NetBSD Problem Report #9701

Received: (qmail 15531 invoked from network); 29 Mar 2000 06:03:01 -0000
Message-Id: <200003290601.e2T61e405179@itojun.org>
Date: Wed, 29 Mar 2000 15:01:40 +0900 (JST)
From: itojun@itojun.org
Reply-To: itojun@itojun.org
To: gnats-bugs@gnats.netbsd.org
Subject: wi driver: 11M card does not show statistics on wiconfig -o
X-Send-Pr-Version: 3.95

>Number:         9701
>Category:       kern
>Synopsis:       wi driver: 11M card does not show statistics on wiconfig -o
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    kern-bug-people
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Mar 28 22:06:00 +0000 2000
>Closed-Date:    Tue Jul 04 05:07:36 +0000 2000
>Last-Modified:  Tue Jul 04 05:07:36 +0000 2000
>Originator:     Jun-ichiro itojun Hagino
>Release:        
>Organization:
	itojun.org
>Environment:
	using if_wi.c revision 1.6, backported to NetBSD 1.4.2 + KAME.
System: NetBSD lychee.itojun.org 1.4.2 NetBSD 1.4.2 (LYCHEE.v6) #809: Tue Mar 28 13:46:38 JST 2000 itojun@lychee.itojun.org:/export/home/itojun/k/kame/netbsd/sys/arch/i386/compile/LYCHEE.v6 i386
	Buffalo 11M card (which is OEM of Lucent card)

	I know NetBSD-current user has the same symptom, with Lucent 11M card.

>Description:
	wiconfig -o does not seem to work properly on 11M cards.

Transmitted unicast frames:		0
Transmitted multicast frames:		0
Transmitted fragments:			0
Transmitted unicast octets:		0
Transmitted multicast octets:		0
Single transmit retries:		0
Multiple transmit retries:		0
Transmit retry limit exceeded:		0
Transmit discards:			0
Transmit discards due to wrong SA:	0
Received unicast frames:		0
Received multicast frames:		0
Received fragments:			0
Received unicast octets:		0
Received multicast octets:		0
Receive FCS errors:			0
Receive discards due to no buffer:	0
Can't decrypt WEP frame:		0
Received message fragments:		0
Received message bad fragments:		0
>How-To-Repeat:
	% wiconfig -i wi0 -o
>Fix:
>Release-Note:
>Audit-Trail:

From: enami tsugutomo <enami@sm.sony.co.jp>
To: itojun@itojun.org
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9701: wi driver: 11M card does not show statistics on wiconfig -o
Date: 29 Mar 2000 15:18:32 +0900

 itojun@itojun.org writes:

 > >Synopsis:       wi driver: 11M card does not show statistics on wiconfig -o

 So, does anyone know whether it works with another type of card?

 # I'm wondering that whether it is related that wi_cmd() in wi_inquire
 # times out...
 enami.

From: enami tsugutomo <enami@sm.sony.co.jp>
To: itojun@itojun.org
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9701: wi driver: 11M card does not show statistics on wiconfig -o
Date: 03 Jul 2000 18:42:13 +0900

 itojun@itojun.org writes:

 > >Synopsis:       wi driver: 11M card does not show statistics on wiconfig -o

 Recently, I found that wiconfig -o works with if_wi.c rev 1.22 and
 Melco WLA-L11.  Is the behaviour depends on the station?

 enami.

From: itojun@iijlab.net
To: enami tsugutomo <enami@sm.sony.co.jp>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9701: wi driver: 11M card does not show statistics on wiconfig -o
Date: Mon, 03 Jul 2000 18:44:04 +0900

 >> >Synopsis:       wi driver: 11M card does not show statistics on wiconfig -o
 >Recently, I found that wiconfig -o works with if_wi.c rev 1.22 and
 >Melco WLA-L11.  Is the behaviour depends on the station?

 	i'll try to do it again when i go home.  thanks.

 itojun

From: itojun@iijlab.net
To: enami tsugutomo <enami@sm.sony.co.jp>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9701: wi driver: 11M card does not show statistics on wiconfig -o
Date: Tue, 04 Jul 2000 12:33:43 +0900

 >> >Synopsis:       wi driver: 11M card does not show statistics on wiconfig -o
 >Recently, I found that wiconfig -o works with if_wi.c rev 1.22 and
 >Melco WLA-L11.  Is the behaviour depends on the station?

 	I have the exactly the same card, but it does not work.
 	I'm using melco card against melco base station, on top of mostly
 	GENERIC i386 kernel.

 itojun


 itojun[starfruit:~] wiconfig wi0 -o
 Transmitted unicast frames:             0
 Transmitted multicast frames:           0
 Transmitted fragments:                  0
 Transmitted unicast octets:             0
 Transmitted multicast octets:           0
 Single transmit retries:                0
 Multiple transmit retries:              0
 Transmit retry limit exceeded:          0
 Transmit discards:                      0
 Transmit discards due to wrong SA:      0
 Received unicast frames:                0
 Received multicast frames:              0
 Received fragments:                     0
 Received unicast octets:                0
 Received multicast octets:              0
 Receive FCS errors:                     0
 Receive discards due to no buffer:      0
 Can't decrypt WEP frame:                0
 Received message fragments:             0
 Received message bad fragments:         0
 itojun[starfruit:~] netstat -in |grep wi0
 wi0   1500  <Link>        00:60:1d:f1:86:61       22     1       21     2     0
 wi0   1500  fe80::/64     fe80::260:1dff:fe       22     1       21     2     0
 itojun[starfruit:~] wiconfig wi0
 NIC serial number:                      [ 00UT01367048 ]
 Station name:                           [ NetBSD WaveLAN/IEEE node ]
 SSID for IBSS creation:                 [ NetBSD IBSS ]
 Current netname (SSID):                 [ 740EC9GROUP ]
 Desired netname (SSID):                 [  ]
 Current BSSID:                          [ 00:60:1d:22:e9:4f ]
 Channel list:                           [ 16383 ]
 IBSS channel:                           [ 14 ]
 Current channel:                        [ 14 ]
 Comms quality/signal/noise:             [ 43 99 56 ]
 Promiscuous mode:                       [ Off ]
 Port type (1=BSS, 3=ad-hoc):            [ 1 ]
 MAC address:                            [ 00:60:1d:f1:86:61 ]
 TX rate (selection):                    [ 3 ]
 TX rate (actual speed):                 [ 11 ]
 RTS/CTS handshake threshold:            [ 2347 ]
 Create IBSS:                            [ Off ]
 Access point density:                   [ 1 ]
 Power Mgmt (1=on, 0=off):               [ 0 ]
 Max sleep time:                         [ 100 ]
 WEP encryption:                         [ Off ]
 TX encryption key:                      [ 1 ]
 Encryption keys:                        [  ][  ][  ][  ]

 NetBSD 1.5B (STARFRUIT) #16: Mon Jul  3 06:29:52 JST 2000
     itojun@starfruit.itojun.org:/usr/home/itojun/NetBSD/src/sys/arch/i386/compile/STARFRUIT
 cpu0: family 6 model 8 step 3
 cpu0: Intel Pentium III (E) (686-class)
 total memory = 127 MB
 avail memory = 113 MB
 using 1658 buffers containing 6632 KB of memory
 BIOS32 rev. 0 found at 0xfd820
 mainbus0 (root)
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled
 pchb0 at pci0 dev 0 function 0
 pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
 ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga1 at pci1 dev 0 function 0: S3 Savage/IX+MV (rev. 0x11)
 wsdisplay0 at vga1: console (80x25, vt100 emulation)
 Texas Instruments PCI1450 PCI-CardBus Bridge (CardBus bridge, revision 0x03) at pci0 dev 2 function 0 not configured
 Texas Instruments PCI1450 PCI-CardBus Bridge (CardBus bridge, revision 0x03) at pci0 dev 2 function 1 not configured
 fxp0 at pci0 dev 3 function 0: Intel i82557 Ethernet, rev 9
 fxp0: interrupting at irq 11
 fxp0: Ethernet address 00:90:27:96:1c:e1, 10/100 Mb/s
 inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 Xircom product 0x000c (serial communications, interface 0x02) at pci0 dev 3 function 1 not configured
 clcs0 at pci0 dev 5 function 0: Cirrus Logic CS4280 CrystalClear Audio Interface (rev. 0x01)
 clcs0: interrupting at irq 11
 clcs0: AC97 read fail (VSTS==0) for add=0x7e
 clcs0: ac97_attach failed
 pcib0 at pci0 dev 7 function 0
 pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
 Intel 82371AB IDE controller (PIIX4) (IDE mass storage, interface 0x80, revision 0x01) at pci0 dev 7 function 1 not configured
 uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
 uhci0: interrupting at irq 11
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x03) at pci0 dev 7 function 3 not configured
 isa0 at pcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 wdc0 at isa0 port 0x1f0-0x1f7 irq 14
 wd0 at wdc0 channel 0 drive 0: <IBM-DBCA-206480>
 wd0: drive supports 16-sector pio transfers, lba addressing
 wd0: 6149 MB, 13328 cyl, 15 head, 63 sec, 512 bytes/sect x 12594960 sectors
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
 wdc1 at isa0 port 0x170-0x177 irq 15
 lpt2 at isa0 port 0x3bc-0x3bf: polled
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff: using exception 16
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
 pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
 pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
 pcmcia0 at pcic0 controller 0 socket 0
 pcmcia1 at pcic0 controller 0 socket 1
 isapnp0: no ISA Plug 'n Play devices found
 apm0 at mainbus0: Power Management spec V1.2
 biomask efed netmask efed ttymask ffef
 pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..5..7..9..10
 pcic0: using irq 3 for socket events
 IPsec: Initialized Security Association Processing.
 com3 at pcmcia0 function 0 port 0x2f8-0x2ff: serial device
 com3: ns16550a, working fifo
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 wi0 at pcmcia1 function 0 port 0x400-0x43f
 wi0: address 00:60:1d:f1:86:61
 pcmcia1: card irq 5
 wi0: timeout in wi_seek to ffff/0; last status ffff
 wi0: timeout in wi_seek to ffff/0; last status ffff

From: enami tsugutomo <enami@sm.sony.co.jp>
To: itojun@iijlab.net
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9701: wi driver: 11M card does not show statistics on wiconfig -o
Date: 04 Jul 2000 13:45:01 +0900

 itojun@iijlab.net writes:

 > >> >Synopsis:       wi driver: 11M card does not show statistics on wiconfig -o
 > >Recently, I found that wiconfig -o works with if_wi.c rev 1.22 and
 > >Melco WLA-L11.  Is the behaviour depends on the station?
 > 
 > 	I have the exactly the same card, but it does not work.
 > 	I'm using melco card against melco base station, on top of mostly
 > 	GENERIC i386 kernel.

 Let me clearify some point:
 - Is your base station the new one?  (i.e., the station which supports
   wep?).
 - It looks like the statistics are updated every 60sec or so.  Did you
   wait enough?

 > IBSS channel:                           [ 14 ]
 > Current channel:                        [ 14 ]

 Except the mac address or essid, the difference seems only channel (we
 use 7 at here) and use of WEP (we use it).

 > NetBSD 1.5B (STARFRUIT) #16: Mon Jul  3 06:29:52 JST 2000
 >     itojun@starfruit.itojun.org:/usr/home/itojun/NetBSD/src/sys/arch/i386/compile/STARFRUIT

 Even with GENERIC kernel of 1.5_ALAHA, I could retrieve statistics as
 follows:

 Transmitted unicast frames:		7
 Transmitted multicast frames:		0
 Transmitted fragments:			23
 Transmitted unicast octets:		770
 Transmitted multicast octets:		0
 Single transmit retries:		0
 Multiple transmit retries:		0
 Transmit retry limit exceeded:		0
 Transmit discards:			0
 Transmit discards due to wrong SA:	0
 Received unicast frames:		7
 Received multicast frames:		79
 Received fragments:			1261
 Received unicast octets:		984
 Received multicast octets:		11154
 Receive FCS errors:			0
 Receive discards due to no buffer:	0
 Can't decrypt WEP frame:		0
 Received message fragments:		0
 Received message bad fragments:		0

 enami.

From: itojun@iijlab.net
To: enami tsugutomo <enami@sm.sony.co.jp>
Cc: gnats-bugs@gnats.netbsd.org
Subject: Re: kern/9701: wi driver: 11M card does not show statistics on wiconfig -o
Date: Tue, 04 Jul 2000 14:00:47 +0900

 >> 	I have the exactly the same card, but it does not work.
 >> 	I'm using melco card against melco base station, on top of mostly
 >> 	GENERIC i386 kernel.
 >Let me clearify some point:
 >- Is your base station the new one?  (i.e., the station which supports
 >  wep?).

 	yes it is.  round-shaped one.

 >- It looks like the statistics are updated every 60sec or so.  Did you
 >  wait enough?

 	hmmm, i was not patient enough.  i see the numbers now.
 	i think the PR can be closed.

 itojun
State-Changed-From-To: open->closed 
State-Changed-By: itojun 
State-Changed-When: Mon Jul 3 22:07:12 PDT 2000 
State-Changed-Why:  
wiconfig -o values show up only after certain period of time (1 minute). 
I was not patient enough. 
>Unformatted:

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.51 2026/08/10 02:28:17 riastradh Exp $
$NetBSD: gnats_config.sh,v 1.10 2026/05/13 22:00:09 riastradh Exp $
Copyright © 1994-2026 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.