NetBSD Problem Report #47016

From www@NetBSD.org  Sat Sep 29 09:43:20 2012
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [149.20.53.66])
	by www.NetBSD.org (Postfix) with ESMTP id D72E763E46D
	for <gnats-bugs@gnats.NetBSD.org>; Sat, 29 Sep 2012 09:43:20 +0000 (UTC)
Message-Id: <20120929094318.8826863D798@www.NetBSD.org>
Date: Sat, 29 Sep 2012 09:43:18 +0000 (UTC)
From: qfh02545@nifty.com
Reply-To: qfh02545@nifty.com
To: gnats-bugs@NetBSD.org
Subject: SCI interrupt storm
X-Send-Pr-Version: www-1.0

>Number:         47016
>Category:       port-amd64
>Synopsis:       SCI interrupt storm
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    chs
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Sep 29 09:45:01 +0000 2012
>Closed-Date:    Fri Aug 11 06:33:11 +0000 2017
>Last-Modified:  Fri Aug 11 06:33:11 +0000 2017
>Originator:     HITOSHI OSADA
>Release:        NetBSD-current (20120929)
>Organization:
>Environment:
NetBSD amd785g 6.99.11 NetBSD 6.99.11 (GENERIC) #0: Sat Sep 29 18:05:23 JST 2012  that@amd785g:/NetBSD-obj/src-obj-that/sys/arch/amd64/compile/GENERIC amd64

>Description:
SCI interrupt strom occured at very recent kernel.
The kernel build around Sep 9 has no problem.

vmstat -e:

event                                         total     rate type
bus_dma loads                                  5166       12 misc
bus_dma nbouncebufs                              45        0 misc
vmcmd kills                                     295        0 misc
vmcmd extends                                    28        0 misc
vmcmd calls                                    2546        5 misc
vmemev bt_inuse                                 552        1 misc
vmemev bt_count                                 638        1 misc
vmemev bt_pages                                   6        0 misc
TLB shootdown                                  4153        9 intr
cpu0 runqueue pull                               29        0 misc
cpu0 runqueue push                               38        0 misc
cpu0 runqueue stay                             6241       14 misc
cpu0 runqueue localize                          438        1 misc
softint net/0                                   381        0 misc
softint net block/0                               1        0 misc
softint bio/0                                  5023       11 misc
softint bio block/0                               7        0 misc
softint clk/0                                  7315       17 misc
softint ser/0                                     7        0 misc
callout late/0                                    3        0 misc
crosscall unicast                                 6        0 misc
crosscall broadcast                              84        0 misc
namecache entries collected                    2299        5 misc
namecache under scan target                     430        1 misc
cpu0 timer                                    42872      100 intr
cpu0 MTRR update IPI                              7        0 misc
cpu1 runqueue pull                                9        0 misc
cpu1 runqueue push                               88        0 misc
cpu1 runqueue stay                             5941       13 misc
cpu1 runqueue localize                          850        1 misc
softint net/1                                     2        0 misc
softint net block/1                               2        0 misc
softint clk/1                                  2909        6 misc
cpu1 timer                                    42872      100 misc
cpu1 FPU synch IPI                                2        0 misc
cpu1 MTRR update IPI                              9        0 misc
ioapic0 pin 9                              69124265   161505 intr
ioapic0 pin 1                                  1030        2 intr
ioapic0 pin 18                                  442        1 intr
ioapic0 pin 22                                 4834       11 intr
ioapic0 pin 16                                   52        0 intr
ioapic0 pin 17                                    1        0 intr
ioapic0 pin 4                                     8        0 intr
acpicpu0 C1 (HALT)                         33924519    79262 misc
acpicpu0 P0 (3000 MHz)                           40        0 misc
acpicpu0 P1 (2300 MHz)                           10        0 misc
acpicpu0 P2 (1800 MHz)                           10        0 misc
acpicpu0 P3 (800 MHz)                            20        0 misc
acpicpu1 C1 (HALT)                            49794      116 misc
acpicpu1 P0 (3000 MHz)                           40        0 misc
acpicpu1 P1 (2300 MHz)                           10        0 misc
acpicpu1 P2 (1800 MHz)                           10        0 misc
acpicpu1 P3 (800 MHz)                            20        0 misc
kpreempt defer: kernel_lock                       1        0 misc
kpreempt immediate                                7        0 misc

dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.11 (GENERIC) #0: Sat Sep 29 18:05:23 JST 2012
	that@amd785g:/NetBSD-obj/src-obj-that/sys/arch/amd64/compile/GENERIC
total memory = 3838 MB
avail memory = 3710 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-586)
cpu0 at mainbus0 apid 0: AMD Athlon(tm) II X2 250 Processor, id 0x100f62
cpu1 at mainbus0 apid 1: AMD Athlon(tm) II X2 250 Processor, id 0x100f62
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <042010,RSDT1216,20100420>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
BROD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
OMSC (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
UAR1 (PNP0501) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1849 product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x9710 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon HD 4200
radeondrm0: Initialized radeon 1.29.0 20080613
ppb1 at pci0 dev 10 function 0: vendor 0x1022 product 0x9609 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x03)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 00:19:66:ef:3d:71
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 6 ports, 32 slots, CAP 0xf722ff85<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x3c)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus6 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus7 at ixpide0 channel 1
hdaudio0 at pci0 dev 20 function 2: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: Realtek ALC888
hdafg0: DAC00 8ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack & Built-In]
hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg0: ADC04 2ch: Mic In [Jack]
hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)
ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow 30375 mW, 3000 MHz
acpicpu0: P1: FFH, lat   4 us, pow 25500 mW, 2300 MHz
acpicpu0: P2: FFH, lat   4 us, pow 21735 mW, 1800 MHz
acpicpu0: P3: FFH, lat   4 us, pow  7900 mW,  800 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2993507660 Hz quality 3000
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
uhub6 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ehci0: handing over low speed device on port 6 to ohci1
wd0 at atabus0 drive 0
wd0: <INTEL SSDSA2M080G2GC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD10EADS-00L5B1>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <WDC WD10EACS-00ZJB0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
warning: no /dev/console
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Logitech USB Trackball, rev 1.10/14.00, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons
wsmouse0 at ums0 mux 0
cprng sysctl: WARNING pseudorandom rekeying.
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)



>How-To-Repeat:

>Fix:

>Release-Note:

>Audit-Trail:

Responsible-Changed-From-To: port-amd64-maintainer->chs
Responsible-Changed-By: chs@NetBSD.org
Responsible-Changed-When: Sat, 29 Sep 2012 18:27:27 +0000
Responsible-Changed-Why:
must be due to my recent changes.


From: "Chuck Silvers" <chs@netbsd.org>
To: gnats-bugs@gnats.NetBSD.org
Cc: 
Subject: PR/47016 CVS commit: src/sys/arch/x86/x86
Date: Wed, 3 Oct 2012 17:04:25 +0000

 Module Name:	src
 Committed By:	chs
 Date:		Wed Oct  3 17:04:25 UTC 2012

 Modified Files:
 	src/sys/arch/x86/x86: mpacpi.c

 Log Message:
 as a workaround for PR 47016, call ioapic_reenable() at the end of
 ACPI interrupt routing to fix the settings for the SCI interrupt.
 the problem is that after my recent changes, the SCI handler is
 installed before the MADT info is parsed, so we don't know what
 polarity it should have.  the real fix for this will be to rearrange
 the ACPI initialization so that everything is done in a more sensible
 order, but that will take some more time.


 To generate a diff of this commit:
 cvs rdiff -u -r1.95 -r1.96 src/sys/arch/x86/x86/mpacpi.c

 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.

From: "Jeff Rizzo" <riz@netbsd.org>
To: gnats-bugs@gnats.NetBSD.org
Cc: 
Subject: PR/47016 CVS commit: [netbsd-6] src/sys
Date: Thu, 22 Nov 2012 00:39:01 +0000

 Module Name:	src
 Committed By:	riz
 Date:		Thu Nov 22 00:39:01 UTC 2012

 Modified Files:
 	src/sys/arch/ia64/acpi [netbsd-6]: acpi_machdep.c
 	src/sys/arch/ia64/include [netbsd-6]: acpi_machdep.h
 	src/sys/arch/x86/acpi [netbsd-6]: acpi_machdep.c
 	src/sys/arch/x86/include [netbsd-6]: acpi_machdep.h
 	src/sys/arch/x86/x86 [netbsd-6]: mpacpi.c
 	src/sys/dev/acpi [netbsd-6]: acpi.c

 Log Message:
 Pull up following revision(s) (requested by chs in ticket #683):
 	sys/arch/ia64/include/acpi_machdep.h: revision 1.6
 	sys/arch/x86/include/acpi_machdep.h: revision 1.11
 	sys/dev/acpi/acpi.c: revision 1.255
 	sys/arch/x86/acpi/acpi_machdep.c: revision 1.4
 	sys/arch/x86/x86/mpacpi.c: revision 1.95
 	sys/arch/x86/x86/mpacpi.c: revision 1.96
 	sys/arch/ia64/acpi/acpi_machdep.c: revision 1.6
 locate PCI buses and determine their bus numbers using the info
 previously extracted from ACPICA rather than trying to figure it out again.
 allow PCI buses that don't have a _PRT method.
 as a workaround for PR 47016, call ioapic_reenable() at the end of
 ACPI interrupt routing to fix the settings for the SCI interrupt.
 the problem is that after my recent changes, the SCI handler is
 installed before the MADT info is parsed, so we don't know what
 polarity it should have.  the real fix for this will be to rearrange
 the ACPI initialization so that everything is done in a more sensible
 order, but that will take some more time.


 To generate a diff of this commit:
 cvs rdiff -u -r1.5 -r1.5.8.1 src/sys/arch/ia64/acpi/acpi_machdep.c
 cvs rdiff -u -r1.5 -r1.5.8.1 src/sys/arch/ia64/include/acpi_machdep.h
 cvs rdiff -u -r1.3 -r1.3.2.1 src/sys/arch/x86/acpi/acpi_machdep.c
 cvs rdiff -u -r1.10 -r1.10.8.1 src/sys/arch/x86/include/acpi_machdep.h
 cvs rdiff -u -r1.92 -r1.92.8.1 src/sys/arch/x86/x86/mpacpi.c
 cvs rdiff -u -r1.252 -r1.252.6.1 src/sys/dev/acpi/acpi.c

 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.

From: "Chuck Silvers" <chs@netbsd.org>
To: gnats-bugs@gnats.NetBSD.org
Cc: 
Subject: PR/47016 CVS commit: src/sys/arch/x86/acpi
Date: Sun, 31 Mar 2013 19:34:25 +0000

 Module Name:	src
 Committed By:	chs
 Date:		Sun Mar 31 19:34:25 UTC 2013

 Modified Files:
 	src/sys/arch/x86/acpi: acpi_machdep.c

 Log Message:
 yet more fixes for PR 47648 / PR 47016:
 when using a temporary mp_intr_map, initialize the "flags" field
 as well as "redir" since apic_set_redir() uses both.  fix how
 the flags field is change when applying an override, the trigger
 and polarity sub-fields aren't just one bit like they are in redir.


 To generate a diff of this commit:
 cvs rdiff -u -r1.5 -r1.6 src/sys/arch/x86/acpi/acpi_machdep.c

 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.

From: "Jeff Rizzo" <riz@netbsd.org>
To: gnats-bugs@gnats.NetBSD.org
Cc: 
Subject: PR/47016 CVS commit: [netbsd-6] src/sys/arch/x86
Date: Sun, 31 Mar 2013 20:32:02 +0000

 Module Name:	src
 Committed By:	riz
 Date:		Sun Mar 31 20:32:01 UTC 2013

 Modified Files:
 	src/sys/arch/x86/acpi [netbsd-6]: acpi_machdep.c
 	src/sys/arch/x86/x86 [netbsd-6]: mpacpi.c

 Log Message:
 Pull up following revision(s) (requested by chs in ticket #855):
 	sys/arch/x86/acpi/acpi_machdep.c: revision 1.5
 	sys/arch/x86/acpi/acpi_machdep.c: revision 1.6
 	sys/arch/x86/x86/mpacpi.c: revision 1.97
 redo the ACPI interrupt handler setup again, this time handling
 MADT overrides that change the pin as well as the polarity.
 fixes PR 47648.
 yet more fixes for PR 47648 / PR 47016:
 when using a temporary mp_intr_map, initialize the "flags" field
 as well as "redir" since apic_set_redir() uses both.  fix how
 the flags field is change when applying an override, the trigger
 and polarity sub-fields aren't just one bit like they are in redir.


 To generate a diff of this commit:
 cvs rdiff -u -r1.3.2.1 -r1.3.2.2 src/sys/arch/x86/acpi/acpi_machdep.c
 cvs rdiff -u -r1.92.8.1 -r1.92.8.2 src/sys/arch/x86/x86/mpacpi.c

 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.

State-Changed-From-To: open->closed
State-Changed-By: maxv@NetBSD.org
State-Changed-When: Fri, 11 Aug 2017 06:33:11 +0000
State-Changed-Why:
This issue was fixed, I'm closing this PR.


>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2014 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.