NetBSD Problem Report #8758
Received: (qmail 28943 invoked from network); 6 Nov 1999 17:37:15 -0000
Message-Id: <199911061736.SAA01853@newlaptoy.smd.ebone.net>
Date: Sat, 6 Nov 1999 18:36:28 +0100 (CET)
From: smd@ebone.net
Reply-To: smd@ebone.net
To: gnats-bugs@gnats.netbsd.org
Cc: smd@clock.org
Subject: sbdsp_halt_output: failed to halt
X-Send-Pr-Version: 3.95
>Number: 8758
>Category: port-i386
>Synopsis: sbdsp_halt_output whenever mpg123 or amp etc. stops playing (with on-board IBM Thinkpad 600 sound HW)
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: port-i386-maintainer
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sat Nov 06 09:39:01 +0000 1999
>Closed-Date: Sun Jan 20 11:46:28 +0000 2002
>Last-Modified: Sun Jan 20 11:46:28 +0000 2002
>Originator: Sean Doran
>Release: 19991006
>Organization:
Ebone A/S
>Environment:
System: NetBSD newlaptoy.smd.ebone.net 1.4M NetBSD 1.4M (NEWLAPTOY) #0: Sat Nov 6 07:56:46 EST 1999 smd@newlaptoy.smd.ebone.net:/usr/src/sys/arch/i386/compile/NEWLAPTOY i386
...
Cirrus Logic CS4610 SoundFusion Audio Accelerator (audio multimedia, revision 0x
01) at pci0 dev 6 function 0 not configured
...
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.02
audio0 at sb0: half duplex
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
...
sbdsp_halt_output: failed to halt
sbdsp_halt_output: failed to halt
sbdsp_halt_output: failed to halt
sbdsp_halt_output: failed to halt
sbdsp_halt_output: failed to halt
sbdsp_halt_output: failed to halt
sbdsp_halt_output: failed to halt
>Description:
sbdsp_halt_output: failed to halt messages happen when /dev/audio
closed by mpg123 or amp or audioplay
>How-To-Repeat:
play something with mpg123, amp or audioplay
>Fix:
>Release-Note:
>Audit-Trail:
From: root@ihack.net (Charles M. Hannum)
To: smd@ebone.net
Cc: gnats-bugs@gnats.netbsd.org, smd@clock.org
Subject: Re: port-i386/8758: sbdsp_halt_output: failed to halt
Date: 06 Nov 1999 16:48:21 -0500
This is a slight glitch in SB Pro handling. It's harmless, and I'll
fix it soon.
However, the fact that you noticed it indicates that you're using your
sound device in 8-bit SB emulation mode, which is probably not what
you really want. Most of these devices emulate either a `wss' or a
`ym', and you'll get better results with those drivers.
From: Sean Doran <smd@ebone.net>
To: root@ihack.net, smd@ebone.net
Cc: gnats-bugs@gnats.netbsd.org, smd@clock.org
Subject: Re: port-i386/8758: sbdsp_halt_output: failed to halt
Date: Sun, 7 Nov 1999 03:58:55 +0100 (CET)
| This is a slight glitch in SB Pro handling. It's harmless, and I'll
| fix it soon.
Ok, thought so.
| However, the fact that you noticed it indicates that you're using your
| sound device in 8-bit SB emulation mode, which is probably not what
| you really want. Most of these devices emulate either a `wss' or a
| `ym', and you'll get better results with those drivers.
Well, GENERIC doesn't see wss, nor does a GENERIC minus sb and
with "wss ... flags 1".
NT sees it OK. It (NT) had seen irq 5 dma 1 dma2 0 port 0x530,
but I used the IBM Thinkpad config utility to make it irq 10 dma 0
dma2 1 port 0x530, and still no go for NetBSD. -:(
Likewise, isapnp sees nothing ever, and ym can't attach to isa rather
than isapnp, so no go there either.
Sean.
From: root@ihack.net (Charles M. Hannum)
To: Sean Doran <smd@ebone.net>
Cc: root@ihack.net, gnats-bugs@gnats.netbsd.org, smd@clock.org
Subject: Re: port-i386/8758: sbdsp_halt_output: failed to halt
Date: 06 Nov 1999 23:21:05 -0500
Sean Doran <smd@ebone.net> writes:
> | This is a slight glitch in SB Pro handling. It's harmless, and I'll
> | fix it soon.
>
> Ok, thought so.
>
> | However, the fact that you noticed it indicates that you're using your
> | sound device in 8-bit SB emulation mode, which is probably not what
> | you really want. Most of these devices emulate either a `wss' or a
> | `ym', and you'll get better results with those drivers.
>
> Well, GENERIC doesn't see wss, nor does a GENERIC minus sb and
> with "wss ... flags 1".
>
> NT sees it OK. It (NT) had seen irq 5 dma 1 dma2 0 port 0x530,
> but I used the IBM Thinkpad config utility to make it irq 10 dma 0
> dma2 1 port 0x530, and still no go for NetBSD. -:(
Ah. There's a known bug in the Thinkpad BIOS. Try configuring a wss
at 0x52c.
From: Sean Doran <smd@ebone.net>
To: root@ihack.net, smd@ebone.net
Cc: gnats-bugs@gnats.netbsd.org, smd@clock.org
Subject: Re: port-i386/8758: sbdsp_halt_output: failed to halt
Date: Sun, 7 Nov 1999 06:13:19 +0100 (CET)
| Ah. There's a known bug in the Thinkpad BIOS. Try configuring a wss
| at 0x52c.
Cool, that worked. Thanks!
Sean.
State-Changed-From-To: open->closed
State-Changed-By: fair
State-Changed-When: Sun Jan 20 03:46:13 PST 2002
State-Changed-Why:
I read this PR as being resolved.
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.