NetBSD Problem Report #6207

Received: (qmail 8140 invoked from network); 27 Sep 1998 14:52:19 -0000
Message-Id: <199809271452.HAA06184@ldc-gw-cs.cs.wwu.EDU>
Date: Sun, 27 Sep 1998 07:52:09 -0700 (PDT)
From: grahaml@imperators.com
To: gnats-bugs@gnats.netbsd.org
Subject: TFTP boot.net (2nd stage loader) v1.7 does not recognize le(0,0,0) ethernet port. 
X-Send-Pr-Version: www-1.0

>Number:         6207
>Category:       port-sparc
>Synopsis:       TFTP boot.net (2nd stage loader) v1.7 does not recognize le(0,0,0) ethernet port.
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    port-sparc-maintainer
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Sep 27 08:05:00 +0000 1998
>Closed-Date:    Thu Jan 07 22:49:45 +0000 1999
>Last-Modified:  Thu Jan 07 22:51:08 +0000 1999
>Originator:     Graham Leach
>Release:        1.3.2
>Organization:
TIG-The Imperators Group
>Environment:
I cannot get uname -a to run.
I cannot load the kernel on the machine.

>Description:
I am trying to boot a Sun 4/380 with a boot.net file 
I retrieved from one of the NetBSD FTP sites:

Here's what happens when I try it:

<TURN SYSTEM ON>
<WAIT>
<WAIT SOME MORE>  :)

Sun SPARCsystem 300
ROM Rev 3.0.3 32MB memory intalled serial #15234
xx:xx:xx:xx:xx

>How-To-Repeat:
Easy.  

I just turn the machine on and type b le().  :)

>Fix:


>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: gnats-admin->port-sparc-maintainer 
Responsible-Changed-By: fair 
Responsible-Changed-When: Mon Dec 28 09:31:19 PST 1998 
Responsible-Changed-Why:  
This PR is the responsibility of the portmaster, 
not the GNATS database administrator. 
State-Changed-From-To: open->analyzed 
State-Changed-By: pk 
State-Changed-When: Wed Jan 6 14:58:28 PST 1999 
State-Changed-Why:  
The most likely cause is an improper bootparam setup on the server, despite 
the menacing 'cannot open le(0,0,0)' message. 

BTW. the source is in `sys/arch/sparc/stand'. 
State-Changed-From-To: analyzed->closed 
State-Changed-By: pk 
State-Changed-When: Thu Jan 7 14:49:45 PST 1999 
State-Changed-Why:  
Confirmed to be a bootparam service setup problem. 
>Unformatted:
 >b le()
 Using IP Address xxx.xxx.xxx.xxx
 Boot:le(0,0,0)
 Booting from tftp server at xxx.xxx.xxx.xxx
 Downloaded 43784 bytes from tftpserver

 >>NetBSD/sparc Secondary Boot, Revision 1.7
 >> (pk@flambard), Fri Jan 2 00:10:58 MET 1998
 Using IP Address xxx.xxx.xxx.xxx
 bootparamd: `whoami' call failed
 Can't open network device `le(0,0,0)'
 open: netbsd: Unknown error: code 60

 I don't know if this is a result of the failed call to resolve
 the hostname from bootparamd or not.  What it seems to be saying
 is that it doesn't understand the Lance Ethernet device, which is
 on the list of supported hardware.

 I will continue to work on bootparamd until the machine can resolve
 it's hostname, but am not sure if that is the problem.  By the way,
 where is the source for boot.net?  It would have been much easier
 to try to figure out what's going on had I been able to get an idea
 of what 

 open: netbsd: Unknown error: code 60

 meant.

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.