NetBSD Problem Report #7367

Received: (qmail 8887 invoked from network); 12 Apr 1999 16:16:01 -0000
Message-Id: <199904121615.LAA04407@fezzik.endicor.com>
Date: Mon, 12 Apr 1999 11:15:55 -0500 (CDT)
From: Ty Sarna <tsarna@endicor.com>
Reply-To: tsarna@endicor.com
To: gnats-bugs@gnats.netbsd.org
Subject: 1.4_ALPHA/i386 installation findings
X-Send-Pr-Version: 3.95

>Number:         7367
>Category:       install
>Synopsis:       1.4_ALPHA/i386 installation findings
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    install-manager
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Apr 12 09:20:03 +0000 1999
>Closed-Date:    Mon Dec 18 03:27:55 +0000 2000
>Last-Modified:  Mon Dec 18 03:27:55 +0000 2000
>Originator:     Ty Sarna
>Release:        1.4_ALPHA
>Organization:
	Endicor Technologies, Inc., San Antonio, Texas
>Environment:

Asus PCI/I-486SP3G, AMD 486DX4-100, Quantum Fireball 1080S,
1.4_ALPHA snapshot, fresh install over Windows '95

>Description:
	I tried a fresh, full-disk install over W95 on the above
	machine. Here's what I found:

	- Display corruption while running commands. The window commands
	  run in was missing parts of its right edge, and the text above
          was garbled in several ways (failed to erase previous text
	  before drawing, addition of extranious text, intended text
	  seemed to be missing several characters at the start, etc.

	  While this doesn't interfere with the install, it looks *so*
          bad as a first impression, and may cause people to give up
	  right then.

	- Unable to fetch sets, due to single quotes ("unable to contact
	  host 'ftp"). I believe I saw that this has already been fixed.

	- After fetching sets and unpacking by hand, on rebooting
	  the BIOS reported that the partition table was invalid.
	  Investigation showed that there were two active partitions:

		0: sysid 0 (unused)
		    start 62, size 0 (0 MB), flag 0x80
		        beg: cylinder    0, head   1, sector  1
		        end: cylinder 1011, head  33, sector 62
		1: <UNUSED>
		2: <UNUSED>
		3: sysid 169 (NetBSD)
		    start 62, size 2133234 (1041 MB), flag 0x80
		        beg: cylinder    0, head   1, sector  1
		        end: cylinder 1012, head   0, sector  1

	  (note, the above transcription is probably not
	  letter-for-letter accurate, but the essential
	  informtion is correct)

	- Comment: since wscons is now the default, should the install
	  disk use it too? Might it help with the curses display
	  corruption?
>How-To-Repeat:
	See above.
>Fix:
	Unknown.
>Release-Note:
>Audit-Trail:

From: Manuel Bouyer <bouyer@antioche.lip6.fr>
To: tsarna@endicor.com
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: install/7367: 1.4_ALPHA/i386 installation findings
Date: Wed, 14 Apr 1999 18:12:05 +0200

 I think I adressed most of these concerns with the changes I made to the head.
 Just need to pull them up ...

 On Apr 12, Ty Sarna wrote
 > 
 > >Description:
 > 	I tried a fresh, full-disk install over W95 on the above
 > 	machine. Here's what I found:
 > 
 > 	- Display corruption while running commands. The window commands
 > 	  run in was missing parts of its right edge, and the text above
 >           was garbled in several ways (failed to erase previous text
 > 	  before drawing, addition of extranious text, intended text
 > 	  seemed to be missing several characters at the start, etc.
 > 
 > 	  While this doesn't interfere with the install, it looks *so*
 >           bad as a first impression, and may cause people to give up
 > 	  right then.

 Not easy to fix. I added some wclear()/wrefresh() at various places,
 display now looks almost OK for installs and upgrades.
 The strange things is that they only occurs with PC3, not in an xterm,
 or wscons in vt100 or sun emulation. A bug in the pc driver, or pc3 termcap ?

 > 
 > 	- Unable to fetch sets, due to single quotes ("unable to contact
 > 	  host 'ftp"). I believe I saw that this has already been fixed.

 Fixed on the branch as well

 > 
 > 	- After fetching sets and unpacking by hand, on rebooting
 > 	  the BIOS reported that the partition table was invalid.
 > 	  Investigation showed that there were two active partitions:
 > 
 > 		0: sysid 0 (unused)
 > 		    start 62, size 0 (0 MB), flag 0x80
 > 		        beg: cylinder    0, head   1, sector  1
 > 		        end: cylinder 1011, head  33, sector 62
 > 		1: <UNUSED>
 > 		2: <UNUSED>
 > 		3: sysid 169 (NetBSD)
 > 		    start 62, size 2133234 (1041 MB), flag 0x80
 > 		        beg: cylinder    0, head   1, sector  1
 > 		        end: cylinder 1012, head   0, sector  1
 > 
 > 	  (note, the above transcription is probably not
 > 	  letter-for-letter accurate, but the essential
 > 	  informtion is correct)

 Fixed in the head.

 > 
 > 	- Comment: since wscons is now the default, should the install
 > 	  disk use it too? Might it help with the curses display
 > 	  corruption?

 It would probably avoid it, but it makes bigger kernels ...

 --
 Manuel Bouyer, LIP6, Universite Paris VI.           Manuel.Bouyer@lip6.fr
 --
Responsible-Changed-From-To: gnats-admin->install-manager 
Responsible-Changed-By: fair 
Responsible-Changed-When: Thu Jun 17 13:57:25 PDT 1999 
Responsible-Changed-Why:  
This PR is the responsibility of the NetBSD install bug manager, 
not the GNATS database administrator. 
State-Changed-From-To: open->closed 
State-Changed-By: hubertf 
State-Changed-When: Sun Dec 17 19:27:26 PST 2000 
State-Changed-Why:  
1.4 was superceded by 1.5. Please check it out! 


- Hubert 
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.