NetBSD Problem Report #9429

Received: (qmail 23478 invoked from network); 16 Feb 2000 08:06:09 -0000
Message-Id: <200002160757.IAA22572@emmas.up-vision.de>
Date: Wed, 16 Feb 2000 08:57:43 +0100 (MET)
From: Martin Husemann <martin@emmas.up-vision.de>
Reply-To: martin@rumolt.teuto.de
To: gnats-bugs@gnats.netbsd.org
Subject: vr driver does not autoconfig media
X-Send-Pr-Version: 3.95

>Number:         9429
>Category:       kern
>Synopsis:       vr driver media autoselection does not work any more
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    kern-bug-people
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Feb 16 00:09:00 +0000 2000
>Closed-Date:    Fri Feb 18 08:25:54 +0000 2000
>Last-Modified:  Fri Feb 18 08:26:47 +0000 2000
>Originator:     Martin Husemann
>Release:        current supped a few hours ago
>Organization:

>Environment:
i386, D-Link Via Rhine card


>Description:

I've just upgraded my kernel from -current about two weeks old to todays
sup. I'm using a ViaRhine D-Link ethernet card (vr0) connected to either
a 10 base T HUB or via a crosslink cable to an Intel Ether Express (fxp0)
card. Currently it's connected to the 10 base T hub. Since it's changing,
I need to rely on media autosensing.

With the new kernel the card doesn't recognize the 10 base T connection, medi
is set to "none". When I use ifconfig to force it into 10baseT, the media
shown by ifconfig changes, but the card still does not work.

>How-To-Repeat:

Try to use above mentioned hardware with todays current.

>Fix:
n/a
>Release-Note:
>Audit-Trail:

From: "Martin Husemann" <martin@rumolt.teuto.de>
To: <gnats-bugs@gnats.netbsd.org>
Cc: "Matthias Scheler" <tron@zhadum.de>
Subject: RE: kern/9429: vr driver does not autoconfig media
Date: Fri, 18 Feb 2000 07:45:16 +0100

 Somebody please close this report.

 It stopped working because of some general IP bug introduced in
 sys/netinet/ip_input.c revision 1.98 (I think) and fixed in the meantime,
 using revision 1.101 brought my system up again.

 So the PR itself was wrong.

 The auto-sensing output may be misleading, but the card is definitively
 working.


 Martin

State-Changed-From-To: open->closed 
State-Changed-By: tron 
State-Changed-When: Fri Feb 18 00:25:54 PST 2000 
State-Changed-Why:  
Originator reports that problem was caused by a general TCP/IP bug which 
was fixed in the meantime. 
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.