NetBSD Problem Report #8294
Received: (qmail 24292 invoked from network); 30 Aug 1999 11:28:21 -0000
Message-Id: <199908301128.VAA00455@napolitana.cs.mu.OZ.AU>
Date: Mon, 30 Aug 1999 21:28:18 +1000 (EST)
From: kre@munnari.OZ.AU
To: gnats-bugs@gnats.netbsd.org
Subject: 3c905B-TX phy/media detection fixes
X-Send-Pr-Version: 3.95
>Number: 8294
>Category: kern
>Synopsis: PHY is not found on recent 3c905B-TX cards
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: kern-bug-people
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Mon Aug 30 04:35:00 +0000 1999
>Closed-Date: Thu Sep 02 20:27:25 +0000 1999
>Last-Modified: Thu Sep 02 20:28:05 +0000 1999
>Originator: Robert Elz
>Release: NetBSD 1.4
>Organization:
University of Melbourne
>Environment:
System: NetBSD napolitana.cs.mu.OZ.AU 1.4 NetBSD 1.4 (LAVENDER) #16: Sat Aug 21 15:34:27 EST 1999 root@napolitana.cs.mu.OZ.AU:/usr/src/sys/arch/alpha/compile/LAVENDER alpha
>Description:
Recent 3Com 3C905B-TX cards are recognised by the kernel,
but no PHY is located, hence no media are available, and
while the interface appears to (kind of0 work, no packets
are sent or received.
>How-To-Repeat:
Obtain a recent 3C905B-TX, install it, configure it, and boot.
Observe the boot messages as ...
ex1 at pci0 dev 15 function 0: 3Com 3c905B-TX 10/100 Ethernet
ex1: interrupting at irq 5
ex1: MAC address 00:10:5a:76:e9:b4
where what is expected is
ex0 at pci0 dev 9 function 0: 3Com 3c905B-TX 10/100 Ethernet
ex0: interrupting at eb164 irq 3
ex0: MAC address 00:10:5a:76:5f:06
ukphy0 at ex0 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0012, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
or something like that (yes, Ok, those are from different boards
in different systems, but that's what happens anyway...).
>Fix:
Apply the following patch in /sys/dev/ic
There are three parts to this patch - first a one line
addition to elinkxlreg.h to define one new symbol (other
values like this are in elink3reg.h - but this is a 905B
only define, other such defines are in the xl header file)
Then there's code which writes the internal config register
depending upon the media capabilities of the board.
And last, the low leval phy i/o routines were altered a bit.
The first of those 3 is just to make the second compile (and
avoid magic numbers in .c files). Both of the others seem
necessary to get this board to recognise the PHY. Neither
alone is sufficient. However, the 3rd change contains a
number of smaller parts (changing which bits are set, changing
the order things are done, and inserting delays) - whether all
of that is needed or not I don't know, I have tested only all
or nothing of that set.
All of this comes from the FreeBSD driver (if_xl.c) from the
FreeBSD 3.2 sources. There are many other differences (of
some substance, and vastly many more of form only) between the
NetNBSD and FreeBSD drivers. Someone with access to 3Com doc
really needs to do a lot of hard looking at this driver.
This has been tested on i386 (with both 3C900B-TPC and 3C905B-TX
cards - nothing here should have affected the 3C900 code, and
none of it seems to), and on alpha (3C905B-TX only). Testing
is needed on other cards of the family. Also, so far I have
tested only 10BaseT connections (hdx). This fix was developed
on an i386 platform, then once working there, was copied to the
alpha, where it worked first time.
ps: take no notice of the various dates below, the alpha
that generated the diffs was switched back & forth between
FreeBSD and NetBSD while this was being done (FreeBSD was
needed to get the fixed files across the net) -- the two of
them fail to agree on how the date should be represented in
the TODR. Whatever the dates look like, these diffs are not
reversed, or anything strange like that.
*** elinkxlreg.h.was Wed Nov 4 11:29:29 1998
--- elinkxlreg.h Sat Aug 21 15:31:36 1999
***************
*** 177,182 ****
--- 177,184 ----
#define CONFIG_XCVR_SEL (u_int16_t) 0x00f0
#define CONFIG_XCVR_SEL_SHIFT 4
+ #define ELINKMEDIA_AUTO 8
+
#define CONFIG_AUTOSEL (u_int16_t) 0x0100
#define CONFIG_AUTOSEL_SHIFT 8
*** elinkxl.c.was Mon Aug 30 20:47:16 1999
--- elinkxl.c Sat Aug 21 15:31:36 1999
***************
*** 382,387 ****
--- 382,403 ----
/*
* Find PHY, extract media information from it.
*/
+ u_int32_t icfg;
+
+ /* stolen from FreeBSD xl driver */
+ GO_WINDOW(3);
+ icfg = bus_space_read_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG);
+ icfg &= ~(CONFIG_XCVR_SEL << 16);
+ if (val & (ELINK_MEDIACAP_MII | ELINK_MEDIACAP_100BASET4))
+ icfg |= ELINKMEDIA_MII << (CONFIG_XCVR_SEL_SHIFT + 16);
+ if (val & ELINK_MEDIACAP_100BASETX)
+ icfg |= ELINKMEDIA_AUTO << (CONFIG_XCVR_SEL_SHIFT + 16);
+ if (val & ELINK_MEDIACAP_100BASEFX)
+ icfg |= ELINKMEDIA_100BASE_FX
+ << (CONFIG_XCVR_SEL_SHIFT + 16);
+ bus_space_write_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG, icfg);
+ /* end steal */
+
mii_phy_probe(&sc->sc_dev, &sc->ex_mii, 0xffffffff);
if (LIST_FIRST(&sc->ex_mii.mii_phys) == NULL) {
ifmedia_add(&sc->ex_mii.mii_media, IFM_ETHER|IFM_NONE,
***************
*** 1714,1746 ****
bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_PHYSMGMT, 0);
! ex_mii_clrbit(sc, ELINK_PHY_DIR);
for (i = 0; i < 32; i++) {
- ex_mii_clrbit(sc, ELINK_PHY_CLK);
ex_mii_setbit(sc, ELINK_PHY_CLK);
}
ex_mii_writebits(sc, MII_COMMAND_START, 2);
ex_mii_writebits(sc, MII_COMMAND_READ, 2);
ex_mii_writebits(sc, phy, 5);
ex_mii_writebits(sc, reg, 5);
! ex_mii_clrbit(sc, ELINK_PHY_DIR);
! ex_mii_clrbit(sc, ELINK_PHY_CLK);
ex_mii_setbit(sc, ELINK_PHY_CLK);
! ex_mii_clrbit(sc, ELINK_PHY_CLK);
err = ex_mii_readbit(sc, ELINK_PHY_DATA);
- ex_mii_setbit(sc, ELINK_PHY_CLK);
for (i = 0; i < 16; i++) {
val <<= 1;
ex_mii_clrbit(sc, ELINK_PHY_CLK);
if (err == 0 && ex_mii_readbit(sc, ELINK_PHY_DATA))
val |= 1;
ex_mii_setbit(sc, ELINK_PHY_CLK);
}
ex_mii_clrbit(sc, ELINK_PHY_CLK);
ex_mii_setbit(sc, ELINK_PHY_CLK);
GO_WINDOW(1);
--- 1730,1775 ----
bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_PHYSMGMT, 0);
! ex_mii_setbit(sc, ELINK_PHY_DIR);
! delay(1);
! ex_mii_setbit(sc, ELINK_PHY_DIR|ELINK_PHY_DATA);
! delay(1);
!
for (i = 0; i < 32; i++) {
ex_mii_setbit(sc, ELINK_PHY_CLK);
+ delay(1);
+ ex_mii_clrbit(sc, ELINK_PHY_CLK);
+ delay(1);
}
ex_mii_writebits(sc, MII_COMMAND_START, 2);
ex_mii_writebits(sc, MII_COMMAND_READ, 2);
ex_mii_writebits(sc, phy, 5);
ex_mii_writebits(sc, reg, 5);
! ex_mii_clrbit(sc, ELINK_PHY_DATA|ELINK_PHY_CLK);
! delay(1);
ex_mii_setbit(sc, ELINK_PHY_CLK);
! delay(1);
! ex_mii_clrbit(sc, ELINK_PHY_DIR|ELINK_PHY_CLK);
! delay(1);
! ex_mii_setbit(sc, ELINK_PHY_CLK);
! delay(1);
err = ex_mii_readbit(sc, ELINK_PHY_DATA);
for (i = 0; i < 16; i++) {
val <<= 1;
ex_mii_clrbit(sc, ELINK_PHY_CLK);
+ delay(1);
if (err == 0 && ex_mii_readbit(sc, ELINK_PHY_DATA))
val |= 1;
ex_mii_setbit(sc, ELINK_PHY_CLK);
+ delay(1);
}
ex_mii_clrbit(sc, ELINK_PHY_CLK);
+ delay(1);
ex_mii_setbit(sc, ELINK_PHY_CLK);
+ delay(1);
GO_WINDOW(1);
***************
*** 1756,1770 ****
int i;
ex_mii_setbit(sc, ELINK_PHY_DIR);
for (i = 1 << (nbits -1); i; i = i >> 1) {
- ex_mii_clrbit(sc, ELINK_PHY_CLK);
- ex_mii_readbit(sc, ELINK_PHY_CLK);
if (data & i)
ex_mii_setbit(sc, ELINK_PHY_DATA);
else
ex_mii_clrbit(sc, ELINK_PHY_DATA);
ex_mii_setbit(sc, ELINK_PHY_CLK);
- ex_mii_readbit(sc, ELINK_PHY_CLK);
}
}
--- 1785,1801 ----
int i;
ex_mii_setbit(sc, ELINK_PHY_DIR);
+ ex_mii_clrbit(sc, ELINK_PHY_CLK);
+
for (i = 1 << (nbits -1); i; i = i >> 1) {
if (data & i)
ex_mii_setbit(sc, ELINK_PHY_DATA);
else
ex_mii_clrbit(sc, ELINK_PHY_DATA);
+ delay(1);
+ ex_mii_clrbit(sc, ELINK_PHY_CLK);
+ delay(1);
ex_mii_setbit(sc, ELINK_PHY_CLK);
}
}
***************
*** 1780,1789 ****
GO_WINDOW(4);
! ex_mii_clrbit(sc, ELINK_PHY_DIR);
for (i = 0; i < 32; i++) {
! ex_mii_clrbit(sc, ELINK_PHY_CLK);
! ex_mii_setbit(sc, ELINK_PHY_CLK);
}
ex_mii_writebits(sc, MII_COMMAND_START, 2);
ex_mii_writebits(sc, MII_COMMAND_WRITE, 2);
--- 1811,1825 ----
GO_WINDOW(4);
! ex_mii_setbit(sc, ELINK_PHY_DIR);
! delay(1);
! ex_mii_setbit(sc, ELINK_PHY_DIR|ELINK_PHY_DATA);
! delay(1);
for (i = 0; i < 32; i++) {
! ex_mii_setbit(sc, ELINK_PHY_CLK);
! delay(1);
! ex_mii_clrbit(sc, ELINK_PHY_CLK);
! delay(1);
}
ex_mii_writebits(sc, MII_COMMAND_START, 2);
ex_mii_writebits(sc, MII_COMMAND_WRITE, 2);
***************
*** 1792,1799 ****
ex_mii_writebits(sc, MII_COMMAND_ACK, 2);
ex_mii_writebits(sc, data, 16);
- ex_mii_clrbit(sc, ELINK_PHY_CLK);
ex_mii_setbit(sc, ELINK_PHY_CLK);
GO_WINDOW(1);
}
--- 1828,1838 ----
ex_mii_writebits(sc, MII_COMMAND_ACK, 2);
ex_mii_writebits(sc, data, 16);
ex_mii_setbit(sc, ELINK_PHY_CLK);
+ delay(1);
+ ex_mii_clrbit(sc, ELINK_PHY_CLK);
+ delay(1);
+ ex_mii_clrbit(sc, ELINK_PHY_DIR);
GO_WINDOW(1);
}
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed
State-Changed-By: fvdl
State-Changed-When: Thu Sep 2 13:27:25 PDT 1999
State-Changed-Why:
Fixed through patch supplied by submitter of PR>
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.