NetBSD Problem Report #48891
From www@NetBSD.org Tue Jun 10 15:02:36 2014
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [149.20.53.66])
by mollari.NetBSD.org (Postfix) with ESMTP id F3122A6517
for <gnats-bugs@gnats.NetBSD.org>; Tue, 10 Jun 2014 15:02:35 +0000 (UTC)
Message-Id: <20140610150234.85531A653D@mollari.NetBSD.org>
Date: Tue, 10 Jun 2014 15:02:34 +0000 (UTC)
From: jlhouchin@gmail.com
Reply-To: jlhouchin@gmail.com
To: gnats-bugs@NetBSD.org
Subject: iwn Intel Centrino Wireless-N 1030 not working
X-Send-Pr-Version: www-1.0
>Number: 48891
>Category: kern
>Synopsis: iwn Intel Centrino Wireless-N 1030 not working
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Tue Jun 10 15:05:00 +0000 2014
>Originator: Jimmie Houchin
>Release: 6.1.4 AMD64
>Organization:
>Environment:
NetBSD 6.1.4 GENERIC amd64
>Description:
During and after installation iwn0 did not work.
After installation I plugged in an ethernet cable and installed iwn-firmware-4.44.1.20. I configured rc.conf and wpa_supplicant.conf.
Nothing changed from any of the previous errors which were as follows.
iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: cannot assign link-local address
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013688
source line = 0x0000012F
error data = 0x00000001000000A4
branch link = 0x0001367C0001367C
interrupt link = 0x0000C17A00000000
time = 28083
dmesg says:
iwn0 at pci3 dev 0 function 0: vendor 0x8086 product 0x008a (rev. 0x34)
iwn0: interrupting at ioapic0 pin 19
iwn0: MIMO 1T2R, BGN, address MY_MAC_ADDRESS
iwn0: 11b rates: 1Mbps 3Mbps 5.5Mbps 11Mbps
iwn0: llg rates: 1Mbps 3Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ifconfig iwn0
iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ssid=""
powersave off
address MY_MAC_ADDRESS
media: IEEE802.11 autoselect
status: no network
My laptop is an HP Pavilion M7. The wireless nic came from a previous Dell.
Thanks.
>How-To-Repeat:
I have installed a few times. I have never gotten it to work during or after any install.
>Fix:
(Contact us)
$NetBSD: query-full-pr,v 1.39 2013/11/01 18:47:49 spz Exp $
$NetBSD: gnats_config.sh,v 1.8 2006/05/07 09:23:38 tsutsui Exp $
Copyright © 1994-2007
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.