NetBSD Problem Report #553

From gnats  Fri Nov  4 00:10:06 1994
Received: from pain.lcs.mit.edu (pain.lcs.mit.edu [128.52.46.239]) by sun-lamp.cs.berkeley.edu (8.6.9/8.6.9) with ESMTP id AAA05358 for <gnats-bugs@sun-lamp.cs.berkeley.edu>; Fri, 4 Nov 1994 00:10:03 -0800
Message-Id: <199411040811.AAA00292@helix.CS.ORST.EDU>
Date: Fri, 4 Nov 1994 00:11:56 -0800
From: thorpej@cs.orst.edu
Reply-To: thorpej@cs.orst.edu
To: gnats-bugs@NetBSD.ORG
Subject: hp300 heartbeat light too boring
X-Send-Pr-Version: 3.2

>Number:         553
>Category:       port-hp300
>Synopsis:       hp300 heartbeat light too boring
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    gnats-admin (GNATS administrator)
>State:          closed
>Class:          change-request
>Submitter-Id:   net
>Arrival-Date:   Fri Nov 04 00:20:04 +0000 1994
>Closed-Date:    Fri Dec 30 07:22:37 +0000 1994
>Last-Modified:  
>Originator:     
>Release:        1.0
>Organization:
--------------------------------------------------------------------------
Jason R. Thorpe               thorpej@cs.orst.edu                 758-2003
Systems Administrator            CSWest Room 5                    737-5567
CS Dept, Oregon State University           http://www.cs.orst.edu/~thorpej
               "I brought my BOWLING BALL -- and some DRUGS!"
                      -- ztp
>Environment:

System: NetBSD helix 1.0 NetBSD 1.0 (HELIX) #34: Thu Nov 3 21:48:29 PST 1994 thorpej@helix:/usr/src/sys/arch/hp300/compile/HELIX hp300


>Description:
	The heartbeat light on an hp300, when compiled with USELEDS, is
	a little too boring, being a constant on-off-on-off, with the same
	delay for all iterations.  Sorry, but the HP-UX algorithm for the
	heartbeat light is just a little cooler to look at.  :-)
>How-To-Repeat:
	Compile an hp300 kernel with USELEDS.  Look at the front panel
	on a 400-series.  Peer through the front slats on a
	380, 375, 370 and 345.
>Fix:
	The following patch to locore.s pretty much emulates the
	HP-UX ``heartbeat'' with alternating fast and slow throbs.
	It might be off by as much as a few 100ths of a second, but is
	pretty close :-)

*** distribution/locore.s	Thu Nov  3 23:57:46 1994
--- locore.s	Thu Nov  3 23:56:58 1994
***************
*** 644,654 ****
  	movl	heartbeat,d0		| get tick count
  	addql	#1,d0			|  increment
  	movl	_hz,d1
! 	lsrl	#1,d1			| throb twice a second
  	cmpl	d0,d1			| are we there yet?
  	jne	Lnoled1			| no, nothing to do
  	tstl	_inledcontrol		| already updating LEDs?
  	jne	Lnoled2			| yes, skip it
  	movl	#LED_PULSE,sp@-
  	movl	#LED_DISK+LED_LANRCV+LED_LANXMT,sp@-
  	clrl	sp@-
--- 644,664 ----
  	movl	heartbeat,d0		| get tick count
  	addql	#1,d0			|  increment
  	movl	_hz,d1
! 	addl	#50,d1			| get the timing a little closer
! 	cmpl	#0,beatstatus		| time to slow down?
! 	jeq	SlowThrob
! 	lsrl	#3,d1			| fast throb
! SlowThrob:
! 	lsrl	#1,d1			| slow throb
  	cmpl	d0,d1			| are we there yet?
  	jne	Lnoled1			| no, nothing to do
  	tstl	_inledcontrol		| already updating LEDs?
  	jne	Lnoled2			| yes, skip it
+ 	addl	#1,beatstatus		| incr beat status
+ 	cmpl	#3,beatstatus		| time to reset?
+ 	ble	SkipReset
+ 	movl	#0,beatstatus		| reset the status indicator
+ SkipReset:
  	movl	#LED_PULSE,sp@-
  	movl	#LED_DISK+LED_LANRCV+LED_LANXMT,sp@-
  	clrl	sp@-
***************
*** 2430,2435 ****
--- 2440,2447 ----
  #ifdef USELEDS
  heartbeat:
  	.long	0		| clock ticks since last pulse of heartbeat
+ beatstatus:
+ 	.long	0		| for determining a fast or slow throb
  #endif
  #ifdef DEBUG
  	.globl	fulltflush, fullcflush
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: hpeyerl 
State-Changed-When: Thu Dec 29 23:22:37 PST 1994 
State-Changed-Why:  
Change put in by Herb. If it doesn't work, Jason will die. 
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.