicpu0: P4: FFH, lat 10 us, pow 14000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 14000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 12250 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 10500 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8750 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 7000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 5250 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3500 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1750 mW, 13 %
acpicpu0: id 0, lapic id 0, cap 0x0bfd, flags 0x002aee97
acpicpu0: P-state coordination: 2 CPUs, domain 0, type HW_ALL
acpicpu0: T-state coordination: 1 CPUs, domain 0, type SW_ALL
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu1: id 1, lapic id 1, cap 0x0bfd, flags 0x002aee97
acpicpu1: P-state coordination: 2 CPUs, domain 0, type HW_ALL
acpicpu1: T-state coordination: 1 CPUs, domain 1, type SW_ALL
coretemp1 at cpu1: thermal sensor, 1 C resolution
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
Initializing SSP: f00e8ea19534081e d75ac0c75f1438a0 e2a738320785bb6d 334e82ee6248dc1d 2e530c34e14f67a2 3097b3e6622b97f0 8d86cd783d3adfd9 4941372449a4b31
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu1: TSC skew=-347508 drift=-1
TSC not known safe on this CPU
timecounter: Timecounter "TSC" frequency 2094969560 Hz quality -100
acpiacad0: AC adapter online.
acpiacad0: AC adapter connected
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-M10N, , 1.02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cpu1: running
acpicpu1: ACPI CPUs started
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0
wd0: <WDC WD5000BEKT-75KA9T0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
ehci0: handing over full speed device on port 3 to uhci1
uhub2: port 3, device disappeared after reset
uvideo0 at uhub6 port 5 configuration 1 interface 0: Chicony Electronics Co., Ltd. Integrated Camera, rev 2.00/3.20, addr 2
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev 2.00/3.20, addr 2
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
raidattach: Asked for 8 units
Kernelized RAIDframe activated
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhub7 at uhub1 port 1: Cypress Semiconductor Combi keyboard Hub ref design V1.68, class 9/0, rev 1.10/0.01, addr 2
uhub7: 3 ports with 2 removable, bus powered
uhidev0 at uhub7 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 2.00/22.00, addr 3, iclass 3/1
ums0 at uhidev0: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 2.00/22.00, addr 3, iclass 3/0
uhidev1: 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
uhidev2 at uhub7 port 3 configuration 1 interface 0
uhidev2: Solid Year product 0x2001, rev 1.10/0.01, addr 4, iclass 3/1
ukbd0 at uhidev2: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub7 port 3 configuration 1 interface 1
uhidev3: Solid Year product 0x2001, rev 1.10/0.01, addr 4, iclass 3/0
uhidev3: 2 report ids
uhid3 at uhidev3 reportid 1: input=3, output=0, feature=0
uhid4 at uhidev3 reportid 2: input=1, output=0, feature=0
From: "Martin S. Weber" <Ephaeton@gmx.net>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Thu, 29 Mar 2012 19:00:52 -0400
For the record; still an issue with netbsd-6 sources from 2012-03-28.
-Martin
From: "Martin S. Weber" <Ephaeton@gmx.net>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Tue, 1 May 2012 12:17:46 -0400
I _believe_ now that this is due to a dying HD.
I need to test 6.0 BETA on this box from a CD and get back to you on
that theory.
(what makes me believe that now all of a sudden? My previously working
system stopped working without me doing anything. Copying the working
kernel onto different blocks and booting that 'ressurrected' the system.)
From: "Martin S. Weber" <Ephaeton@gmx.net>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Sun, 15 Jul 2012 13:29:13 -0400
Some more data points:
1) a netbsd-6 i386 kernel from friday's sources still instantly reboots
the box after displaying the numbers (stuff read) before the copy right
message appears. I.e., state remains broken.
2) booting from CDROM doesn't make a difference. Still instant reboot.
3) a netbsd-6 amd64 kernel from friday's sources boots fine.
Ergo: I will change this box to become an amd64 installation, and no
longer be affected by this bug. If you make changes that you guess
might influence this behaviour, let me know. I'm willing to give i386
some more tries (well, at least booting. I'm not going to install back
to i386 once I've transitioned to amd64).
Regards,
-Martin
From: David Holland <dholland-bugs@netbsd.org>
To: gnats-bugs@NetBSD.org
Cc:
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Mon, 3 Sep 2012 16:50:36 +0000
On Sun, Jul 15, 2012 at 05:30:06PM +0000, Martin S. Weber wrote:
> Some more data points:
>
> 1) a netbsd-6 i386 kernel from friday's sources still instantly reboots
> the box after displaying the numbers (stuff read) before the copy right
> message appears. I.e., state remains broken.
>
> 2) booting from CDROM doesn't make a difference. Still instant reboot.
>
> 3) a netbsd-6 amd64 kernel from friday's sources boots fine.
>
> Ergo: I will change this box to become an amd64 installation, and no
> longer be affected by this bug. If you make changes that you guess
> might influence this behaviour, let me know. I'm willing to give i386
> some more tries (well, at least booting. I'm not going to install back
> to i386 once I've transitioned to amd64).
This is likely the same as 46885 and therefore probably fixed on HEAD
(with pullup to -6 on the way) -- please give it a try when time
permits.
--
David A. Holland
dholland@netbsd.org
State-Changed-From-To: open->feedback
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Mon, 03 Sep 2012 17:04:44 +0000
State-Changed-Why:
.
State-Changed-From-To: feedback->closed
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Sat, 20 May 2017 19:27:07 +0000
State-Changed-Why:
Believed to be the same as 46885, which was fixed a long time back.
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.
Home