NetBSD Problem Report #59434
From www@netbsd.org Tue May 20 01:53:39 2025
Return-Path: <www@netbsd.org>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256
client-signature RSA-PSS (2048 bits) client-digest SHA256)
(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
by mollari.NetBSD.org (Postfix) with ESMTPS id 8AF0C1A923C
for <gnats-bugs@gnats.NetBSD.org>; Tue, 20 May 2025 01:53:39 +0000 (UTC)
Message-Id: <20250520015338.535C01A923E@mollari.NetBSD.org>
Date: Tue, 20 May 2025 01:53:38 +0000 (UTC)
From: hudson@bduncanltd.com
Reply-To: hudson@bduncanltd.com
To: gnats-bugs@NetBSD.org
Subject: Unable to install NetBSD on Samsung Flash NP530XBB
X-Send-Pr-Version: www-1.0
>Number: 59434
>Category: port-amd64
>Synopsis: Unable to install NetBSD on Samsung Flash NP530XBB
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: port-amd64-maintainer
>State: open
>Class: support
>Submitter-Id: net
>Arrival-Date: Tue May 20 01:55:00 +0000 2025
>Last-Modified: Sun Jun 15 09:25:01 +0000 2025
>Originator: Hudson
>Release: NetBSD/amd64 10.1 USB image
>Organization:
B DUNCAN LTD
>Environment:
Not able to run commands.
>Description:
I am unable to install NetBSD on the Samsung Flash NP530XBB, when following the installation procedure, it raises lots of ld0d error reading fsbn.
>How-To-Repeat:
Create a bootable USB media, attempt to install on Samsung Flash NP530XBB
>Fix:
>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: install-manager->port-amd64-maintainer
Responsible-Changed-By: martin@NetBSD.org
Responsible-Changed-When: Tue, 20 May 2025 04:35:18 +0000
Responsible-Changed-Why:
This sounds like an interrupt issue
From: Martin Husemann <martin@duskware.de>
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash
NP530XBB)
Date: Tue, 20 May 2025 06:38:21 +0200
Do you have a serial console on that device?
Any other option to save the output of the "dmesg" command and post
it here?
Does that hardware have other USB ports that you could try or maybe you
could try a USB 2 Hub and connect the USB stick to that HUB?
Martin
From: mlelstv@serpens.de (Michael van Elst)
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash NP530XBB)
Date: Tue, 20 May 2025 06:22:49 -0000 (UTC)
gnats-admin@NetBSD.org ("Martin Husemann via gnats") writes:
> Do you have a serial console on that device?
> Any other option to save the output of the "dmesg" command and post
> it here?
>
> Does that hardware have other USB ports that you could try or maybe you
> could try a USB 2 Hub and connect the USB stick to that HUB?
If the error comes from ld0, the installation goes to the "disk",
which is either a UFS card (no idea how that works) or a regular
SD card. Then we probably lack a quirk for the controller.
There are instructions to add a M.2 SATA (not NVME) card as an
internal disk. This might be an option.
From: =?UTF-8?Q?Hudson_Dalpr=C3=A1?= <hudson@bduncanltd.com>
To: gnats-bugs@netbsd.org
Cc: port-amd64-maintainer@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org
Subject: Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash NP530XBB)
Date: Wed, 21 May 2025 07:54:01 +1200
> This sounds like an interrupt issue
How can I provide more information?
> Do you have a serial console on that device?
> Any other option to save the output of the "dmesg" command and post
> it here?
> Does that hardware have other USB ports that you could try or maybe you
> could try a USB 2 Hub and connect the USB stick to that HUB?
I can plug a USB 2 Hub and repeat the installation to capture the "dmesg".
But I don't know how to do it. Is there any documentation I can follow?
> If the error comes from ld0, the installation goes to the "disk",
> which is either a UFS card (no idea how that works) or a regular
> SD card. Then we probably lack a quirk for the controller.
The Samsung Flash NP530XBB has 64 GB e.MMC as a hard drive, maybe that
is useful information?
> There are instructions to add a M.2 SATA (not NVME) card as an
> internal disk. This might be an option.
Unfortunately, I have no budget for hardware modifications.
I would like to install NetBSD as it is, if possible.
From: mlelstv@serpens.de (Michael van Elst)
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash NP530XBB)
Date: Tue, 20 May 2025 20:39:17 -0000 (UTC)
gnats-admin@NetBSD.org ("=?UTF-8?Q?Hudson_Dalpr=C3=A1?= via gnats") writes:
> The Samsung Flash NP530XBB has 64 GB e.MMC as a hard drive, maybe that
> is useful information?
Here is some Linux output from a NP530XBB with eMMC.
sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 3)
mmc0: CQHCI version 5.10
mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
mmc0: Command Queue Engine enabled
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 DA4064 58.2 GiB
mmcblk0boot0: mmc0:0001 DA4064 4.00 MiB
mmcblk0boot1: mmc0:0001 DA4064 4.00 MiB
mmcblk0rpmb: mmc0:0001 DA4064 16.0 MiB, chardev (235:0)
mmcblk0: p1 p2 p3
sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:31d0] (rev 3)
sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002)
mmc1: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
Looks like the we cannot handle that controller yet. There are other
reports about systems that use the same device.
From: =?UTF-8?Q?Hudson_Dalpr=C3=A1?= <hudson@bduncanltd.com>
To: gnats-bugs@netbsd.org
Cc: port-amd64-maintainer@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org
Subject: Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash NP530XBB)
Date: Fri, 23 May 2025 09:28:30 +1200
> Looks like the we cannot handle that controller yet. There are other
> reports about systems that use the same device.
I was able to install FreeBSD on the same laptop. Is it possible to
port that controller to NetBSD?
If so, what are the high level steps or documentation one should follow?
From: mlelstv@serpens.de (Michael van Elst)
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash NP530XBB)
Date: Thu, 22 May 2025 23:04:52 -0000 (UTC)
gnats-admin@NetBSD.org ("=?UTF-8?Q?Hudson_Dalpr=C3=A1?= via gnats") writes:
> I was able to install FreeBSD on the same laptop. Is it possible to
> port that controller to NetBSD?
> If so, what are the high level steps or documentation one should follow?
For a start, report the dmesg output from FreeBSD.
From: =?UTF-8?Q?Hudson_Dalpr=C3=A1?= <hudson@bduncanltd.com>
To: gnats-bugs@netbsd.org
Cc: port-amd64-maintainer@netbsd.org, gnats-admin@netbsd.org,
netbsd-bugs@netbsd.org
Subject: Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash NP530XBB)
Date: Wed, 28 May 2025 10:53:51 +1200
> For a start, report the dmesg output from FreeBSD.
Thanks for your help.
$ uname -a
FreeBSD flash-530xbb 14.2-RELEASE-p1 FreeBSD 14.2-RELEASE-p1 GENERIC amd64
$ dmesg
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.2-RELEASE-p1 GENERIC amd64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git
llvmorg-18.1.6-0-g1118c2e05e67)
VT(efifb): resolution 1920x1080
CPU: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz (1094.40-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended
Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC>
Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0x6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3875782656 (3696 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL GLK-SOC >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x798e3000-0x798e301e
smbios0: Version: 3.2, BCD Revision: 3.2
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <SECCSD LH43STAR>
acpi0: Power Button (fixed)
unknown: I/O range not supported
ACPI Error: No handler for Region [ECR_] (0xfffff800017e7580)
[EmbeddedControl] (20221020/evregion-292)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20221020/exfldio-428)
ACPI Error: Aborting method \134_SB.BAT1._STA due to previous error
(AE_NOT_EXIST) (20221020/psparse-689)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Event timer "HPET5" frequency 19200000 Hz quality 440
Event timer "HPET6" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6b> port 0x62,0x66 on acpi0
Firmware Error (ACPI): Could not resolve symbol [\134_SB.CHRG],
AE_NOT_FOUND (20221020/psargs-503)
ACPI Error: Aborting method \134PNOT due to previous error
(AE_NOT_FOUND) (20221020/psparse-689)
ACPI Error: Aborting method \134_SB.PCI0.SBRG.H_EC._Q53 due to
previous error (AE_NOT_FOUND) (20221020/psparse-689)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.0.INTA
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0
vgapci0: Boot video device
pci0: <network> at device 12.0 (no driver attached)
hdac0: <Intel Gemini Lake HDA Controller> mem
0xa1110000-0xa1113fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on
pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Gemini Lake AHCI SATA controller> port
0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem
0xa1118000-0xa1119fff,0xa1124000-0xa11240ff,0xa1123000-0xa11237ff at
device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Gemini Lake USB 3.0 controller> mem
0xa1100000-0xa110ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
sdhci_pci0: <Generic SD HCI> mem
0xa111e000-0xa111efff,0xa111d000-0xa111dfff irq 39 at device 28.0 on
pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
sdhci_pci1: <Generic SD HCI> mem
0xa111c000-0xa111cfff,0xa111b000-0xa111bfff irq 42 at device 30.0 on
pci0
sdhci_pci1: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC" frequency 1094400212 Hz quality 1000
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0
ugen0.1: <Intel XHCI root HUB> at usbus0
hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC256 (Internal Analog)> at nid 20 and 18 on hdaa0
pcm1: <Realtek ALC256 (Right Analog)> at nid 33 and 25 on hdaa0
hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmcsd0: 63GB <MMCHC DA4064 0.1 SN 97196B42 MFG 09/2020 by 69 0x0000>
at mmc0 200.0MHz/8bit/8192-block
mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0
mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0
mmcsd0rpmb: 17MB partition 3 at mmcsd0
mmc1: No compatible cards found on bus
Trying to mount root from ufs:/dev/mmcsd0p2 [rw]...
uhub0: 16 ports with 16 removable, self powered
ugen0.2: <Generic Web Camera> at usbus0
ugen0.3: <Logitech USB Receiver> at usbus0
ugen0.4: <Samsung Fingerprint Device> at usbus0
ugen0.5: <vendor 0x8087 product 0x0aaa> at usbus0
Intel(R) Wireless WiFi based driver for FreeBSD
iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xa1114000-0xa1117fff
at device 12.0 on pci0
iwm0: hw rev 0x310, fw ver 34.3125811985.0, address c0:3c:59:68:a5:fb
ig4iic0: <Intel Gemini Lake I2C Controller-4> mem
0xa1122000-0xa1122fff,0xa1121000-0xa1121fff irq 31 at device 23.0 on
pci0
ig4iic0: Using MSI
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ig4iic1: <Intel Gemini Lake I2C Controller-5> mem
0xa1120000-0xa1120fff,0xa111f000-0xa111ffff irq 32 at device 23.1 on
pci0
ig4iic1: Using MSI
iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
iicbus1: <unknown card> at addr 0x15
ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem
0xa111a000-0xa111a0ff at device 31.1 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
wlan0: Ethernet address: c0:3c:59:68:a5:fb
lo0: link state changed to UP
ums0 on uhub0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 2> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
uhid0 on uhub0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 2> on usbus0
iichid0: <ELAN0B00:10 04F3:30C8 I2C HID device> at addr 0x15 irq 60 on iicbus1
hidbus0: <HID bus> on iichid0
wlan0: link state changed to UP
hms0: <ELAN0B00:10 04F3:30C8 Mouse> on hidbus0
hms0: 2 buttons and [XY] coordinates ID=1
hmt0: <ELAN0B00:10 04F3:30C8 TouchPad> on hidbus0
hconf0: <ELAN0B00:10 04F3:30C8 Configuration> on hidbus0
hmt0: Multitouch touchpad with 0 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [3047:1784]
Security policy loaded: MAC/ntpd (mac_ntpd)
From: =?UTF-8?Q?Hudson_Dalpr=C3=A1?= <dalpra.hcd@gmail.com>
To: gnats-bugs@netbsd.org
Cc: Christoph Badura <bad@bsd.de>
Subject: Re: port-amd64/59434: Unable to install NetBSD on Samsung Flash NP530XBB
Date: Sun, 15 Jun 2025 21:22:34 +1200
Hello everyone,
With Chris=E2=80=99s help, I was able to capture the dmesg output from the =
laptop.
The driver is supported by NetBSD, but it seems to be running into
some tuning issues.
Next I will try flashing a new iso with SDHC_DEBUG and SMMC_DEBUG to
gather more useful information.
Follow the captured dmesg:
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 200=
3,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2=
013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2=
023,
[ 1.000000] 2024
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1.000000]
mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory =3D 3902 MB
[ 1.000000] avail memory =3D 3744 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] RTC BIOS diagnostic error
0x3e<config_unit,memory_size,fixed_disk,invalid_time>
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000004] efi: systbl at pa 79a2b018
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x000000007963D000 000024 (v02 SECCSD)
[ 1.000004] ACPI: XSDT 0x000000007963D0C0 0000F4 (v01 SECCSD
LH43STAR 01072009 AMI 00010013)
[ 1.000004] ACPI: FACP 0x000000007964A340 000114 (v06 SECCSD
LH43STAR 01072009 AMI 00010013)
[ 1.000004] ACPI: DSDT 0x000000007963D2F0 00D04E (v02 SECCSD
LH43STAR 01072009 INTL 20160930)
[ 1.000004] ACPI: FACS 0x00000000796BEE80 000040
[ 1.000004] ACPI: FPDT 0x000000007964A460 000044 (v01 SECCSD
LH43STAR 01072009 AMI 00010013)
[ 1.000004] ACPI: FIDT 0x000000007964A4B0 00009C (v01 SECCSD
LH43STAR 01072009 AMI 00010013)
[ 1.000004] ACPI: MSDM 0x000000007964A550 000055 (v03 SECCSD
LH43STAR 01072009 AMI 00010013)
[ 1.000004] ACPI: MCFG 0x000000007964A5B0 00003C (v01 SECCSD
LH43STAR 01072009 MSFT 00000097)
[ 1.000004] ACPI: DBG2 0x000000007964A5F0 000072 (v00 INTEL
GLK-SOC 00000003 BRXT 0100000D)
[ 1.000004] ACPI: DBGP 0x000000007964A670 000034 (v01 INTEL
GLK-SOC 00000003 BRXT 0100000D)
[ 1.000004] ACPI: HPET 0x000000007964A6B0 000038 (v01 INTEL
GLK-SOC 00000003 BRXT 0100000D)
[ 1.000004] ACPI: LPIT 0x000000007964A6F0 00005C (v01 INTEL
GLK-SOC 00000003 BRXT 0100000D)
[ 1.000004] ACPI: APIC 0x000000007964A750 000084 (v04 INTEL
GLK-SOC 00000003 BRXT 0100000D)
[ 1.000004] ACPI: NPKT 0x000000007964A7E0 000065 (v01 INTEL
GLK-SOC 00000003 BRXT 0100000D)
[ 1.000004] ACPI: SSDT 0x000000007964A850 001A62 (v02 INTEL
DptfTab 00000003 BRXT 0100000D)
[ 1.000004] ACPI: SSDT 0x000000007964C2C0 004C2A (v02 INTEL
RVPRtd3 00000003 BRXT 0100000D)
[ 1.000004] ACPI: SSDT 0x0000000079650EF0 000513 (v01 Intel_
Platform 00001000 INTL 20160930)
[ 1.000004] ACPI: SSDT 0x0000000079651410 0000B1 (v01 Intel_
ADebTabl 00001000 INTL 20160930)
[ 1.000004] ACPI: SSDT 0x00000000796514D0 000472 (v02 PmRef
Cpu0Ist 00003000 INTL 20160930)
[ 1.000004] ACPI: SSDT 0x0000000079651950 000775 (v02 CpuRef
CpuSsdt 00003000 INTL 20160930)
[ 1.000004] ACPI: SSDT 0x00000000796520D0 00035F (v02 PmRef
Cpu0Tst 00003000 INTL 20160930)
[ 1.000004] ACPI: SSDT 0x0000000079652430 0001E6 (v02 PmRef ApTst
00003000 INTL 20160930)
[ 1.000004] ACPI: SSDT 0x0000000079652620 00285A (v02 SaSsdt
SaSsdt 00003000 INTL 20160930)
[ 1.000004] ACPI: BGRT 0x0000000079654E80 000038 (v01 SECCSD
LH43STAR 01072009 AMI 00010013)
[ 1.000004] ACPI: TPM2 0x0000000079654EC0 000034 (v04 SECCSD
LH43STAR 00000001 AMI 00000000)
[ 1.000004] ACPI: DMAR 0x0000000079654F00 0000A8 (v01 INTEL
GLK-SOC 00000003 BRXT 0100000D)
[ 1.000004] ACPI: WDAT 0x0000000079654FB0 000104 (v01
00000000 00000000)
[ 1.000004] ACPI: NHLT 0x00000000796550C0 00002D (v00 SECCSD
LH43STAR 00000002 01000013)
[ 1.000004] ACPI: WSMT 0x00000000796550F0 000028 (v01 SECCSD
LH43STAR 01072009 AMI 00010013)
[ 1.000004] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version
0x20, 120 pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: TSC freq CPUID 1094400000 Hz
[ 1.000004] cpu0: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz, id 0x706a1
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 2
[ 1.000004] cpu1: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz, id 0x706a1
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <SECCSD,LH43STAR,01072009>, AslId
<AMI ,00010013>
[ 1.000004] ACPI Error: No handler for Region [ECR_]
(0xffff98c6750662c8) [EmbeddedControl] (20221020/evregion-184)
[ 1.000004] ACPI Error: Region EmbeddedControl (ID=3D3) has no
handler (20221020/exfldio-320)
[ 1.000004] ACPI Error: Aborting method \_SB.BAT1._STA due to
previous error (AE_NOT_EXIST) (20221020/psparse-580)
[ 1.000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e00000=
00
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFF98C67521B908 000190 (v02 PmRef
Cpu0Cst 00003001 INTL 20160930)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFF98C6751A4408 0001E6 (v02 PmRef ApIst
00003000 INTL 20160930)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFF98C5FDFF6308 0000C9 (v02 PmRef ApCst
00003000 INTL 20160930)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545
Hz quality 1000
[ 1.050641] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1.050641] timecounter: Timecounter "hpet0" frequency 19200000 Hz
quality 2000
[ 1.053059] acpiec0 at acpi0 (H_EC, PNP0C09-1): io 0x62,0x66
[ 1.053059] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 i=
rq 0
[ 1.053059] pckbc1 at acpi0 (PS2K, MSF0001) (kbd port): io 0x60,0x64 ir=
q 1
[ 1.053059] SNS1 (INT3403) at acpi0 not configured
[ 1.053059] SPTP (ELAN0B00) at acpi0 not configured
[ 1.053059] acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
[ 1.053059] acpiwmibus at acpiwmi0 not configured
[ 1.053059] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.053059] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output De=
vice
[ 1.053059] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output De=
vice
[ 1.053059] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output De=
vice
[ 1.053059] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output De=
vice
[ 1.053059] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output De=
vice
[ 1.053059] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output De=
vice
[ 1.053059] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output De=
vice
[ 1.053059] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output De=
vice
[ 1.053059] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output De=
vice
[ 1.053059] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output De=
vice
[ 1.053059] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output D=
evice
[ 1.053059] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output D=
evice
[ 1.053059] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output D=
evice
[ 1.053059] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output D=
evice
[ 1.053059] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output D=
evice
[ 1.053059] acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output D=
evice
[ 1.053059] acpiout15: brightness levels: [1-100]
[ 1.053059] acpivga0: connected output devices:
[ 1.053059] acpivga0: 0x0400 (acpiout15): Unknown Output Device, head=
0
[ 1.053059] igpio0 at acpi0 (GPO1, INT3453-1): mem
0xd0c40000-0xd0c40cee irq 14
[ 1.053059] gpio0 at igpio0: 35 pins
[ 1.053059] igpio1 at acpi0 (GPO0, INT3453-2): mem
0xd0c50000-0xd0c50afe irq 14
[ 1.053059] gpio1 at igpio1: 35 pins
[ 1.053059] igpio2 at acpi0 (GPO2, INT3453-3): mem
0xd0c90000-0xd0c907be irq 15
[ 1.053059] gpio2 at igpio2: 35 pins
[ 1.053059] igpio3 at acpi0 (GPO3, INT3453-4): mem
0xd0c80000-0xd0c8082e irq 14
[ 1.053059] gpio3 at igpio3: 35 pins
[ 1.053059] TPM (MSFT0101) at acpi0 not configured
[ 1.053059] SCAI (SAM0426) at acpi0 not configured
[ 1.053059] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1.053059] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.053059] acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
[ 1.053059] acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
[ 1.053059] acpibat0: ACPI 4.0 functionality present
[ 1.053059] IETM (INT3400) at acpi0 not configured
[ 1.053059] acpitz0 at acpi0 (TZ00): cpu0 cpu1
[ 1.053059] acpitz0: levels: critical 97.0 C, passive 113.0 C,
passive cooling
[ 1.053059] acpitz1 at acpi0 (TZ01): cpu0 cpu1
[ 1.053059] acpitz1: levels: critical 97.0 C, passive 95.0 C,
passive cooling
[ 1.053059] STAD (ACPI000E) at acpi0 not configured
[ 1.053059] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 1.053059] pckbd0 at pckbc1 (kbd slot)
[ 1.053059] pckbc1: using irq 1 for kbd slot
[ 1.053059] wskbd0 at pckbd0: console keyboard
[ 1.053059] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.053059] pci0: i/o space, memory space enabled, rd/line,
rd/mult, wr/inv ok
[ 1.053059] pchb0 at pci0 dev 0 function 0: Intel Gemini Lake Host
Bridge (rev. 0x03)
[ 1.053059] Intel Gemini Lake DPTF (miscellaneous DASP, revision
0x03) at pci0 dev 0 function 1 not configured
[ 1.053059] Intel Gemini Lake GNA (miscellaneous system, revision
0x03) at pci0 dev 0 function 3 not configured
[ 1.053059] i915drmkms0 at pci0 dev 2 function 0: Intel UHD
Graphics 600 (rev. 0x03)
[ 1.053059] Intel Gemini Lake CNVi (miscellaneous network,
revision 0x03) at pci0 dev 12 function 0 not configured
[ 1.053059] Intel Gemini Lake HD Audio (audio multimedia, revision
0x03) at pci0 dev 14 function 0 not configured
[ 1.053059] Intel Gemini Lake TXE HECI 1 (miscellaneous
communications, revision 0x03) at pci0 dev 15 function 0 not
configured
[ 1.053059] ahcisata0 at pci0 dev 18 function 0: Intel Gemini Lake
SATA (rev. 0x03)
[ 1.053059] ahcisata0: 64-bit DMA
[ 1.053059] ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP
0xe536ff01<PSC,SSC,PMD,SPM,SAM,ISS=3D0x3=3DGen3,SCLO,SALP,SSNTF,SNCQ,S64A>
[ 1.053059] ahcisata0: interrupting at msi0 vec 0
[ 1.053059] atabus0 at ahcisata0 channel 0
[ 1.053059] atabus1 at ahcisata0 channel 1
[ 1.053059] xhci0 at pci0 dev 21 function 0: Intel Gemini Lake USB
Host (xHCI) (rev. 0x03)
[ 1.053059] xhci0: 64-bit DMA
[ 1.053059] xhci0: interrupting at msi1 vec 0
[ 1.053059] xhci0: xHCI version 1.0
[ 1.053059] usb0 at xhci0: USB revision 3.0
[ 1.053059] usb1 at xhci0: USB revision 2.0
[ 1.053059] dwiic0 at pci0 dev 23 function 0: I2C controller instance 4
[ 1.053059] dwiic0: interrupting at ioapic0 pin 31
[ 1.053059] iic0 at dwiic0: I2C bus
[ 1.053059] dwiic1 at pci0 dev 23 function 1: I2C controller instance 5
[ 1.053059] dwiic1: interrupting at ioapic0 pin 32
[ 1.053059] iic1 at dwiic1: I2C bus
[ 1.053059] ihidev0 at iic1 addr 0x15: vendor 0x4f3 product 0x30c8, SPT=
P
[ 1.053059] ihidev0: 14 report ids
[ 1.053059] ihidev0: interrupting at irq 60
[ 1.053059] ims0 at ihidev0 reportid 1: 2 buttons
[ 1.053059] wsmouse0 at ims0 mux 0
[ 1.053059] hid at ihidev0 reportid 2 not configured
[ 1.053059] hid at ihidev0 reportid 3 not configured
[ 1.053059] hid at ihidev0 reportid 4 not configured
[ 1.053059] hid at ihidev0 reportid 5 not configured
[ 1.053059] hid at ihidev0 reportid 6 not configured
[ 1.053059] hid at ihidev0 reportid 7 not configured
[ 1.053059] hid at ihidev0 reportid 11 not configured
[ 1.053059] hid at ihidev0 reportid 12 not configured
[ 1.053059] hid at ihidev0 reportid 13 not configured
[ 1.053059] hid at ihidev0 reportid 14 not configured
[ 1.053059] sdhc0 at pci0 dev 28 function 0: Intel Gemini Lake
eMMC (rev. 0x03)
[ 1.053059] sdhc0: interrupting at ioapic0 pin 39
[ 1.053059] sdhc0: SDHC 3.0, rev 16, caps <546ec881/80000807>,
32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200
1.8V, re-tuning mode 1 (128s timer), 2048 byte blocks
[ 1.053059] sdmmc0 at sdhc0 slot 0
[ 1.053059] sdhc1 at pci0 dev 30 function 0: Intel product 31d0 (rev. 0=
x03)
[ 1.053059] sdhc1: interrupting at ioapic0 pin 42
[ 1.053059] sdhc1: SDHC 3.0, rev 16, caps <756ac881/00000807>,
32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200
1.8V 3.3V, re-tuning mode 1 (128s timer), 2048 byte blocks
[ 1.053059] sdmmc1 at sdhc1 slot 0
[ 1.053059] pcib0 at pci0 dev 31 function 0: Intel Gemini Lake LPC
(rev. 0x03)
[ 1.053059] ichsmb0 at pci0 dev 31 function 1: Intel Gemini Lake
SMBus (rev. 0x03)
[ 1.053059] ichsmb0: interrupting at ioapic0 pin 20
[ 1.053059] iic2 at ichsmb0: I2C bus
[ 1.053059] isa0 at pcib0
[ 1.053059] pcppi0 at isa0 port 0x61
[ 1.053059] spkr0 at pcppi0: PC Speaker
[ 1.053059] wsbell at spkr0 not configured
[ 1.053059] midi0 at pcppi0: PC speaker
[ 1.053059] sysbeep0 at pcppi0
[ 1.053059] attimer1: attached to pcppi0
[ 1.053059] acpicpu0 at cpu0: ACPI CPU
[ 1.053059] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.053059] acpicpu0: C2: FFH, lat 50 us, pow 10 mW
[ 1.053059] acpicpu0: C3: FFH, lat 150 us, pow 10 mW
[ 1.053059] acpicpu0: P0: FFH, lat 10 us, pow 0 mW, 1101 MHz,
turbo boost
[ 1.053059] acpicpu0: P1: FFH, lat 10 us, pow 0 mW, 1100 MHz
[ 1.053059] acpicpu0: P2: FFH, lat 10 us, pow 0 mW, 1000 MHz
[ 1.053059] acpicpu0: P3: FFH, lat 10 us, pow 0 mW, 900 MHz
[ 1.053059] acpicpu0: P4: FFH, lat 10 us, pow 0 mW, 800 MHz
[ 1.053059] acpicpu0: T0: FFH, lat 1 us, pow 0 mW, 100 %
[ 1.053059] acpicpu0: T1: FFH, lat 1 us, pow 0 mW, 88 %
[ 1.053059] acpicpu0: T2: FFH, lat 1 us, pow 0 mW, 75 %
[ 1.053059] acpicpu0: T3: FFH, lat 1 us, pow 0 mW, 63 %
[ 1.053059] acpicpu0: T4: FFH, lat 1 us, pow 0 mW, 50 %
[ 1.053059] acpicpu0: T5: FFH, lat 1 us, pow 0 mW, 38 %
[ 1.053059] acpicpu0: T6: FFH, lat 1 us, pow 0 mW, 25 %
[ 1.053059] acpicpu0: T7: FFH, lat 1 us, pow 0 mW, 13 %
[ 1.053059] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=3D=
105
[ 1.053059] acpicpu1 at cpu1: ACPI CPU
[ 1.053059] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=3D=
105
[ 1.053059] cpu0: TSC freq CPUID 1094400000 Hz
[ 1.053059] cpu0: TSC freq calibrated 1094399000 Hz
[ 1.053059] timecounter: Timecounter "clockinterrupt" frequency
100 Hz quality 0
[ 1.053059] timecounter: Timecounter "TSC" frequency 1094399000 Hz
quality 3000
[ 2.021540] acpiacad0: AC adapter offline.
[ 2.021540] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 3.00/1.00, addr 0
[ 2.054345] uhub0: 7 ports with 7 removable, self powered
[ 2.064345] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 0
[ 2.104345] uhub1: 9 ports with 9 removable, self powered
[ 2.124347] IPsec: Initialized Security Association Processing.
[ 2.124347] acpibat0: SAMSUNG Electronics LION rechargeable battery
[ 2.154344] acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001=
Ah
[ 2.224347] sdhc1: cmd index error
[ 2.224347] sdhc1: cmd end bit error
[ 2.237042] sdhc1: cmd end bit error
[ 2.254346] sdhc1: cmd index error
[ 2.254346] sdhc1: cmd end bit error
[ 2.274348] sdhc1: cmd end bit error
[ 2.294345] sdmmc1: autoconfiguration error: couldn't enable card: 60
[ 2.414347] sdhc1: cmd index error
[ 2.414347] sdhc1: cmd end bit error
[ 2.426790] sdhc1: cmd end bit error
[ 2.438158] sdhc1: cmd index error
[ 2.438158] sdhc1: cmd end bit error
[ 2.450732] sdhc1: cmd end bit error
[ 2.464345] sdmmc1: autoconfiguration error: couldn't enable card: 60
[ 2.604347] umass0 at uhub0 port 2 configuration 1 interface 0
[ 2.604347] umass0: USB (0x0781) SanDisk 3.2Gen1 (0x5591), rev
3.20/1.00, addr 1
[ 2.604347] umass0: using SCSI over Bulk-Only
[ 2.604347] scsibus0 at umass0: 2 targets, 1 lun per target
[ 2.614347] sd0 at scsibus0 target 0 lun 0: <USB, SanDisk 3.2Gen1,
1.00> disk removable
[ 2.614347] sd0: 58680 MB, 65535 cyl, 16 head, 63 sec, 512
bytes/sect x 120176640 sectors
[ 2.624347] sd0: GPT GUID: 867794b8-d609-49ee-9c51-33a08260ec8b
[ 2.624347] dk0 at sd0: "EFI system", 262144 blocks at 2048, type: msdo=
s
[ 2.635251] dk1 at sd0: "3c386667-4e85-4442-ac6e-943931e02174",
4853760 blocks at 264192, type: ffs
[ 2.714347] uvideo0 at uhub1 port 3 configuration 1 interface 0:
Generic (0x2232) Web Camera (0x1080), rev 2.00/0.19, addr 2
[ 2.744346] video0 at uvideo0: Generic (0x2232) Web Camera
(0x1080), rev 2.00/0.19, addr 2
[ 3.264347] uhidev0 at uhub1 port 6 configuration 1 interface 0
[ 3.294345] uhidev0: Logitech (0x046d) USB Receiver (0xc52f), rev
2.00/30.00, addr 3, iclass 3/1
[ 3.324345] ums0 at uhidev0: 16 buttons, W and Z dirs
[ 3.354345] wsmouse1 at ums0 mux 0
[ 3.384345] uhidev1 at uhub1 port 6 configuration 1 interface 1
[ 3.414345] uhidev1: Logitech (0x046d) USB Receiver (0xc52f), rev
2.00/30.00, addr 3, iclass 3/0
[ 3.444345] uhidev1: 17 report ids
[ 3.474346] uhid0 at uhidev1 reportid 3: input=3D4, output=3D0, feature=
=3D0
[ 3.504346] uhid1 at uhidev1 reportid 16: input=3D6, output=3D6, featur=
e=3D0
[ 3.534346] uhid2 at uhidev1 reportid 17: input=3D19, output=3D19, feat=
ure=3D0
[ 3.584348] ahcisata0 port 1: PHY offline
[ 3.584348] ahcisata0 port 0: PHY offline
[ 3.634347] sdhc0: autoconfiguration error: tuning failed, using
fixed sampling clock
[ 3.664346] ld0 at sdmmc0: <0x45:0x0100:DA4064:0x00:0x97196b42:0x000>
[ 3.694347] ld0: 59640 MB, 7603 cyl, 255 head, 63 sec, 512
bytes/sect x 122142720 sectors
[ 3.694347] sdhc0: cmd timeout error
[ 3.734347] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 4.134347] ugen0 at uhub1 port 7
[ 4.154347] ugen0: Samsung (0x04e8) Fingerprint Device (0x730a),
rev 2.00/0.00, addr 4
[ 4.304349] sdhc0: cmd timeout error
[ 4.344348] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 4.694349] ubt0 at uhub1 port 9
[ 4.724348] ubt0: vendor 8087 (0x8087) product 0aaa (0x0aaa), rev
2.00/0.02, addr 5
[ 4.894349] sdhc0: cmd timeout error
[ 4.934348] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 5.464350] sdhc0: cmd timeout error
[ 5.504349] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 6.024351] sdhc0: cmd timeout error
[ 6.064349] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 6.584351] sdhc0: cmd timeout error
[ 6.624350] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0)
[ 6.654350] sdhc0: cmd timeout error
[ 6.694348] sdhc0: cmd timeout error
[ 6.734350] ld0d: error reading fsbn 0 of 0-31 (ld0 bn 0; cn 0 tn
0 sn 0), retrying
[ 7.254351] sdhc0: cmd timeout error
[ 7.294350] sdhc0: cmd timeout error
[ 7.334350] ld0d: error reading fsbn 0 of 0-31 (ld0 bn 0; cn 0 tn
0 sn 0), retrying
[ 7.854351] sdhc0: cmd timeout error
[ 7.894351] sdhc0: cmd timeout error
[ 7.934351] ld0d: error reading fsbn 0 of 0-31 (ld0 bn 0; cn 0 tn
0 sn 0), retrying
[ 8.454352] sdhc0: cmd timeout error
[ 8.494351] sdhc0: cmd timeout error
[ 8.534351] ld0d: error reading fsbn 0 of 0-31 (ld0 bn 0; cn 0 tn
0 sn 0), retrying
[ 9.054352] sdhc0: cmd timeout error
[ 9.094352] sdhc0: cmd timeout error
[ 9.134352] ld0d: error reading fsbn 0 of 0-31 (ld0 bn 0; cn 0 tn
0 sn 0), retrying
[ 9.654353] sdhc0: cmd timeout error
[ 9.694352] sdhc0: cmd timeout error
[ 9.734352] ld0d: error reading fsbn 0 of 0-31 (ld0 bn 0; cn 0 tn 0 sn =
0)
[ 9.764352] sdhc0: cmd timeout error
[ 9.804352] ld0d: error reading fsbn 1 (ld0 bn 1; cn 0 tn 0 sn 1), retr=
ying
[ 10.324354] sdhc0: cmd timeout error
[ 10.364353] ld0d: error reading fsbn 1 (ld0 bn 1; cn 0 tn 0 sn 1), retr=
ying
[ 10.884354] sdhc0: cmd timeout error
[ 10.924354] ld0d: error reading fsbn 1 (ld0 bn 1; cn 0 tn 0 sn 1), retr=
ying
[ 11.444355] sdhc0: cmd timeout error
[ 11.484354] ld0d: error reading fsbn 1 (ld0 bn 1; cn 0 tn 0 sn 1), retr=
ying
[ 12.004355] sdhc0: cmd timeout error
[ 12.044355] ld0d: error reading fsbn 1 (ld0 bn 1; cn 0 tn 0 sn 1), retr=
ying
[ 12.564356] sdhc0: cmd timeout error
[ 12.604355] ld0d: error reading fsbn 1 (ld0 bn 1; cn 0 tn 0 sn 1)
[ 12.634355] sdhc0: cmd timeout error
[ 12.674355] ld0: unable to flush cache
[ 12.704354] ld0: 4-bit width, HS200, 4096 KB cache, 200.000 MHz
[ 12.734354] swwdog0: software watchdog initialized
[ 12.754355] sdhc0: cmd timeout error
[ 12.784356] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 13.314356] sdhc0: cmd timeout error
[ 13.354356] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 13.874357] sdhc0: cmd timeout error
[ 13.914356] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 14.434357] sdhc0: cmd timeout error
[ 14.474357] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 14.994358] sdhc0: cmd timeout error
[ 15.034357] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 15.554358] sdhc0: cmd timeout error
[ 15.594356] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0)
[ 15.624357] sdhc0: cmd timeout error
[ 15.664358] sdhc0: cmd timeout error
[ 15.704358] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 16.224360] sdhc0: cmd timeout error
[ 16.264357] sdhc0: cmd timeout error
[ 16.304358] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 16.824360] sdhc0: cmd timeout error
[ 16.864359] sdhc0: cmd timeout error
[ 16.904359] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 17.424361] sdhc0: cmd timeout error
[ 17.464359] sdhc0: cmd timeout error
[ 17.504360] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 18.024361] sdhc0: cmd timeout error
[ 18.064360] sdhc0: cmd timeout error
[ 18.104360] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 18.624362] sdhc0: cmd timeout error
[ 18.664361] sdhc0: cmd timeout error
[ 18.704361] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0 sn 0=
)
[ 18.734360] autoconfiguration error: match_bootwedge: unable to
read block 1 of dev ld0 (60)
[ 18.764361] sdhc0: cmd timeout error
[ 18.804361] ld0: unable to flush cache
[ 18.854361] sdhc0: cmd timeout error
[ 18.894361] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 19.414362] sdhc0: cmd timeout error
[ 19.454360] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 19.974362] sdhc0: cmd timeout error
[ 20.014362] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 20.534363] sdhc0: cmd timeout error
[ 20.574362] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 21.094364] sdhc0: cmd timeout error
[ 21.134363] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 21.654364] sdhc0: cmd timeout error
[ 21.694362] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0)
[ 21.724362] sdhc0: cmd timeout error
[ 21.764363] sdhc0: cmd timeout error
[ 21.804363] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 22.324365] sdhc0: cmd timeout error
[ 22.364365] sdhc0: cmd timeout error
[ 22.404364] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 22.924366] sdhc0: cmd timeout error
[ 22.964365] sdhc0: cmd timeout error
[ 23.004365] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 23.524366] sdhc0: cmd timeout error
[ 23.564364] sdhc0: cmd timeout error
[ 23.604365] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 24.124367] sdhc0: cmd timeout error
[ 24.164366] sdhc0: cmd timeout error
[ 24.204366] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0
sn 0), retrying
[ 24.724367] sdhc0: cmd timeout error
[ 24.764366] sdhc0: cmd timeout error
[ 24.804366] ld0d: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0 sn 0=
)
[ 24.834366] sdhc0: cmd timeout error
[ 24.874366] ld0: unable to flush cache
[ 24.914366] sdhc0: cmd timeout error
[ 24.954365] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 25.484368] sdhc0: cmd timeout error
[ 25.524373] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 26.044368] sdhc0: cmd timeout error
[ 26.084367] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 26.604369] sdhc0: cmd timeout error
[ 26.644368] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 27.164369] sdhc0: cmd timeout error
[ 27.204367] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 27.724370] sdhc0: cmd timeout error
[ 27.764369] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0)
[ 27.794368] sdhc0: cmd timeout error
[ 27.834369] ld0: unable to flush cache
[ 27.834369] sdhc0: cmd timeout error
[ 27.851594] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 28.344370] sdhc0: cmd timeout error
[ 28.355515] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 28.854371] sdhc0: cmd timeout error
[ 28.865516] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 29.364371] sdhc0: cmd timeout error
[ 29.375510] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 29.874372] sdhc0: cmd timeout error
[ 29.885516] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retr=
ying
[ 30.384372] sdhc0: cmd timeout error
[ 30.395518] ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0)
[ 30.395518] sdhc0: cmd timeout error
[ 30.407816] sdhc0: cmd timeout error
[ 30.418935] ld0d: error reading fsbn 32 of 32-33 (ld0 bn 32; cn 0
tn 0 sn 32), retrying
[ 30.914372] sdhc0: cmd timeout error
[ 30.925517] sdhc0: cmd timeout error
[ 30.936635] ld0d: error reading fsbn 32 of 32-33 (ld0 bn 32; cn 0
tn 0 sn 32), retrying
[ 31.434373] sdhc0: cmd timeout error
[ 31.445501] sdhc0: cmd timeout error
[ 31.456600] ld0d: error reading fsbn 32 of 32-33 (ld0 bn 32; cn 0
tn 0 sn 32), retrying
[ 31.954373] sdhc0: cmd timeout error
[ 31.965517] sdhc0: cmd timeout error
[ 31.976633] ld0d: error reading fsbn 32 of 32-33 (ld0 bn 32; cn 0
tn 0 sn 32), retrying
[ 32.324374] acpibat0: normal capacity on 'charge state'
[ 32.474374] sdhc0: cmd timeout error
[ 32.485536] sdhc0: cmd timeout error
[ 32.496658] ld0d: error reading fsbn 32 of 32-33 (ld0 bn 32; cn 0
tn 0 sn 32), retrying
[ 32.994374] sdhc0: cmd timeout error
[ 33.005500] sdhc0: cmd timeout error
[ 33.016619] ld0d: error reading fsbn 32 of 32-33 (ld0 bn 32; cn 0
tn 0 sn 32)
[ 33.016619] sdhc0: cmd timeout error
[ 33.028944] ld0: unable to flush cache
[ 33.034390] WARNING: 4 errors while detecting hardware; check system lo=
g.
[ 33.034390] boot device: sd0
[ 33.044793] root on dk1
[ 33.054374] root file system type: ffs
[ 33.064902] kern.module.path=3D/stand/amd64/10.1/modules
[ 33.064902] [drm] couldn't get memory information
[ 33.114373] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 33.154372] [drm] Driver supports precise vblank timestamp query.
[ 33.194373] i915drmkms0: interrupting at msi2 vec 0 (i915drmkms0)
[ 33.194373] i915drmkms0: notice: RC6 and powersaving disabled by BIOS
[ 33.204426] i915drmkms0: notice: Failed to load DMC firmware
i915/glk_dmc_ver1_04.bin. Disabling runtime power management.
[ 33.244374] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on mi=
nor 0
[ 33.774376] intelfb0 at i915drmkms0
[ 33.774376] [drm] DRM_I915_DEBUG enabled
[ 33.774376] [drm] DRM_I915_DEBUG_GEM enabled
[ 33.784631] intelfb0: framebuffer at 0x90040000, size 1920x1080,
depth 32, stride 7680
[ 33.804374] wsdisplay0 at intelfb0 kbdmux 1: console (default,
vt100 emulation), using wskbd0
[ 33.804374] wsmux1: connecting to wsdisplay0
[ 45.794386] wsmouse1: detached
[ 45.794386] ums0: detached
[ 45.794386] uhidev0: detached
[ 45.794386] uhidev0: at uhub1 port 6 (addr 3) disconnected
[ 45.794386] uhid2: detached
[ 45.794386] uhid1: detached
[ 45.794386] uhid0: detached
[ 45.794386] uhidev1: detached
[ 45.794386] uhidev1: at uhub1 port 6 (addr 3) disconnected
[ 50.434390] umass1 at uhub1 port 6 configuration 1 interface 0
[ 50.434390] umass1: USB (0x0781) SanDisk 3.2Gen1 (0x5581), rev
2.10/1.00, addr 6
[ 50.434390] umass1: using SCSI over Bulk-Only
[ 50.434390] scsibus1 at umass1: 2 targets, 1 lun per target
[ 50.434390] sd1 at scsibus1 target 0 lun 0: <USB, SanDisk 3.2Gen1,
1.00> disk removable
[ 50.484390] sd1: 29328 MB, 59587 cyl, 16 head, 63 sec, 512
bytes/sect x 60063744 sectors
[ 50.494390] sd1: GPT GUID: 33323032-3930-4232-b130-303632363036
[ 50.494390] dk2 at sd1: "ISOHybrid", 5254920 blocks at 64, type: ntfs
[ 50.494390] autoconfiguration error: sd1: error 22 adding entry 1
(33323032-3930-4232-b132-303632363036), type
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
[ 385.774697] dk2 at sd1 (ISOHybrid) deleted
[ 385.774697] sd1: detached
[ 385.774697] scsibus1: detached
[ 385.774697] umass1: detached
[ 385.774697] umass1: at uhub1 port 6 (addr 6) disconnected
[ 428.974735] umass1 at uhub1 port 6 configuration 1 interface 0
[ 428.974735] umass1: USB (0x0781) SanDisk 3.2Gen1 (0x5581), rev
2.10/1.00, addr 7
[ 428.974735] umass1: using SCSI over Bulk-Only
[ 428.974735] scsibus1 at umass1: 2 targets, 1 lun per target
[ 428.974735] sd1 at scsibus1 target 0 lun 0: <USB, SanDisk 3.2Gen1,
1.00> disk removable
[ 428.974735] sd1: 29328 MB, 59587 cyl, 16 head, 63 sec, 512
bytes/sect x 60063744 sectors
[ 551.774848] sd1(umass1:0:0:0): generic HBA error
[ 551.774848] sd1: autoconfiguration error: cache synchronization failed
[ 551.774848] sd1(umass1:0:0:0): generic HBA error
[ 551.774848] sd1(umass1:0:0:0): generic HBA error
[ 551.774848] sd1: detached
[ 551.774848] scsibus1: detached
[ 551.774848] umass1: detached
[ 551.774848] umass1: at uhub1 port 6 (addr 7) disconnected
[ 589.944882] umass1 at uhub1 port 6 configuration 1 interface 0
[ 589.944882] umass1: USB (0x0781) SanDisk 3.2Gen1 (0x5581), rev
2.10/1.00, addr 8
[ 589.944882] umass1: using SCSI over Bulk-Only
[ 589.944882] scsibus1 at umass1: 2 targets, 1 lun per target
[ 589.944882] sd1 at scsibus1 target 0 lun 0: <USB, SanDisk 3.2Gen1,
1.00> disk removable
[ 590.014881] sd1: 29328 MB, 59587 cyl, 16 head, 63 sec, 512
bytes/sect x 60063744 sectors
Best Regards, Hudson
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.47 2022/09/11 19:34:41 kim Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2025
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.
Home