NetBSD Problem Report #53466
From www@NetBSD.org Mon Jul 23 16:11:42 2018
Return-Path: <www@NetBSD.org>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
by mollari.NetBSD.org (Postfix) with ESMTPS id 283A97A1B3
for <gnats-bugs@gnats.NetBSD.org>; Mon, 23 Jul 2018 16:11:42 +0000 (UTC)
Message-Id: <20180723161139.9FA617A1ED@mollari.NetBSD.org>
Date: Mon, 23 Jul 2018 16:11:39 +0000 (UTC)
From: mayuresh@acm.org
Reply-To: mayuresh@acm.org
To: gnats-bugs@NetBSD.org
Subject: Android DomU booAndroid DomU boots but hangs with qemu-dm showing 90+ cpu usage on dom0ts but hangs with qemu-dm showing 90+ cpu usage on dom0
X-Send-Pr-Version: www-1.0
>Number: 53466
>Category: port-xen
>Synopsis: Android DomU boots but hangs with qemu-dm showing 90+ cpu usage on dom0
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-xen-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Mon Jul 23 16:15:00 +0000 2018
>Last-Modified: Fri Jul 17 11:22:09 +0000 2020
>Originator: Mayuresh
>Release: 8.0_RC1
>Organization:
>Environment:
NetBSD hpnetbsd 8.0_RC1 NetBSD 8.0_RC1 (XEN3_DOM0) #0: Fri Jul 13 22:36:36 IST 2018 root@localhost:/usr/src/sys/arch/amd64/compile/XEN3_DOM0 amd64
>Description:
I am able to get android x86 boot as HVM DomU (though ideally would like
it as PV, but not yet able to achieve that.)
The configuration is
builder = 'hvm'
memory = '2000'
disk=['phy:/dev/rsd1,xvda,w']
name = 'android'
boot = 'c'
vnc = 1
usb = 1
vcpus = 3
usbdevice = [ 'tablet' ]
stdvga=1
videoram=32
At rsd1 I have a USB stick which boots and works find independently,
though not through xen.
It boots and after grub dialogue, it hangs at "detecting android-x86 ...
found at /dev/sda1" with Dom0 showing near 100% cpu usage for qemu-dm.
I have also tried a raw disk image with file:/, but it leads to the same
issue.
qemu-dm-android.log
===================
domid: 1
Using xvda for guest's hda
Strip off blktap sub-type prefix to /dev/rsd1 (drv 'aio')
Using file /dev/rsd1 in read-write mode
Watching device-model/1/logdirty/cmd
Watching device-model/1/command
Watching /local/domain/1/cpu
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 85b12e3e-bc7a-4796-9447-c1d7004f2a28
xen be core: xen be core: can't open gnttab device
can't open gnttab device
xen be core: xen be core: can't open gnttab device
can't open gnttab device
The stdvga/VBE device model has no use for more than 16 Megs of vram. Video ram set to 16M.
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(): vncpasswd get error. /vm/85b12e3e-bc7a-4796-9447-c1d7004f2a28/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
[xenstore_process_vcpu_set_event]: /local/domain/1/cpu has no CPU!
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/1/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
vga s->lfb_addr = f0000000 s->lfb_end = f1000000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
vga s->lfb_addr = f0000000 s->lfb_end = f1000000
vga s->lfb_addr = f0000000 s->lfb_end = f1000000
vga s->lfb_addr = f0000000 s->lfb_end = f1000000
vga s->lfb_addr = f0000000 s->lfb_end = f1000000
vga s->lfb_addr = f0000000 s->lfb_end = f1000000
vga s->lfb_addr = f0000000 s->lfb_end = f1000000
vga s->lfb_addr = f0000000 s->lfb_end = f1000000
xl-android.log
==============
Waiting for domain android (domid 1) to die [pid 331]
xl dmesg
========
Xen 4.8.3nb0
(XEN) Xen version 4.8.3nb0 (root@) (gcc (nb2 20180327) 5.5.0) debug=n Thu Jul 12 09:31:12 IST 2018
(XEN) Latest ChangeSet:
(XEN) Bootloader: unknown
(XEN) Command line: dom0_mem=2G
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009d400 (usable)
(XEN) 000000000009d400 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000020000000 (usable)
(XEN) 0000000020000000 - 0000000020200000 (reserved)
(XEN) 0000000020200000 - 0000000040004000 (usable)
(XEN) 0000000040004000 - 0000000040005000 (reserved)
(XEN) 0000000040005000 - 00000000d5f0a000 (usable)
(XEN) 00000000d5f0a000 - 00000000d6000000 (reserved)
(XEN) 00000000d6000000 - 00000000d6753000 (usable)
(XEN) 00000000d6753000 - 00000000d6800000 (reserved)
(XEN) 00000000d6800000 - 00000000d6fb3000 (usable)
(XEN) 00000000d6fb3000 - 00000000d7000000 (ACPI data)
(XEN) 00000000d7000000 - 00000000d86fd000 (usable)
(XEN) 00000000d86fd000 - 00000000d8800000 (ACPI NVS)
(XEN) 00000000d8800000 - 00000000d9e76000 (usable)
(XEN) 00000000d9e76000 - 00000000da7e4000 (reserved)
(XEN) 00000000da7e4000 - 00000000da827000 (ACPI NVS)
(XEN) 00000000da827000 - 00000000daaea000 (usable)
(XEN) 00000000daaea000 - 00000000daff0000 (reserved)
(XEN) 00000000daff0000 - 00000000db000000 (usable)
(XEN) 00000000db800000 - 00000000dfa00000 (reserved)
(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed00000 - 00000000fed04000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000011e600000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 DELL )
(XEN) ACPI: XSDT D6FF3080, 0084 (r1 DELL CBX3 1072009 AMI 10013)
(XEN) ACPI: FACP D6FFD650, 010C (r5 DELL CBX3 1072009 AMI 10013)
(XEN) ACPI: DSDT D6FF3198, A4B4 (r2 DELL CBX3 21 INTL 20091112)
(XEN) ACPI: FACS D87FE080, 0040
(XEN) ACPI: APIC D6FFD760, 0072 (r3 DELL CBX3 1072009 AMI 10013)
(XEN) ACPI: FPDT D6FFD7D8, 0044 (r1 DELL CBX3 1072009 AMI 10013)
(XEN) ACPI: MCFG D6FFD820, 003C (r1 DELL CBX3 1072009 MSFT 97)
(XEN) ACPI: HPET D6FFD860, 0038 (r1 DELL CBX3 1072009 AMI. 5)
(XEN) ACPI: SSDT D6FFD898, 0415 (r1 SataRe SataTabl 1000 INTL 20091112)
(XEN) ACPI: SSDT D6FFDCB0, 09B9 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
(XEN) ACPI: SSDT D6FFE670, 0B22 (r1 PmRef CpuPm 3000 INTL 20051117)
(XEN) ACPI: DMAR D6FFF198, 00B8 (r1 INTEL SNB 1 INTL 1)
(XEN) ACPI: ASF! D6FFF250, 00A5 (r32 INTEL HCG 1 TFSM F4240)
(XEN) ACPI: SLIC D6FFF2F8, 0176 (r3 DELL CBX3 1072009 MSFT 10013)
(XEN) ACPI: BGRT D6FFF470, 0038 (r0 þ^G 1072009 AMI 10013)
(XEN) System RAM: 3969MB (4065224kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT - d87fe080/0000000000000000, using 32
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) xstate: size: 0x340 and states: 0x7
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Platform timer is 14.318MHz HPET
(XEN) Detected 2591.596 MHz processor.
(XEN) Initing memory sharing.
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Posted Interrupt not enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 4 CPUs
(XEN) Dom0 has maximum 600 PIRQs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0xffffffff80200000 -> 0xffffffff80f22000
(XEN) Dom0 symbol map 0xffffffff80f22000 -> 0xffffffff81069cd0
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000118000000->000000011a000000 (516096 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff81069cd0
(XEN) Init. ramdisk: ffffffff8106a000->ffffffff8106a000
(XEN) Phys-Mach map: ffffffff8106a000->ffffffff8146a000
(XEN) Start info: ffffffff8146a000->ffffffff8146a4b4
(XEN) Page tables: ffffffff8146b000->ffffffff8147a000
(XEN) Boot stack: ffffffff8147a000->ffffffff8147b000
(XEN) TOTAL: ffffffff80000000->ffffffff81800000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) Scrubbing Free RAM on 1 nodes using 2 CPUs
(XEN) ..................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 308kB init memory
dmesg
=====Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0_RC1 (XEN3_DOM0) #0: Fri Jul 13 22:36:36 IST 2018
root@localhost:/usr/src/sys/arch/amd64/compile/XEN3_DOM0
total memory = 2048 MB
avail memory = 1965 MB
cpu_rng: RDRAND
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
Dell Inc. Latitude E5430 vPro (01)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
ACPI: XSDT 0x00000000D6FF3080 000084 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000D6FFD650 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D6FF3198 00A4B4 (v02 DELL CBX3 00000021 INTL 20091112)
ACPI: FACS 0x00000000D87FE080 000040
ACPI: APIC 0x00000000D6FFD760 000072 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D6FFD7D8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x00000000D6FFD820 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x00000000D6FFD860 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D6FFD898 000415 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000D6FFDCB0 0009B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000D6FFE670 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: RMAD 0x00000000D6FFF198 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 0x00000000D6FFF250 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SLIC 0x00000000D6FFF2F8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0xE1, should be 0xA8 (20170303/tbprint-233)
ACPI: BGRT 0x00000000D6FFF470 000038 (v00 ?? 01072009 AMI 00010013)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu1 at mainbus0 apid 2
cpu2 at mainbus0 apid 1
cpu3 at mainbus0 apid 3
hypervisor0 at mainbus0: Xen version 4.8.3nb0
hypervisor0: features: pae_pgdir_above_4gb mmu_pt_update_preserve_ad highmem_assist gnttab_map_avail_bits
VIRQ_DEBUG interrupt using event channel 1
vcpu0 at hypervisor0
vcpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
vcpu0: package 0, core 0, smt 0
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
acpi0 at hypervisor0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <DELL , CBX3 ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (ECDV, PNP0C09-0): io 0x930,0x934
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
HPET (PNP0103) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
TIMR (PNP0100) at acpi0 not configured
CWDT (INT3F0D) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, DLLK0549) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, DLL0549) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
A_CC (SMO8810) at acpi0 not configured
AMW0 (PNP0C14) at acpi0 not configured
MEM2 (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: SMP LION rechargeable battery
acpibat0: granularity: low->warn 0.078 Ah, warn->full 0.078 Ah
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
RBTN (DELLABCE) at acpi0 not configured
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 107.0 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at hypervisor0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0154 (rev. 0x09)
vga0 at pci0 dev 2 function 0: vendor 8086 product 0166 (rev. 0x09)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
xhci0: interrupting at ioapic0 pin 16, event channel 5
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 7 Series KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0xf0e0, interrupting at ioapic0 pin 19, event channel 6
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at ioapic0 pin 20, event channel 7
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address b8:ca:3a:c5:bd:09
wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT>
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16, event channel 5
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22, event channel 8
hdafg0 at hdaudio0: vendor 111d product 76df
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Jack & Built-In]
hdafg0: DAC03 2ch: Speaker [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
hdvsmfg at hdaudio0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: DP02 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
iwn0 at pci2 dev 0 function 0: vendor 8086 product 0082 (rev. 0x34)
iwn0: interrupting at ioapic0 pin 17, event channel 9
iwn0: MIMO 2T2R, MoW, address 60:67:20:ca:83:0e
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: vendor 8086 product 1e14 (rev. 0xc4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ppb3 at pci0 dev 28 function 3: vendor 8086 product 1e16 (rev. 0xc4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci4 at ppb3 bus 7
pci4: i/o space, memory space enabled
ppb4 at pci0 dev 28 function 5: vendor 8086 product 1e1a (rev. 0xc4)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 11
pci5: i/o space, memory space enabled
sdhc0 at pci5 dev 0 function 0: vendor 1217 product 8221 (rev. 0x05)
sdhc0: interrupting at ioapic0 pin 17, event channel 9
sdhc0: SDHC 2.0, rev 192, SDMAsdhc0: base clock frequency out of range: 8 MHz
sdhc0: couldn't initialize host (0x10)
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 21, event channel 10
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e55 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19, event channel 6
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xcf30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18, event channel 11
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
Xen clock: using event channel 12
xenbus0: using event channel 13
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <ST320LT007-9ZV142>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVD+-RW GT80N, KZZCBFI4003, A103> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
umass0 at uhub4 port 2 configuration 1 interface 0
umass0: SanDisk (0x781) Cruzer Blade (0x5567), rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Blade, 1.00> disk removable
sd0: 60144 MB, 65535 cyl, 16 head, 63 sec, 512 bytes/sect x 123174912 sectors
ugen0 at uhub4 port 4
ugen0: Broadcom Corp (0x413c) BCM20702A0 (0x8197), rev 2.00/1.12, addr 4
ugen1 at uhub4 port 5
ugen1: CN0Y4TWT7248731AAASKA01 (0xc45) Laptop_Integrated_Webcam_E4HD (0x643f), rev 2.00/28.06, addr 5
WARNING: 2 errors while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
Your machine does not initialize mem_clusters; sparse_dumps disabled
root file system type: ffs
kern.module.path=/stand/amd64-xen/8.0/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
balloon0 at xenbus0 id 0: Xen Balloon driver
balloon0: current reservation: 2097152 KiB
umass1 at uhub1 port 1 configuration 1 interface 0
umass1: SanDisk (0x781) Cruzer Blade (0x5567), rev 2.00/1.27, addr 1
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <SanDisk, Cruzer Blade, 1.27> disk removable
sd1: 7401 MB, 15037 cyl, 16 head, 63 sec, 512 bytes/sect x 15158272 sectors
balloon0: current reservation: 524288 pages => target: 524288 pages
balloon0: current reservation: 524288 pages => target: 482764 pages
>How-To-Repeat:
Use above conf and launch xen domu
>Fix:
NA
>Release-Note:
>Audit-Trail:
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.46 2020/01/03 16:35:01 leot Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2020
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.