NetBSD Problem Report #8180
Received: (qmail 8793 invoked from network); 9 Aug 1999 16:58:22 -0000
Message-Id: <199908091658.CAA13166@merlin.reed.wattle.id.au>
Date: Tue, 10 Aug 1999 02:58:10 +1000 (EST)
From: darrenr@pobox.com
Reply-To: darrenr@pobox.com
To: gnats-bugs@gnats.netbsd.org
Subject: wsconscfg causes panic on booting NetBSD-1.4/alpha
X-Send-Pr-Version: 3.95
>Number: 8180
>Category: port-alpha
>Synopsis: wsconscfg causes panic on booting NetBSD-1.4/alpha
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-alpha-maintainer
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Mon Aug 09 10:05:02 +0000 1999
>Closed-Date: Mon Dec 06 20:03:56 +0000 1999
>Last-Modified: Mon Dec 06 20:04:51 +0000 1999
>Originator: Darren Reed
>Release: NetBSD-1.4
>Organization:
>Environment:
System: NetBSD ghalahad.reed.wattle.id.au 1.4 NetBSD 1.4 (GENERIC) alpha
>Description:
Booting up NetBSD-1.4/alpha on a pc164 with wsconscfg configured
to run and setup 4 vty's results in the following panic:
fatal kernel trap:
trap entry = 0x2 (memory management fault)
a0 = 0xf
a1 = 0x1
a2 = 0x0
pc = 0xfffffc000034a618
ra = 0xfffffc000034a9b0
curproc = 0xfffffc000149cb70
pid = 110, comm = wsconscfg
panic: trap
Stopped in wsconscfg at Debugger+0x4: ret zero,(ra)
db>
>How-To-Repeat:
Run wsconscfg (during bootup?) on an alpha (pc164 in this case),
using com1 as the console due to no keyboard being present.
>Fix:
>Release-Note:
>Audit-Trail:
From: Matthias Drochner <M.Drochner@fz-juelich.de>
To: darrenr@pobox.com
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: port-alpha/8180: wsconscfg causes panic on booting
NetBSD-1.4/alpha
Date: Wed, 10 Nov 1999 18:37:38 +0100
> Booting up NetBSD-1.4/alpha on a pc164 with wsconscfg configured
> to run and setup 4 vty's results in the following panic:
Must have been a temporary lossage.
Can you reproduce it?
best regards
Matthias
From: Darren Reed <darrenr@reed.wattle.id.au>
To: M.Drochner@fz-juelich.de
Cc: darrenr@pobox.com, gnats-bugs@gnats.netbsd.org
Subject: Re: port-alpha/8180: wsconscfg causes panic on booting
Date: Sun, 14 Nov 1999 20:10:35 +1100 (EST)
In some email I received from Matthias Drochner, sie wrote:
>
>
> > Booting up NetBSD-1.4/alpha on a pc164 with wsconscfg configured
> > to run and setup 4 vty's results in the following panic:
>
> Must have been a temporary lossage.
> Can you reproduce it?
Not easily...I think your analysis is correct - temporary lossage.
State-Changed-From-To: open->closed
State-Changed-By: drochner
State-Changed-When: Mon Dec 6 12:03:56 PST 1999
State-Changed-Why:
most likely temporary lossage - submitter agreed to close
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.