NetBSD Problem Report #46916

From www@NetBSD.org  Thu Sep  6 14:42:04 2012
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [149.20.53.66])
	by www.NetBSD.org (Postfix) with ESMTP id 992D963BD00
	for <gnats-bugs@gnats.NetBSD.org>; Thu,  6 Sep 2012 14:42:04 +0000 (UTC)
Message-Id: <20120906144202.ADCC963B9BC@www.NetBSD.org>
Date: Thu,  6 Sep 2012 14:42:02 +0000 (UTC)
From: tobias@iso100.se
Reply-To: tobias@iso100.se
To: gnats-bugs@NetBSD.org
Subject: Wireless network adapter is not recognized (not configured)
X-Send-Pr-Version: www-1.0

>Number:         46916
>Category:       port-i386
>Synopsis:       Wireless network adapter is not recognized (not configured)
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Sep 06 14:45:00 +0000 2012
>Last-Modified:  Thu Sep 06 17:10:02 +0000 2012
>Originator:     Tobias Åström
>Release:        NetBSD 6.0_RC1
>Organization:
>Environment:
NetBSD darthmaul 6.0_RC1 NetBSD 6.0_RC1 (GENERIC) i386
>Description:
Wireless network adapter is not recognized and can't be used.

darthmaul$ cat /var/run/dmesg.boot                                             
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_RC1 (GENERIC)
total memory = 2810 MB
avail memory = 2751 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Pavilion dm1 Notebook PC (0596110000243200110320100)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Athlon(tm) II Neo K125 Processor, id 0x100f63
cpu0: SVM disabled by the BIOS
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000003>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
MEMR (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
acpiout2 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout2: brightness levels: 0 10 20 30 40 50 60 70 80 90 100
acpiout3 at acpivga0 (HDMI, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout2): LCD Panel, head 0, bios detect
acpivga0:   0x0200 (acpiout1): TV, head 0, bios detect
acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0, bios detect
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, AUI1101) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
ACEL (HPQ0004) at acpi0 not configured
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A): ACPI Battery
acpibat0: Hewlett-Packard LION rechargeable battery
acpibat0: granularity: low->warn 0.010 Ah, warn->full 0.025 Ah
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
acpitz0 at acpi0 (THRM): cpu0
acpitz0: levels: hot 100.0 C, passive 95.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: vendor 0x1002 product 0x9712 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga1: ATI Radeon Mobility HD 4200
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 5 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI RS690/780 HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz PCM16 AC3
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 1.20, 1 ports, 32 slots, CAP 0xf732ff00<PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x42)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Sigmatel 92HD81B1X5
hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg1: ADC01 2ch: Mic In [Jack]
hdafg1: ADC02 2ch: Mic In [Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x40)
ppb1 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ohci2 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ppb2 at pci0 dev 21 function 0: vendor 0x1002 product 0x43a0 (rev. 0x00)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address 60:eb:69:75:e0:6d
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb3 at pci0 dev 21 function 1: vendor 0x1002 product 0x43a1 (rev. 0x00)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 9
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x14e4 product 0x4727 (miscellaneous network, revision 0x01) at pci4 dev 0 function 0 not configured
ohci3 at pci0 dev 22 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb5 at ohci3: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: BIOS has given up ownership
ehci2: EHCI version 1.0
ehci2: companion controller, 4 ports each: ohci3
usb6 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1203 (rev. 0x00)
amdtemp0 at pchb4: AMD CPU Temperature Sensors (Family10h)
pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  9020 mW, 1700 MHz
acpicpu0: P1: FFH, lat   4 us, pow  6281 mW, 1300 MHz
acpicpu0: P2: FFH, lat   4 us, pow  3575 mW,  800 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1696449570 Hz quality 3000
acpiacad0: AC adapter offline.
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb1: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
uhub6 at usb6: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: <KINGSTON SVP200S360G>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uvideo0 at uhub1 port 4 configuration 1 interface 0: SuYin HP Webcam-50, rev 2.00/2.00, addr 2
video0 at uvideo0: SuYin HP Webcam-50, rev 2.00/2.00, addr 2
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ubt0 at uhub2 port 1
ubt0: Broadcom Corp Broadcom 2070 Bluetooth, rev 2.00/4.81, addr 2
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Run NetBSD 6rc1 on HP Pavilion dm1
>Fix:

>Audit-Trail:
From: Robert Elz <kre@munnari.OZ.AU>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: port-i386/46916: Wireless network adapter is not recognized (not configured)
Date: Thu, 06 Sep 2012 23:28:49 +0700

     Date:        Thu,  6 Sep 2012 14:45:00 +0000 (UTC)
     From:        tobias@iso100.se
     Message-ID:  <20120906144500.8432A63BD00@www.NetBSD.org>

   | vendor 0x14e4 product 0x4727 (miscellaneous network, revision 0x01) at pci4 dev 0 function 0 not configured

 14e4 is Broadcom for which doc on chipsets (and particularly the
 wireless stuff) is apparently very hard to get.

 The chances of a driver for that one (unless you can make a ndis derived
 driver from windows work) are probably not high anytime soon.

 kre

From: Ryo ONODERA <ryo_on@yk.rim.or.jp>
To: gnats-bugs@NetBSD.org, tobias@iso100.se
Cc: 
Subject: Re: port-i386/46916: Wireless network adapter is not recognized
 (not configured)
Date: Fri, 07 Sep 2012 02:05:27 +0900 (JST)

 Hi,

 From http://wireless.kernel.org/en/users/Drivers/brcm80211 ,
 Product 0x4727 is Broadcom BCM4313 chip.
 And Linux's brcmsmac driver is released under MIT like license
 from Broadcom.

 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=tree;f=drivers/net/wireless/brcm80211/brcmsmac;h=fc5469628b8279b5fe22a618623437ab214d8b5f;hb=HEAD

 By the way, it seems that this PR is duplicate of PR/44614,
 http://gnats.netbsd.org/44614 .

 --
 Ryo ONODERA // ryo_on@yk.rim.or.jp
 PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2014 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.