NetBSD Problem Report #9395
Received: (qmail 9926 invoked from network); 12 Feb 2000 00:30:30 -0000
Message-Id: <200002120030.BAA01934@lyssa.zhadum.de>
Date: Sat, 12 Feb 2000 01:30:26 +0100 (CET)
From: Matthias Scheler <tron@lyssa.zhadum.de>
Reply-To: tron@lyssa.zhadum.de
To: gnats-bugs@gnats.netbsd.org
Subject: IP address cannot be changed with "ifconfig"
X-Send-Pr-Version: 3.95
>Number: 9395
>Category: kern
>Synopsis: IP address cannot be changed with "ifconfig"
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: kern-bug-people
>State: closed
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Fri Feb 11 16:33:00 +0000 2000
>Closed-Date: Thu Jan 31 08:08:41 +0000 2002
>Last-Modified: Thu Jan 31 08:09:00 +0000 2002
>Originator: Matthias Scheler
>Release: 2000/02/10
>Organization:
Matthias Scheler http://www.sighardstrasse.de/~tron/
>Environment:
System: NetBSD lyssa.zhadum.de 1.4S NetBSD 1.4S (LYSSA) #0: Thu Feb 10 11:27:13 CET 2000 tron@lyssa.zhadum.de:/src/sys/compile/LYSSA i386
>Description:
During manual configuration of my NIC in single user mode I made typo in
the IP address. Several attempts to correct the IP address with "ifconfig"
failed: an "ifconfig" showed the correct address but TCP/IP didn't work.
At the beginning the network works fine:
tron@lyssa:~#ifconfig tl0
tl0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet autoselect (100baseTX)
status: active
inet 194.123.44.242 netmask 0xfffffff0 broadcast 194.123.44.255
inet6 tl0%fe80::208:c7ff:fea4:712f prefixlen 64 scopeid 0x1
tron@lyssa:~#ping -c 2 194.123.44.241
PING colwyn.zhadum.de (194.123.44.241): 56 data bytes
64 bytes from 194.123.44.241: icmp_seq=0 ttl=255 time=0.620 ms
64 bytes from 194.123.44.241: icmp_seq=1 ttl=255 time=0.291 ms
----colwyn.zhadum.de PING Statistics----
2 packets transmitted, 2 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.291/0.456/0.620/0.233 ms
Now I change the IP address to another free one:
tron@lyssa:~#ping -c 2 194.123.44.243
PING sandra.zhadum.de (194.123.44.243): 56 data bytes
----sandra.zhadum.de PING Statistics----
2 packets transmitted, 0 packets received, 100.0% packet loss
tron@lyssa:~#ifconfig tl0 inet 194.123.44.243 netmask 255.255.255.240
tron@lyssa:~#ping -c 2 194.123.44.241
PING colwyn.zhadum.de (194.123.44.241): 56 data bytes
----colwyn.zhadum.de PING Statistics----
2 packets transmitted, 0 packets received, 100.0% packet loss
The network is dead now. If I change the IP address back to the original
value "ping" will work again:
tron@lyssa:~#ifconfig tl0 inet 194.123.44.242 netmask 255.255.255.240
tron@lyssa:~#ping -c 2 194.123.44.241
PING colwyn.zhadum.de (194.123.44.241): 56 data bytes
64 bytes from 194.123.44.241: icmp_seq=0 ttl=255 time=0.314 ms
64 bytes from 194.123.44.241: icmp_seq=1 ttl=255 time=0.286 ms
----colwyn.zhadum.de PING Statistics----
2 packets transmitted, 2 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.286/0.300/0.314/0.020 ms
>How-To-Repeat:
1.) Boot a system to single user mode.
2.) "ifconfig" the primary network interface with a wrong IP address.
3.) Assign the correct IP address to the interface
4.) Try to "ping" a host.
>Fix:
Sorry, I don't know.
>Release-Note:
>Audit-Trail:
From: Thilo Manske <Thilo.Manske@HEH.Uni-Oldenburg.DE>
To: Matthias Scheler <tron@lyssa.zhadum.de>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9395: IP address cannot be changed with "ifconfig"
Date: Sat, 12 Feb 2000 06:49:57 +0100
On Sat, Feb 12, 2000 at 01:30:26AM +0100, Matthias Scheler wrote:
> At the beginning the network works fine:
>
> tron@lyssa:~#ifconfig tl0
> tl0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> media: Ethernet autoselect (100baseTX)
> status: active
> inet 194.123.44.242 netmask 0xfffffff0 broadcast 194.123.44.255
> inet6 tl0%fe80::208:c7ff:fea4:712f prefixlen 64 scopeid 0x1
> tron@lyssa:~#ping -c 2 194.123.44.241
> PING colwyn.zhadum.de (194.123.44.241): 56 data bytes
> 64 bytes from 194.123.44.241: icmp_seq=0 ttl=255 time=0.620 ms
> 64 bytes from 194.123.44.241: icmp_seq=1 ttl=255 time=0.291 ms
>
> ----colwyn.zhadum.de PING Statistics----
> 2 packets transmitted, 2 packets received, 0.0% packet loss
> round-trip min/avg/max/stddev = 0.291/0.456/0.620/0.233 ms
>
> Now I change the IP address to another free one:
>
> tron@lyssa:~#ping -c 2 194.123.44.243
> PING sandra.zhadum.de (194.123.44.243): 56 data bytes
Maybe you should try
"arp -d 194.123.44.243"
(and for every other entry added by this interface as well)
And if this still doesn't work
"arp -d <old-ip#-of-nic>"
as well.
Or just wait until the entries in the ARP cache are flushed.
(Maybe some magic is needed in ifconfig to flush the arp cache?)
Pretty annoying, but it works for me:
(Not in single user mode BTW)
# ifconfig epic0 10.2.0.2 netmask 255.255.255.0
# ping -c 1 -n 10.2.0.1
PING 10.2.0.1 (10.2.0.1): 56 data bytes
64 bytes from 10.2.0.1: icmp_seq=0 ttl=255 time=0.524 ms
[...]
# ifconfig epic0 10.2.0.3 netmask 255.255.255.0
# ping -c 1 -n 10.2.0.1
PING 10.2.0.1 (10.2.0.1): 56 data bytes
^C
[...]
# arp -d 10.2.0.1
# ping -c 1 -n 10.2.0.1
PING 10.2.0.1 (10.2.0.1): 56 data bytes
64 bytes from 10.2.0.1: icmp_seq=0 ttl=255 time=0.513 ms
[...]
--
Dies ist Thilos Unix Signature! Viel Spass damit.
From: Matthias Scheler <tron@zhadum.de>
To: Thilo Manske <Thilo.Manske@HEH.Uni-Oldenburg.DE>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9395: IP address cannot be changed with "ifconfig"
Date: Sat, 12 Feb 2000 12:11:28 +0100
On Sat, Feb 12, 2000 at 06:49:57AM +0100, Thilo Manske wrote:
> Maybe you should try
> "arp -d 194.123.44.243"
> (and for every other entry added by this interface as well)
>
> And if this still doesn't work
> "arp -d <old-ip#-of-nic>"
> as well.
Yes, deleting *all* ARP entries fixes the problem for me, too.
--
Matthias Scheler http://www.sighardstrasse.de/~tron/
From: Manuel Bouyer <bouyer@antioche.lip6.fr>
To: Matthias Scheler <tron@lyssa.zhadum.de>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9395: IP address cannot be changed with "ifconfig"
Date: Sun, 13 Feb 2000 18:49:52 +0100
On Sat, Feb 12, 2000 at 01:30:26AM +0100, Matthias Scheler wrote:
> [...]
>
> >How-To-Repeat:
> 1.) Boot a system to single user mode.
> 2.) "ifconfig" the primary network interface with a wrong IP address.
> 3.) Assign the correct IP address to the interface
> 4.) Try to "ping" a host.
I think you need to delete the one adress before assigning a new one:
ifconfig xxx aaa.bbb.ccc.ddd delete
Works for me. Now I'm not sure if ifconfig should automically do this,
or if the SIOCSIFADDR should fails if the adress already exists.
--
Manuel Bouyer <bouyer@antioche.eu.org>
--
From: Matthias Scheler <tron@zhadum.de>
To: Manuel Bouyer <bouyer@antioche.lip6.fr>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9395: IP address cannot be changed with "ifconfig"
Date: Mon, 14 Feb 2000 09:52:51 +0100
On Sun, Feb 13, 2000 at 06:49:52PM +0100, Manuel Bouyer wrote:
> I think you need to delete the one adress before assigning a new one:
> ifconfig xxx aaa.bbb.ccc.ddd delete
No, that doesn't help. Only Thilo Manske's hint to remove all ARP entries
works for me.
Kind regards
--
Matthias Scheler http://www.sighardstrasse.de/~tron/
State-Changed-From-To: open->closed
State-Changed-By: itojun
State-Changed-When: Thu Jan 31 00:08:34 PST 2002
State-Changed-Why:
should have gone
From: itojun@itojun.org (Jun-ichiro itojun Hagino)
To: gnats-bugs@gnats.netbsd.org
Cc:
Subject: Re: kern/9395
Date: Thu, 31 Jan 2002 17:08:07 +0900 (JST)
the issue should have gone with recent changes to cloned routes.
itojun
>Unformatted:
(Contact us)
$NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026
The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.