NetBSD Problem Report #47438

From www@NetBSD.org  Sat Jan 12 21:51:34 2013
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [149.20.53.66])
	by www.NetBSD.org (Postfix) with ESMTP id 7F65C63D7B3
	for <gnats-bugs@gnats.NetBSD.org>; Sat, 12 Jan 2013 21:51:34 +0000 (UTC)
Message-Id: <20130112215131.7892B63D7B3@www.NetBSD.org>
Date: Sat, 12 Jan 2013 21:51:31 +0000 (UTC)
From: John.P.Darrow@gmail.com
Reply-To: John.P.Darrow@gmail.com
To: gnats-bugs@NetBSD.org
Subject: boot hangs after acpi0 on HP dv7-3060us notebook
X-Send-Pr-Version: www-1.0

>Number:         47438
>Category:       kern
>Synopsis:       boot hangs after acpi0 on HP dv7-3060us notebook
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    chs
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Jan 12 21:55:00 +0000 2013
>Closed-Date:    Fri Sep 30 08:28:36 +0000 2016
>Last-Modified:  Fri Sep 30 08:28:36 +0000 2016
>Originator:     John Darrow
>Release:        NetBSD 6.0.1
>Organization:
quite lacking
>Environment:
unavailable
>Description:
When booting with acpi enabled, the kernel hangs after:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0.1 (GENERIC)
total memory = 4092 MB
avail memory = 3958 MB
RTC BIOS diagnostic error 0x80<clock_battery>
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Turion(tm) II Ultra Dual-Core Mobile M600, id 0x100f62
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1: AMD Turion(tm) II Ultra Dual-Core Mobile M600, id 0x100f62
ipapic0 at mainbus0 apid 4
acpi0 at mainbus0: Intel ACPICA 20110623
[ hang here ]

Booting with -v gets a little more:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0.1 (GENERIC)
total memory = 4092 MB
avail memory = 3958 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Pavilion dv7 Notebook PC (039F200000241210000020000)
mainbus0 (root)
cpu0 at mainbus0 apid 0timecounter: Timecounter "lapic" frequency 200169680 Hz quality -100
: AMD Turion(tm) II Ultra Dual-Core Mobile M600, id 0x100f62
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1: AMD Turion(tm) II Ultra Dual-Core Mobile M600, id 0x100f62
ipapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000003>, AslId <    ,01000013>

Using the "disable ACPI" option allows it to boot:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0.1 (GENERIC)
total memory = 4092 MB
avail memory = 3958 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Pavilion dv7 Notebook PC (039F200000241210000020000)
mainbus0 (root)
cpu0 at mainbus0: AMD Turion(tm) II Ultra Dual-Core Mobile M600, id 0x100f62
cpu0: SVM disabled by the BIOS
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 2 function 0: vendor 0x1022 product 0x9603 (rev. 0x00)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x9553 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Mobility Radeon 4500 Series
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at irq 7
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
ppb1 at pci0 dev 4 function 0: vendor 0x1022 product 0x9604 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 5 function 0: vendor 0x1022 product 0x9605 (rev. 0x00)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 8
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0: Atheros 9280
ath0: interrupting at irq 5
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 128.2 phy 13.0 radio 12.0
ppb3 at pci0 dev 6 function 0: vendor 0x1022 product 0x9606 (rev. 0x00)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 9
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x03)
re0: interrupting at irq 10
re0: Ethernet address 00:26:9e:7e:26:94
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci0 dev 10 function 0: vendor 0x1022 product 0x9609 (rev. 0x00)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 10
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
fwohci0 at pci5 dev 0 function 0: vendor 0x197b product 0x2380 (rev. 0x00)
fwohci0: interrupting at irq 10
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:6c:c0:a4:01
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=100, retry=100
fwohci0: fwphy_rddata: 0x2 loop=100, retry=100
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=100, retry=100
fwohci0: fwphy_rddata: 0x1 loop=100, retry=100
vendor 0x197b product 0x2382 (miscellaneous system) at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2: vendor 0x197b product 0x2381 (rev. 0x00)
sdhc0: interrupting at irq 10
sdmmc0 at sdhc0
vendor 0x197b product 0x2383 (miscellaneous system) at pci5 dev 0 function 3 not configured
vendor 0x197b product 0x2384 (miscellaneous system) at pci5 dev 0 function 4 not configured
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
ahcisata0: interrupting at irq 11
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 0xf722ffa2<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at irq 4
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at irq 4
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at irq 5
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at irq 10
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at irq 10
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at irq 7
ehci1: dropped intr workaround enabled
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x3c)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at irq 14
atabus3 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at irq 15
atabus4 at ixpide0 channel 1
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at irq 4
hdafg1 at hdaudio1: Sigmatel 92HD75B3X5
hdafg1: DAC00 2ch: Speaker [Built-In]
hdafg1: ADC01 2ch: Mic In [Jack]
hdafg1: DAC02 2ch: Speaker [Jack]
hdafg1: ADC03 2ch: Mic In [Built-In]
hdafg1: DIG04 2ch: SPDIF Out [Jack]
hdafg1: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
hdvsmfg at hdaudio1 not configured
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)
ppb5 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci6 at ppb5 bus 11
pci6: i/o space, memory space enabled
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1203 (rev. 0x00)
amdtemp0 at pchb4: AMD CPU Temperature Sensors (Family10h)
pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2394861890 Hz quality 3000
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <ST9500420AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp       DVDRAM GT20L, KWJA3F14414, DC05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2: device problem, disabling port 3
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: cd0
cd0(ahcisata0:1:0):  Check Condition on CDB: 0x43 00 00 00 00 00 00 00 0c 40
    SENSE KEY:  Illegal Request
 COMMAND INFO:  1124073600 (0x43000080)
     ASC/ASCQ:  Illegal Field in CDB
         SKSV:  Error in CDB, Offset 2

root on cd0a dumps on cd0b
root file system type: cd9660
warning: no /dev/console

Oddly enough, I have a saved dmesg from some point back when I booted a 5.99.22 install CD, and it got through acpi just fine; however, trying the exact same 5.99.22 CD again today hangs at the same place as 6.0.1.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.22 (INSTALL) #0: Thu Nov 26 19:39:32 UTC 2009
        builds@b8.netbsd.org:/home/builds/ab/HEAD/amd64/200911270000Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/INSTALL
total memory = 4092 MB
avail memory = 3948 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Pavilion dv7 Notebook PC (039F200000241210000020000)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2394MHz, id 0x100f62
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1: AMD 686-class, 2394MHz, id 0x100f62
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20090730
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000003>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1E0A) (aux port): irq 12
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
CIR (ENE0100) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A): ACPI Battery (Control Method)
acpibat0: battery info: Hewlett-Packard, LION, Primary
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
ACEL (HPQ0004) at acpi0 not configured
acpitz0 at acpi0 (THRM): hot 100.0C passive 62.0C, passive cooling
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 2 function 0: vendor 0x1022 product 0x9603 (rev. 0x00)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x9553 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0 vendor 0x1002 product 0xAA01 nid 0x01 (firmware configuration)
hdafg0: DAC0:02, Digital Digital Other Out: Jack (Unknown, 03)
hdafg0: 2ch/0ch 32000Hz-48000Hz 16/16
audio0 at hdafg0: half duplex, playback
ppb1 at pci0 dev 4 function 0: vendor 0x1022 product 0x9604 (rev. 0x00)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 5 function 0: vendor 0x1022 product 0x9605 (rev. 0x00)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 8
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x168c product 0x002a (miscellaneous network, revision 0x01) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 6 function 0: vendor 0x1022 product 0x9606 (rev. 0x00)
ppb3: unsupported PCI Express version
pci4 at ppb3 bus 9
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x03)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 00:26:9e:7e:26:94
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci0 dev 10 function 0: vendor 0x1022 product 0x9609 (rev. 0x00)
ppb4: unsupported PCI Express version
pci5 at ppb4 bus 10
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xf722e0a0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0
piixpm0: vendor 0x1002 product 0x4385 (rev. 0x3c)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1 vendor 0x111D product 0x7603 nid 0x01 (firmware configuration)
hdafg1: disable assoc 2 (5) [trace failed]
hdafg1:   assoc 2 pin0: 18
hdafg1: ADC0:13, Analog Mic In: Jack (Black, 0B)
hdafg1: DAC1:10, Analog Speaker: Jack (Green, 0F)
hdafg1: DAC3:11, Digital SPDIF Out: Jack (Black, 1E)
hdafg1: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32
audio1 at hdafg1: full duplex, playback, capture, independent
hdvsmfg at hdaudio1 vendor 0x11C1 product 0x1040 nid 0x01 not configured
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)
ppb5 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci6 at ppb5 bus 11
pci6: i/o space, memory space enabled
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2394028320 Hz quality 3000
acpiacad0: AC adapter online.
acpitz_get_limits: units: 1
acpitz_get_limits: units: 0
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <ST9500420AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp       DVDRAM GT20L, KWC9AUI5703, DC05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uvideo0 at uhub2 port 3 configuration 1 interface 0: QCM HP Webcam, rev 2.00/1.02, addr 2
video0 at uvideo0: QCM HP Webcam, rev 2.00/1.02, addr 2
Kernelized RAIDframe activated
md0: internal 5000 KB image area
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
boot device: cd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console

I don't know if this issue is related to kern/47290
>How-To-Repeat:
Boot install CD on laptop, see system hang.
>Fix:

>Release-Note:

>Audit-Trail:

Responsible-Changed-From-To: kern-bug-people->chs
Responsible-Changed-By: chs@NetBSD.org
Responsible-Changed-When: Wed, 03 Apr 2013 15:17:26 +0000
Responsible-Changed-Why:
I've been working on ACPI lately.


State-Changed-From-To: open->feedback
State-Changed-By: chs@NetBSD.org
State-Changed-When: Wed, 03 Apr 2013 15:17:26 +0000
State-Changed-Why:
I've made a number of changes in ACPI in -current lately, could you try a -current kernel?


From: "Kai-Uwe Eckhardt" <kuehro@gmx.de>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: kern/47438 boot hangs after acpi0 on HP dv7-3060us notebook
Date: Tue, 28 May 2013 20:22:56 +0200 (CEST)

 The same problem appeared on my Athlon II X4 with ACPICA 20110623.
 I was able to boot by setting BIOS option 'HPET table' to 'on'.
 This is the high precision event timer (hpet0 at acpi0).

 Good luck,

 Kai-Uwe

State-Changed-From-To: feedback->closed
State-Changed-By: dholland@NetBSD.org
State-Changed-When: Fri, 30 Sep 2016 08:28:36 +0000
State-Changed-Why:
feedback timeout, and problems with acpica from 2013 are not going to be
relevant now


>Unformatted:

Home	PR Database Search