NetBSD Problem Report #58255
From www@netbsd.org Mon May 13 22:21:31 2024
Return-Path: <www@netbsd.org>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
by mollari.NetBSD.org (Postfix) with ESMTPS id CA5021A924D
for <gnats-bugs@gnats.NetBSD.org>; Mon, 13 May 2024 22:21:30 +0000 (UTC)
Message-Id: <20240513222130.03DAE1A924E@mollari.NetBSD.org>
Date: Mon, 13 May 2024 22:21:29 +0000 (UTC)
From: bsduck@mailo.com
Reply-To: bsduck@mailo.com
To: gnats-bugs@NetBSD.org
Subject: HP EliteBook 8570p - keyboard and trackpad don't resume from sleep
X-Send-Pr-Version: www-1.0
>Number: 58255
>Category: port-amd64
>Synopsis: HP EliteBook 8570p - keyboard and trackpad don't resume from sleep
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-amd64-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Mon May 13 22:25:00 +0000 2024
>Closed-Date:
>Last-Modified: Tue May 14 13:45:01 +0000 2024
>Originator: bsduck
>Release: NetBSD 10.0
>Organization:
>Environment:
NetBSD 10.0 (GENERIC) amd64
>Description:
The HP EliteBook 8570p laptop can suspend and resume, but after waking up from sleep, the built-in keyboard and trackpad don't work anymore.
Interestingly, an USB mouse that was plugged in before suspend will successfully wake up, while an USB keyboard won't.
The same USB mouse and keyboard both work when plugged in after resume.
This happens both from within a X11 session and from the console.
>How-To-Repeat:
1. # sysctl -w hw.acpi.sleep.state=3
2. Wake up the machine.
>Fix:
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->feedback
State-Changed-By: riastradh@NetBSD.org
State-Changed-When: Mon, 13 May 2024 23:13:52 +0000
State-Changed-Why:
Can you please provide dmesg from before and after the suspend/resume
cycle?
From: bsduck@mailo.com
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: port-amd64/58255 (HP EliteBook 8570p - keyboard and trackpad
don't resume from sleep)
Date: Tue, 14 May 2024 14:49:54 +0200 (CEST)
Here it is:
<boot>
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 20=
03,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, =
2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, =
2023,
[ 1.000000] 2024
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All righ=
ts reserved.
[ 1.000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
[ 1.000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compil=
e/GENERIC
[ 1.000000] total memory =3D 8057 MB
[ 1.000000] avail memory =3D 7765 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz qual=
ity 100
[ 1.000004] efi: systbl at pa b93fef18
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000B9FFE014 000024 (v02 HPQOEM)
[ 1.000004] ACPI: XSDT 0x00000000B9FFE120 000094 (v01 HPQOEM SLIC-MPC =
0000000F 01000013)
[ 1.000004] ACPI: FACP 0x00000000B9FFC000 00010C (v05 HPQOEM 17A7 =
0000000F HP 00000001)
[ 1.000004] ACPI: DSDT 0x00000000B9FD3000 023137 (v02 HPQOEM 17A7 =
00000001 INTL 20110112)
[ 1.000004] ACPI: FACS 0x00000000B9C34000 000040
[ 1.000004] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 17A7 =
00000001 HP 00000001)
[ 1.000004] ACPI: APIC 0x00000000B9FFA000 0000BC (v01 HPQOEM 17A7 =
00000001 HP 00000001)
[ 1.000004] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 17A7 =
00000001 HP 00000001)
[ 1.000004] ACPI: TCPA 0x00000000B9FF7000 000032 (v02 HPQOEM 17A7 =
00000000 HP 00000001)
[ 1.000004] ACPI: SSDT 0x00000000B9FD0000 0002CA (v01 HPQOEM SataAhci =
00001000 INTL 20110112)
[ 1.000004] ACPI: SSDT 0x00000000B9FCF000 00048A (v01 HPQOEM PtidDevc =
00001000 INTL 20110112)
[ 1.000004] ACPI: SLIC 0x00000000B9FCE000 000176 (v01 HPQOEM SLIC-MPC =
00000001 HP 00000001)
[ 1.000004] ACPI: MSDM 0x00000000B9FCD000 000055 (v03 HPQOEM SLIC-MPC =
00000000 HP 00000001)
[ 1.000004] ACPI: FPDT 0x00000000B9FCC000 000044 (v01 HPQOEM 17A7 =
00000001 HP 00000001)
[ 1.000004] ACPI: BGRT 0x00000000B9FCB000 000038 (v00 HPQOEM 17A7 =
00000001 HP 00000001)
[ 1.000004] ACPI: SSDT 0x00000000B9FCA000 0009B6 (v01 PmRef Cpu0Ist =
00003000 INTL 20110112)
[ 1.000004] ACPI: SSDT 0x00000000B9FC9000 000AAD (v01 PmRef CpuPm =
00003000 INTL 20110112)
[ 1.000004] ACPI: ASF! 0x00000000B9FF8000 0000A5 (v32 HPQOEM 17A7 =
00000001 HP 00000001)
[ 1.000004] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 2=
4 pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz, id 0x306a9=
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 1
[ 1.000004] cpu1: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz, id 0x306a9=
[ 1.000004] cpu1: node 0, package 0, core 0, smt 1
[ 1.000004] cpu2 at mainbus0 apid 2
[ 1.000004] cpu2: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz, id 0x306a9=
[ 1.000004] cpu2: node 0, package 0, core 1, smt 0
[ 1.000004] cpu3 at mainbus0 apid 3
[ 1.000004] cpu3: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz, id 0x306a9=
[ 1.000004] cpu3: node 0, package 0, core 1, smt 1
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,0000000f>, AslId < =
,01000013>
[ 1.000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000=
000
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFDB60586A5008 000861 (v01 PmRef Cpu0Cst =
00003001 INTL 20110112)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFDB6185467C08 000303 (v01 PmRef ApIst =
00003000 INTL 20110112)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFDB60585F0608 000119 (v01 PmRef ApCst =
00003000 INTL 20110112)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz =
quality 1000
[ 1.045548] hpet0 at acpi0: high precision event timer (mem 0xfed00000=
-0xfed00400)
[ 1.045548] timecounter: Timecounter "hpet0" frequency 14318180 Hz qua=
lity 2000
[ 1.046449] acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
[ 1.046449] WLBU (HPQ6001) at acpi0 not configured
[ 1.046449] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.046449] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output D=
evice
[ 1.046449] acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output D=
evice
[ 1.046449] acpiout1: brightness levels: [0-67,69-100]
[ 1.046449] acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output D=
evice
[ 1.046449] acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output D=
evice
[ 1.046449] acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output D=
evice
[ 1.046449] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output D=
evice
[ 1.046449] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output D=
evice
[ 1.046449] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output D=
evice
[ 1.046449] acpivga0: connected output devices:
[ 1.046449] acpivga0: 0x0400 (acpiout1): Unknown Output Device, head=
0
[ 1.046449] FWHD (INT0800) at acpi0 not configured
[ 1.046449] tpm0 at acpi0 (GTPM, IFX0102): io 0xfe00-0xfe0f,0xfe80-0xf=
e8f mem 0xfed40000-0xfed44fff
[ 1.046449] tpm0: device 0x000b15d1 rev 0x10
[ 1.046449] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 =
irq 0
[ 1.046449] lpt0 at acpi0 (LPT0, PNP0401): io 0x378-0x37f,0x778-0x77a =
irq 5
[ 1.046449] pckbc1 at acpi0 (PS2K, HPQ8001) (kbd port): io 0x60,0x64 i=
rq 1
[ 1.046449] pckbc2 at acpi0 (PS2M, SYN018F) (aux port): irq 12
[ 1.046449] ACEL (HPQ6000) at acpi0 not configured
[ 1.046449] MEM2 (PNP0C01) at acpi0 not configured
[ 1.046449] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
[ 1.046449] acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
[ 1.046449] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
[ 1.046449] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.046449] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.046449] acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
[ 1.046449] wmihp0 at acpiwmi0: HP WMI mappings
[ 1.046449] acpitz0 at acpi0 (CPUZ)
[ 1.046449] acpitz0: levels: critical 128.0 C, hot 104.0 C, passive co=
oling
[ 1.046449] acpitz1 at acpi0 (GFXZ): cpu0
[ 1.046449] acpitz1: levels: critical 128.0 C, passive 102.0 C, passiv=
e cooling
[ 1.046449] acpitz2 at acpi0 (EXTZ)
[ 1.046449] acpitz2: levels: critical 128.0 C, passive cooling
[ 1.046449] acpitz3 at acpi0 (LOCZ)
[ 1.046449] acpitz3: levels: critical 128.0 C, passive cooling
[ 1.046449] acpitz4 at acpi0 (BATZ): cpu0
[ 1.046449] acpitz4: levels: critical 128.0 C, passive 55.0 C, passive=
cooling
[ 1.046449] acpitz5 at acpi0 (PCHZ)
[ 1.046449] acpitz5: levels: critical 128.0 C, passive cooling
[ 1.046449] acpitz6 at acpi0 (DM1Z)
[ 1.046449] acpitz6: levels: critical 128.0 C, passive cooling
[ 1.046449] acpitz7 at acpi0 (DM2Z)
[ 1.046449] acpitz7: levels: critical 128.0 C, passive cooling
[ 1.046449] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.046449] pckbd0 at pckbc1 (kbd slot)
[ 1.046449] pckbc1: using irq 1 for kbd slot
[ 1.046449] wskbd0 at pckbd0: console keyboard
[ 1.046449] pms0 at pckbc1 (aux slot)
[ 1.046449] pckbc1: using irq 12 for aux slot
[ 1.046449] wsmouse0 at pms0 mux 0
[ 1.046449] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.046449] pci0: i/o space, memory space enabled, rd/line, rd/mult, w=
r/inv ok
[ 1.046449] pchb0 at pci0 dev 0 function 0: Intel Ivy Bridge Host Brid=
ge (rev. 0x09)
[ 1.046449] i915drmkms0 at pci0 dev 2 function 0: Intel Ivy Bridge Int=
egrated Graphics Device (rev. 0x09)
[ 1.046449] xhci0 at pci0 dev 20 function 0: Intel 7 Series USB xHCI (=
rev. 0x04)
[ 1.046449] xhci0: 64-bit DMA
[ 1.046449] xhci0: interrupting at msi0 vec 0
[ 1.046449] xhci0: xHCI version 1.0
[ 1.046449] usb0 at xhci0: USB revision 3.0
[ 1.046449] usb1 at xhci0: USB revision 2.0
[ 1.046449] Intel 7 Series MEI Controller (miscellaneous communication=
s, revision 0x04) at pci0 dev 22 function 0 not configured
[ 1.046449] wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH2 LAN (82579=
LM) Controller (rev. 0x04)
[ 1.046449] wm0: interrupting at msi1 vec 0
[ 1.046449] wm0: PCI-Express bus
[ 1.046449] wm0: 2048 words FLASH, version 0.15.4
[ 1.046449] wm0: RX packet buffer size: 26KB
[ 1.046449] wm0: Ethernet address d4:c9:ef:52:86:8d
[ 1.046449] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
[ 1.046449] ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, r=
ev. 3
[ 1.046449] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 10=
00baseT, 1000baseT-FDX, auto
[ 1.046449] ehci0 at pci0 dev 26 function 0: Intel 7 Series USB EHCI (=
rev. 0x04)
[ 1.046449] ehci0: 64-bit DMA
[ 1.046449] ehci0: interrupting at ioapic0 pin 16
[ 1.046449] ehci0: EHCI version 1.0
[ 1.046449] ehci0: Using DMA subregion for control data structures
[ 1.046449] usb2 at ehci0: USB revision 2.0
[ 1.046449] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[ 1.046449] hdaudio0: interrupting at msi2 vec 0
[ 1.046449] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit=
[ 1.046449] hdafg0 at hdaudio0: Sigmatel 92HD81B1X5
[ 1.046449] hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[ 1.046449] hdafg0: ADC01 2ch: Line In [Jack], Mic In [Jack]
[ 1.046449] hdafg0: DAC02 2ch: Speaker [Jack]
[ 1.046449] hdafg0: ADC03 2ch: Mic In [Jack & Built-In]
[ 1.046449] hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz P=
CM16 PCM20 PCM24 AC3
[ 1.046449] audio0 at hdafg0: playback, capture, full duplex, independ=
ent
[ 1.046449] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) f=
or playback
[ 1.046449] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) f=
or recording
[ 1.046449] spkr0 at audio0: PC Speaker (synthesized)
[ 1.046449] wsbell at spkr0 not configured
[ 1.046449] hdafg1 at hdaudio0: Intel product 2806
[ 1.046449] hdafg1: DP00 8ch: Digital Out [Jack]
[ 1.046449] hdafg1: DP01 8ch: Digital Out [Jack]
[ 1.046449] hdafg1: DP02 8ch: Digital Out [Jack]
[ 1.046449] hdafg1: 8ch/0ch 48000Hz PCM16*
[ 1.046449] audio1 at hdafg1: playback, capture, full duplex, independ=
ent
[ 1.046449] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) f=
or playback
[ 1.046449] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) f=
or recording
[ 1.046449] spkr1 at audio1: PC Speaker (synthesized)
[ 1.046449] wsbell at spkr1 not configured
[ 1.046449] ppb0 at pci0 dev 28 function 0: Intel 7 Series PCIe (rev. =
0xc4)
[ 1.046449] ppb0: PCI Express capability version 2 <Root Port of PCI-E=
Root Complex> x1 @ 5.0GT/s
[ 1.046449] pci1 at ppb0 bus 1
[ 1.046449] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046449] ppb1 at pci0 dev 28 function 1: Intel 7 Series PCIe (rev. =
0xc4)
[ 1.046449] ppb1: PCI Express capability version 2 <Root Port of PCI-E=
Root Complex> x1 @ 5.0GT/s
[ 1.046449] pci2 at ppb1 bus 2
[ 1.046449] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046449] ppb2 at pci0 dev 28 function 2: Intel 7 Series PCIe (rev. =
0xc4)
[ 1.046449] ppb2: PCI Express capability version 2 <Root Port of PCI-E=
Root Complex> x1 @ 5.0GT/s
[ 1.046449] ppb2: link is x1 @ 2.5GT/s
[ 1.046449] pci3 at ppb2 bus 35
[ 1.046449] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046449] fwohci0 at pci3 dev 0 function 0: JMicron Technology JMB38=
X IEEE 1394 Host Controller (rev. 0x30)
[ 1.046449] fwohci0: interrupting at ioapic0 pin 18
[ 1.046449] fwohci0: OHCI version 1.10 (ROM=3D0)
[ 1.046449] fwohci0: No. of Isochronous channels is 4.
[ 1.046449] fwohci0: EUI64 ff:e4:73:ff:ff:ff:ff:fe
[ 1.046449] fwohci0: Phy 1394a available S400, 2 ports.
[ 1.046449] fwohci0: autoconfiguration error: fwphy_rddata: 0x5 loop=
=3D100, retry=3D100
[ 1.046449] fwohci0: autoconfiguration error: fwphy_rddata: 0x2 loop=
=3D100, retry=3D100
[ 1.046449] fwohci0: Link S400, max_rec 2048 bytes.
[ 1.046449] ieee1394if0 at fwohci0: IEEE1394 bus
[ 1.046449] fwip0 at ieee1394if0: IP over IEEE1394
[ 1.046449] fwohci0: Initiate bus reset
[ 1.046449] fwohci0: autoconfiguration error: fwphy_rddata: 0x1 loop=
=3D100, retry=3D100
[ 1.046449] fwohci0: autoconfiguration error: fwphy_rddata: 0x1 loop=
=3D100, retry=3D100
[ 1.046449] JMicron Technology JMB388 SD/MMC Host Controller (miscella=
neous system, revision 0x30) at pci3 dev 0 function 1 not configured
[ 1.046449] sdhc0 at pci3 dev 0 function 2: JMicron Technology JMB388 =
SD Host Controller (rev. 0x30)
[ 1.046449] sdhc0: interrupting at ioapic0 pin 18
[ 1.046449] sdhc0: SDHC 2.0, rev 173, caps <054032b2/00000000>, SDMA, =
50000 kHz, 1.8V 3.3V, 512 byte blocks
[ 1.046449] sdmmc0 at sdhc0 slot 0
[ 1.046449] ppb3 at pci0 dev 28 function 3: Intel 7 Series PCIe (rev. =
0xc4)
[ 1.046449] ppb3: PCI Express capability version 2 <Root Port of PCI-E=
Root Complex> x1 @ 5.0GT/s
[ 1.046449] ppb3: link is x1 @ 2.5GT/s
[ 1.046449] pci4 at ppb3 bus 36
[ 1.046449] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046449] iwn0 at pci4 dev 0 function 0: Intel Centrino Advanced-N 6=
205 WiFi (rev. 0x34)
[ 1.046449] iwn0: interrupting at msi3 vec 0
[ 1.046449] iwn0: MIMO 2T2R, MoW, address 60:67:20:ed:6d:1c
[ 1.046449] ehci1 at pci0 dev 29 function 0: Intel 7 Series USB EHCI (=
rev. 0x04)
[ 1.046449] ehci1: 64-bit DMA
[ 1.046449] ehci1: interrupting at ioapic0 pin 16
[ 1.046449] ehci1: EHCI version 1.0
[ 1.046449] ehci1: Using DMA subregion for control data structures
[ 1.046449] usb3 at ehci1: USB revision 2.0
[ 1.046449] ichlpcib0 at pci0 dev 31 function 0: Intel Mobile QM77 LPC=
(rev. 0x04)
[ 1.046449] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz =
quality 1000
[ 1.046449] ichlpcib0: 24-bit timer
[ 1.046449] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.046449] tco0: Min/Max interval 1/367 seconds
[ 1.046449] ahcisata0 at pci0 dev 31 function 2: Intel 7 Series (mobil=
e) SATA Controller (AHCI) (rev. 0x04)
[ 1.046449] ahcisata0: 64-bit DMA
[ 1.046449] ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xcf=
30ff65<SXS,EMS,PSC,SSC,PMD,ISS=3D0x3=3DGen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
[ 1.046449] ahcisata0: interrupting at msi4 vec 0
[ 1.046449] atabus0 at ahcisata0 channel 0
[ 1.046449] atabus1 at ahcisata0 channel 1
[ 1.046449] atabus2 at ahcisata0 channel 3
[ 1.046449] atabus3 at ahcisata0 channel 4
[ 1.046449] atabus4 at ahcisata0 channel 5
[ 1.046449] isa0 at ichlpcib0
[ 1.046449] pcppi0 at isa0 port 0x61
[ 1.046449] spkr2 at pcppi0: PC Speaker
[ 1.046449] wsbell at spkr2 not configured
[ 1.046449] midi0 at pcppi0: PC speaker
[ 1.046449] sysbeep0 at pcppi0
[ 1.046449] attimer1: attached to pcppi0
[ 1.046449] acpicpu0 at cpu0: ACPI CPU
[ 1.046449] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.046449] acpicpu0: C2: FFH, lat 80 us, pow 350 mW
[ 1.046449] acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2801 MHz, tur=
bo boost
[ 1.046449] acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2800 MHz
[ 1.046449] acpicpu0: P2: FFH, lat 10 us, pow 33218 mW, 2700 MHz
[ 1.046449] acpicpu0: P3: FFH, lat 10 us, pow 31470 mW, 2600 MHz
[ 1.046449] acpicpu0: P4: FFH, lat 10 us, pow 30093 mW, 2500 MHz
[ 1.046449] acpicpu0: P5: FFH, lat 10 us, pow 27087 mW, 2300 MHz
[ 1.046449] acpicpu0: P6: FFH, lat 10 us, pow 25469 mW, 2200 MHz
[ 1.046449] acpicpu0: P7: FFH, lat 10 us, pow 24202 mW, 2100 MHz
[ 1.046449] acpicpu0: P8: FFH, lat 10 us, pow 22640 mW, 2000 MHz
[ 1.046449] acpicpu0: P9: FFH, lat 10 us, pow 21110 mW, 1900 MHz
[ 1.046449] acpicpu0: P10: FFH, lat 10 us, pow 19923 mW, 1800 MHz
[ 1.046449] acpicpu0: P11: FFH, lat 10 us, pow 18457 mW, 1700 MHz
[ 1.046449] acpicpu0: P12: FFH, lat 10 us, pow 15909 mW, 1500 MHz
[ 1.046449] acpicpu0: P13: FFH, lat 10 us, pow 14824 mW, 1400 MHz
[ 1.046449] acpicpu0: P14: FFH, lat 10 us, pow 13470 mW, 1300 MHz
[ 1.046449] acpicpu0: P15: FFH, lat 10 us, pow 12146 mW, 1200 MHz
[ 1.046449] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.046449] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.046449] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.046449] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.046449] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.046449] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.046449] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.046449] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.046449] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=
=3D105
[ 1.046449] acpicpu1 at cpu1: ACPI CPU
[ 1.046449] acpicpu2 at cpu2: ACPI CPU
[ 1.046449] coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=
=3D105
[ 1.046449] acpicpu3 at cpu3: ACPI CPU
[ 1.046449] timecounter: Timecounter "clockinterrupt" frequency 100 Hz=
quality 0
[ 1.046449] timecounter: Timecounter "TSC" frequency 2793656000 Hz qua=
lity 3000
[ 1.923474] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), cla=
ss 9/0, rev 3.00/1.00, addr 0
[ 1.940603] uhub0: 4 ports with 4 removable, self powered
[ 1.940603] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), cla=
ss 9/0, rev 2.00/1.00, addr 0
[ 1.970603] uhub1: 4 ports with 4 removable, self powered
[ 1.970603] acpiacad0: AC adapter online.
[ 2.000602] acpibat0: Hewlett-Packard LIon rechargeable battery
[ 2.020603] tpm0: acpibat0: granularity: low->warn 0.100 Ah, warn->ful=
l 0.100 Ah
[ 2.020603] read 8 bytes, expected 10
[ 2.020603] uhub2 at usb3tpm0: deactivating entropy source
[ 2.045943] : NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2=
.00/1.00, addr 1
[ 2.066949] uhub2: 3 ports with 3 removable, self powered
[ 2.066949] uhub3 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), cla=
ss 9/0, rev 2.00/1.00, addr 1
[ 2.080603] uhub3: 3 ports with 3 removable, self powered
[ 2.080603] IPsec: Initialized Security Association Processing.
[ 2.110603] ahcisata0 port 0: device present, speed: 3.0Gb/s
[ 2.130602] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 3.150598] uhub4 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (=
0x0024), class 9/0, rev 2.00/0.00, addr 2
[ 3.170597] uhub4: single transaction translator
[ 3.190598] uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (=
0x0024), class 9/0, rev 2.00/0.00, addr 2
[ 3.190598] uhub5: single transaction translator
[ 3.190598] uhub4: 6 ports with 6 removable, self powered
[ 3.190598] uhub5: 8 ports with 8 removable, self powered
[ 3.710596] wd0 at atabus0 drive 0
[ 3.710596] wd0: <ST320LT007-9ZV142>
[ 3.710596] wd0: drive supports 16-sector PIO transfers, LBA48 address=
ing
[ 3.710596] wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x=
625142448 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 3.780595] wd0: GPT GUID: d54bbef7-aa24-4fa2-ad6f-468c171ec7c9
[ 3.780595] dk0 at wd0: "f0b826f0-034d-4833-b670-0699a1834fab", 262144=
blocks at 2048, type: msdos
[ 3.780595] dk1 at wd0: "c28c314d-894e-4b17-b87c-6a98200933f7", 608376=
832 blocks at 264192, type: ffs
[ 3.780595] dk2 at wd0: "bc731683-c0ea-46ce-ad3b-803f3cf6ef00", 165013=
91 blocks at 608641024, type: swap
[ 3.780595] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode=
6 (Ultra/133), NCQ (32 tags)
[ 3.780595] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DM=
A mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.790598] atapibus0 at atabus1: 1 targets
[ 3.790598] cd0 at atapibus0 drive 0: <hp DVDRAM GT80N, M5BD5LA1=
925, R102> cdrom removable
[ 3.800597] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode=
5 (Ultra/100)
[ 3.800597] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DM=
A mode 5 (Ultra/100) (using DMA)
[ 3.800597] swwdog0: software watchdog initialized
[ 3.870596] WARNING: 4 errors while detecting hardware; check system l=
og.
[ 3.870596] boot device: wd0
[ 3.880824] root on dk1 dumps on dk2
[ 3.910595] root file system type: ffs
[ 3.921267] kern.module.path=3D/stand/amd64/10.0/modules
[ 3.922437] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013)=
.
[ 3.940594] [drm] Driver supports precise vblank timestamp query.
[ 3.960594] i915drmkms0: interrupting at msi5 vec 0 (i915drmkms0)
[ 4.030594] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on m=
inor 0
[ 4.050594] intelfb0 at i915drmkms0
[ 4.050594] [drm] DRM_I915_DEBUG enabled
[ 4.050594] [drm] DRM_I915_DEBUG_GEM enabled
[ 4.050594] intelfb0: framebuffer at 0xc0005000, size 1600x900, depth =
32, stride 6400
[ 4.750591] {drm:netbsd:intel_set_cpu_fifo_underrun_reporting+0x29c} *=
ERROR* uncleared fifo underrun on pipe A
[ 4.760887] {drm:netbsd:intel_cpu_fifo_underrun_irq_handler+0x64} *ERR=
OR* CPU pipe A FIFO underrun
[ 4.760887] {drm:netbsd:intel_set_pch_fifo_underrun_reporting+0x14e} *=
ERROR* uncleared pch fifo underrun on pch transcoder A
[ 4.760887] {drm:netbsd:cpt_irq_handler+0x217} *ERROR* PCH transcoder =
A FIFO underrun
[ 4.780591] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 e=
mulation), using wskbd0
[ 4.780591] wsmux1: connecting to wsdisplay0
[ 15.690543] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 15.690543] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 15.690543] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 15.690543] wsdisplay0: screen 4 added (default, vt100 emulation)
<suspend & resume>
[ 104.300720] acpi0: entering state S3
[ 104.300720] Flushing disk caches: done
[ 104.930722] tpm0: short header read: 8ioapic0 reenabling
[ 107.322090] ahcisata0 port 0: device present, speed: 3.0Gb/s
[ 107.872092] autoconfiguration error: ahcisata0 port 0: setting WDCTL_R=
ST failed for drive 0
[ 108.962094] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 112.482103] ahcisata0 port 0: device present, speed: 3.0Gb/s
[ 113.102105] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 113.612106] fwohci0: Phy 1394a available S400, 2 ports.
[ 114.652107] fwohci0: autoconfiguration error: fwphy_rddata: 0x5 loop=
=3D100, retry=3D100
[ 115.692110] fwohci0: autoconfiguration error: fwphy_rddata: 0x2 loop=
=3D100, retry=3D100
[ 115.692110] fwohci0: Link S400, max_rec 2048 bytes.
[ 115.692110] fwohci0: Initiate bus reset
[ 116.732112] fwohci0: autoconfiguration error: fwphy_rddata: 0x1 loop=
=3D100, retry=3D100
[ 117.772115] fwohci0: autoconfiguration error: fwphy_rddata: 0x1 loop=
=3D100, retry=3D100
[ 137.602161] uhidev0 at uhub1 port 3 configuration 1 interface 0
[ 137.602161] uhidev0: LiteOn (0x17ef) Lenovo New Calliope USB Keyboard =
(0x6100), rev 2.00/1.02, addr 1, iclass 3/1
[ 137.602161] ukbd0 at uhidev0
[ 137.602161] wskbd1 at ukbd0 mux 1
[ 137.602161] wskbd1: connecting to wsdisplay0
[ 137.602161] uhidev1 at uhub1 port 3 configuration 1 interface 1
[ 137.602161] uhidev1: LiteOn (0x17ef) Lenovo New Calliope USB Keyboard =
(0x6100), rev 2.00/1.02, addr 1, iclass 3/0
[ 137.612162] uhidev1: 5 report ids
[ 137.612162] uhid0 at uhidev1 reportid 2: input=3D3, output=3D0, featur=
e=3D0
[ 137.612162] uhid1 at uhidev1 reportid 5: input=3D0, output=3D0, featur=
e=3D7
State-Changed-From-To: feedback->open
State-Changed-By: riastradh@NetBSD.org
State-Changed-When: Tue, 14 May 2024 13:41:57 +0000
State-Changed-Why:
feedback received
From: "Taylor R Campbell" <riastradh@netbsd.org>
To: gnats-bugs@gnats.NetBSD.org
Cc:
Subject: PR/58255 CVS commit: src/sys/dev/ic
Date: Tue, 14 May 2024 13:41:15 +0000
Module Name: src
Committed By: riastradh
Date: Tue May 14 13:41:15 UTC 2024
Modified Files:
src/sys/dev/ic: tpm.c
Log Message:
tpm(4): device_printf needs \n.
Observed in PR 58255.
To generate a diff of this commit:
cvs rdiff -u -r1.28 -r1.29 src/sys/dev/ic/tpm.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.47 2022/09/11 19:34:41 kim Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2024
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.
Home