NetBSD Problem Report #8976
Received: (qmail 13928 invoked from network); 9 Dec 1999 18:05:21 -0000
Message-Id: <199912091805.TAA00920@lyssa.zhadum.de>
Date: Thu, 9 Dec 1999 19:05:19 +0100 (CET)
From: Matthias Scheler <tron@lyssa.zhadum.de>
Reply-To: tron@lyssa.zhadum.de
To: gnats-bugs@gnats.netbsd.org
Subject: USB transfers to 250MB zip drive cause massive driver failure
X-Send-Pr-Version: 3.95
>Number: 8976
>Category: kern
>Synopsis: USB transfers to 250MB zip drive cause massive driver failure
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: kern-bug-people
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Thu Dec 09 10:06:00 +0000 1999
>Closed-Date: Mon Jun 12 15:15:11 +0000 2000
>Last-Modified: Mon Jun 12 15:15:11 +0000 2000
>Originator: Matthias Scheler
>Release: 19991209
>Organization:
Matthias Scheler http://www.sighardstrasse.de/~tron/
>Environment:
System: NetBSD lyssa.zhadum.de 1.4P NetBSD 1.4P (LYSSA) #3: Thu Dec 9 18:44:32 CET 1999 tron@lyssa.zhadum.de:/src/sys/compile/LYSSA i386
>Description:
My system has got a logitech USB mouse and a 250MB Zip drive connected to the
USB hub integrated into my Eizo F67 monitor:
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 15
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at uhub0 port 1
uhub1: EIZO hub, class 9/0, rev 1.00/1.01, addr 2
uhub1: 5 ports with 5 removable, self powered
ugen0 at uhub1 port 1
ugen0: EIZO monitor, rev 1.00/1.01, addr 3
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: Iomega USB Zip 250, rev 1.10/1.00, addr 4
umass0: SCSI over Bulk-Only (iclass 8/6/80)
scsibus2 at umass0: 2 targets, 1 luns per target
ums0 at uhub1 port 5 configuration 1 interface 0
ums0: Logitech USB-PS/2 Mouse, rev 1.00/1.10, addr 5, iclass 3/1
ums0: 3 buttons and Z dir.
If I try to access the Zip drive I get corrupted data back - "ls" show
weird directory entries on the MS-DOS volume - and system starts to
repeat this kernel message in an endless loop:
uhub1: port error, giving up port 4
From time to a single instance of this error message appears, too:
uhub1: device problem, disabling port 4
It is not hardware problem because all the components work fine with
Windows 98.
>How-To-Repeat:
Boot a real current kernel and try to read data from a 250MB USB zip drive.
>Fix:
None provided.
>Release-Note:
>Audit-Trail:
From: Dan Winship <danw@MIT.EDU>
To: Matthias Scheler <tron@lyssa.zhadum.de>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/8976: USB transfers to 250MB zip drive cause massive driver failure
Date: Thu, 9 Dec 1999 16:28:05 -0500 (EST)
Does it work if you plug the zip drive into the computer directly? My
USB Zip drive says you're not supposed to plug it into a hub or
extension cable...
-- Dan
From: Matthias Scheler <tron@zhadum.de>
To: Dan Winship <danw@MIT.EDU>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/8976: USB transfers to 250MB zip drive cause massive driver failure
Date: Fri, 10 Dec 1999 20:09:59 +0100
On Thu, Dec 09, 1999 at 04:28:05PM -0500, Dan Winship wrote:
> Does it work if you plug the zip drive into the computer directly?
That only changes the error message:
umass0: Reset failed, IOERROR
umass0: Reset failed, IOERROR
> My> USB Zip drive says you're not supposed to plug it into a hub or
> extension cable...
Why does it work properly with Windows 98 in that case?
Kind regards
--
Matthias Scheler http://www.sighardstrasse.de/~tron/
From: Matthias Scheler <tron@zhadum.de>
To: gnats-bugs@gnats.netbsd.org
Cc: Subject: Re: kern/8976: USB transfers to 250MB zip drive cause massive driver failure
Date: Fri, 10 Dec 1999 20:32:10 +0100
Today I got a new message when I booted the system with a media in the
USB Zip drive:
uhci_device_bulk_transfer: not done, ii=0xf0869d20
--
Matthias Scheler http://www.sighardstrasse.de/~tron/
From: Matthias Scheler <tron@zhadum.de>
To: gnats-bugs@gnats.netbsd.org, kern-bug-people@netbsd.org
Cc: Subject: Re: kern/8976: USB transfers to 250MB zip drive cause massive driver failure
Date: Sun, 12 Dec 1999 18:58:22 +0100
On Thu, Dec 09, 1999 at 06:06:01PM -0000, gnats-bugs@gnats.netbsd.org wrote:
> Thank you very much for your problem report.
> It has the internal identification `kern/8976'.
> The individual assigned to look at your
> bug is: kern-bug-people (Kernel Bug People).
>
> >Category: kern
> >Responsible: kern-bug-people
> >Synopsis: USB transfers to 250MB zip drive cause massive driver failure
> >Arrival-Date: Thu Dec 9 10:06:00 1999
A "cvs update -D991121" in "src/sys/dev/usb" fixed the problem for me.
So one of the commits in the last three weeks must have broken the
USB stuff seriously.
--
Matthias Scheler http://www.sighardstrasse.de/~tron/
State-Changed-From-To: open->closed
State-Changed-By: tron
State-Changed-When: Mon Jun 12 08:14:48 PDT 2000
State-Changed-Why:
Problem is fixed in at least NetBSD-1.4Y.
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.